A historical overview of nano-optics:From near-field optics to plasmonics

Nano-optics is an emergent research field in physics that appeared in the 1980s,which deals with light–matter optical interactions at the nanometer scale.In early studies of nano-optics,the main concern focus is to obtain higher optical resolution over the diffraction limit.The researches of near-field imaging and spectroscopy based on scanning near-field optical microscopy(SNOM)are developed.The exploration of improving SNOM probe for near-field detection leads to the emergence of surface plasmons.In the sense of resolution and wider application,there has been a significant transition from seeking higher resolution microscopy to plasmonic near-field modulations in the nano-optics community during the nano-optic development.Nowadays,studies of nano-optics prefer the investigation of plasmonics in different material systems.In this article,the history of the development of near-field optics is briefly reviewed.The difficulties of conventional SNOM to achieve higher resolution are discussed.As an alternative solution,surface plasmons have shown the advantages of higher resolution,wider application,and flexible nano-optical modulation for new devices.The typical studies in different periods are introduced and characteristics of nano-optics in each stage are analyzed.In this way,the evolution progress from near-field optics to plasmonics of nano-optics research is presented.The future development of nano-optics is discussed then.

Solar adaptive optics systems for the New Vacuum Solar Telescope at the Fuxian Lake Solar Observatory

Adaptive optics(AO)is essential for high-quality ground-based observations with large telescopes because it counters the impact of wavefront aberrations caused by atmospheric turbulence.The new vacuum solar telescope(NVST)is one of the most important high-resolution solar observation instruments in the world.Three sets of solar adaptive optics systems have been developed and installed on this telescope:conventional adaptive optics,ground layer adaptive optics,and multi-conjugate adaptive optics.These have been in operation from 2018 to 2023.This paper details the development and application of solar adaptive optics on the NVST and discusses the newest instrumentation.

Towards the performance limit of catenary meta-optics via field-driven optimization

Catenary optics enables metasurfaces with higher efficiency and wider bandwidth,and is highly anticipated in the imaging system,super-resolution lithography,and broadband absorbers.However,the periodic boundary approximation without considering aperiodic electromagnetic crosstalk poses challenges for catenary optical devices to reach their performance limits.Here,perfect control of both local geometric and propagation phases is realized through field-driven optimization,in which the field distribution is calculated under real boundary conditions.Different from other optimization methods requiring a mass of iterations,the proposed design method requires less than ten iterations to get the efficiency close to the optimal value.Based on the library of shape-optimized catenary structures,centimeter-scale devices can be designed in ten seconds,with the performance improved by ~15%.Furthermore,this method has the ability to extend catenary-like continuous structures to arbitrary polarization,including both linear and elliptical polarizations,which is difficult to achieve with traditional design methods.It provides a way for the development of catenary optics and serves as a potent tool for constructing high-performance optical devices.

Compact magneto-optical traps using planar optics

Magneto-optical traps (MOTs) composed of magnetic fields and light fields have been widely utilized to cool andconfine microscopic particles. Practical technology applications require miniaturized MOTs. The advancement of planaroptics has promoted the development of compact MOTs. In this article, we review the development of compact MOTs basedon planar optics. First, we introduce the standardMOTs. We then introduce the gratingMOTs with micron structures, whichhave been used to build cold atomic clocks, cold atomic interferometers, and ultra-cold sources. Further, we introducethe integrated MOTs based on nano-scale metasurfaces. These new compact MOTs greatly reduce volume and powerconsumption, and provide new opportunities for fundamental research and practical applications.

Research status and challenges in the manufacturing of IR conformal optics

The infrared conformal window is one of the most critical components in aircraft.Conformal windows with high performance bring low aberrations,high aerodynamic performance,reliability in extreme working environments,and added value for aircraft.Through the past decades,remarkable advances have been achieved in manufacturing technologies for conformal windows,where the machining accuracy approaches the nanometer level,and the surface form becomes more complex.These advances are critical to aircraft development,and these manufacturing technologies also have significant reference values for other directions of the ultra-precision machining field.In this review,the infrared materials suitable for manufacturing conformal windows are introduced and compared with insights into their performances.The remarkable advances and concrete work accomplished by researchers are reviewed.The challenges in manufacturing conformal windows that should be faced in the future are discussed.

