With the principles of microwave circuits and semiconductor device physics, two microwave power device test circuits combined with a test fixture are designed and simulated, whose properties are evaluated by a paramet...With the principles of microwave circuits and semiconductor device physics, two microwave power device test circuits combined with a test fixture are designed and simulated, whose properties are evaluated by a parameter network analyzer within the frequency range from 3 to 8GHz. The simulation and experimental results verify that the test circuit with a radial stub is better than that without. As an example, a C-band AlGaN/GaN HEMT microwave power device is tested with the designed circuit and fixture. With a 5.4GHz microwave input signal,the maximum gain is 8.75dB,and the maximum output power is 33.2dBm.展开更多
In the Ion Cyclotron Range of Frequency (ICRF) heating experiment, impedance matching is of great practical significance, because wide variations in antenna loading are observed within the discharge, in tokamaks opera...In the Ion Cyclotron Range of Frequency (ICRF) heating experiment, impedance matching is of great practical significance, because wide variations in antenna loading are observed within the discharge, in tokamaks operating in H-mode. A sudden decrease in antenna loading accompanying the L-mode to H-mode transition typically occurs on a timescale of a few milliseconds, as does the increase in loading at the H- to L-mode transition. Therefore, it is necessary to match dynamically in the transmission line between the generator output and the antenna input connections[1]. A new type of stub tuner being developed utilizes the difference in radio-frequency wavelengths between gas and liquid due to different relative dielectric constants. The impedance matching can be adjusted in realtime in an attempt to track the variations in the antenna loading. Since there are no mechanically moving parts in the short ends of stub, the change can be more convenient and safe, moreover, it can withstand higher voltage without breakdown. This system device will be applied in the HT-7 superconductor Tokamak ICRF experiment.展开更多
This paper studies the contribution of CFRP(carbon fiber-reinforced polymer)to the mechanical behavior of high strength concrete-filled square steel tube(HCFST)under biaxial eccentric compression.The new type of compo...This paper studies the contribution of CFRP(carbon fiber-reinforced polymer)to the mechanical behavior of high strength concrete-filled square steel tube(HCFST)under biaxial eccentric compression.The new type of composite member is composed of an inner CFRP tube and an outer steel tube with concrete filled in the two tubes.The finite element analysis was made by ABAQUS on the behavior of high strength concrete filled square steel tubular columns with inner CFRP circular tube subjected to bi-axial eccentric loading.The results obtained from the finite element analysis were verified with the experimental results.In addition,the load-deflection curves in the whole process were calculated and analyzed,which can be divided into three segments:Elastic phase,plastic phase,descending phase.Based on the load-deflection curves,the stresses analysis on the core concrete,CFRP tube and steel tube were conducted.The confinement effect of the CFRP tube improves the ductility of HCFST-CFRP stub column.CFRP ratio and eccentricity affect the ultimate bearing capacity of HCFST stub column.Finally,a calculation formula of ultimate bearing capacity was proposed in the paper.展开更多
In order to construct and maintain stability Connected Dominating Set over MANET in Ubiquitous Stub Network, this paper proposes a novel area-based CDS construction and maintenance algorithm. The algorithm is divided ...In order to construct and maintain stability Connected Dominating Set over MANET in Ubiquitous Stub Network, this paper proposes a novel area-based CDS construction and maintenance algorithm. The algorithm is divided into three phases: 1) Area Partition; 2) Area Expansion; 3) Area Connection. In additional, maintenance strategy is proposed in each phase respectively to handle node mobility with timer. At last, the simulation is implemented with OPNET and MATLAB and the results are analyzed in detailed with Size of CDS, Message Overhead and other indexes.展开更多
In microwave circuit and aerial system, impedance matching is very important. Liquid stub tuner is a new type of impedance matching device. In the HT-7 Tokamak Ion Cyclotron Resonance Heating ( ICRH ) system, we have ...In microwave circuit and aerial system, impedance matching is very important. Liquid stub tuner is a new type of impedance matching device. In the HT-7 Tokamak Ion Cyclotron Resonance Heating ( ICRH ) system, we have already adopted liquid stub tuner to replace the conventional stub tuner. It is urgent to develop a control system of the liquid stub tuner. This paper mainly introduces the design and realization of the liquid stub tuner control system , and briefly introduces its three controlling functions: local control, remote control and computer control.展开更多
To realize equal power splitting at two arbitrary gigahertz-frequencies, this paper presents a new type of Wilkinson dual frequency power divider, consisting of three-section transmission lines and a series RLC(resist...To realize equal power splitting at two arbitrary gigahertz-frequencies, this paper presents a new type of Wilkinson dual frequency power divider, consisting of three-section transmission lines and a series RLC(resistor, inductor and capacitor)circuit. By equating the [ABCD] matrix of the proposed circuit to that of the quarter-wave impedance transformer, coupled with even/odd mode analyses, the design equations of the proposed network are derived. For verification, two dual-frequency power dividers with dual-band operating frequencies at 0.6 GHz and 3.0 GHz, and 3.8 GHz and 10 GHz respectively are designed and simulated. Simulation results show that the dual-band ratio of the proposed power divider can be as large as 5. Comparisons of the simulation results at X-band and S-band with different power dividers indicate that the proposed dual-band power divider performs better under the scenario of the upper operating frequency extending to X-band.展开更多
