Coupler conditioning and high power testing of ADS Spoke cavity

Power couplers, used in China-ADS proton linac injector I, are required to transfer 6 kW RF power to the superconducting Spoke cavities. At present, first the two couplers of a coaxial design have been fabricated, which accomplished a high power test at IHEP. The test results indicated that couplers of this design are qualified to deliver 10 kW RF power in continuous travelling wave mode. This paper describes the coupler＇s room temperature test procedures and results and discusses the original high power test, which was terminated due to serious out-gassing and after some modifications. In the final test, the couplers smoothly exceeded the design power level.

Localizing Test Power Consumption for Scan Testing

A two stage scan architecture is proposed to do low power and low test application cost scan testing. The first stage includes multiple scan chains, where each scan chain is driven by a primary input. Each scan flip-flop in the multiple scan chains drives a group of scan flip-flops. The scan flip-flop in the multiple scan chain and the scan flip-flop driven by it are assigned the same values for all test vectors. Scan flip-flops in the multiple scan chains and those in the second stage use separate clock signals, but the design for testability technqiue needs only one clock. The proposed scan architecture localizes test power consumption to the multiple scan chains during test application. Test signals assigned to scan flip-fiops in the multiple scan chains are applied to the scan flip-flops in the second stage after the test vector has been applied to the multiple scan chains. This technique can make test power consumption very small.

The first power generation test of hot dry rock resources exploration and production demonstration project in the Gonghe Basin,Qinghai Province,China

Hot dry rock(HDR)is a kind of clean energy with significant potential.Since the 1970s,the United States,Japan,France,Australia,and other countries have attempted to conduct several HDR development research projects to extract thermal energy by breaking through key technologies.However,up to now,the development of HDR is still in the research,development,and demonstration stage.An HDR exploration borehole(with 236℃ at a depth of 3705 m)was drilled into Triassic granite in the Gonghe Basin in northwest China in 2017.Subsequently,China Geological Survey(CGS)launched the HDR resources exploration and production demonstration project in 2019.After three years of efforts,a sequence of significant technological breakthroughs have been made,including the genetic model of deep heat sources,directional drilling and well completion in high-temperature hard rock,large-scale reservoir stimulation,reservoir characterization,and productivity evaluation,reservoir connectivity and flow circulation,efficient thermoelectric conversion,monitoring,and geological risk assessment,etc.Then the whole-process technological system for HDR exploration and production has been preliminarily established accordingly.The first power generation test was completed in November 2021.The results of this project will provide scientific support for HDR development and utilization in the future.

Matched Filter Based Spectrum Sensing When Primary User Has Multiple Power Levels

In this paper,we investigate the matched filter based spectrum sensing in a more reasonable cognitive radio(CR) scenario when the primary user(PU) has more than one transmit power levels,as regulated in most standards,i.e.,IEEE 802.11 Series,GSM,LTE,LTE-A,etc.This new multiple primary transmit power(MPTP) scenario is specialized by two different targets:detecting the presence of PU and identifying the power level.Compared to the traditional binary sensing where only the presence of PU is checked,SU may attain more information about the primary network(making CR more "intelligent") and design the subsequent optimization strategy.The key technology is the multiple hypothesis testing as opposed to the traditional binary hypothesis testing.We discuss two situations under whether the channel phase is known or not,and we derive the closed form solutions for decision regions and several performance metrics,from which some interesting phenomenons are observed and the related discussions are presented.Numerical examples are provided to corroborate the proposed studies.

