Seasonal response of nitrogen exchange fluxes to crab disturbance at sediment-water interface in coastal tidal wetlands

Coastal wetlands are hotspots for nitrogen(N)cycling,and crab burrowing is known to transform N in intertidal marsh soils.However,the underlying mechanisms remain unclear.This study conducted field experiments and used indoor control test devices to investigate the seasonal response of nitrogen to crab disturbance at the sediment-water interface in coastal tidal flat wetlands.The results showed that crab disturbance exhibited significant seasonality with large seasonal differences in cave density and depth.Due to crab disturbance,nitrogen fuxes at the sediment-water interface were much greater in the box with crabs than in the box without crabs.In summer,NH-N showed a positive flux from the sediment to the overlying water,but NO2-N and NOg-N showed positive fluxes from the sediment to the overlying water only in early stages.In winter,NH-N showed a positive flux from the sediment to the overlying water,but NO-N and NO,-N both exhibited positive and negative fluxes.These results indicated that the presence of crab burrows can cause the aerobic layer to move downward by approximately 8-15 cm in summer and directly promote nitrification at the sediment surface.

Experimental research on the impact of Corbicula flumineaon DIN exchange at a tidal flat sediment-water interface

Based on a simulative experiment and a comparison analysis, the effect of bivalve Corbiculafluminea activity on sediment-water exchange of dissolved inorganic nitrogen （DIN） is studied. The areas included three intertidal flat sites of the Changjiang （Yangtze） River estuary in China. The interface exchange flux of ammonium, nitrate and nitrite in the short experiment （6 h） was -46.4-40, -74.8-929.1 and 2.5-14.6 μmol/（m^2·h）, respectively. It was found that the burrowing activities of C. fluminea increased NH4 and NOi release from sediments to overlying water in the short-term experiment. During long-term incubation, NH4 and NOi released in turn from the sediments. At the beginning of incubation, bioturbation by C. fluminea could accelerate NH2 release from sediments 2-17 times in different sites, resulting in stronger nitrification and increased NOi concentrations in the overlying water. Sediment profile analysis post-incubation shows that organic matter mineralization and sediment-water NH4 exchange had been stimulated by C. fluminea bioturbation and bioirrigation during the experiment. Therefore, C. fluminea activities such as excretion, burrowing, irrigation and turbation can effectively alter nitrogen dynamics and accelerate and stimulate nitrogen exchange and cycling at the sediment-water interface.

Influential factors on the exchange rate of dissolved inorganic nutrients at the sediment-water interface in Jiaozhou Bay, China

Incubation experiments are carried out to study the exchange rates of dissolved inorganic nutrients including silicate, phosphate, ammonium, nitrite, and nitrate (vSiO3-Si, vPO4-P, vNH4-N, vNO2-N and vNO3-N) at the sediment-water interface in the Jiaozhou Bay. Major factors influencing the exchange rates are discussed in detail, which include the dissolved inorganic nutrient concentrations in porewater (Cpw), water and clay contents, and grain size of the sediments (CH2O, Cclay and GSsed). The results may provide insight into the dynamics of nutrient transport and the environmental capacity of nutrients in Jiaozhou Bay, and should be beneficial to solving the problems caused by excessive nutrient input this area.

Nitrogen and Phosphorus Diffusive Fluxes Across the Sediment-Water Interface in Estuarine and Coastal Tidal Flats

Nitrogen and phosphorus contents are analyzed in the overlying waters and pore waters taken from the Changjiang Estuary and Shanghai coastal tidal flats in this study. In addition, the diffusion fluxes of nitrogen and phosphorus across the sediment-water interface in tidal flats are estimated according to the nutrient concentration gradients at the interface. It has been indicated that the concentrations of ammonium, nitrite, nitrate and dissolved phosphorus in overlying waters range from 0.0082-2.56, 0.03-0.58, 0.69-5.38 and 0.035-0.53 mg/L, respectively, while 0.0025 - 1.35 mg /L for NH^-N, 0. 0055 ~0.20mg/L for NO2-N, 0.61-1.14 mg/L for NO3-N and 0.11~0.53mg/L for DP insurface pore waters.The findings have revealed that ammonium, nitrite, nitrate and dissolved phosphorus diffusionfluxes across the sediment-water interface are between -0.024~0.99, -0.39~ -0.0019, -3.09--0.12 and -0.48- 0.12 ug/ (cm.d ) respectively, showing that the sediment in tidal flats is the source of phosphorus and an important sink for nitrogen in the waters.

