Impact of impregnation pressure on desulfurization performance of Zn-based sorbents supported on semi-coke

High-pressure impregnation, a new preparation method for sorbents to remove H2S from hot coal gas, is introduced in this paper. Semi-coke （SC） and ZnO is selected as the support and active component of sorbent, respectively. The sorbent preparation process includes high-pressure impregnation, filtration, ovendry and calcination. The aim of this research is to primarily study the effects of the impregnation pressure on physical properties and desulfurization ability of the sorbent. The desulfurization experiment was carried out in a fixed-bed reactor at 500 ~C and a simulated coal gas used in this work was composed of CO （33 vol%）, H2 （39 vol%）, H2S （300 ppm in volume）, and N2 （balance）. Experimental results show that the pore structure of the SC support can be improved effectively and ZnO active component can be uniformly dispersed on the support, with the small particle size of 10-500 nm. Sorbents prepared using high-pressure impregnation have better desulfurization capacity and their active components have higher utilization rate. P20-ZnSC sorbent, obtained by high-pressure impregnation at 20 atm, has the best desulfurization ability with a sulfur capacity of 7.54 g S/100g sorbent and a breakthrough time of 44 h. Its desulfurization precision and efficiency of removing H2S from the middle temperature gases can reach 〈 1 ppm and 〉99.7%, respectively, before sorbent breakthrough.

Effects of ultrasound on the desulfurization performance of hot coal gas over Zn-Mn-Cu supported on semi-coke sorbent prepared by high-pressure impregnation method

Zn-Mn-Cu/SC（U） sorbent was hydrothermally synthesized by ultrasound-assisted high-pressure impregnation method with semi-coke（SC）as support and the mixed solution of zinc nitrate,manganese nitrate and copper nitrate as active component precursors.The desulfurization performances of hot coal gas on the prepared sorbent at a mid-temperature of 500°C were tested in fixed-bed reactor.Morphology and pore structure of the prepared sorbent were also characterized by TEM,N2adsorption/desorption isotherms and XRD.For comparison,the sorbent of Zn-Mn-Cu/SC prepared by conventional high-pressure impregnation was also evaluated and characterized in order to study the effects of ultrasound treatment.Zn-Mn-Cu/SC（U） sorbent prepared by high-pressure impregnation under ultrasound-assisted condition showed a better desulfurization performance than Zn-Mn-Cu/SC.It could remove H2 S from 1000×10-6m3/m3 to 0.1×10-6m3/m3 at 500°C and maintained for 12.5 h with the sulfur capacity of 7.74%,in which both the breakthrough time and sulfur capacity were about 32% and 51% higher than those of Zn-Mn-Cu/SC sorbent.The introduction of ultrasound during high-pressure impregnation process greatly improved the morphology and pore structure of the sorbent.The ultrasonic treatment made particle size of active components smaller and made them more evenly disperse on semi-coke support,which provided more opportunities to contact with H2S in coal-based gases.However,there were no any difference in compositions and existing forms of active components on the Zn-Mn-Cu/SC and Zn-Mn-Cu/SC（U） sorbents.

Catalyst–Support Interaction in Polyaniline‑Supported Ni_(3)Fe Oxide to Boost Oxygen Evolution Activities for Rechargeable Zn‑Air Batteries

Catalyst–support interaction plays a crucial role in improving the catalytic activity of oxygen evolution reaction(OER).Here we modulate the catalyst–support interaction in polyaniline-supported Ni_(3)Fe oxide(Ni_(3)Fe oxide/PANI)with a robust hetero-interface,which significantly improves oxygen evolution activities with an overpotential of 270 mV at 10 mA cm^(-2)and specific activity of 2.08 mA cm_(ECSA)^(-2)at overpotential of 300 mV,3.84-fold that of Ni_(3)Fe oxide.It is revealed that the catalyst–support interaction between Ni_(3)Fe oxide and PANI support enhances the Ni–O covalency via the interfacial Ni–N bond,thus promoting the charge and mass transfer on Ni_(3)Fe oxide.Considering the excellent activity and stability,rechargeable Zn-air batteries with optimum Ni_(3)Fe oxide/PANI are assembled,delivering a low charge voltage of 1.95 V to cycle for 400 h at 10 mA cm^(-2).The regulation of the effect of catalyst–support interaction on catalytic activity provides new possibilities for the future design of highly efficient OER catalysts.