Lifetime estimation of IGBT module using square-wave loss discretization and power cycling test

The insulated gate bipolar transistor(IGBT)module is one of the most age-affected components in the switch power supply, and its reliability prediction is conducive to timely troubleshooting and reduction in safety risks and unnecessary costs. The pulsed current pattern of the accelerator power supply is different from other converter applications;therefore, this study proposed a lifetime estimation method for IGBT modules in pulsed power supplies for accelerator magnets. The proposed methodology was based on junction temperature calculations using square-wave loss discretization and thermal modeling.Comparison results showed that the junction temperature error between the simulation and IR measurements was less than 3%. An AC power cycling test under real pulsed power supply applications was performed via offline wearout monitoring of the tested power IGBT module. After combining the IGBT4 PC curve and fitting the test results,a simple corrected lifetime model was developed to quantitatively evaluate the lifetime of the IGBT module,which can be employed for the accelerator pulsed power supply in engineering. This method can be applied to other IGBT modules and pulsed power supplies.

Study and performance test of 10 kW molten carbonate fuel cell power generation system

The use of high-temperature fuel cells as a power technology can improve the efficiency of electricity generation and achieve near-zero emissions of carbon dioxide.This work explores the performance of a 10 kW high-temperature molten carbonate fuel cell.The key materials of a single cell were characterized and analyzed using X-ray diffraction and scanning electron microscopy.The results show that the pore size of the key electrode material is 6.5 lm and the matrix material is a-LiAlO_(2).Experimentally,the open circuit voltage of the single cell was found to be 1.23 V.The current density was greater than 100 mA/cm^(2)at an operating voltage of 0.7 V.The 10 kW fuel cell stack comprised 80 single fuel cells with a total area of 2000 cm^(2)and achieved an open circuit voltage of greater than 85 V.The fuel cell stack power and current density could reach 11.7 kW and 104.5 mA/cm2 at an operating voltage of 56 V.The influence and long-term stable operation of the stack were also analyzed and discussed.The successful operation of a 10 kW high-temperature fuel cell promotes the large-scale use of fuel cells and provides a research basis for future investigations of fuel cell capacity enhancement and distributed generation in China.

APPROXIMATE POWER OF HETEROSCEDASTICITY TEST IN NONLINEAR MODELS WITH ARIMA（0,1,0） ERRORS

This paper presents an approach for estimating power of the score test, based on an asymptotic approximation to the power of the score test under contiguous alternatives. The method is applied to the problem of power calculations for the score test of heteroscedasticity in European rabbit data （Ratkowsky, 1983）. Simulation studies are presented which indicate that the asymptotic approximation to the finite-sample situation is good over a wide range of parameter configurations.

Power test method for LED backlight LCD TVs and software development

As the appearance of local dimming technique, the current existing test methods are not suitable for testing the power consumption of the LCD TVs using the local dimming technique any longer. A test method appropriate to LED backlight LCD TVs using the local dimming technique is proposed in this paper, and then the test software is developed. The results demonstrate that the test software developed can show the real average power consumption of the LCD using local dimming technique, and by normalization the power consumption become comparable for not only local dimming LCD TVs but global dimming LCD TVs. Using the software developed in this paper, the ratio of power saving is clear when an LCD TV using the local dimming technique compared with one without local dimming technique.

Validity and Reproducibility of the Garmin Vector Power Meter When Compared to the SRM Device

Mobile power meters allow for cyclists to monitor power output （PO） during training and competition. The Garrnin Vector power meter （VPM） measures PO at the pedal compared to the crank and has been tested in only a few limited studies. The purpose of this study was to determine the validity and reproducibility of the VPM by comparing it to the SRM. The VPM validity was tested by （1） a submaximal incremental test, （2） submaximal constant power test, （3） sprint test, and （4） a field test. The reliability of the VPM was tested by repeating the laboratory tests 10 times over a 6 week span. Significant differences （P = 0.046） were found between the mean POSRM （178 ± 1.8 W） and POVPM （163.5 ± 14.7 W） for the submaximal constant-power test. No significant differences were found between the POMAX SRM and the POMAx VPM. The reproducibility of the VPM was lower than the SRM （CV = 8.52 ±4.0 vs 3.48 ± 1.9, 10.66% vs 5.50%, and 67.7% vs 55.3% for the submaximal incremental test, submaximal constant-power test, and field test respectively）. The POVPM appears to underestimate the POSRM and is less valid and reliable across various cycling efforts.