Analysis of heat pulse signals determination for sediment-water interface fluxes

The heat pulse signal is analyzed in a new way with the goals of clarifying the relationships between the variables in the heat transfer problem and simplifying the procedure for calculating sediment-water interface fluxes J. Only three parameters x0 λand pc l are needed to calculate J by the heat pulse data for this analysis method.The results show that there is a curvilinear relationship between the peak temperature arrival time and sediment-water interface fluxes and there exists a simple linear relationship between sediment-water interface fluxes and the natural log of the ratio of the temperature increase downstream from the line heat source to the temperature increase upstream from the heat source.The simplicity of this relationship makes the heat pulse sensors an attractive option for measuring soil water fluxes.

Impact of Rice-Catfish/Shrimp Co-culture on Nutrients Fluxes Across Sediment-Water Interface in Intensive Aquaculture Ponds

Exchange of nitrogen and phosphorus across sediment-water interface plays an important role in the management of nutrient recycling in the aquaculture pond. In this study, a plot experiment was conducted to study the effect of rice-catfish/shrimp co-culture on the micro-profile of oxygen (O2), pH and nutrient exchange across sediment-water interface in the intensive culture ponds. The results showed that rice-catfish co-culture increased the concentration and penetrating depth of O2, but decreased the pH value across the sediment-water interface, compared with catfish monoculture. Additional rice cultivation significantly reduced the flux rates of ammonium (NH4+) and nitrate (NO3-) across sediment-water interface in the catfish and shrimp ponds. The flux rates of NO2 - and soluble phosphorus (PO43-) showed no significant difference between rice-catfish/shrimp co-culture ponds and catfish/shrimp monoculture ponds. Rice only affected the dissolved inorganic nitrogen and phosphorus fractions in the sediment. The concentrations of NH4 + were significantly lower in the sediment of co-culture ponds than in the monoculture ponds. Additional rice cultivation also significantly reduced the content and percentage of dissolved inorganic phosphorus in the sediment of catfish ponds.

The diffusive fluxes of inorganic nitrogen across the intertidal sediment-water interface of the Changjiang Estuary in China

Ammonium and nitrate concentrations were analyzed in near-bottom water and pore water collected from ten stations of the intertidal flat of the Changjiang Estuary during April, July, November and February. The magnitudes of the benthic exchange fluxes were determined on the basis of concentration gradients of ammonium and nitrate at the near-bottom water and interstitial water interface in combination with calculations of a modified Fick＇ s first law. Ammonium fluxes varied from - 5.05 to 1.43 μg/（ cm^2·d） and were greatly regulated by the production of ammonium in surface sediments, while nitrate fluxes ranged from - 0. 38 to 1.36 μg/ （ cm^2·d） and were dominated by nitrate concentrations in the tidal water. It was found that ammonium was mainly released from sediments into water columns at most of stations whereas nitrate was mostly diffused from overlying waters to intertidal sediments. In total, 823.75 t/a ammonium-N was passed from intertidal sediments to water while about 521.90 t/a nitrate-N was removed from overlying waters to intertidal sediments. This suggests that intertidal sediments had the significant influence on modulating inorganic nitrogen in the tidal water.

The Influence of Element Diffusion at the Sediment-Water Interface on the Basic Chemical Composition of Overlying Water Mass in Lake Lugu, China

Little work has been done on the influence of sediments on the basic chemical composition of overlying water mass. This paper deals with the vertical profile of the basic constituents such as Ca2 +, K +, Na+, and HCO3, as well as of pH in the overlying water mass and sediment porewater of Lake Lugu-a semi-closed, deep lake in Yunnan Province. The results revealed that those basic constituents may diffuse and transport from bottom sediments to overlying water mass through porewater. In the paper are also quantitatively evaluated the diffusive fluxes and the extent of their influence on overlying water mass, indicating that the lake sediment-water interface diffusion plays an important role in controling the basic chemical composition of water in the whole lake.

The mechanisms of contaminants release due to incipient motion at sediment-water interface

Sediments in many rivers and lakes are subjected to resuspension due to a combination of hydrodynamics. However, the roles of contaminant-contained dissolved and particulate sediments during the resuspension release are rarely studied. This study focuses on the release quantity of contaminants in both water phase and solid phase. Conservative tracer （NaC1） and reactive tracer （Phosphorus） were respectively added to cohesive fine-grained sediments and non-cohesive coarse-grained sediments. A range of typical shear stress was conducted to characterize the time-depended release of contaminants in a laboratory flume. When the sediment started to move, the concentration of contaminant in the overlying water increased with the bed shear stress, but the dissolved contaminants responded faster than the particulate ones. The observed contaminant release process can be divided into three main stages： the initial two hours fast mixing： the release contribution of pore water could reach up to 75%; the middle 4-6 h adsorption： the partitioning coefficient of contaminant between water phase and solid phase decreased over the time, and the adsorption of contaminates from resuspended sediment dominated the negative release; the last equilibrium stage： the desorption and adsorption reached equilibrium, and the reactive contaminant made an impact on the water quality in the solid phase. The existing formulas to evaluate the release flux are far from practice meaning as the sediment contaminants undergo a very complex release process.

