An Investigation of Lighting Levels and Sleep Quality

Sleep quality in young adults is compromised. Instead of the recommended 7 hours, young adults’ schedule interruptions disturb sleep to a typical six and a half hours, with common disturbances in falling asleep and staying asleep. Recent literature has identified an association between academic performance, negative mood state and low activity level in young adults with sleep disturbances. Young adulthood is a time for the installation of sleep health. Both individual and schedule impositions to the young adults’ sleep schedule are to be modified to obtain Sleep Health. Recent research has identified daytime light effects on sleep such as blue light from electronics as alerting and low level light for relaxation. The aim of this study was to identify sleep quality effects with varying light exposures. It was hypothesized that bright (>450 lux) light conditions would be considered focusing and low light (<220 lux) would be considered calming. We hypothesized that sleep quality would improve by 5% with the introduction of a calm light condition. Undergraduates from a small midwestern university were invited to participate in the study in exchange for a gift card. Six participants completed the study, two males, four females all between 21 - 24 years old. Both hypotheses were supported by qualitative analysis.

Analysis of Current Research and Future Development Trends of Applying Solar Energy in Street Lighting

In the context of promoting green energy transition and addressing climate change globally,solar energy,as a clean and renewable energy source,has gradually become a hot topic for research.Solar streetlight systems realize energy self-sufficiency and environment-friendly lighting by integrating photovoltaic power generation technology and efficient LED lighting technology.By comprehensively analyzing the current status of the application of solar streetlights at home and abroad,this paper discusses its technical advantages,market penetration,and challenges in its development.In terms of technical characteristics,this paper focuses on analyzing the key technologies such as energy conversion efficiency and intelligent control systems of solar streetlights.

Application Strategies of Automatic Addressable Single-Lamp Control Technology in Tunnel Lighting

The article mainly studies the application strategy of automatic addressable single-lamp control technology in tunnel lighting.It encompasses an introduction to this technology,an analysis of the tunnel lighting system using automatic addressable single-lamp control technology,and outlines the main development direction for this technology in modern tunnel lighting.The aim is to offer insights that can inform the rational deployment of this technology,thereby enhancing the lighting control effectiveness in modern tunnels and meeting their specific lighting requirements more effectively.

Application of Intelligent Technology in Building Electrical Lighting Project

The rapid development of intelligent technology has led to its introduction into the field of electrical lighting in buildings.It provides more technical support for system design,use,and management,and creates a comfortable and safe living environment.The adoption of intelligent technology enables the creation of an intelligent management system,where controllers and sensors are used to adjust the light source within the building,monitor and manage the lighting system in real time,monitor the energy consumption and safety of the system,and achieve the goal of energy saving and emission reduction.This paper briefly discusses the application and significance of intelligent technology in electrical lighting and puts forward design ideas to optimize electrical lighting and measures for lighting system management.

The Application of Intelligent Lighting in Thermal Power Plants

With the rapid development of electronic information technology,the Internet of Things(IoT),Internet technology,and modern communication technology,people are demanding higher standards for the building environment.Especially in modern large-scale buildings with high levels of industrialization,lighting systems should also be optimized accordingly.This article explores the application path of intelligent lighting in thermal power plants for reference.

Application of Smart Streetlights in Urban Road Lighting

The construction and installation of street lighting is an important element in the modernization of China’s cities.Besides,it also plays an important role in raising the living standards of the people.In recent years,with the technological and economic development,smart street lighting has gradually emerged.Key functions of smart street lighting include road illumination,cultural promotion,meteorological monitoring,public broadcasting,and 5G micro-base stations.The overall quality of smart street lighting construction directly impacts the effectiveness of urban development and the city’s comprehensive growth.This paper analyzes the concept of smart street lighting,its advantages and disadvantages,the functionalities of smart street light systems,and the application of smart street lighting in urban road illumination.

