Cu-based materials for electrocatalytic CO_(2) to alcohols:Reaction mechanism,catalyst categories,and regulation strategies

Electrocatalytic CO_(2) reduction reaction(CO_(2)RR)technology,which enables carbon capture storage and resource utilization by reducing CO_(2) to valuable chemicals or fuels,has become a global research hotspot in recent decades.Among the many products of CO_(2)RR(carbon monoxide,acids,aldehydes and alcohols,olefins,etc.),alcohols(methanol,ethanol,propanol,etc.)have a higher market value and energy density,but it is also more difficult to produce.Copper is known to be effective in catalyzing CO_(2) to high valueadded alcohols,but with poor selectivity.The progress of Cu-based catalysts for the selective generation of alcohols,including copper oxides,bimetals,single atoms and composites is reviewed.Meanwhile,to improve Cu-based catalyst activity and modulate product selectivity,the modulation strategies are straighten out,including morphological regulation,crystalline surface,oxidation state,as well as elemental doping and defect engineering.Based on the research progress of electrocatalytic CO_(2) reduction for alcohol production on Cu-based materials,the reaction pathways and the key intermediates of the electrocatalytic CO_(2)RR to methanol,ethanol and propanol are summarized.Finally,the problems of traditional electrocatalytic CO_(2)RR are introduced,and the future applications of machine learning and theoretical calculations are prospected.An in-depth discussion and a comprehensive review of the reaction mechanism,catalyst types and regulation strategies were carried out with a view to promoting the development of electrocatalytic CO_(2)RR to alcohols.

Study on trifluoromethanesulfonic acid-promoted synthesis of daidzein: Process optimization and reaction mechanism

Daidzein has been widely used in pharmaceuticals,nutraceuticals,cosmetics,feed additives,etc.Its preparation process and related reaction mechanism need to be further investigated.A cost-effective process for synthesizing daidzein was developed in this work.In this article,a two-step synthesis of daidzein(Friedel–Crafts acylation and[5+1]cyclization)was developed via the employment of trifluoromethanesulfonic acid(TfOH)as an effective promoting reagent.The effect of reaction conditions such as solvent,the amount of TfOH,reaction temperature,and reactant ratio on the conversion rate and the yield of the reaction,respectively,was systematically investigated,and daidzein was obtained in 74.0%isolated yield under optimal conditions.Due to the facilitating effect of TfOH,the Friedel–Crafts acylation was completed within 10 min at 90℃ and the[5+1]cyclization was completed within 180 min at 25℃.In addition,a possible reaction mechanism for this process was proposed.The results of the study may provide useful guidance for industrial production of daidzein on a large scale.

The reaction mechanism and interfacial crystallization of Al nanoparticle-embedded Ni under shock loading

The shock-induced reaction mechanism and characteristics of Ni/Al system,considering an Al nanoparticle-embedded Ni single crystal,are investigated through molecular dynamics simulation.For the shock melting of Al nanoparticle,interfacial crystallization and dissolution are the main characteristics.The reaction degree of Al particle first increases linearly and then logarithmically with time driven by rapid mechanical mixing and following dissolution.The reaction rate increases with the decrease of particle diameter,however,the reaction is seriously hindered by interfacial crystallization when the diameter is lower than 9 nm in our simulations.Meanwhile,we found a negative exponential growth in the fraction of crystallized Al atoms,and the crystallinity of B2-NiAl(up to 20%)is positively correlated with the specific surface area of Al particle.This can be attributed to the formation mechanism of B2-NiAl by structural evolution of finite mixing layer near the collapsed interface.For shock melting of both Al particle and Ni matrix,the liquid-liquid phase inter-diffusion is the main reaction mechanism that can be enhanced by the formation of internal jet.In addition,the enhanced diffusion is manifested in the logarithmic growth law of mean square displacement,which results in an almost constant reaction rate similar to the mechanical mixing process.

Study of the reaction mechanism for preparing powdered activated coke with SO_(2)adsorption capability via one-step rapid activation method under flue gas atmosphere

In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.