Multiple Tin Compounds Modified Carbon Fibers to Construct Heterogeneous Interfaces for Corrosion Prevention and Electromagnetic Wave Absorption

Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly urgent.Multi-component interface engineering is considered an effective means to achieve high-efficiency EMW absorption.However,interface modulation engineering has not been fully discussed and has great potential in the field of EMW absorption.In this study,multi-component tin compound fiber composites based on carbon fiber(CF)substrate were prepared by electrospinning,hydrothermal synthesis,and high-temperature thermal reduction.By utilizing the different properties of different substances,rich heterogeneous interfaces are constructed.This effectively promotes charge transfer and enhances interfacial polarization and conduction loss.The prepared SnS/SnS_(2)/SnO_(2)/CF composites with abundant heterogeneous interfaces have and exhibit excellent EMW absorption properties at a loading of 50 wt%in epoxy resin.The minimum reflection loss(RL)is−46.74 dB and the maximum effective absorption bandwidth is 5.28 GHz.Moreover,SnS/SnS_(2)/SnO_(2)/CF epoxy composite coatings exhibited long-term corrosion resistance on Q235 steel surfaces.Therefore,this study provides an effective strategy for the design of high-efficiency EMW absorbing materials in complex and harsh environments.

Research status and prospects of the fractal analysis of metal material surfaces and interfaces

As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal materials at various scales and dimensions.Conventional methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and interfaces.However,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal materials.From the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear surfaces.The relationship between the fractal dimensions and properties of metal material surfaces and interfaces is summarized.Starting from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be developed.It is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.

Advanced Functional Electromagnetic Shielding Materials:A Review Based on Micro‑Nano Structure Interface Control of Biomass Cell Walls

Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.

Seasonal release of Fe and Mn at the sediment-water interface in Aha Lake

The release of various harmful and poisonous elements from sediments to overlying water via pore water is one of the geochemical processes influencing and restricting the water quality of lakes. It is important for protecting and managing freshwater lakes to uncover and recognize the basic features and forming mechanism of this process.

Interface Engineering of Titanium Nitride Nanotube Composites for Excellent Microwave Absorption at Elevated Temperature

Currently,the microwave absorbers usually suffer dreadful electromagnetic wave absorption(EMWA)performance damping at elevated temperature due to impedance mismatching induced by increased conduction loss.Consequently,the development of high-performance EMWA materials with good impedance matching and strong loss ability in wide temperature spectrum has emerged as a top priority.Herein,due to the high melting point,good electrical conductivity,excellent environmental stability,EM coupling effect,and abundant interfaces of titanium nitride(TiN)nanotubes,they were designed based on the controlling kinetic diffusion procedure and Ostwald ripening process.Benefiting from boosted heterogeneous interfaces between TiN nanotubes and polydimethylsiloxane(PDMS),enhanced polarization loss relaxations were created,which could not only improve the depletion efficiency of EMWA,but also contribute to the optimized impedance matching at elevated temperature.Therefore,the TiN nanotubes/PDMS composite showed excellent EMWA performances at varied temperature(298-573 K),while achieved an effective absorption bandwidth(EAB)value of 3.23 GHz and a minimum reflection loss(RLmin)value of−44.15 dB at 423 K.This study not only clarifies the relationship between dielectric loss capacity(conduction loss and polarization loss)and temperature,but also breaks new ground for EM absorbers in wide temperature spectrum based on interface engineering.

INTERFACE BEHAVIOR AND DECAY RATES OF COMPRESSIBLE NAVIER-STOKES SYSTEM WITH DENSITY-DEPENDENT VISCOSITY AND A VACUUM

In this paper,we study the one-dimensional motion of viscous gas near a vacuum,with the gas connecting to a vacuum state with a jump in density.The interface behavior,the pointwise decay rates of the density function and the expanding rates of the interface are obtained with the viscosity coefficientμ(ρ)=ρ^(α)for any 0<α<1;this includes the timeweighted boundedness from below and above.The smoothness of the solution is discussed.Moreover,we construct a class of self-similar classical solutions which exhibit some interesting properties,such as optimal estimates.The present paper extends the results in[Luo T,Xin Z P,Yang T.SIAM J Math Anal,2000,31(6):1175-1191]to the jump boundary conditions case with density-dependent viscosity.