Two-photon polymerization lithography for imaging optics

Optical imaging systems have greatly extended human visual capabilities,enabling the observation and understanding of diverse phenomena.Imaging technologies span a broad spectrum of wavelengths from x-ray to radio frequencies and impact research activities and our daily lives.Traditional glass lenses are fabricated through a series of complex processes,while polymers offer versatility and ease of production.However,modern applications often require complex lens assemblies,driving the need for miniaturization and advanced designs with micro-and nanoscale features to surpass the capabilities of traditional fabrication methods.Three-dimensional(3D)printing,or additive manufacturing,presents a solution to these challenges with benefits of rapid prototyping,customized geometries,and efficient production,particularly suited for miniaturized optical imaging devices.Various 3D printing methods have demonstrated advantages over traditional counterparts,yet challenges remain in achieving nanoscale resolutions.Two-photon polymerization lithography(TPL),a nanoscale 3D printing technique,enables the fabrication of intricate structures beyond the optical diffraction limit via the nonlinear process of two-photon absorption within liquid resin.It offers unprecedented abilities,e.g.alignment-free fabrication,micro-and nanoscale capabilities,and rapid prototyping of almost arbitrary complex 3D nanostructures.In this review,we emphasize the importance of the criteria for optical performance evaluation of imaging devices,discuss material properties relevant to TPL,fabrication techniques,and highlight the application of TPL in optical imaging.As the first panoramic review on this topic,it will equip researchers with foundational knowledge and recent advancements of TPL for imaging optics,promoting a deeper understanding of the field.By leveraging on its high-resolution capability,extensive material range,and true 3D processing,alongside advances in materials,fabrication,and design,we envisage disruptive solutions to current challenges and a promising incorporation of TPL in future optical imaging applications.

Imaging of human parafoveal area with large field of view in adaptive optics line scanning ophthalmoscope

The parafoveal area,with its high concentration of photoreceptors andfine retinal capillaries,is crucial for central vision and often exhibits early signs of pathological changes.The current adaptive optics scanning laser ophthalmoscope(AOSLO)provides an excellent tool to acquire accurate and detailed information about the parafoveal area with cellular resolution.However,limited by the scanning speed of two-dimensional scanning,thefield of view(FOV)in the AOSLO system was usually less than or equal to 2,and the stitching for the parafoveal area required dozens of images,which was time-consuming and laborious.Unfortunately,almost half of patients are unable to obtain stitched images because of their poorfixation.To solve this problem,we integrate AO technology with the line-scan imaging method to build an adaptive optics line scanning ophthalmoscope(AOLSO)system with a larger FOV.In the AOLSO,afocal spherical mirrors in pairs are nonplanar arranged and the distance and angle between optical elements are optimized to minimize the aberrations,two cylinder lenses are orthogonally placed before the imaging sensor to stretch the point spread function(PSF)for sufficiently digitizing light energy.Captured human retinal images show the whole parafoveal area with 55FOV,60 Hz frame rate and cellular resolutions.Take advantage of the 5FOV of the AOLSO,only 9 frames of the retina are captured with several minutes to stitch a montage image with an FOV of 99,in which photoreceptor counting is performed within approximately 5eccentricity.The AOLSO system not only provides cellular resolution but also has the capability to capture the parafoveal region in a single frame,which offers great potential for noninvasive studying of the parafoveal area.

Special issue:Catenary optics and catenary electromagnetics

As a natural mathematical form,a catenary is the curve that a hanging chain or cable adopts under its own weight when supported at its ends in a homogeneous gravitational field.This unique shape arises from the balance of forces acting on each segment of the chain,resulting in a curve described by hyperbolic cosine functions.Catenary functions play pivotal roles in describing the electromagnetic field,intensity distribution,and dispersion of structured light on the sub-wavelength scale^(1).

Iterative physical optics method based on efficient occlusion judgment with bounding volume hierarchy technology

This paper builds a binary tree for the target based on the bounding volume hierarchy technology,thereby achieving strict acceleration of the shadow judgment process and reducing the computational complexity from the original O(N^(3))to O(N^(2)logN).Numerical results show that the proposed method is more efficient than the traditional method.It is verified in multiple examples that the proposed method can complete the convergence of the current.Moreover,the proposed method avoids the error of judging the lit-shadow relationship based on the normal vector,which is beneficial to current iteration and convergence.Compared with the brute force method,the current method can improve the simulation efficiency by 2 orders of magnitude.The proposed method is more suitable for scattering problems in electrically large cavities and complex scenarios.

