Numerical analysis of geosynthetic-reinforced embankment performance under moving loads

The performance of geosynthetic-reinforced embankments under traffic moving loads is always a hotspot in the geotechnical engineering field.A three-dimensional(3D)model of a geosynthetic-reinforced embankment without drainage consolidation was established using the finite element software ABAQUS.In this model,the traffic loads were simulated by two moving loads of rectangular pattern,and their amplitude,range,and moving speed were realized by a Fortran subroutine.The embankment fill was simulated by an equivalent linear viscoelastic model,which can reflect its viscoelasticity.The geogrid was simulated by the truss element,and the geocell was simulated by the membrane element.Infinite elements were utilized to weaken the boundary effect caused by the model geometry at the boundaries.Validation of the established numerical model was conducted by comparing the predicted deformations in the cross-section of the geosynthetic-reinforced embankment with those from the existing literature.On this basis,the dynamic stress and strain distribution in the pavement structure layer of the geosynthetic-reinforced embankment under a moving load was also analyzed.Finally,a parametric study was conducted to examine the influences of the different types of reinforcement,overload,and the moving load velocity on the geosynthetic-reinforced embankment.

Evaluation of vertical impact factor coefficients for continuous and integral railway bridges under high-speed moving loads

In the railway bridge analysis and design method,dynamic train loads are regarded as static loads enhanced by an impact factor(IF).The IF coefficients for various railway bridges have been reported as a function of span length or frequency of the bridges in Eurocode(2003).However,these IF coefficient values neglect the effects of very high speeds(>200 km/h)and soil-structure interaction(SSI).In this work,a comprehensive study to assess the impact factor coefficients of mid-span vertical displacements for continuous and integral railway bridges subjected to high-speed moving loads is reported.Three different configurations,each for the three-dimensional(3D)continuous and integral bridge,are considered.Also,single-track(1-T)and two-track(2-T)“real train”loading cases for both these bridge types are considered.Subsequently,finite element analysis of the full-scale 3D bridge models,to identify their IF values,considering the effects of SSI for three different soil conditions,is conducted.The IF values obtained from the study for both bridge types are comparable and are greater than the values recommended by Eurocode(2003).The results reveal that with a loss of soil stiffness,the IF value reduces;thus,it confirms the importance of SSI analysis.

Codimension-two bifurcation of axial loaded beam bridge subjected to an infinite series of moving loads

A novel model is proposed which comprises of a beam bridge subjected to an axial load and an infinite series of moving loads. The moving loads, whose distance between the neighbouring ones is the length of the beam bridge, coupled with the axial force can lead the vibration of the beam bridge to codimension-two bifurcation. Of particular concern is a parameter regime where non-persistence set regions undergo a transition to persistence regions. The boundary of each stripe represents a bifurcation which can drive the system off a kind of dynamics and jump to another one, causing damage due to the resulting amplitude jumps. The Galerkin method, averaging method, invertible linear transformation, and near identity nonlinear transformations are used to obtain the universal unfolding for the codimension-two bifurcation of the mid-span deflection. The efficiency of the theoretical analysis obtained in this paper is verified via numerical simulations.

THE THREE-DIMENSIONAL STRESS INTENSITY FACTOR UNDER MOVING LOADS ON THE CRACK FACES

The dynamic stress intensity factor history for a half plane crack in an otherwise unbounded elastic body,with the crack faces subjected to a traction distribution consisting of two pairs of combined mode point loads that move in a direction perpendicular to the crack edge is considered.The analytic expression for the combined mode stress intensity factors as a function of time for any point along the crack edge is obtained.The method of solution is based on the application of integral transform together with the Wiener-Hopf technique and the Cagniard-de Hoop method. Some features of the solution are discussed and graphical results for various point load speeds are presented.

Numerical analysis of moving train induced vibrations on tunnel,surrounding ground and structure

This study is focused on the effect of vibration induced by moving trains in tunnels on the surrounding ground and structures.A three-dimensional finite element model is established for a one-track railway tunnel and an adjacent twelve-storey building frame by using commercial software Midas GTS-NX(2019)and Midas Gen.This study considered the moving load effect of a complete train,which varies with space as well as with time.The effect of factors such as train speed,overburden pressure on the tunnel and variation in soil properties are studied in the time domain.As a result,the variations in horizontal and vertical acceleration for two different sites,i.e.,the free ground surface(without structure)and the area containing the structure,are compared.Also,the displacement pattern of the raft foundation is plotted for different train velocities.At lower speeds,the heaving phenomenon is negligible,but as the speed increases,both the heaving and differential settlement increase in the foundation.This study demonstrates that the effect of moving train vibrations should be considered in the design of new nearby structures and proper ground improvement should be considered for existing structures.