Mg/MgO interfaces as efficient hydrogen evolution cathodes causing accelerated corrosion of additive manufactured Mg alloys:A DFT analysis

The corrosion rates of additive-manufactured Mg alloys are higher than their as-cast counterparts,possibly due to increased kinetics for the hydrogen evolution reaction on secondary phases,which may include oxide inclusions.Scanning Kelvin Probe Force Microscopy demonstrated that MgO inclusions could act as cathodes for Mg corrosion,but their low conductivity likely precludes this.However,the density of state calculations through density functional theory using hybrid HSE06 functional revealed overlapping electronic states at the Mg/MgO interface,which facilitates electron transfers and participates in redox reactions.Subsequent determination of the hydrogen absorption energy at the Mg/MgO interface reveals it to be an excellent catalytic site,with HER being found to be a factor of 23x more efficient at the interface than on metallic Mg.The results not only support the plausibility of the Mg/MgO interface being an effective cathode to the adjacent anodic Mg matrix during corrosion but also contribute to the understanding of the enhanced cathodic activities observed during the anodic dissolution of magnesium.

A Review of Contact Electrification at Diversified Interfaces and Related Applications on Triboelectric Nanogenerator

The triboelectric nanogenerator(TENG)can effectively collect energy based on contact electrification(CE)at diverse interfaces,including solid–solid,liquid–solid,liquid–liquid,gas–solid,and gas–liquid.This enables energy harvesting from sources such as water,wind,and sound.In this review,we provide an overview of the coexistence of electron and ion transfer in the CE process.We elucidate the diverse dominant mechanisms observed at different interfaces and emphasize the interconnectedness and complementary nature of interface studies.The review also offers a comprehensive summary of the factors influencing charge transfer and the advancements in interfacial modification techniques.Additionally,we highlight the wide range of applications stemming from the distinctive characteristics of charge transfer at various interfaces.Finally,this review elucidates the future opportunities and challenges that interface CE may encounter.We anticipate that this review can offer valuable insights for future research on interface CE and facilitate the continued development and industrialization of TENG.

Efficient Electromagnetic Wave Absorption and Thermal Infrared Stealth in PVTMS@MWCNT Nano‑Aerogel via Abundant Nano‑Sized Cavities and Attenuation Interfaces

Pre-polymerized vinyl trimethoxy silane(PVTMS)@MWCNT nano-aerogel system was constructed via radical polymerization,sol-gel transition and supercritical CO_(2)drying.The fabricated organic-inorganic hybrid PVTMS@MWCNT aerogel structure shows nano-pore size(30-40 nm),high specific surface area(559 m^(2)g^(−1)),high void fraction(91.7%)and enhanced mechanical property:(1)the nano-pore size is beneficial for efficiently blocking thermal conduction and thermal convection via Knudsen effect(beneficial for infrared(IR)stealth);(2)the heterogeneous interface was beneficial for IR reflection(beneficial for IR stealth)and MWCNT polarization loss(beneficial for electromagnetic wave(EMW)attenuation);(3)the high void fraction was beneficial for enhancing thermal insulation(beneficial for IR stealth)and EMW impedance match(beneficial for EMW attenuation).Guided by the above theoretical design strategy,PVTMS@MWCNT nano-aerogel shows superior EMW absorption property(cover all Ku-band)and thermal IR stealth property(ΔT reached 60.7℃).Followed by a facial combination of the above nano-aerogel with graphene film of high electrical conductivity,an extremely high electromagnetic interference shielding material(66.5 dB,2.06 mm thickness)with superior absorption performance of an average absorption-to-reflection(A/R)coefficient ratio of 25.4 and a low reflection bandwidth of 4.1 GHz(A/R ratio more than 10)was experimentally obtained in this work.

Unraveling the Fundamental Mechanism of Interface Conductive Network Influence on the Fast‑Charging Performance of SiO‑Based Anode for Lithium‑Ion Batteries

Progress in the fast charging of high-capacity silicon monoxide(SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion.The construction of an interface conductive network effectively addresses the aforementioned problems;however,the impact of its quality on lithium-ion transfer and structure durability is yet to be explored.Herein,the influence of an interface conductive network on ionic transport and mechanical stability under fast charging is explored for the first time.2D modeling simulation and Cryo-transmission electron microscopy precisely reveal the mitigation of interface polarization owing to a higher fraction of conductive inorganic species formation in bilayer solid electrolyte interphase is mainly responsible for a linear decrease in ionic diffusion energy barrier.Furthermore,atomic force microscopy and Raman shift exhibit substantial stress dissipation generated by a complete conductive network,which is critical to the linear reduction of electrode residual stress.This study provides insights into the rational design of optimized interface SiO-based anodes with reinforced fast-charging performance.