Investigation on activated semi-coke desulfurization

An activated semi coke with industrial scale size was prepared by high pressure hydrothermal chemistry activation, HNO 3 oxidation and calcination activation in proper order from Inner Mongolia Zhalainuoer semi coke, which is rich in resource and cheap in sale. SO 2 adsorption capacity on this activated semi coke was assessed in the fixed bed in the temperature range of 60—170℃, space velocity range of 500—1300 h -1 , SO 2 concentration of 1000—3000 ppmv, and N 2 as balance. The surface area, elemental and proximate analysis for both raw semi coke and activated semi cokes were measured. The experimental results showed that the activated semi coke has a high adsorption capacity for sulfur dioxide than the untreated semi coke. This may be the result of increase of surface area on activated semi coke and surface oxygen functional groups with basicity characteristics. Comparison to result of FTIR, it is known that group of —C—O—C? ?may be active center of SO 2 catalytic adsorption on activated semi coke.

Combustion characteristics of Daqing oil shale and oil shale semi-cokes

Thermo-gravimetric-analysis(TGA) was used to analyze the combustion characteristics of an oil shale and semi-cokes prepared from it.The effect of prior pyrolysis and TGA heating rate on the combustion process was studied.Prior pyrolysis affects the initial temperature of mass loss and the ignition temperature.The ignition temperature increases as the volatile content of the sample decreases.TG/DTG curves obtained at different heating rates show that heating rate has little effect on ignition temperature.But the peak of combustion shifts to higher temperatures as the heating rate is increased.The Coats-Redfern integration method was employed to find the combustion-reaction kinetic parameters for the burning of oil shale and oil shale semi-coke.

Effects of process parameters on pore structure of semi-coke prepared by solid heat carrier with dry distillation

The semi-coke was prepared by solid heat carrier with dry distillation in single factor method. The pore structures of raw coal and semi-coke were characterized by Brunauer-Emmett-Teller (BET) and scanning electron microscope (SEM). The results show that the adsorption and desorption isotherm of semi-coke are not coincident. There was a wide pore distribution on the semi-coke, in which mesopores and micropores account for a considerable proportion. Also there are many more secondary pores. With the increase of the final temperature of heat carrier and constant temperature, as well as the decrease of volume ratio of coal and hot carrier reactor, specific surface area and pore volume of semi-coke increased rapidly first and then decreased and finally increased, along with the rapidly reduction of average pore size. SEM photos show that the surface of semi-coke becomes increasingly rough and glossy.

Process optimization for treatment of methyltin mercaptide effluents using modified semi-coke

The central composite process optimization was performed by response surface methodology technique using a design for the treatment of methyltin mercaptide with modified semi-coke. The semi-coke from the coal industry was suitably modified by treating it with phosphoric acid, with a thermal activation process. The objective of the process optimization is to reduce the chemical oxygen demand （COD） and NH4＋-N in the methyltin mercaptide industrial effluent. The process variables considered for process optimization are the semi-coke dosage, adsorption time and effluent pH. The optimized process conditions are identified to be a semi-coke dosage of 80 g/L, adsorption time of 90 min and a pH value of 8.34. The ANOVA results indicate that the adsorbent dosage and pH are the significant parameters, while the adsorption time is insignificant, possibly owing to the large range of adsorption time chosen. The textural characteristics of modified semi-coke were analyzed using scanning electron microscopy and nitrogen adsorption isotherm. The average BET surface area of modified semi-coke is estimated to be 915 mE/g, with the average pore volume of 0.71 cm3/g and a average pore diameter of 3.09 nm, with micropore volume contributing to 52.36%.