Insights into kinetics and reaction mechanism of acid-catalyzed transesterification synthesis of diethyl oxalate

The catalytic performance of different acidic catalysts for diethyl oxalate synthesis from the one-step transesterification of dimethyl oxalate and ethanol was evaluated.The effects of different factors(e.g.,acidity,electron accepting capacity,cations type and crystalline water)on the catalytic activity of acidic catalysts were investigated respectively.It was proposed and confirmed that the transesterification reaction catalyzed by a Lewis acid(FeCl3)and a Bronsted acid(H2SO4)follows a first-order kinetic reaction process.In addition,the Lewis acid-catalyzed transesterification processes with different ester structures were used to further explore and understand the speculated reaction mechanism.This work enriches the theoretical understanding of acid-catalyzed transesterification reactions and is of great significance for the development of highly active catalysts for diethyl oxalate synthesis,diminishing the industrial production cost of diethyl oxalate,and developing downstream bulk or high-value-added industrial products.

Promotional roles of ZrO_2 and WO_3 in V_2O_5-WO_3/TiO_2-ZrO_2 catalysts for NO_x reduction by NH_3:Catalytic performance,morphology,and reaction mechanism

V2O5/TiO2-ZrO2 catalysts containing various amounts of WO3 were synthesized.The catalyst morphologies,catalytic performances,and reaction mechanisms in the selective catalytic reduction of NOx by NH3 were investigated using in situ diffuse-reflectance infrared Fourier-transform spectroscopy,temperature-programmed reduction（TPR）,X-ray diffraction,and the Brunauer-Emmett-Teller（BET） method.The BET surface area of the triple oxides increased with increasing ZrO2 doping but gradually decreased with increasing WO3 loading.Addition of sufficient WO3 helped to stabilize the pore structure and the combination of WO3 and ZrO2 improved dispersion of all the metal oxides.The mechanisms of reactions using V2O5-9%WO3/TiO2-ZrO2 and V2O5-9%WO3/TiO2were compared by using either a single or mixed gas feed and various pretreatments.The results suggest that both reactions followed the Eley-Ridel mechanism;however,the dominant acid sites,which depended on the addition of WO3 or ZrO2,determined the pathways for NOx reduction,and involved[NH4^＋-NO-Bronsted acid site]^＊ and[NH2-NO-Lewis acid site]^＊ intermediates,respectively.NH3-TPR and H2-TPR showed that the metal oxides in the catalysts were not reduced by NH3 and O2did not reoxidize the catalyst surfaces but participated in the formation of H2O and NO2.

Reaction mechanisms of low-grade molybdenum concentrate during calcification roasting process

The effects of Ca-based additives on roasting properties of low-grade molybdenum concentrate were studied. The resultsshow that calcium-based additives can react with molybdenum concentrate to form CaSO4 and CaMoO4. The initial oxidationtemperature of MoS2 is 450℃, while the formation of CaMoO4 and CaSO4 occurs above 500℃. The whole calcification reactionsare nearly completed between 600 and 650℃. However, raising the temperature further helps for the formation of CaMoO4 but isdisadvantageous to sulfur fixing rate and molybdenum retention rate. Calcification efficiency of Ca-based additives follows theorder： Ca（OH）2〉CaO〉CaCO3. With increasing the dosage of Ca（OH）2, the molybdenum retention rate and sulfur-fixing rate rise, butexcessive dosages would consume more acid during leaching process. The appropriate mass ratio of Ca（OH）2 to molybdenumconcentrate is 1：1. When roasted at 650 ℃ for 90 min, the molybdenum retention rate and the sulfur-fixing rate of low-grademolybdenum concentrate reach 100% and 92.92%, respectively, and the dissolution rate of molybdenum achieves 99.12% withcalcines being leached by sulphuric acid.

Reaction mechanism of preparation of titanium by electro-deoxidation in molten salt

The electro-deoxidation of TiO2 was investigated in molten CaCl2.Back electromotive force measurements,constant voltage electrolytic experiments,contrast experiments of different cathodes,and cyclic voltammograms were carried out for solving the puzzle of reduction mechanism.The results showed that the reduction process proceeded step by step.TiO2 was first reduced to Ti3O5 or Ti2O3,and then further reduced to Ti3O,Ti2O,TiO and Ti.In addition,direct electrochemical reduction of titanium dioxide was the primary cathodic reaction;meanwhile,some calciothermic reduction reactions also happened at the cathode.Cyclic voltammograms of solid titanium dioxide and molybdenum wire in molten salts with different compositions were also studied.