Application of Landscape Smart Lighting in Construction Projects

Currently,to effectively construct high-quality smart cities and achieve comprehensive governance goals,various industries must embrace the transformation and upgrading of traditional management methods through the integration of new technologies.Among these,landscape smart lighting serves as a crucial tool for advancing smart city development.By judiciously applying this technology,it is possible to enhance traditional lighting methods and offer people novel experiences in their daily lives.Recognizing this importance,this article analyzes and organizes the content of landscape smart lighting,delves into its system characteristics,and summarizes its principles and practices in the field of architectural engineering as practical references for application scenarios.

Strategies for Applying LED Lights in Night Space Lighting for Bridges

LED lights have been widely used in urban night space lighting in recent years as they are small,energy-saving,and efficient.This article explores the use of LEDs in bridge night space lighting and their application strategies.The aim is to offer valuable insights and references for urban planners and bridge lighting designers in China.By advancing the application of LED technology in bridge night lighting,the goal is to enhance the city’s nighttime ambiance,making the bridge an iconic landmark and a defining feature of the city.

Simulation experiments on counter beam lighting in highway tunnel

Counter beam lighting was introduced as well as transverse symmetrical lighting and longitudinal symmetrical lighting.Simulation experiments were carried out by using DIAlux lighting software for the above three lighting methods.The results show that counter beam lighting is more reasonable to be adopted in the tunnel entrance zone because its threshold increment of disability glare is greater.Counter beam lighting can improve the background luminance of the obstacles and lighting efficiency compared with transverse symmetrical lighting and longitudinal symmetrical lighting.Therefore,tunnel lighting energy-saving can be achieved by reducing the road luminance demands and luminaries power.Longitudinal symmetrical lighting is conducive to the large luminaries spacing in the tunnel internal zone;so power consumption can be reduced by decreasing the number of luminaries used.Tunnel walls are unsuitable to pave with smooth or bright material.Installation height of the luminaries has less effect on counter beam lighting.

Parameters Optimization and Energy-Saving of Highway Tunnel Backlighting with LED

In order to acquire the most energy-saving luminairedistribution-parameters(LDPs)of highway tunnel interior zone backlighting,the parameters optimization model(POM)of backlighting for tunnel interior zone was established.Yanlieshan tunnel of Jiujing highway was taken as an example for the optimization.The optimal LDPs of the backlighting system of the tunnel interior zone were obtained by the POM,a comparison between the optimization results and those of Yanlieshan tunnel’s actual lighting system was performed,which showed that the optimized backlighting system with LED lamps installed according to the optimized LDPs could save energy remarkablely even under full capacity lighting condition.Illuminance and illuminance uniformity of the tunnel road surface still met the lighting demands even the LED lamp’s luminance decreased by 30%.A backlighting simulation experiment with the optimized backlighting LDPs for Yanlieshan tunnel was accomplished in the software Dialux.The simulation results basically agreed with the optimization calculated results from the POM which proved the correctness of the backlighting POM.

Simplified prediction model for lighting energy consumption in office building scheme design

At the scheme design stage,the potential of daylighting is significant due to the saving for electric lighting use. There are few simple tools for architects to optimize the daylighting design. Therefore,it is useful to develop a design guideline related to the evaluation of lighting energy saving potential and sunlight design strategies. This paper analyzes the impacts of different artificial lighting control methods and design parameters on daylighting. A direct correlation between lighting energy consumption and parameters such as orientations,window to wall ratio (WWR) and perimeter depth is established. A simplified prediction model is proposed to estimate lighting energy consumption with the given perimeter depth,WWR,and window transparency. Validation of the model is carried out compared with detailed lighting simulation software for an office building. After the variation analysis for these parameters,design advises for the daylighting design at scheme design phase are summarized.

Controller Design of Intelligent Lighting Network

Studied are the controller design and basic principles of intelligent lighting network. TI’s MSP430F123 is used as a main controller. By using the ZigBee modules(Xbee/Xbee-PRO) and the GSM module(SIM300C) for wireless communications, the lighting control is enabled to access wireless network. This system uses a mobile phone to achieve light on-off directly, which can accomplish wireless control of intelligent lighting in families.