Characterization of semi-coke generated by coal-based direct reduction process of siderite

Solid wastes derived from metallurgical industries pose a significant threat to environment. The utilization and disposal of these solid wastes are the major concern in the world. Semi-coke generated in coal-based direct reduction process of iron ore is a by-product and its suitable utilization is not available so far. In order to handle it properly, the characteristics of this by-product were comprehensively investigated. A series of analysis methods were used to demonstrate its mineral compositions, petrography and physico-chemical properties. The results reveal that the semi-coke has poor washability. The fixed carbon content of semi-coke reaches 76.11% and the gross calorific value is 28.10 MJ/kg, both of which are similar to those of traditional sinter coke breeze. Also, semi-coke ash possesses lower content of SiO2, Al2O3, S and higher content of CaO and MgO, which could improve the strength of sinter ore when partially substituting for coke breeze in sintering. Semi-coke features well-development porous structure and higher reaction activity, which predicts that the sintering speed could be elevated to some extent when employing it as a partial replacement of coke breeze, so the studies further suggest that the potential adverse effect of the high reactivity on sintering process could be weakened by adequately coarsening the semi-coke's particle size.

Dysfunctional attitudes,social support,negative life events,and depressive symptoms in Chinese adolescents:A moderated mediation model

BACKGROUND Depression is a prevalent psychological issue in adolescents that is significantly related to negative life events(NLEs)and dysfunctional attitudes.High levels of social support can significantly buffer NLEs’effect on depression.Currently,there is limited research on how social support moderates the relationship between NLEs,dysfunctional attitudes,and depression in adolescents in China.It is imperative to investigate this moderating effect to mitigate dysfunctional attitudes in adolescent undergoing depressive mood,ultimately enhancing their overall mental health.AIM To investigate the relationship and underlying mechanisms between specific dysfunctional attitudes,social support,and depression among Chinese adolescents.METHODS This is a cross-sectional study which selected five middle schools in Shandong Province for investigation in March 2022.Participants included 795 adolescents(49.87%male,mage=15.15,SD=1.84,age range=11-18 years old).All participants completed the Dysfunctional Attitude Scale,Adolescent Life Event Scale,Beck Depression Inventory,and Social Support Rating Scale.A moderated mediation model was conducted to examine the relationship between specific dysfunctional attitudes,social support,and depression.RESULTS Results indicated that NLEs affected depression through the mediating role of specific dysfunctional attitudes(autonomy attitudesβ=0.21;perfectionismβ=0.25).Moreover,social support was found to moderate the mediating effect between NLEs,specific dysfunctional attitudes,and depressive symptoms(autonomy attitudes b2=-0.08;perfectionism b2=-0.09).CONCLUSION Dysfunctional attitudes mediated and social support moderated the relationship between NLEs and depression.Social support can buffer depression symptoms among adolescents with autonomy attitudes and perfectionism.

Mechanism of high-preload support based on the NPR anchor cable in layered soft rock tunnels

The control of large deformation problems in layered soft rock tunnels needs to solve urgently.The roof problem is particularly severe among the deformation issues in tunnels.This study first analyzes the asymmetric deformation modes in layered soft rock tunnels with large deformations.Subsequently,we construct a mechanical model under ideal conditions for controlling the roof of layered soft rock tunnels through high preload with the support of NPR anchor cables.The prominent roles of long and short NPR anchor cables in the support system are also analyzed.The results indicate the significance of high preload in controlling the roof of layered soft rock tunnels.The short NPR anchor cables effectively improve the integrity of the stratified soft rock layers,while the long NPR anchor cables effectively mobilize the self-bearing capacity of deep-stable rock layers.Finally,the high-preload support method with NPR anchor cables is validated to have a good effect on controlling large deformations in layered soft rock tunnels through field monitoring data.

