INFLUENCE OF Pr_6O_(11) ON THE GAS SENSING CHARACTERISTICS OF SnO_2 SEMICONDUCTOR

This paper is to discuss the sensing characteristics of SnO_2 semiconductor components in which Pr_6O_(11) is added.When experimenting under 11 gases of CH_3COCH_3,C_2H_5OH.C_6H_5CH_3,H_2,NH_3,CO, CO_2 CH_4,C_4H_10,n—C_6H_(14)and n—C_7H_(16),we find that the components have selectivity to CH_3COCH_3, C_2H_5OH and that the ideal amount of Pr_6O_(11) in the components is about I.Owt%.The experiments also show that with the increase of the amount of Pr_6O_(11),the ideal working temperature,the response and restoration time decrease.

Sensing characteristics of a metal film coated long-period fiber grating

To obtain the influence rules of the coating parameters of a long-period fiber grating(LPFG)with respect to temperature,strain and refractive index sensing properties,based on the mode coupling theory,a strict four-layer theorietical model of a metal film coated LPFG is established,and these parameters that affect the spectral characteristics of the metal film coated LPFG are studied.The simulation results show that there is an optimal metal film thickness on the surface of the LPFG that will induce the surface-plasmon resonance(SP R)effect,which results in higher sensitivity to the environmental temperature and refractive index but has little influence on the strain There is theoretical evidence that when the silver thickness is between0.8and1.2nm,the refractive index sensitivity will reach the peak point of42.4026,at which the refractive index sensor sensitivity is increased by4.S%.The theoretical results of coating a long-period fiber grating provide a good theoretical basis and guidance for LPFG design and parameters optimization

Fabrication and Mechano-sensing Characteristics of Bending Polypyrrole Actuator

To prepare a conductive polymer actuator with decent performance,a self-built experimental platform for the preparation of polypyrrole film is employed.One of the essential goals is to examine the mechanical characteristics of the actuator in the presence of various combinations of process parameters,combined with the orthogonal test method of"four factors and three levels".The bending and sensing characteristics of actuators of various sizes are methodically examined using a self-made bending polypyrrole actuator.The functional relationship between the bending displacement and the output voltage signal is established by studying the characteristics of the actuator sensor subjected to various degrees of bending.The experimental results reveal that the bending displacement of the actuator tip almost exhibits a linear variation as a function of length and width.When the voltage reaches 0.8 V,the bending speed of the actuator tends to be stable.Finally,the mechanical properties of the self-assembled polypyrrole actuator are verified by the design and fabrication of the microgripper.

Fabrication and sensing characteristics of intrinsic Fabry–Perot interferometers in fiber tapers

This Letter presents intrinsic Fabry–Perot interferometers in the fiber tapers fabricated by the femtosecond laser micromachining technique. The sensing of temperatures as high as 1000°C based on the fiber device is characterized, with a sensitivity of 15.28 pm∕°C. A nearly linear refractive index sensing is also obtained by using the fringe visibility to characterize, with a sensitivity of 73.05 dB∕RIU. These intrinsic Fabry–Perot interferometers in fiber tapers may be useful in applications of high-temperature and linear refractive index sensing.

Characteristics of suspended planar-type gas sensor based on MEMS process

In order to simplify the fabrication process,distribute the temperature uniformly and reduce the power consumption of the micro-hotplate（MHP） gas sensor,a planar-type gas sensor based on SnO2 thin film with suspended structure is designed through a MEMS process.Steady-state thermal analysis of the gas sensor and the closed membrane type sensor where the membrane overlaps the Si substrate is carried out with the finite element model,and it is shown that the suspended planar-type gas sensor has a more homogeneous temperature distribution and a lower power consumption.When the maximum temperature on the sensor reaches 383℃,the power consumption is only 7 mW,and the temperature gradient across the thin film is less than 14℃.To overcome the fragility of the suspended beams,a novel fabrication process in which the deposition of the gas sensing film occurs prior to the formation of suspended beams is proposed.The back side of the Si substrate is etched through deep reactive ion etching（DRIE） to avoid chemical pollution of the front side.The fabrication steps in which only four masks are used for the photolithography are described in detail.The Fe doped SnO2 thin film synthesized by sol-gel spin-coating is used as the gas sensing element.The device is tested on hydrogen and exhibits satisfactory sensing performance.The sensitivity increases with the rise of the concentration from 50×10-6 to 2000×10-6,and reaches about 30 at 2000×10-6.

Field Sensing Characteristic Research of Carbon Fiber Smart Material

In order to research the field sensing characteristic of the carbon fiber smart material, the Tikhonov regularization principle and the modified Newton-Raphson(MNR) algorithm were adopted to solve the inverse problem of the electrical resistance tomography(ERT). An ERT system of carbon fiber smart material was developed. Field sensing characteristic was researched with the experiment. The experimental results show that the specific resistance distribution of carbon fiber smart material is highly consistent with the distribution of structural strain. High resistance zone responds to high strain area, and the specific resistance distribution of carbon fiber smart material reflects the distribution of sample strain in covering area. Monitoring by carbon fiber smart material on complicated strain status in sample field domain is realized through theoretical and experimental study.

Remote Sensing Study of Gold Biogeochemical Effects in the Western Guangdong-Hainan Region——A Case Study of the Hetai Gold Deposit

The vegetation has been poisoned by gold in the western Guangdong-Hainan region. The gold content ofthe leaves there is as high as 10-1961 times the abundance, the chlorophyll content is 10%-30% lower thanthat of the vegetation in metamorphic terrains and 10%-20% higher than that in granite terrains, and thecarotenoid content is 10%-44% lower than the background value. The water content of leaves is 10% to 20%lower than the background value. The cells of leaves are deformed and broken. The leaf surface shows colourspots and becomes yellow or dark green. The spectral reflectance of the leaf surface is 5%-30% higher than thebackground value: the spectral shape has shifted 5-15 nm to the short wavelength. The gray scales of eanopyon images of Landsat TM and airborne imaging scanner (AIS) are 10%-100% higher than the backgroundvalues. On Landsat TM and AIS false colour images, plants poisoned by gold display a yellow color, whichdisinguishes them from background plants. According to the spectral and image features of goldbiogeochemical effects, the author has constructed a gold information system and expert prediction system,and thus two gold target areas and two gold prospect areas have been identified rapidly, economically andaccurately in the western Guangdong-Hainan region which is extensively covered by vegetation.

Study on Porous Silicon with P-N Junction Sensor for Humidity Measurement

Porous materials used for humidity sensing have been commercialized.In this paper,the preparation and humidity sensing characteristics of porous silicon with P-N junctions (PNJPS)are studied.PNJPS is made by electro-chemical anodic etched method from silicon wafers with P-N junctions.Its porous structure is verified by scanning electronic micrograph. Experiments also show that PNJPS has high sensitivity,short response time (less than 30 seconds),and long-term stability.

Fog Research in China:An Overview

Fog can adversely affect human activity directly and indirectly, resulting in large losses both in terms of the local economy and lives. Much effort has been devoted to studies of fog across many areas of China, and in that context this paper aims to summarize climatic characteristics and review fog field experiments and their major results relating to fog mechanisms, physical properties and chemical characteristics. Progress in the application of remote sensing techniques and numerical simulation in fog research are also discussed. In particular, the effects of urbanization and industrialization on fog are highlighted. To end, perspectives on future fog research are outlined. The goal of this review paper is to introduce fog research in China to the global academic community and thus promote international collaboration on fog research. This is important because most papers on fog in China are published in Chinese, which are unreadable for the vast majority of non-Chinese researchers.