The Educational Adaptive-optics Solar Telescope at the Shanghai Astronomy Museum

The Educational Adaptive-optics Solar Telescope(EAST)at the Shanghai Astronomy Museum has been running routine astronomical observations since 2021.It is a 65-cm-aperture Gregorian solar telescope for scientific education,outreach,and research.The telescope system is designed in an“open”format so that the solar tower architecture can be integrated with it,and visitors can watch the observations live from inside the tower.Equipped with adaptive optics,a high-resolution imaging system,and an integral field unit spectro-imaging system,this telescope can obtain high-resolution solar images in the TiO and Hαbands,and perform spectral image reconstruction using 400 optical fibers at selected wavelengths.It can be used not only in public education and scientific outreach but also in solar physics research.

基于OPTICS聚类的电力通信网跨层保护系统设计

电力通信网跨层传输数据时,受到噪声数据影响,导致跨层数据传输耗时长、电流畸变率高。为了保证跨层通信安全,设计基于密度的聚类算法(Ordering Points To Identify the Clustering Structure,OPTICS)的电力通信网跨层保护系统。构建并联有源电力滤波器安全保护电路,保证三相四线制限幅后具有良好谐波补偿效果。通过跨层控制主动切换模块,实现目标通信链路下达指令的主动切换。对电力通信网跨层数据进行OPTICS聚类处理,结合Laplace机制添加对称指数分布噪声,将Laplace噪声添加到聚类簇中,输出添加噪声后结果存储在输出队列中,完成通信网跨层保护。由系统测试结果可知,该系统传输耗时少,且在10 s测试时间内跨层电流畸变率仅为21%,能够起到保护通信网跨层传输的作用。

使用均值距离与关联性标记的并行OPTICS算法

针对大数据环境下传统并行密度聚类算法中存在的数据划分不合理,聚类结果准确度不高,结果受参数影响较大以及并行效率低等问题,提出一种MapReduce下使用均值距离与关联性标记的并行OPTICS算法——POMDRM-MR。算法使用一种基于维度稀疏度的减少边界点划分策略(DS-PRBP),划分数据集;针对各个分区,提出标记点排序识别簇算法(MOPTICS),构建数据点与核心点之间的关联性,并标记数据点迭代次数,在距离度量中,使用领域均值距离策略(FMD),计算数据点的领域均值距离,代替可达距离排序,输出关联性标记序列;最后结合重排序序列提取簇算法(REC),对输出序列进行二次排序并提取簇,提高算法局部聚类的准确性和稳定性;在合并全局簇时,算法提出边界密度筛选策略(BD-FLC),计算筛选密度相近局部簇;又基于n叉树的并集型合并与MapReduce模型,提出并行局部簇合并算法(MCNT-MR),加快局部簇收敛,并行合并局部簇,提升全局簇合并效率。对照实验表明,POMDRM-MR算法聚类效果更佳,且在大规模数据集下算法的并行化性能更好。

Development of multi-band and high-speed visible endoscope diagnostic on EAST with catadioptric optics

A new multi-band and high-speed endoscope diagnostic for the observation of visible light has been successfully developed on the Experimental Advanced Superconducting Tokamak.The mirror with an aperture is designed at the head of the optical system.Based on two dichroic mirrors,the system is divided into three imaging mirror groups with different bands,i.e.B(380-500 nm),G(500-580 nm)and R(580-750 nm)bands,and its focal length is 16 mm with a relatively large aperture of D/f=1:4.The spatial resolution is less than 5 mm near the object distance of 1750 mm with the camera NAC ACS-1 M60.This optical system will be used to contrastively study both the spatial distribution and time evolution of different impurities in the same field of view.The experimental results confirm that it can be applied to the recognition of plasma boundary and related physical research.