Analysis of the interaction between bolt-reinforced rock and surface support in tunnels based on convergence-confinement method

To investigate the interaction of the bolt-reinforced rock and the surface support,an analytical model of the convergence-confinement type is proposed,considering the sequential installation of the fully grouted rockbolts and the surface support.The rock mass is assumed to be elastic-brittle-plastic material,obeying the linear Mohr-Coulomb criterion or the non-linear Hoek-Brown criterion.According to the strain states of the tunnel wall at bolt and surface support installation and the relative magnitude between the bolt length and the plastic depth during the whole process,six cases are categorized upon solving the problem.Each case is divided into three stages due to the different effects of the active rockbolts and the passive surface support.The fictitious pressure is introduced to quantify the threedimensional(3D)effect of the tunnel face,and thus,the actual physical location along the tunnel axis of the analytical section can be considered.By using the bolt-rock strain compatibility and the rocksurface support displacement compatibility conditions,the solutions of longitudinal tunnel displacement and the reaction pressure of surface support along the tunnel axis are obtained.The proposed analytical solutions are validated by a series of 3D numerical simulations.Extensive parametric studies are conducted to examine the effect of the typical parameters of rockbolts and surface support on the tunnel displacement and the reaction pressure of the surface support under different rock conditions.The results show that the rockbolts are more effective in controlling the tunnel displacement than the surface support,which should be installed as soon as possible with a suitable length.For tunnels excavated in weak rocks or with restricted displacement control requirements,the surface support should also be installed or closed timely with a certain stiffness.The proposed method provides a convenient alternative approach for the optimization of rockbolts and surface support at the preliminary stage of tunnel design.

Stability analysis of longwall top-coal caving face in extra-thick coal seams based on an innovative numerical hydraulic support model

The relationship between support and surrounding rock is of great significance to the control of surrounding rock in mining process.In view of the fact that most of the existing numerical simulation methods construct virtual elements and stress servo control to approximately replace the hydraulic support problem,this paper establishes a new numerical model of hydraulic support with the same working characteristics as the actual hydraulic support by integrating numerical simulation software Rhino,Griddle and FLAC3D,which can realize the simulation of different working conditions.Based on this model,the influence mechanism of the supporting strength of hydraulic support on surrounding rock stress regulation and coal stability in front of the top coal caving face in extra thick coal seam were researched.Firstly,under different support intensity,the abutment pressure of the bearing coal and the coal in front of it presents the “three-stage”evolution characteristics.The influence range of support intensity is 15%–30%.Secondly,1.5 MPa is the upper limit of impact that the support strength can have on the front coal failure area.Thirdly,within a displacement range of 2.76 m from the coal wall,a support strength of1.5 MPa provides optimal control of the horizontal displacement of the coal.

Translocation of telomerase reverse transcriptase coincided with ATP release in postnatal cochlear supporting cells

The spontaneous bursts of electrical activity in the developing auditory system are derived from the periodic release of adenosine triphosphate(ATP)by supporting cells in the Kölliker’s organ.However,the mechanisms responsible for initiating spontaneous ATP release have not been determined.Our previous study revealed that telomerase reverse transcriptase(TERT)is expressed in the basilar membrane during the first postnatal week.Its role in cochlear development remains unclear.In this study,we investigated the expression and role of TERT in postnatal cochlea supporting cells.Our results revealed that in postnatal cochlear Kölliker’s organ supporting cells,TERT shifts from the nucleus into the cytoplasm over time.We found that the TERT translocation tendency in postnatal cochlear supporting cells in vitro coincided with that observed in vivo.Further analysis showed that TERT in the cytoplasm was mainly located in mitochondria in the absence of oxidative stress or apoptosis,suggesting that TERT in mitochondria plays roles other than antioxidant or anti-apoptotic functions.We observed increased ATP synthesis,release and activation of purine signaling systems in supporting cells during the first 10 postnatal days.The phenomenon that TERT translocation coincided with changes in ATP synthesis,release and activation of the purine signaling system in postnatal cochlear supporting cells suggested that TERT may be involved in regulating ATP release and activation of the purine signaling system.Our study provides a new research direction for exploring the spontaneous electrical activity of the cochlea during the early postnatal period.