Windows Influence on Room Daylighting in Residential Buildings

Daylighting studies in buildings are key parts of environmental analysis and can be easily conducted at the early stages of design as part of environmentally responsive building design as well as to inform the final architectural layout and interior design. The main aim of this study is to demonstrate how such daylighting studies can be completed at the early stages of design and, at the same time, to show the impact of window design and positioning on building indoor environments. The paper is focused on a study of window influence on room daylighting in residential buildings and computer lighting simulations in software packages： Windows Daylighting System and Autodesk Ecotect Analysis, have been carried out for different style and positioning of windows using several case studies. The main findings clearly indicated that not only the window size and style matters, but also the positioning of windows considering external walls which would make a significant influence on room daylighting levels and, therefore, such daylight studies are very important for the early stage of environmental analysis during building design.

Controlled LED Lighting for Horticulture: A Review

As energy gradually becomes a more valuable commodity, the desire for reduced energy losses strengthens. Lighting is a critical field on this matter, as it accounts for a large percentage of the global electricity consumption and modern lighting systems are greatly more efficient than incandescent, discharge, and fluorescent lights. Previous research has proven that plants do not require the entire visible spectrum but react only to specific wavelengths, making it possible to control their growth and yield via artificial lighting. The flexibility of control of Light Emitting Diode (LED) lights allows for the combination of great energy losses reduction and controlled plant growth, achieving the improvement of two major parameters in a single action. This review paper summarizes the current research on the effect different light wavelengths have on specific plant species and discusses the applications of LED lighting for horticulture, yield storage, and disease protection.

Automated Smart Utilization of Background Lights and Daylight for Green Building Efficient and Economic Indoor Lighting Intensity Control

The ways which are used today in order to light houses, offices, and most of the indoor areas are inefficient as a lot of energy is consumed unnecessarily during the day time. Mainly this problem because the interior lighting design consider the worst case when the light service is at night, which is not always valid. Also in most cases the lighting system design relies on people to control the lights switching on and off. This problem is also one of the design concerns in Green Building. In this paper, a solution to this problem and a method for people’s comfort who use the indoor facilities in industrial buildings is presented. In the proposed smart lighting system, lights switch on automatically when there is somebody in the room or in the occupied space and switch off when there is no occupancy. In addition to this known technique, adjustment of the brightness level of the lights will be possible via the personal computer or any other smart device. In this method, for the illumination level in the area, where is needed to be controlled for better energy saving, the light automatically is measured by the sensor and considering the amount of background lights coming from outside, automatically the brightness of lights is controlled to reach the preset level that determined for that room. By the means of this method, it is possible to provide better user comfort, avoid human forcedness to switch the light on and off, and hence effective energy saving. Arduino controller is used to build the controller and to demonstrate the results. Economic analysis was done to calculate the percentage of the energy saving that can be obtained by implementing the proposed smart lighting controller. As an outcome of the economic analysis, energy saving norm for an office with a standard size was calculated.

Research on the Application of Green Lighting Technology in Sports Lighting

With China’s continued development of society and economy, the importance of ecological environmental protection is growing. This protection has become an indispensable part of social development. The use of various green environmental protection equipment can effectively promote ecological environmental protection and reduce the adverse effects of human activities on the environment. In the field of sports lighting equipment in China, traditional lighting methods constitute an inherent danger to the environment, leading to a waste of valuable resources and environmental pollution. This study involves a multi-tile-multifunctional-function controller, which effectively solves the control problem of the control light. In the sports lighting group, the high and low-level lighting of the sports lighting group, and adjust the light from the height highly effectively to adjust each height. The low-shot mode reduces the power consumption of the system by about 33% to 60%, which significantly helps energy saving. By optimizing the performance of the lighting system, promoting the preservation of power resources, reducing the adverse effects of pollution caused by equipment utilization and energy waste, and promoting the harmonious cohabitation of human and natural environment. .

