Design and fabrication of structural color by local surface plasmonic meta-molecules

In this paper, we propose a new form of nanostructures with Al film deposited on a patterned dielectric material for generating structural color, which is induced by local surface plasmonic resonant(LSPR) absorption in sub-wavelengthindented hole/ring arrays. Unlike other reported results obtained by using focus ion beam(FIB) to create metallic nanostructures, the nano-sized hole/ring arrays in Al film in this work are replicated by high resolution electron beam lithography(EBL) combined with self-aligned metallization. Clear structural color is observed and systematically studied by numerical simulations as well as optical characterizations. The central color is strongly related to the geometric size, which provides us with good opportunities to dye the colorless Al surface by controlling the hole/ring dimensions(both diameter and radius), and to open up broad applications in display, jewelry decoration, green production of packing papers, security code,and counterfeits prevention.

Optimization Design of an Embedded Multi-Cell Thin-Walled Energy Absorption Structures with Local Surface Nanocrystallization

Bymeans of the local surface nanocrystallization that enables to change the material on local positions,an innovative embedded multi-cell(EMC)thin-walled energy absorption structures with local surface nanocrystallization is proposed in this paper.The local surface nanacrystallization stripes are regarded as the moving morphable components in the domain for optimal design.Results reveal that after optimizing the local surface nanocrystallization layout,the specific energy absorption(SEA)is increased by 50.78%compared with the untreated counterpart.Besides,in contrast with the optimized 4-cell structure,the SEA of the nanocrystallized embedded 9-cell structure is further enhanced by 27.68%,in contrast with the 9-cell structure,the SEA of the nanocrystallized embedded clapboard type 9-cell structure is enhanced by 3.61%.Thismethod provides a guidance for the design of newenergy absorption devices.

Corrigendum to“Electromagnetically induced transparency via localized surface plasmon mode-assisted hybrid cavity QED”

We would like to point out the misprinted Fig.3 in our published paper[Chin.Phys.B 32,114205(2023)].Since only orders of subfigures need to be corrected and the main results of the published paper are correct,we present the correct figure in this corrigendum.

Electromagnetically induced transparency via localized surface plasmon mode-assisted hybrid cavity QED

In recent years, most studies have focused on the perfect absorption and high-efficiency quantum memory of the onesided system, ignoring the characteristics of its optical switching contrast. Thus, the performance of all-optical switching and optical transistors is limited. Herein, we propose a localized surface plasmon(LSP) mode-assisted cavity QED system which consists of a Λ-shaped three-level quantum emitter(QE), a metal nanoparticle and a one-sided optical cavity with a fully reflected mirror. In this system, the QE coherently couples to the cavity and LSP mode respectively, which is manipulated by the control field. As a result, considerably high and stable switch contrast of 90% can be achievable due to the strong confined field of the LSP mode and perfect absorption of the optical medium. In addition, we obtain a power dependent effect between the control field and the transmitted frequency as a result of the converted dark state. We employ the Heisenberg–Langevin equation and numerical master equation formalisms to explain high switching, controllable output light and the dark state. Our system introduces an effective method to improve the performance of optical switches based on the one-sided system in quantum information storage and quantum communication.

An Optimal Design of the Two-Staged Square Sectional Combined Energy Absorption Structure with Local Surface Nanocrystallization

In this paper,a local surface nanocrystallization technology is used for thin-walled structures with square cross sections,and an energy absorption device of two-staged combined energy absorption structure is proposed.In virtue of the surface nanocrystallization that enables to change the material on local positions,the structural deformation is induced and controlled to maximize the energy absorption capacity.A numerical model of the two-staged combined energy absorption structure is established,and the local surface nanocrystallization layout is optimized.The results show that the specific energy absorption of two-staged combined structure with local surface nanocrystallization can be increased by 34.36%compared with the untreated counterpart of the same material and structural shape.The ratio between the first and second peak crushing forces and the energy absorption allocation ratio between the two stages can be adjusted in the ranges of 0.26–0.55 and 0.31–0.45,respectively,which can be controlled by the local surface nanocrystallization designs.The numerical simulation and experimental results are in good agreement,which shows that the design for energy absorption device with local surface nanocrystallization is feasible and effective.

Ultrasensitive nanosensors based on localized surface plasmon resonances:From theory to applications

The subwavelength confinement feature of localized surface plasmon resonance（LSPR） allows plasmonic nanostructures to be functionalized as powerful platforms for detecting various molecular analytes as well as weak processes with nanoscale spatial resolution. One of the main goals of this field of research is to lower the absolute limit-of-detection（LOD）of LSPR-based sensors. This involves the improvement of（i） the figure-of-merit associated with structural parameters such as the size, shape and interparticle arrangement and,（ii） the spectral resolution. The latter involves advanced target identification and noise reduction techniques. By highlighting the strategies for improving the LOD, this review introduces the fundamental principles and recent progress of LSPR sensing based on different schemes including 1） refractometric sensing realized by observing target-induced refractive index changes, 2） plasmon rulers based on target-induced relative displacement of coupled plasmonic structures, 3） other relevant LSPR-based sensing schemes including chiral plasmonics,nanoparticle growth, and optomechanics. The ultimate LOD and the future trends of these LSPR-based sensing are also discussed.