Roles of supporting cells in the maintenance and regeneration of the damaged inner ear:A literature review

The inner ear sensory epithelium consists of two major types of cells:hair cells(HCs)and supporting cells(SCs).Critical functions of HCs in the perception of mechanical stimulation and mechanosensory transduction have long been elucidated.SCs are indispensable components of the sensory epithelia,and they maintain the structural integrity and ionic environment of the inner ear.Once delicate inner ear epithelia sustain injuries(for example,due to ototoxic drugs or noise exposure),SCs respond immediately to serve as repairers of the epithelium and as adapters to become HC progenitors,aiming at morphological and functional recovery of the inner ear.This regenerative process is extensive in non-mammals,but is limited in the mammalian inner ear,especially in the mature cochlea.This review aimed to discuss the important roles of SCs in the repair of the mammalian inner ear.

Correlation Analysis between Self-Disclosure and Social Support in Patients with Breast Cancer

Objective: Describe the status quo of self-disclosure and social support in breast cancer patients and analyze the correlation between them. Methods: General data questionnaire, distress disclosure Index scale and Chinese version of medical social support scale were used to investigate the correlation between self-disclosure and social support in breast cancer patients by Pearson correlation analysis. Results: 1) The total self-disclosure score was (38.75 ± 9.18);the total score of social support was (70.57 ± 14.04) scores, including emotional information support dimension (28.39 ± 6.06) scores, practical support dimension (15.62 ± 3.31) scores, elastic support dimension (14.85 ± 3.23) scores, and emotional support dimension (11.70 ± 2.56) scores. 2) Self-disclosure was positively correlated with social support (r = 0.433, p Conclusion: Breast cancer patients had a moderate level of self-disclosure, and the higher the level of self-disclosure, the better the social support. It is suggested that improving the self-disclosure level of breast cancer patients can help them obtain more social support.

Cost-effective bifunctional lignin-derived carbon supported tin oxide with efficient production of 5-hydroxymethylfurfural from glucose

5-Hydroxymethylfurfural(5-HMF)is one of the important bio-based platform compounds,and the catalytic conversion of glucose to 5-HMF is a highly desirable approach that is receiving increasing attention.Herein,we reported the synthesis of lignin-derived carbon supported tin oxides(SnOx/LC)catalyst via a two-step hydrothermal-pyrolytic method using wheat straw alkali lignin as a cost-effective carbon source with high carbon content.The key preparation conditions of the catalyst and its catalytic conditions for the conversion of glucose to 5-HMF were investigated,respectively.Results show that under the preparation conditions of tin tetrachloride dosage of 3.0 mmol and pyrolysis temperature of 500 ℃,the optimized catalyst(3.0-SnOx/LC-500)with a high yield of 63.4%exhibits good catalytic performance of 5-HMF yield of 50.1%and reaction selectivity of 86.0%under the optimum conditions of reaction temperature and time of 190 ℃ and 3 h,initial glucose concentration of 10%(mass),3.0-SnOx/LC-500 dosage of 100 mg in a biphasic solvent system of volume ratio of water to tetrahydrofuran of 1:4.In addition,3.0-SnOx/LC-500 exerts an excellent reusability in a five-cycle experiment.Furthermore,SnOx/LC was characterized in detail using X-ray diffraction patterns(XRD),X-ray photoelectron spectroscopy(XPS),Brunauer-Emmett-Teller(BET),ammonia temperature-programmed-desorption(NH3-TPD),pyridine adsorption infrared spectroscopy(Py-FTIR),scanning electron microscope(SEM)and thermal gravimetric analysis(TGA).Results indicate that Brønsted acid sites and Lewis acid sites coexist on 3.0-SnOx/LC-500,and more Sn^(4+),as well as a proper ratio of weak acidity to medium acidity,are conductive to its catalytic performance in glucose-to-5-HMF reaction.