Random vibration analysis of FGM plates subjected to moving load using a refined stochastic finite element method

The article introduces a finite element procedure using the bilinear quadrilateral element or four-node rectangular element(namely Q4 element) based on a refined first-order shear deformation theory(rFSDT) and Monte Carlo simulation(MCS), so-called refined stochastic finite element method to investigate the random vibration of functionally graded material(FGM) plates subjected to the moving load.The advantage of the proposed method is to use r-FSDT to improve the accuracy of classical FSDT, satisfy the stress-free condition at the plate boundaries, and combine with MCS to analyze the vibration of the FGM plate when the parameter inputs are random quantities following a normal distribution. The obtained results show that the distribution characteristics of the vibration response of the FGM plate depend on the standard deviation of the input parameters and the velocity of the moving load.Furthermore, the numerical results in this study are expected to contribute to improving the understanding of FGM plates subjected to moving loads with uncertain input parameters.

Dynamic response of concrete pavement structure with asphalt isolating layer under moving loads

A three-dimensional finite element model （3D FEM） is built using ABAQUS to analyze the dynamic response of a concrete pavement structure with an asphalt isolating layer under moving loads. The 3D model is prepared and validated in the state of no asphalt isolating layer. Stress and deflection at the critical load position are calculated by changing thickness, modulus of isolating layer and the combination between the isolating layer and concrete slab. Analysis result shows that the stress and deflection of the concrete slab increase with the increase of thickness. The stress and deflection of the concrete slab decrease with the increase of combination between the isolating layer and concrete slab. The influence of changing the isolating layer modulus to the stress and deflection of the concrete slab is not significant. From the results, asphalt isolating layer design is suggested in concrete pavement.

Analytical study on the dynamic displacement response of a curved track subjected to moving loads

A closed-form out-of-plane dynamic displacement response of a curved track subjected to moving loads was proposed.The track structure was modeled as a planar curved Timoshenko beam periodically supported by the double-layer spring-damping elements.The general dynamic displacement response induced by the moving loads along the curve on the elastic semi-infinite space was firstly obtained in the frequency domain,according to the Duhamel integral and the dynamic reciprocity theorem.In the case of the periodic curved track structure subjected to moving loads,the dynamic displacement equation was simplified into a form of summation within the basic track cell instead of the integral.The transfer function for the curved track was expressed in the form of a transfer matrix.Single and series moving loads were involved in the calculation program.For the verification of the analytical model,the mid-span vertical deflection of a simply support curved beam subjected to moving load was recalculated and compared with the same case in the reference.The research results indicate that:under the same moving loads,the displacement response of the curved track decreases slightly with the increasing track radius,and the displacement response of the curved track with the radius greater than or equal to 600 m is almost equivalent to the displacement response of the straight track;the frequency spectrum of the curved track is more abundant than that of the straight track,which may result in more wheel-rail resonance and rail corrugation in the curved lines.

Application of semi-analytical finite element method to analyze the bearing capacity of asphalt pavements under moving loads

To facilitate long term infrastructure asset management systems, it is necessary to determine the bearing capacity of pavements. Currently it is common to conduct such measurements in a stationary manner, however the evaluation with stationary loading does not correspond to reality a tendency towards continuous and high speed measurements in recent years can be observed. The computational program SAFEM was developed with the objective of evaluating the dynamic response of asphalt under moving loads and is based on a semi-analytic element method. In this research project SAFEM is compared to commercial finite element software ABAQUS and field measurements to verify the computational accuracy. The computational accuracy of SAFEM was found to be high enough to be viable whilst boasting a computational time far shorter than ABAQUS. Thus, SAFEM appears to be a feasible approach to determine the dynamic response of pavements under dynamic loads and is a useful tool for infrastructure administrations to analyze the pavement bearing capacity.

Equivalent Stiffness of the Saturated Poro-elastic Half Space Interacting with an Infinite Beam to Harmonic Moving Loads

The expression of the equivalent stiffness of the saturated poro-elastic half space interacting with an infinite beam to harmonic moving loads is obtained via the Fourier transformation method in the frequency wave number domain. Based on the obtained equivalent stiffness, the frequency wave number domain solution of the beam-half-space system is obtained by the compatibility condition between the beam and the half space. Critical velocity of harmonic moving loads along an infinite Euler-Bernoulli elastic beam is determined. The time domain solutions for the beam and the saturated poro-elastic half space are derived by means of the inverse Fourier transformation method. Also, the influences of the load speed, frequency and material parameters of the poro-elastic half space on the responses of the beam are investigated. Numerical results show that the frequency corresponding to the maximum deflection and bending moment increases with increasing load speed. Moreover, it can be seen that at higher frequencies, the dynamic response is independent of the load speed. The present results also show that for a beam overlying a saturated poro-elastic half space, there still exist critical velocities even when the load velocity is larger than the shear wave speed of the medium.