Tunable localized surface plasmon resonances in MoO_(3-x)-TiO_(2) nanocomposites with enhanced catalytic activity for CO_(2) photoreduction under visible light

The photocatalytic reduction of CO2 with H2O to fuels and chemicals using solar energy is one of the most attractive but highly difficult routes.Thus far,only a very limited number of photocatalysts has been reported to be capable of catalyzing the photocatalytic reduction of CO2 under visible light.The utilization of the localized surface plasmon resonance(LSPR)phenomenon is an attractive strategy for developing visible-light photocatalysts.Herein,we have succeeded in synthesizing plasmonic MoO3?x-TiO2 nanocomposites with tunable LSPR by a simple solvothermal method.The well-structured nanocomposite containing two-dimensional(2D)molybdenum oxide(MoO3?x)nanosheets and one-dimensional(1D)titanium oxide nanotubes(TiO2-NT)showed LSPR absorption band in the visible-light region,and the incorporation of TiO2-NT significantly enhanced the LSPR absorption band.The MoO3?x-TiO2-NT nanocomposite is promising for application in the photocatalytic reduction of CO2 with H2O under visible light irradiation.

Photocurrent improvement of an ultra-thin silicon solar cell using the localized surface plasmonic effect of clustering nanoparticles

The cluster-shaped plasmonic nanostructures are used to manage the incident light inside an ultra-thin silicon solar cell.Here we simulate spherical,conical,pyramidal,and cylindrical nanoparticles in a form of a cluster at the rear side of a thin silicon cell,using the finite difference time domain(FDTD)method.By calculating the optical absorption and hence the photocurrent,it is shown that the clustering of nanoparticles significantly improves them.The photocurrent enhancement is the result of the plasmonic effects of clustering the nanoparticles.For comparison,first a cell with a single nanoparticle at the rear side is evaluated.Then four smaller nanoparticles are put around it to make a cluster.The photocurrents of 20.478 mA/cm2,23.186 mA/cm2,21.427 mA/cm2,and 21.243 mA/cm2 are obtained for the cells using clustering conical,spherical,pyramidal,cylindrical NPs at the backside,respectively.These values are 13.987 mA/cm2,16.901 mA/cm2,16.507 mA/cm2,17.926 mA/cm2 for the cell with one conical,spherical,pyramidal,cylindrical NPs at the backside,respectively.Therefore,clustering can significantly improve the photocurrents.Finally,the distribution of the electric field and the generation rate for the proposed structures are calculated.

Manipulated localized surface plasmon resonances in silver nanoshells coated with a spherical anisotropic layer

The influences of the anisotropy of the outer spherically anisotropic （SA） layer on the far-field spectra and near- field enhancements of the silver nanoshells are investigated by using a modified Mie scattering theory. It is found that with the increase of the anisotropic value of the SA layer, the dipole resonance wavelength of the silver nanoshell first increases and then decreases, while the local field factor （LFF） reduces. With the decrease of SA layer thickness, the dipole wavelength of the silver nanoshell shows a distinct blue-shift. When the SA layer becomes very thin, the modulations of the anisotropy of the SA layer on the plasmon resonance energy and the near-field enhancement are weakened. We further find that the smaller anisotropic value of the SA layer is helpful for obtaining the larger near-field enhancement in the Ag nanoshell. The geometric average of the dielectric components of the SA layer has a stronger effect on the plasmon resonance energy of the silver nanoshell than on the near-field enhancement.

A high figure of merit localized surface plasmon sensor based on a gold nanograting on the top of a gold planar film

We investigate the sensitivity and figure of merit （FOM） of a localized surface plasmon （LSP） sensor with gold nanograting on the top of planar metallic film. The sensitivity of the localized surface plasmon sensor is 317 nm/RIU, and the FOM is predicted to be above 8, which is very high for a localized surface plasmon sensor. By employing the rigorous coupled-wave analysis （RCWA） method, we analyze the distribution of the magnetic field and find that the sensing property of our proposed system is attributed to the interactions between the localized surface plasmon around the gold nanostrips and the surface plasmon polarition on the surface of the gold planar metallic film. These findings are important for developing high FOM localized surface plasmon sensors.