WEST BERKELEY PUBLIC LIBRARY:A CASE STUDY IN ZERO-NET ENERGY LIGHTING DESIGN

Designing lighting for zero-net energy buildings poses unique and fascinating design problems.Beyond the challenge of providing lighting loads on the order of.1W/sqft2,these projects require toolsets beyond the typical scope of a light-ing design consultant,including detailed controls design and photometric pre-dictions of available daylighting.These new roles are part of a broader trend in lighting design as,driven by new code requirements and a general push towards high-performing buildings,lighting design is becoming a more technical,metrics-driven profession.There’s a delicate balancing act here,and indeed we have the same responsibility to these projects as any other:lighting that is comfortable and functional for the occupants,that supports the architectural gesture,and that is available within the project budget.So the task is not simply to design the absolute minimum energy density(although yes,also that),but rather to identify ways in which all of these constraints may be harmonized,and embrace the collaborative and iterative workflow that these projects demand.This case study is written for architects,engineers,owners and others that want an overview of the lighting design process for ultra-low energy density buildings.I’ll gloss both the absolute basics and the more esoteric technical details in favor of discussing practical techniques that we used successfully to further the project goals,and the trade-offs we confronted.

Application of Smart Lighting in Urban Street Lighting

At present,the number of road engineering projects is increasing,and the corresponding street lighting work is receiving much more attention.In order to improve the lighting,operation,convenience,and energy-saving effect of urban streets,the concept of“smart lighting”needs to be implemented.This includes the planning of an urban street lighting design scheme and the use of appropriate software as well as components to realize significant optimization of the lighting work in urban streets.Therefore,this paper discusses the application measures of smart lighting in urban street lighting to provide reference.

Overhead supplemental far-red light stimulates tomato growth under intra-canopy lighting with LEDs

Far-red(FR) light regulates phytochrome-mediated morphological and physiological plant responses.This study aims to investigate how greenhouse tomato morphology and production response to different durations of FR light during daytime and at the end of day(EOD).High-wire tomato plants were grown under intra-canopy lighting consisting of red(peak wavelength at 640 nm) and blue(peak wavelength at 450 nm) light-emitting diodes(LEDs) with photosynthetic photon flux density(PPFD) of 144 μmol m–2 s–1 at 10 cm away from the lamps,and combined with overhead supplemental FR light(peak wavelength at 735 nm) with PPFD of 43 μmol m–2 s–1 at 20 cm below the lamps.Plants were exposed to three durations of FR supplemental lighting including: 06:00–18:00(FR12),18:00–19:30(EOD-FR1.5),18:00–18:30(EOD-FR0.5),and control that without supplemental FR light.The results showed that supplemental FR light significantly stimulated stem elongation thereby resulting in longer plants compared with the control.Moreover,FR light altered leaf morphology toward higher leaf length/width ratio and larger leaf area.The altered plant architecture in FR supplemented plants led to a more homogeneous light distribution inside the canopy.Total plant biomass was increased by 9–16% under supplemental FR light in comparison with control,which led to 7–12% increase in ripe fruit yield.Soluble sugar content of the ripe tomato fruit was slightly decreased by longer exposure of the plants to FR light.Dry matter partitioning to different plant organs were not substantially affected by the FR light treatments.No significant differences were observed among the three FR light treatments in plant morphology as well as yield and biomass production.We conclude that under intra-canopy lighting,overhead supplemental FR light stimulates tomato growth and production.And supplementary of EOD-FR0.5 is more favorable,as it consumes less electricity but induces similar effects on plant morphology and yield.

Low color temperature artificial lighting can slow myopia development: Long-term study using juvenile monkeys

The incidence of myopia has increased rapidly in recent decades, suggesting that environmental factors, such as light,may be an important cause. Correlated color temperature(CCT) is a commonly used index to quantify the spectral composition of light. Here, we used 32 juvenile monkeys(16 females and 16 males) and selected four kinds of light with typical but different CCTs to study the relationship between CCT and ocular axial elongation.