ANALYTICAL MODELS OF FLOATING BRIDGES SUBJECTED BY MOVING LOADS FOR DIFFERENT WATER DEPTHS

There are two types of floating bridge such as discrete-pontoon floating bridges and continuous-pontoon floating bridges. Analytical models of both floating bridges subjected by raoving loads are presented to study the dynamic responses with hydrodynamic influence coefficients for different water depths. The beam theory and potential theory are introduced to produce the models. The hydrodynamic coefficients and dynamic responses of bridges are evaluated by the boundary element method and by the Galerkin method of weighted residuals, respectively. Considering causal relationship between the frequencies of the oscillation of floating bridges and the added mass coefficients, an iteration method is introduced to compute hydrodynamic frequencies. The results indicate that water depth has little influence upon the dynamic responses of both types of floating bridges, so that the effect of water depth can be neglected during the course of designing floating bridges.

Vibration characteristics of frozen soil under moving track loads

Vibration due to moving traffic loads is an important factor which induces frozen soil damage; this paper analyzed these vibration characteristics of frozen soil foundation under track loads. Firstly, seismic observation array （SOA） technology was applied to monitor the three dimensional dynamic characteristics of frozen soil under movable track load in a per- mafrost region and seasonal frozen soil area. Secondly, a numerical simulation for the response of frozen soil under movable track load was performed based on finite element analysis （FEA）, The results show that dynamic characteristics of frozen soil in perpendicular and parallel direction of the track are obviously different. In the direction perpendicular to the track, the vertical acceleration amplitude had an abrupt increase in the 9-10 m from the track line. In the direction parallel to the track, the acceleration in vertical and horizontal direction had a quick attenuation compared to the other direction. Lastly, various parameters were analyzed for the purpose of controlling the dynamic response of frozen soil and the vibration attenuation in frozen soil layer.

A dynamic problem on the edges of a mode Ι crack subjected to moving unit-step loads

By the theory of complex functions, a dynamic problem on the edges of a mode I crack subjected to moving unit-step loads are investigated. The Riemann-Hilbert problem is easily formulated by the ways of self-similar functions. The analytical solution obtained is rather simple and concise. After the solution was utilized by superposition theorem, the relevant solution on the case of arbitrary loading can be obtained.

Numerical Simulation-Based Analysis of the Impact of Overloading on Segmentally Assembled Bridges

Segmentally assembled bridges are increasinglyfinding engineering applications in recent years due to their unique advantages,especially as urban viaducts.Vehicle loads are one of the most important variable loads acting on bridge structures.Accordingly,the influence of overloaded vehicles on existing assembled bridge structures is an urgent concern at present.This paper establishes thefinite element model of the segmentally assembled bridge based on ABAQUS software and analyzes the influence of vehicle overload on an assembled girder bridge struc-ture.First,afinite element model corresponding to the target bridge is established based on ABAQUS software,and the load is controlled to simulate vehicle movement in each area of the traveling zone at different times.Sec-ond,the key cross-sections of segmental girder bridges are monitored in real time based on the force character-istics of continuous girder bridges,and they are compared with the simulation results.Finally,a material damage ontology model is introduced,and the structural damage caused by different overloading rates is compared and analyzed.Results show that thefinite element modeling method is accurate by comparing with on-site measured data,and it is suitable for the numerical simulation of segmental girder bridges;Dynamic sensors installed at 1/4L,1/2L,and 3/4L of the segmental girder main beams could be used to identify the dynamic response of segmental girder bridges;The bottom plate of the segmental girder bridge is mostly damaged at the position where the length of the precast beam section changes and the midspan position.With the increase in load,damage in the direction of the bridge develops faster than that in the direction of the transverse bridge.Thefindings of this study can guide maintenance departments in the management and maintenance of bridges and vehicles.

Dynamic response of multi-scale structure in flexible pavement to moving load

In order to study the dynamic responses in the microstructures of the pavement structure, the multi-scale modeling subjected to moving load is analyzed using the discrete element method （DEM）. The macro-scale discrete element model of the flexible pavement structure is established. The stress and strain at the bottom of the asphalt concrete layer under moving load are calculated. The DEM model is validated through comparison between DEM predictions and the results from the classical program. Based on the validated macro-scale DEM model, the distribution and the volumetric fraction of coarse aggregate, mastics and air voids at the bottom of the asphalt layer are modeled, and then the multi-scale model is constructed. The dynamic response in the microstructures of the multi-scale model are calculated and compared with the results from the macro model. The influence of mastic stiffness on the distribution of dynamic response in the microstructures is also analyzed. Results show that the average values and the variation coefficient of the tensile stress at the aggregate-mastic interface are far more than those within the mastics. The dynamic response including stress and strain distributes non-uniformly in both mastics and the interface. An increase in mastic stiffness tends to a uniform distribution of tensile stress in asphalt concrete.