Uniformly Most Powerful Invariant Test and Its Application

The authors consider the uniformly most powerful invariant test of the testing problems (Ⅰ) H 0: μ′Σ -1 μ≥CH 1: μ′Σ -1 μ<C and (Ⅱ) H 00 : β′X′Xβσ 2≥CH 11 : β′X′Xβσ 2<C under m dimensional normal population N m(μ, Σ) and normal linear model (Y, Xβ, σ 2) respectively. Furthermore, an application of the uniformly most powerful invariant test is given.

Comparison of Two Sample Tests Using Both Relative Efficiency and Power of Test

This paper, comparison of two sample tests, is motivated by the fact that in the test of significant difference between two independent samples, numerous methods can be adopted;each may lead to significant different results;this implies that wrong choice of test statistic could lead to erroneous conclusion. To prevent misleading information, there is a need for proper investigation of some selected methods for test of significant difference between variables/subjects most especially, independent samples. The paper examines the efficiency and sensitivity of four test statistics to ascertain which test performs better. Based on the results, the relative efficiency favours median test as being more efficient than modified median test for both symmetric and asymmetric distributions. In terms of power of test, median test is more sensitive than Modified Median (MMED) test since it has higher power irrespective of the sample sizes for both symmetric and asymmetric distribution. In terms of relative efficiency for asymmetric distribution Modified Mann-Whitney U test is more efficient than Mann-Whitney U test (MMWU), and then for symmetric distribution, Mann-Whitney U test (MMWU) is more efficient than Modified Mann-Whitney in sample size of 5;but for other sample sizes considered Modified Mann-Whitney U test (MMWU) is better than Mann-Whitney. Using power of test for both symmetric and asymmetric distributions, Mann-Whitney is more sensitive than Modified Mann-Whitney U test (MMWU) because it has higher power.

Review on Commissioning Test of Three Gorges Power Transmission & Substation Project

Holding the greatest power transmission capacity in China, Three Gorges power transmission and substation (T&S) project is an important landmark in the

A Simulation Based Comparison of Correlation Coefficients with Regard to Type I Error Rate and Power

In this simulation study, five correlation coefficients, namely, Pearson, Spearman, Kendal Tau, Permutation-based, and Winsorized were compared in terms of Type I error rate and power under different scenarios where the underlying distributions of the variables of interest, sample sizes and correlation patterns were varied. Simulation results showed that the Type I error rate and power of Pearson correlation coefficient were negatively affected by the distribution shapes especially for small sample sizes, which was much more pronounced for Spearman Rank and Kendal Tau correlation coefficients especially when sample sizes were small. In general, Permutation-based and Winsorized correlation coefficients are more robust to distribution shapes and correlation patterns, regardless of sample size. In conclusion, when assumptions of Pearson correlation coefficient are not satisfied, Permutation-based and Winsorized correlation coefficients seem to be better alternatives.

Unit 1 of Ling’ao Nuclear Power Plant phase II underwent hot functional test successfully

On February 25, the Unit 1 of Ling’ao Nuclear Power Plant phase II underwent a 41-day-long hot functional test successfully with its major systems satisfying the requirements for

Dimension Reduction for Detecting a Difference in Two High-Dimensional Mean Vectors

We consider the efficacy of a proposed linear-dimension-reduction method to potentially increase the powers of five hypothesis tests for the difference of two high-dimensional multivariate-normal population-mean vectors with the assumption of homoscedastic covariance matrices. We use Monte Carlo simulations to contrast the empirical powers of the five high-dimensional tests by using both the original data and dimension-reduced data. From the Monte Carlo simulations, we conclude that a test by Thulin [1], when performed with post-dimension-reduced data, yielded the best omnibus power for detecting a difference between two high-dimensional population-mean vectors. We also illustrate the utility of our dimension-reduction method real data consisting of genetic sequences of two groups of patients with Crohn’s disease and ulcerative colitis.