Polydopamine-Assisted Fabrication of Fiber-Optic Localized Surface Plasmon Resonance Sensor Based on Gold Nanoparticles

A fast and facile method of fabricating fiber-optic localized surface plasmon resonance sensors baseff on spherical gold nanoparticles was introduced in this study. The gold nanoparticles with an average diameter of 55 nm were synthesized via the Turkevich method and were then immobilized onto the surface of an uncladded sensor probe using a polydopamine layer. To obtain a sensor probe with high sensitivity to changes in the refractive index, a set of key optimization parameters, including the sensing length, coating time of the potydopamine layer, and coating time of the gold nanoparticles, were investigated. The sensitivity of the optimized sensor probe was 522.80 nm per refractive index unit, and the probe showed distinctive wavelength shifts when the refractive index was changed from 1.328 6 to 1.398 7. When stored in deionized water at 4 ℃, the sensor probe proved to be stable over a period of two weeks. The sensor also exhibited advantages, such as low cost, fast fabrication, and simple optical setup, which indicated its potential application in remote sensing and real-time detection.

Investigation on Surface Plasmon Polaritons and Localized Surface Plasmon Production Mechanism in Micro-Nano Structures

The simulation mechanism of surface plasmon polaritons(SPPs)and localized surface plasmon(LSP)in different structures was studied,including the Au reflection grating(Au grating),Au substrate with dielectric ribbons grating(Au substrate grating),and pure electric conductor(PEC)substrate with Au ribbons grating(Au ribbons grating).And the characteristics of the Smith-Purcell radiation in these structures were presented.Simulation results show that SPPs are excited on the bottom surface of Au substrate grating grooves and LSP is stimulated on the upper surface both of Au ribbons grating grooves and Au grating grooves.Owing to the irreconcilable contradiction between optimizing the grating diffraction radiation efficiency and optimizing the SPPs excitation efficiency in the Au substrate grating,only 40-times enhancement of the radiation intensity was obtained by excited SPPs.However,the LSP enhanced structure overcomes the above problem and gains much better radiation enhancement ability,with about 200-times enhancement obtained in the Au ribbons grating and more than 500-times enhancement obtained in the Au grating.The results presented here provide a way of developing miniature,integratable,tunable,high-power-density radiation sources from visible light to ultraviolet rays at room temperature.

Enhanced Photovoltaic Properties for Rear Passivated Crystalline Silicon Solar Cells by Fabricating Boron Doped Local Back Surface Field

In order to enhance the p-type doping concentration in the LBSF, boron was added into the aluminum paste and boron doped local back surface field（B-LBSF） was successfully fabricated in this work. Through boron doping in the LBSF, much higher doping concentration was observed for the B-LBSF over the Al-LBSF. Higher doping concentration in the LBSF is expected to lead to better rear passivation and lower rear contact resistance. Based on one thousand pieces of solar cells for each type, it was found that the rear passivated crystalline silicon solar cells with B-LBSF showed statistical improvement in their photovoltaic properties over those with Al-LBSF.

Tunable and stable localized surface plasmon resonance in SrMoO_(4) for enhanced visible light driven nitrogen reduction

Photocatalytic nitrogen reduction for the green synthesis of ammonia at ambient conditions has been slowed by the narrow light harvesting range,low activity and high charge recombination of photocatalysts.Plasmonic semiconducting nanomaterials are becoming the promising candidates for nitrogen photofixation because of the broad absorption spectrum,rich defects and hot carriers.In the present study,plasmonic SrMoO_(4) is developed by regulating the concentration of oxygen vacancies that are accompanied in the reduction process from Mo^(6+) to Mo^(5+).The stable and tunable localized surface plasmon resonance(LSPR)absorption in visible and near infrared light range makes the wide bandgap SrMoO_(4) utilize the solar energy more efficiently.Energetic electrons from both the intrinsic band excitation and the LSPR excitation enable the reduction of dinitrogen molecules thermodynamically in ultrapure water to ammonia.This work provides a unique clue to design efficient photocatalysts for nitrogen fixation.

Effects of thickness & shape on localized surface plasmon resonance of sexfoil nanoparticles

Localized surface plasmon （LSPR） resonance and sensing properties of a novel nanostructure （sexfoil nanoparticle） are studied using the finite-difference time-domain method. For the sandwich sexfoil nanoparticle, the calculated extinction spectrum shows that with the thickness of the dielectric layer increasing, long-wavelength peaks blueshift, while short- wavelength peaks redshift. Strong near-field coupling of the upper and lower metal layers leads to electric and magnetic field resonances; as the thickness increases, the electric field resonance gradually increases, while the magnetic field resonance decreases. The obtained refractive index sensitivity and figure of merit are 332 nm/RIU and 3.91 RIU^-1, respectively. In order to obtain better sensing ability, we further research the LSPR character of monolayer Ag sexfoil nanoparticle. After a series of trials to optimize the thickness and shape, the refractive index sensitivity approximates 668 nm/RIU, and the greatest figure of merit value comes to 14.8 RIU^-1.