The pivotal effects of oxygen vacancy on Bi_2MoO_6:Promoted visible light photocatalytic activity and reaction mechanism

Bi2MoO6,a typical Bi-based photocatalyst,has received increasing interests and been widely applied in various fields.However,the visible light photocatalytic activity of Bi2MoO6 is still restricted by some obstacles,such as limited photo-response and low charge separation efficiency.In this work,we developed a facile method to introduce artificial oxygen vacancy into Bi2MoO6 microspheres,which could effectively address these problems and realize highly efficient visible light photocatalysis.The experimental and theoretical methods were combined to explore the effects of oxygen vacancy on the electronic structure,photocatalytic activity and the reaction mechanism toward NO removal.The results showed that the addition of NaBH4 during catalyst preparation induced the formation of oxygen vacancy in Bi2MoO6,which plays a significant role in extending the visible light absorption of Bi2MoO6.The visible light photocatalytic activity of Bi2MoO6 with oxygen vacancy was obviously enhanced with a NO removal ratio of 43.5%,in contrast to that of 25.0%with the pristine Bi2MoO6.This can be attributed to the oxygen vacancy that creates a defect energy level in the band gap of Bi2MoO6,thus facilitating the charge separation and transfer processes.Hence,more reactive radicals were generated and participated in the photocatalytic NO oxidation reaction.The in situ FT-IR was used to dynamically monitor the photocatalytic NO oxidation process.The reaction intermediates were observed and the adsorption-reaction mechanism was proposed.It was found that the reaction mechanism was unchanged by introducing the oxygen vacancy in Bi2MoO6.This work could provide new insights into the understanding of the oxygen vacancy in photocatalysis and gas-phase photocatalytic reaction mechanism.

Reaction Mechanism,Synthesis and Characterization of Urea-glyoxal(UG) Resin

The reaction mechanism of glyoxal （G） with urea （U） under weak acid condition was theoretically investigated at PW91/DNP/COSMO of quantum chemistry using density functional theory （DFT） method. The results show that the addition reaction of G with U under the conditions mainly involves the reactions of U with protonated glyoxal （p-G）, protonated 2,2-dihy- droxyacetaldehyde （p-G 1） and protonated bis-hemdiol （p-G2） to form two important carbocation reactive intermediates of C-p-UG and C-p-UG1, and two important hydroxyl compounds of UG and UG1. These compounds play important roles in the formation of UG resin. According to the result of quantum chemical calculation, UG resin was synthesized successfully under weak acid conditions. The UG resin was characterized by matrix assisted laser desorption ionization time of flight mass spectrometry （MALDI-TOF-MS）, ultraviolet and visible spectroscopy （UV-vis）, Fourier transform infrared spectroscopy （FT1R） and nuclear magnetic resonance spectroscopy （13CNMR and 1HNMR）. These instrumental analytical results agree with each other and further confirm the addition reaction pathway of glyoxal with urea proposed by quantum chemical calculation.

Theoretical Studies on Reaction Mechanisms of HNCS with NH(X^3Σ)

The reaction mechanisms of HNCS with NH（X^3∑ ） were theoretically investigated. The minimum energy paths （MEP） of the reaction were calculated by using the density functional theory（DFT） at the B3LYP/6-311 ＋ ＋ G^＊＊ level. The equilibrium structural parameters, the harmonic vibrational frequencies, the total energies, and the zeropoint energies（ZPE） of all the species were calculated. The single-point energies along the MEP were further refined at the QCISD（T）/6-311 ＋ ＋ G^＊ ＊ level. It was found that the mechanisms of the HNCS ＋ NH（X^3∑） reaction involve two channels producing the HNC ＋ HNS and the N2H2 ＋ CS products. Channel 1 plays a dominant role and the HNC ＋ HNS are the main preduets. The reaction is exothermie.

Study on Reaction Mechanism for Cracking FCC Gasoline on Acid Catalyst

This article is based on the experimental data on reaction of FCC naphtha in the presence of acid catalysts. The data published in the literature were reprocessed and compared with experimental data and the relationship of hydrogen and methane contained in the dry gas with the conversion rate was identified.The similarity between the route for cracking of olefin enriched FCC gasoline and the route for reaction of individual hydrocarbons was deduced, while the route for formation of ethylene in dry gas was also proposed to identify the relationship between the reaction path for formation of ethylene and the conversion rate.