Perspectives and Challenges of Family Members in Providing Mental Support to Cancer Patients:A Qualitative Study in Beijing,China

This study explores the perspectives and challenges faced by family members providing mental support to cancer patients in Beijing,China.The primary objective is to understand the emotional and practical roles family members undertake and the difficulties they encounter.Utilizing a qualitative research design,data were collected through semi-structured interviews with family caregivers of cancer patients.Thematic analysis revealed several key themes:the dual burden of emotional support and caregiving responsibilities,the impact on daily life and personal well-being,the role and effectiveness of external support systems,perceptions of medical staff support,and the common challenges and conflicts faced in caregiving.The findings highlight the critical need for comprehensive support systems that address both the emotional and practical needs of family caregivers.Recommendations for enhancing family-centered support programs in oncology settings are discussed.

Aqueous-phase reforming of hydroxyacetone solution to bio-based H_(2)over supported Pt catalysts

Aqueous-phase reforming(APR)is an attractive process to produce bio-based hydrogen from waste biomass streams,during which the catalyst stability is often challenged due to the harsh reaction conditions.In this work,three Pt-based catalysts supported on C,AlO(OH),and ZrO_(2)were investigated for the APR of hydroxyacetone solution in afixed bed reactor at 225℃and 35 bar.Among them,the Pt/C catalyst showed the highest turnover frequency for H_(2)production(TOF of 8.9 molH_(2)molPt^(-1)min^(-1))and the longest catalyst stability.Over the AlO(OH)and ZrO_(2)supported Pt catalysts,the side reactions consuming H_(2),formation of coke,and Pt sintering result in a low H_(2)production and the fast catalyst deactivation.The proposed reaction pathways suggest that a promising APR catalyst should reform all oxygenates in the aqueous phase,minimize the hydrogenation of the oxygenates,maximize the WGS reaction,and inhibit the condensation and coking reactions for maximizing the hydrogen yield and a stable catalytic performance.

Critical role of carbon support in metal nanoaggregate facilitating Fe-N-C catalyst for PEM fuel cell application

Metal nanoaggregates can simultaneously enhance the activity and stability of Fe-N-C catalysts in proton-exchange-membrane fuel cells(PEMFC).Previous studies on the relevant mechanism have focused on the direct interaction between FeN_(4)active sites and metal nanoaggregates.However,the role of carbon support that hosts metal nanoaggregates and active sites has been overlooked.Here,a Fe-N-C catalyst encapsulating inactive gold nanoparticles is prepared as a model catalyst to investigate the electronic tuning of Au nanoparticles(NPs)towards the carbon support.Au NPs donate electrons to carbon support,making it rich inπelectrons,which reduces the work function and regulates the electronic configuration of the FeN_(4)sites for an enhanced ORR activity.Meanwhile,the electron-rich carbon support can mitigate the electron depletion of FeN_(4)sites caused by carbon support oxidation,thereby preserving its high activity.The yield and accumulation of H_(2)O_(2)are thus alleviated,which delays the oxidation of the catalyst and benefits the stability.Due to the electron-rich carbon support,the composite catalyst achieves a top-level peak power density of 0.74 W/cm^(2) in a 1.5 bar H_(2)-air PEMFC,as well as the improved stability.This work elucidates the key role of carbon support in the performance enhancement of the FeN-C/metal nanoaggregate composite catalysts for fuel cell application.

Research on the flow stability and noise reduction characteristics of quasi-periodic elastic support skin

To enhance flow stability and reduce hydrodynamic noise caused by fluctuating pressure,a quasiperiodic elastic support skin composed of flexible walls and elastic support elements is proposed for fluid noise reduction.The arrangement of the elastic support element is determined by the equivalent periodic distance and quasi-periodic coefficient.In this paper,a dynamic model of skin in a fluid environment is established.The influence of equivalent periodic distance and quasi-periodic coefficient on flow stability is investigated.The results suggest that arranging the elastic support elements in accordance with the quasi-periodic law can effectively enhance flow stability.Meanwhile,the hydrodynamic noise calculation results demonstrate that the skin exhibits excellent noise reduction performance,with reductions of 10 dB in the streamwise direction,11 dB in the spanwise direction,and 10 dB in the normal direction.The results also demonstrate that the stability analysis method can serve as a diagnostic tool for flow fields and guide the design of noise reduction structures.