Experimental investigation on friction and squeezing of roof structure key blocks corner upon long-wall face

The coefficients of friction and squeezing of the key blocks comer in the roof structure of underground coalface are key factors to roof structure stability quantitative analysis. In this paper, through the special test of three-type corner friction and squeez- ing of real rock specimens, and physical simulation test on the roof key blocks of roof structure as well as the finite element calcula- tion of the corner stress distribution and failure mechanism, the characteristics of friction and squeezing of the roof key blocks comer are revealed. It is found that the friction angle of the roof key blocks corner is the residual friction angle, and the frictional angle of the roof key blocks is 22-32° (average 27°), so the friction coefficient is determined as 0.5. It also found the squeezing strength is less than the uniaxial strength, and the squeezing coefficient of the roof blocks corner is determined as 0.4. Based on the results, the ground control theory can be updated from qualitative analysis to quantitative analysis.

Using of Key Stratum Theory to Study the Structural Development of Roof Aquifer

During the underground mining of coal resources,overlying rocks on the roof of excavated tunnels will be destroyed due to ground pressure,and as a result,part of them will break and fall into the tunnels.How to determine the distribution of fractured areas and fissures presents a major problem for preserving the overlying aquifer.

F-structure model of overlying strata for dynamic disaster prevention in coal mine

The rupture and movement scope of overlying strata upon the longwall mining face increased sharply as the exploitation scale and degree growing recently,and the spatial structure formed by fractured strata became much more complex.The overlying strata above the working face and adjacent gobs would affect each other and move cooperatively because small pillar can hardly separate the connection of overlying strata between two workfaces,which leads to mining seismicity in the gob and induces rockburst disaster that named spatial structure instability rockburst in this paper.Based on the key stratum theory,the F-structure model was established to describe the overlying strata characteristic and rockburst mechanism of workface with one side of gob and the other side un-mined solid coal seam.The results show that F-structure in the gob will re-active and loss stability under the influence of neighboring mining,and fracture and shear slipping in the process of instability is the mechanism of the seismicity in the gob.The F-structure was divided into two categories that short-arm F and long-arm F structure based on the state of strata above the gob.We studied the underground pressure rules of different F-structure and instability mechanism,thus provide the guide for prevention and control of the F-structure spatial instability rockburst.The micro-seismic system is used for on-site monitoring and researching the distribution rules of seismic events,the results confrmed the existence and correct of F-spatial structure.At last specialized methods for prevention seismicity and rockburst induced by F-structure instability are proposed and applied in Huating Coal Mine.

Arc-length technique for nonlinear finite element analysis

Nonlinear solution of reinforced concrete structures, particularly complete load-deflection response, requires tracing of the equilibrium path and proper treatment of the limit and bifurcation points. In this regard, ordinary solution techniques lead to instability near the limit points and also have problems in case of snap-through and snap-back. Thus they fail to predict the complete load-displacement response. The arc-length method serves the purpose well in principle, received wide acceptance in finite element analysis, and has been used extensively. However modifications to the basic idea are vital to meet the particular needs of the analysis. This paper reviews some of the recent developments of the method in the last two decades, with particular emphasis on nonlinear finite element analysis of reinforced concrete structures.

Constructions for key distribution patterns

Abstract Key distribution patterns （KDPs） are finite incidence structures satisfying a certain property which makes them widely used in minimizing the key storage and ensuring the security of communication between users in a large network. We construct a new KDP using t-design and combine two ω-KDPs to give new （ω- 1）-KDPs, which provide secure communication in a large network and minimize the amount of key storage.