基于D-OPTICS算法的网约车载客热点区域挖掘

为准确分析网约车载客高需求热点区域,考虑载客热点聚类中车辆行驶距离的约束,采用结合Dijkstra寻路算法的OPTICS算法,提出寻路密度OPTICS(D-OPTICS)算法。DOPTICS算法利用车辆轨迹数据进行空间聚类研究分析载客热点区域。通过道路网络拓扑结构提取各路段节点,采用Dijkstra算法进行寻路并以路段为单位提取邻域范围内载客点进行聚类。将成都市网约车轨迹数据进行热点区域的挖掘和分析。与传统OPTICS算法相比,所提算法考虑了道路距离的约束,提高了载客热点聚类稳定性和精度,获取的载客热点区域更贴合实际情况。

Plasma optics:A perspective for high-power coherent light generation and manipulation

Over the last two decades,the importance of fully ionized plasmas for the controlled manipulation of high-power coherent light has increased considerably.Many ideas have been put forward on how to control or change the properties of laser pulses such as their frequency,spectrum,intensity,and polarization.The corresponding interaction with a plasma can take place either in a self-organizing way or by prior tailoring.Considerable work has been done in theoretical studies and in simulations,but at present there is a backlog of demand for experimental veri-fication and the associated detailed characterization of plasma-optical elements.Existing proof-of-principle experiments need to be pushed to higher power levels.There is little doubt that plasmas have huge potential for future use in high-power optics.This introduction to the special issue of Matter and Radiation at Extremes devoted to plasma optics sets the framework,gives a short historical overview,and briefly describes the various articles in this collection.

The Perturbed Riemann Problem for a Geometrical Optics System

The perturbed Riemann problem for a hyperbolic system of conservation laws arising in geometrical optics with three constant initial states is solved.By studying the interactions among of the delta-shock,vacuum,and contact discontinuity,fourteen kinds of structures of Riemann solutions are obtained.The compound wave solutions consisting of delta-shocks,vacuums,and contact discontinuities are found.The single and double closed vacuum cavitations develop in solutions.Furthermore,it is shown that the solutions of the Riemann problem for the geometrical optics system are stable under certain perturbation of the initial data.Finally,the numerical results completely coinciding with theoretical analysis are presented.

Special issue on digital and intelligent optics

Innovations in artificial intelligence have revolutionized various areas,especially optics.The rapid development of novel optoelectronic devices at nanoscale has exhibited the multiple functionalities,high integration,compactness,fast modulation and scalability,showcasing new breakthroughs of digital optics and optoelectronic processors for intelligent computations.

OPTICS算法在雷电临近预报中的应用

针对密度分布不均的雷电定位资料,提出了一种基于OPTICS聚类算法的雷电临近预警模型。该模型运用OPTICS算法对雷暴天气连续时段的雷电定位资料进行聚类分析,有效剔除了影响雷暴云分布的稀疏点。在聚类分析结果基础上,利用"膨胀-侵蚀"算法还原雷暴云真实分布,根据雷暴云的移动趋势进行雷电落区预报。此外,针对传统预测算法运行时间长的缺陷,运用邻接表改进了OPTICS算法,且优化了可达队列更新策略。实验结果表明,基于改进的OPTICS算法所构建的雷电临近预报模型降低了算法运行时间,同时提高了雷电预报模型适应能力及预测的准确率。

一种基于网格与加权信息熵的OPTICS改进算法

针对现有OPTICS算法时间复杂度高且不适用于数据密集型环境的问题,提出一种基于网格与加权信息熵的改进算法。将数据集合划分为一定数量的网格单元,引入加权信息熵,自适应计算每个网格单元的最小密度阈值。对满足最小密度阈值的网格单元定义密集格的概念,利用质心点代替网格数据点集的方法对数据点进行压缩。采用Geolife Trajectories数据集对算法性能进行测试,从理论分析和实验结果两方面证明了改进算法的有效性。

改进的OPTICS算法及其在文本聚类中的应用

基于密度的OPTICS聚类算法以可视化的结果输出方式直观呈现语料结构,但由于其结果组织策略在处理稀疏点时的局限性,算法实际性能未能得到充分发挥。本文针对此缺陷提出一种有效的结果重组织策略以辅助稀疏点的重新定位,并针对文本领域的特点改变距离度量方法,形成了OPTICS-Plus文本聚类算法。在真实文本分类语料上的实验表明,我们的结果重组织策略能够辅助算法产生更为清晰反映语料结构的可达图,与K-means算法的比较则证实了OPTICS-Plus具有较为良好的聚类性能。