SrTiO3/BiOI heterostructure: Interfacial charge separation, enhanced photocatalytic activity, and reaction mechanism

Heterostructured photocatalysts provide an effective way to achieve enhanced photocatalytic performances through efficient charge separation.Although both wide-and narrow-band-gap photocatalysts have been widely investigated,the charge separation and transfer mechanism at the contacting interface of the two has not been fully revealed.Here,a novel SrTiO3/BiOI(STB)heterostructured photocatalyst was successfully fabricated by using a facile method.The heterostructure in the photocatalyst extends the photoabsorption to the visible light range,and thus,high photocatalytic NO removal performance can be achieved under visible light irradiation.A combination of experimental and theoretical evidences indicated that the photogenerated electrons from the BiOI semiconductor can directly transfer to the SrTiO3 surface through a preformed electron delivery channel.Enhanced electron transfer was expected between the SrTiO3 and BiOI surfaces under light irradiation,and leads to efficient ROS generation and thus a high NO conversion rate.Moreover,in situ diffused reflectance infrared Fourier transform spectroscopy revealed that STB can better inhibit the accumulation of the toxic intermediate NO2 and catalyze the NO oxidation more effectively.This work presents a new insight into the mechanism of the interfacial charge separation in heterostructures and provides a simple strategy to promote the photocatalytic technology for efficient and safe air purification.

Microemulsion synthesis of ZnMn2O4/Mn3O4 sub-microrods for Li-ion batteries and their conversion reaction mechanism

The hierarchical ZnMn2O4/Mn3O4 composite sub-microrods were synthesized via a water-in-oil microemulsion method followed by calcination.The ZnMn2O4/Mn3O4 electrode displays an intriguing capacity increasing from 440 to 910 mA·h/g at 500 mA/g during 550 consecutive discharge/charge cycles,and delivers an ultrahigh capacity of 1276 mA·h/g at 100 mA/g,which is much greater than the theoretical capacity of either ZnMn2O4 or Mn3O4 electrode.To investigate the underlying mechanism of this phenomenon,cyclic voltammetry and differential capacity analysis were applied,both of which reveal the emergence and the growth of new reversible redox reactions upon charge/discharge cycling.The new reversible conversions are probably the results of an activation process of the electrode material during the cycling process,leading to the climbing charge storage.However,the capacity exceeding the theoretical value indicates that there are still other factors contributing to the increasing capacity.

Reaction mechanism of roasting Zn_2SiO_4 using NaOH

The reaction kinetics of roasting zinc silicate using NaOH was investigated.The orthogonal test was employed to optimize the reaction conditions and the optimized reaction conditions were as follows:molar ratio of NaOH to Zn2SiO4 of 16:1,reaction temperature of 550°C,and reaction time of 2.5 h.In order to ascertain the phases transformation and reaction processes of zinc oxide and silica,the XRD phase analysis was used to analyze the phases of these specimens roasted at different temperatures.The final phases of the specimen roasted at 600°C were Na2ZnO2,Na4SiO4,Na2ZnSiO4 and NaOH.The reaction kinetic equation of roasting was determined by the shrinking unreacted core model.Aiming to investigate the reaction mechanism,two control models of reaction rate were applied:chemical reaction at the particle surface and diffusion through the product layer.The results indicated that the diffusion through the product layer model described the reaction process well.The apparent activation energy of the roasting was 19.77 kJ/mol.

In situ reaction mechanism of MgAlON in Al–Al2O3–MgO composites at 1700°C under flowing N2