The monotonic increasing relationship between average powers of CMOS VLSI circuits with and without delay and its applications

The authors theoretically describe the monotonic increasing relationship between average powers of a CMOS VLSI circuit with and without delay. The power of an ideal circuit without delay, which can be fast computed, has been used as the evaluation criterion for the power of a practical circuit with delay, which needs more computing time, in such fields as fast estimation for the average power and the maximum power, and fast optimization for the low test power. The authors propose a novel simulation approach that uses delay-free power to compact a long input vector pair sequence into a short sequence and then, uses the compacted one to fast simulate the average (or maximum) power for a CMOS circuit. In comparison with the traditional simulation approach that uses an un-compacted input sequence to simulate the average (or maximum) power, experiment results demonstrate that in the field of fast estimation for the average power, the present approach can be 6-10 times faster without significant loss in accuracy (less than 3.5% on average), and in the field of fast estimation for the maximum power, this approach can be 6? times faster without significant loss in accuracy (less than 5% on average). In the field of fast optimization for the test power, the authors propose a novel delay-free power optimization approach for the test power. Experiment results demonstrate that, in comparison with the approach of direct optimization and the approach of Hamming distance optimization, this approach is of the highest optimization efficiency because it needs shorter time (16.84%) to obtain a better optimization effect (reducing 35.11% test power).

Power test of the separated function RFQ accelerator

The progress of the Separated Function RFQ (SFRFQ) accelerator, which can raise the field gradient of acceleration while maintaining the transverse focusing power sufficient for high current beam, is presented. In order to demonstrate the feasibilities of the novel accelerator, a prototype cavity was designed and constructed. Correspondingly, a code SFRFQCODEV1.0 was developed specially for cavity design and beam dynamics simulation. The prototype cavity will be verified as a post-accelerator for ISR RFQ-1000 (Integral Split Ring RFQ) and accelerate O+ from 1 MeV to 1.6 MeV. To inject a higher current oxygen beam for the prototype cavity, the beam current of ISR RFQ-1000 was upgraded to 2 mA. The status of high power and beam test preparation for the prototype cavity are presented in this paper.

Development of a 500 MHz high power RF test stand

A flexible high power RF test stand has been designed and constructed at IHEP to test a variety of 500 MHz superconducting RF components for the upgrade project of the Beijing Electron Positron Collider （BEPC ）, such as the input coupler, the higher order modes （HOMs） absorber and so on. A high power input coupler has been conditioned and tested with the RF power up to 250 kW in continuous wave （CW）, traveling wave （TW） mode and 150 kW CW in standing wave （SW） mode. A prototype of the HOMs absorber has been tested to absorb power of 4.4 kW. An introduction of the test stand design, construction and high power tests is presented in this paper.

Reducing test-data volume and test-power simultaneously in LFSR reseeding-based compression environment

This paper presents a new test scheme based on scan block encoding in a linear feedback shift register （LFSR） reseeding-based compression environment.Meanwhile,our paper also introduces a novel algorithm of scan-block clustering.The main contribution of this paper is a flexible test-application framework that achieves significant reductions in switching activity during scan shift and the number of specified bits that need to be generated via LFSR reseeding.Thus,it can significantly reduce the test power and test data volume.Experimental results using Mintest test set on the larger ISCAS＇89 benchmarks show that the proposed method reduces the switching activity significantly by 72%-94%and provides a best possible test compression of 74%-94%with little hardware overhead.

First Superconducting RF System Commissioning for BEPCⅡ in China

The BEPC RF system has been changed to superconducting cavities during the last four years.In the Summer of 2006,the high power test had been successfully carried.In November,the East RF was put into commis- sioning.The SRF system above 1.0MV voltage has been reached with the e^+/e^- collision beam over 100mA,and the beam current improved to 2.5GeV/250mA with 100kW beam power.The beam test shows the good matching of the RF parameters with measuring value and theoretic calculation.The commissioning and the high power test will be presented in this paper.