Dynamic Analysis of A Pontoon-Separated Floating Bridge Subjected to A Moving Load

For the design and operation of a floating bridge, the understanding of its dynamic behavior under a moving load is of great importance. The purpose of this paper is to investigate the dynamic performances of a new type floating bridge, the pontoon-separated floating bridge, under the effect of a moving load. In the paper, a brief summary of the dynamic analysis of the floating bridge is first introduced. The motion equations for a pontoon-separated floating bridge, considering the nonlinear properties of connectors and vehicles＇ inertia effects, are proposed. The super-element method is applied to reduce the numerical analysis scale to solve the reduced equations. Based on the static analysis, the dynamic features of the new type floating bridge subjected to a moving load are investigated. It is found that the dynamie behavior of the pontoon-separated floating bridge is superior to that of the ribbon bridge by taking the nonlinearity of eonneetors into account.

High-precision solution to the moving load problem using an improved spectral element method

In this paper, the spectral element method(SEM)is improved to solve the moving load problem. In this method, a structure with uniform geometry and material properties is considered as a spectral element, which means that the element number and the degree of freedom can be reduced significantly. Based on the variational method and the Laplace transform theory, the spectral stiffness matrix and the equivalent nodal force of the beam-column element are established. The static Green function is employed to deduce the improved function. The proposed method is applied to two typical engineering practices—the one-span bridge and the horizontal jib of the tower crane. The results have revealed the following. First, the new method can yield extremely high-precision results of the dynamic deflection, the bending moment and the shear force in the moving load problem.In most cases, the relative errors are smaller than 1%. Second, by comparing with the finite element method, one can obtain the highly accurate results using the improved SEM with smaller element numbers. Moreover, the method can be widely used for statically determinate as well as statically indeterminate structures. Third, the dynamic deflection of the twin-lift jib decreases with the increase in the moving load speed, whereas the curvature of the deflection increases.Finally, the dynamic deflection, the bending moment and the shear force of the jib will all increase as the magnitude of the moving load increases.

Dynamic response analysis of a multiple-beam structure subjected to a moving load

In this study,the dynamic response of an elastically connected multi-beam structure subjected to a moving load with elastic boundary conditions is investigated.The boundary conditions and properties of each beam vary,and the difficulty of solving the motion equation is reduced by using a Fourier series plus three special transformations.By examining a high-speed railway(HSR)with mixed boundary conditions,the rationality for the newly proposed method is verified,the difference in simulated multiple-beam models with different beam numbers is explored,and the influence of material parameters and load speed on the dynamic response of multiple-beam structures is examined.Results suggest that the number of beams in the model should be as close to the actual beam number as possible.Models with an appropriate beam number can be used to describe in detail the dynamic response of the structure.Neglecting the track-structure can overestimate the resonant speed of a high-speed railway,simply-supported beam bridge.The effective interval of foundation stiffness(EIFS)can provide a reference for future engineering designs.

Dynamic response of a beam on a Pasternak foundation and under a moving load

The dynamic response of an infinite beam placed on a Pasternak foundation when the system was subjected to a moving load was investigated.We used the double Fourier transform and its inversion to solve the formulations of the problem.A closed form analytic solution of the beam was obtained by the theorem of residues.We selected a numerical example to illustrate the dynamic response of the beam on Pasternak and Winkler foundations,respectively.We discuss the effect of the moving load velocity on the dynamic displacement response of the beam.The maximum deflection of the beam increases slightly with increased load velocity but increases significantly with reduced shear modulus of subgrade at a given velocity.The maximum deflection of a beam resting on a Pasternak foundation is much smaller than that of a beam on a Winkler foundation.

Two-dimensional interactions due to moving load in generalized thermoelastic solid with diffusion

The present paper is concerned with the investigation of disturbances in＇a homogeneous, isotropic elastic medium with generalized thermoelastic diffusion, when a moving source is acting along one of the co-ordinate axis on the boundary of the medium. Eigen value approach is applied to study the disturbance in Laplace-Fourier transform domain for a two dimensional problem. The analytical expressions for displacement components, stresses, temperature field, concentration and chemical potential are obtained in the physical domain by using a numerical technique for the inversion of Laplace transform based on Fourier expansion techniques. These expressions are calculated numerically for a copper like material and depicted graphically. As special cases, the results in generalized thermoelastic and elastic media are obtained. Effect of presence of diffusion is analyzed theoretically and numerically.