In terms of asymmetrical three-dimensional distribution(ID) of luminous intensity(LI) of light-emitting-diode(LED),a testing system was conducted in this study. Design and principle of the testing system were introduc...In terms of asymmetrical three-dimensional distribution(ID) of luminous intensity(LI) of light-emitting-diode(LED),a testing system was conducted in this study. Design and principle of the testing system were introduced. 31 photometers were placed on a concentric circle,and all of them were used to gather LI data of LED at the same time. The data acquisition card(DAC) was used to gather multichannel data and controlled motor. Experimental results indicated that the testing system had achieved the goal of testing three-dimensional distribution of LI. And each parameter could meet the requirements of industrial production and measurement.展开更多
We propose a new method of using conductive glue to agglutinate GaAs based A1CaInP light emitting diodes （LEDs） onto silicon substrate, and the absorbing GaAs layer is subsequently removed by grinding and selective ...We propose a new method of using conductive glue to agglutinate GaAs based A1CaInP light emitting diodes （LEDs） onto silicon substrate, and the absorbing GaAs layer is subsequently removed by grinding and selective wet etching. It was found that A1GaInP-Si glue agglutinated LEDs have larger saturation current and luminous intensity than the conventional LEDs working at the same injected current. The luminous intensity of the new device is as much as 1007.4 mcd at a saturation current of 125 mA without being encapsulated, while the conventional LEDs only have 266.2 mcd at a saturation current of 105 mA. The luminescence intensity is also found to increase by about 3.2% after working at 50 mA for 768 h. This means that the new structured LEDs have good reliability performance.展开更多
Dynamic detection based on optics sensors and ranging radars is a new method to detect the luminous intensity of flight aid lights. The optics sensors can get the illumination information of each light, the ranging ra...Dynamic detection based on optics sensors and ranging radars is a new method to detect the luminous intensity of flight aid lights. The optics sensors can get the illumination information of each light, the ranging radar gets the distance information, and then data amalgamation technology is used to compute the luminous intensity of each light. A method to modify the errors of this dynamic detection system is presented. It avoids the accumulation error and measurement carrier’s excursion error by using peak value detection based on optics sensors to estimate the accurate position of each light, then to modify the lights’ lengthways distance information and transverse position information. The performance of the detection and ranging system is validated by some experiments and shown in pictures.展开更多
文摘In terms of asymmetrical three-dimensional distribution(ID) of luminous intensity(LI) of light-emitting-diode(LED),a testing system was conducted in this study. Design and principle of the testing system were introduced. 31 photometers were placed on a concentric circle,and all of them were used to gather LI data of LED at the same time. The data acquisition card(DAC) was used to gather multichannel data and controlled motor. Experimental results indicated that the testing system had achieved the goal of testing three-dimensional distribution of LI. And each parameter could meet the requirements of industrial production and measurement.
基金Project supported by the National High Technology Research and Development Program of China (Grant No. 2006AA03A121)the National Basic Research Program of China (Grant No. 2006CB604900)
文摘We propose a new method of using conductive glue to agglutinate GaAs based A1CaInP light emitting diodes （LEDs） onto silicon substrate, and the absorbing GaAs layer is subsequently removed by grinding and selective wet etching. It was found that A1GaInP-Si glue agglutinated LEDs have larger saturation current and luminous intensity than the conventional LEDs working at the same injected current. The luminous intensity of the new device is as much as 1007.4 mcd at a saturation current of 125 mA without being encapsulated, while the conventional LEDs only have 266.2 mcd at a saturation current of 105 mA. The luminescence intensity is also found to increase by about 3.2% after working at 50 mA for 768 h. This means that the new structured LEDs have good reliability performance.
基金Science and Technology Development Project Item of Tianjin(06YFGZGX00800)Science and Technology Item of CAAC(MY0517416)
文摘Dynamic detection based on optics sensors and ranging radars is a new method to detect the luminous intensity of flight aid lights. The optics sensors can get the illumination information of each light, the ranging radar gets the distance information, and then data amalgamation technology is used to compute the luminous intensity of each light. A method to modify the errors of this dynamic detection system is presented. It avoids the accumulation error and measurement carrier’s excursion error by using peak value detection based on optics sensors to estimate the accurate position of each light, then to modify the lights’ lengthways distance information and transverse position information. The performance of the detection and ranging system is validated by some experiments and shown in pictures.