The Al–AlO–MgO composites with added aluminum contents of approximately 0wt%, 5wt%, and 10wt%, named as M, M, and M, respectively, were prepared at 1700°C for 5 h under a flowing Natmosphere using the reaction sintering method. After sintering, the Al–AlO–MgO composites were characterized and analyzed by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The results show that specimen Mwas composed of MgO and MgAlO. Compared with specimen M, specimens Mand Mpossessed MgAlON, and its production increased with increasing aluminum addition. Under an Natmosphere, MgO, AlO, and Al in the matrix of specimens Mand Mreacted to form MgAlON and AlN-polytypoids, which combined the particles and the matrix together and imparted the Al–AlO–MgO composites with a dense structure. The mechanism of MgAlON synthesis is described as follows. Under an Natmosphere, the partial pressure of oxygen is quite low; thus, when the Al–AlO–MgO composites were soaked at 580°C for an extended period, aluminum metal was transformed into AlN. With increasing temperature, AlOdiffused into AlN crystal lattices and formed AlN-polytypoids; however, MgO reacted with AlOto form MgAlO. When the temperature was greater than(1640 ± 10)°C, AlN diffused into AlOand formed spinel-structured AlON. In situ MgAlON was acquired through a solid-solution reaction between AlON and Mg AlOat high temperatures because of their similar spinel structures.

Study on the Reaction Mechanism of Naphthalene with Oxalyl Chloride

The reaction of naphthalene with oxalyl chloride in the presence of anhydrous AlCl3 was investigated. The homolog of dinaphthyl methanone can be obtained mainly from this reaction. Naphthalene conversion does not have evident correlation with the amount of AlCl3. The results show that the reaction proceeds via carbon cation electrophilic substitution reaction-free radical substitution reaction pathway.

Preparing low-oxygen Ti-6Al-4V alloy powder through direct reduction of oxides and its synergistic reaction mechanism

Ti-6Al-4V alloy powder was prepared through a two-step reduction of a mixture of TiO_(2),V_(2)O_(5) and Al_(2)O_(3) in this study.The oxide mixture was first reduced by Mg in MgCl_(2) at 750℃ in argon,where oxygen was reduced to 2.47 wt%from 40.02 wt%.The oxygen content in the final powder was eventually reduced to an extremely low level(0.055 wt%)using calcium at 900℃ in argon,and the final powder had the composition of 90.12 wt%Ti,5.57 wt%Al,and 3.87 wt%V,which meets the standard specification of Ti-6Al-4V(ASTM F1108-09).Between the two reductions,a heat treatment step was designed to help controlling the specific surface area and particle size.The effect of the heat treatment temperature on the morphology,and composition uniformity of the powder was investigated in detail.Heat treatment above 1300℃ attributed to a dense powder with a controlled specific surface area.Thermodynamic modeling and experimental results indicated that onlyα-Ti enriched with Al andβ-Ti enriched with V exist in the final powder,and other possible phases including Al-Mg and Al-V were excluded.This study also offers a triple-step thermochemical process for producing high-purity Ti-based alloy powder.

Reaction mechanism and kinetics of pressurized pyrolysis of Chinese oil shale in the presence of water

A study of reaction mechanisms and chemical kinetics of pressurized pyrolysis of Chinese Liushuhe oil shale in the presence of water were conducted using an autoclave for simulating and modeling in-situ underground thermal degradation.It was found that the oil shale was first pyrolyzed to form pyrobitumen,shale oil,shale gas and residue,then the pyrobitumen was further pyrolyzed to form more shale oil,shale gas,and residue.It means that there are two consecutive and parallel reactions.With increasing temperature,the pyrobitumen yield,as intermediate,first reached a maximum,then decreased to approximately zero.The kinetics results show that both these reactions are first order.The activation energy of pyrobitumen formation from oil shale is lower than that of shale oil formation from pyrobitumen.

Anode reaction mechanisms of Na|NaCl-CaCl2|Zn liquid metal battery

Na|NaCl-CaCl_(2)|Zn liquid metal battery is regarded as a promising energy storage system for power grids.Despite intensive attempts to present a real mechanism of metal electrodes reaction, those for Na||Zn LMBs are not clear yet. Herein, the anode reactions for the multiple discharge potential plateaus were deduced by means of FactSage thermochemical software, which were subsequently validated by X-ray diffraction analysis and the modeling of phase transformation in the cooling process. A pre-treatment process was proposed for the analysis of anode product composition using the atomic absorption spectrometry method, and the anode states at working temperature(560 ℃) were obtained by the Na-CaZn ternary phase for the first time. The results indicate the discharge of Na and Ca led to the formation of Ca-Zn intermetallic compounds, whilst the extraction of Ca in Ca-Zn intermetallic compounds was responsible for the multiple discharge plateaus. Moreover, it was found that the charging product was in electrochemical double liquid metal layers, which are composed of Na and Ca with dissolved Zn respectively.