Role of localised surface plasmon polaritons coupling in optical transmission through double-layer metal apertures

In this paper, we investigate the optical properties of the double-layer metal films perforated with single apertures by analysing the coupling of localized surface plasmon polaritons （LSPPs）. It is found that the amplitude and the wavelength of transmission peak in such a structure can be adjusted by changing the longitudinal interval D between two films and the lateral displacements dx and dy which are parallel and perpendicular to the polarization direction of incident light, respectively. The variation of longitudinal interval D results in the redshift of transmission peak due to the change of coupling strength of LSPPs near the single apertures. The amplitude of transmission peak decreases with the increase of dy and is less than that in the case of dx, which originates from the difference in coupling manner between LSPPs and the localized natures of LSPPs.

New Approach for Measured Surface Localization Based on Umbilical Points

Measured surface localization （MSL） is one of the key essentials for the assessment of form error in pre- cision manufacturing. Currently, the researches on MSL have focused on the corresponding relation search between two surfaces, the performance improvement of localization algorithms and the uncertainty analysis of localization. However, low efficiency, limitation of localization algo- rithms and mismatch of multiple similarities of feature points with no prior are the common disadvantages for MSL. In order to match feature points quickly and fulfill MSL efficiently, this paper presents a new localization approach for measured surfaces by extracting the generic umbilics and estimating their single complex variables, describing the match methods of ambiguous relation at umbilics, presenting the initial localization process of one pair matched points, refining MSL on the basis of obtained closet points for some measured points by the improvement directed projection method. In addition, the proposed algorithm is simulated in two different types of surfaces,two different localization types and multiple similar sur- faces, also tested with the part of B-spline surface machined and bottle mould with no knowledge, finally the initial and accurate rigid body transformation matrix, localization errors between two surfaces and execution time are got. The experimental results show that the pro- posed method is feasible, more accurate in localization and high in efficiency. The proposed research can not only improve the accuracy and performance of form error assessment, but also provide an effective guideline for the integration of different types of measured surfaces.

Affine Locally Symmetric Surfaces in R^4

The nondegenerate affine locally symmetric surfaces in R^4 with the transversal bundle defined by Nomizu and Vrancken have been studied and a complete classification of the locally symmetric surfaces with flat normal bundle has been given.

Toward transparent projection display:recent progress in frequency‐selective scattering of RGB light based on metallic nanoparticle’s localized surface plasmon resonance

A transparent display simultaneously enables visualization of the images displayed on it as well as the view behind it,and therefore can be applied to,for instance,augmented reality(AR),virtual reality(VR),and head up display(HUD).Many solutions have been proposed for this purpose.Recently,the idea of frequency-selective scattering of red,green and blue light while transmitting visible light of other colours to achieve transparent projection display has been proposed,by taking advantage of metallic nanoparticle’s localized surface plasmon resonance(LSPR).In this article,a review of the recent progress of frequency-selective scattering of red,green and blue light that are based on metallic nanoparticle’s LSPR is presented.A discussion of method for choosing appropriate metal(s)is first given,followed by the definition of a figure of merit used to quantify the performance of a designed nanoparticle structure.Selective scattering of various nanostructures,including sphere-shaped nanoparticles,ellipsoidal nanoparticles,super-sphere core-shell nanoparticles,metallic nanocubes,and metallic nanoparticles combined with gain materials,are discussed in detail.Each nanostructure has its own advantages and disadvantages,but the combination of the metallic nanoparticle with gain materials is a more promising way since it has the potential to generate ultra-sharp scattering peaks(i.e.,high frequency-selectivity).

Protein Based Localized Surface Plasmon Resonance Gas Sensing

We apply the localized surface plasrnon resonance （LSPR） of gold nanoparticles （GNPs） covalently coupled with cytochrorne c （cyt c） to create a nanobiosensor for detecting hydrogen sulfide （H2S） in the range of 15 lOOppb. Monolayer formation of GNPs on glass surface functionalized with 3-aminopropyltrirnethoxysilane （APTMS） is performed for fabricating a chip-based format of the optical transducer. By chemical introduction of short-chain thiol derivatives on cyt c protein shell via its lysine residues, a very fast self-assembled rnonolayer （SAM） of cyt c is formed on the GNPs. Significant shifts in the LSPR peak （△λLSPR） are observed by reacting H2S with cyt c. Results show a linear relationship between △λLSPR and H2S concentration. Furthermore, shifts in the LSPR peak are reversible and the peak positions return to their pre-exposure values once the H2S is removed. The experirnental results strongly indicate that the protein based LSPR chip can be successfully used as a simple, fast, sensitive and quantitative sensor for H2S detection.