The paper studies photon-associated transmission through a quantum wire with a side-coupled stub tuner, to which an external microwave field applies, in terms of the approach developed by Cai. The inelastic scattering...The paper studies photon-associated transmission through a quantum wire with a side-coupled stub tuner, to which an external microwave field applies, in terms of the approach developed by Cai. The inelastic scattering of an incoming electron and the photon field lead to photon-electronic transmission though quantum wire. It is found that single photon absorbing (emitting) of the incoming electron in the stub can bring about antiresonant transmission in the quantum wire. The influence of the feedback mechanism from inelastic scattering process on elastic channel transmission is also examined. Total transmission coefficient as a function of photon energy exhibits non-periodic oscillation peaks. With the increasing of photon-electron coupling constant, the amplitude of these oscillation peaks enhances. Key words stub tuner - photon-associated transport - antiresonance PASC 2001 N72.25 Dc - 73.40.Ty - 73.23. Ad展开更多
文摘With the principles of microwave circuits and semiconductor device physics, two microwave power device test circuits combined with a test fixture are designed and simulated, whose properties are evaluated by a parameter network analyzer within the frequency range from 3 to 8GHz. The simulation and experimental results verify that the test circuit with a radial stub is better than that without. As an example, a C-band AlGaN/GaN HEMT microwave power device is tested with the designed circuit and fixture. With a 5.4GHz microwave input signal,the maximum gain is 8.75dB,and the maximum output power is 33.2dBm.
基金Supported by National Natural Science Foundation of China,11447118,11247032,11365011Youth Science Foundation of Science and Technology Department of Jiangxi Province,20151BAB212004,20151BAB212012~~
文摘In the Ion Cyclotron Range of Frequency (ICRF) heating experiment, impedance matching is of great practical significance, because wide variations in antenna loading are observed within the discharge, in tokamaks operating in H-mode. A sudden decrease in antenna loading accompanying the L-mode to H-mode transition typically occurs on a timescale of a few milliseconds, as does the increase in loading at the H- to L-mode transition. Therefore, it is necessary to match dynamically in the transmission line between the generator output and the antenna input connections[1]. A new type of stub tuner being developed utilizes the difference in radio-frequency wavelengths between gas and liquid due to different relative dielectric constants. The impedance matching can be adjusted in realtime in an attempt to track the variations in the antenna loading. Since there are no mechanically moving parts in the short ends of stub, the change can be more convenient and safe, moreover, it can withstand higher voltage without breakdown. This system device will be applied in the HT-7 superconductor Tokamak ICRF experiment.
基金This research was funded by Key Projects of National Natural Science Foundation of China(51938009)National Natural Science Foundation of China(51878419)and(51808353).
文摘This paper studies the contribution of CFRP(carbon fiber-reinforced polymer)to the mechanical behavior of high strength concrete-filled square steel tube(HCFST)under biaxial eccentric compression.The new type of composite member is composed of an inner CFRP tube and an outer steel tube with concrete filled in the two tubes.The finite element analysis was made by ABAQUS on the behavior of high strength concrete filled square steel tubular columns with inner CFRP circular tube subjected to bi-axial eccentric loading.The results obtained from the finite element analysis were verified with the experimental results.In addition,the load-deflection curves in the whole process were calculated and analyzed,which can be divided into three segments:Elastic phase,plastic phase,descending phase.Based on the load-deflection curves,the stresses analysis on the core concrete,CFRP tube and steel tube were conducted.The confinement effect of the CFRP tube improves the ductility of HCFST-CFRP stub column.CFRP ratio and eccentricity affect the ultimate bearing capacity of HCFST stub column.Finally,a calculation formula of ultimate bearing capacity was proposed in the paper.
基金supported by the National Science and Technology Support Program of China (2015BAG10B01)the Science and Technology Project of State Grid Corporation of China (SGIT0000KJJS1500008)
文摘In order to construct and maintain stability Connected Dominating Set over MANET in Ubiquitous Stub Network, this paper proposes a novel area-based CDS construction and maintenance algorithm. The algorithm is divided into three phases: 1) Area Partition; 2) Area Expansion; 3) Area Connection. In additional, maintenance strategy is proposed in each phase respectively to handle node mobility with timer. At last, the simulation is implemented with OPNET and MATLAB and the results are analyzed in detailed with Size of CDS, Message Overhead and other indexes.
文摘In microwave circuit and aerial system, impedance matching is very important. Liquid stub tuner is a new type of impedance matching device. In the HT-7 Tokamak Ion Cyclotron Resonance Heating ( ICRH ) system, we have already adopted liquid stub tuner to replace the conventional stub tuner. It is urgent to develop a control system of the liquid stub tuner. This paper mainly introduces the design and realization of the liquid stub tuner control system , and briefly introduces its three controlling functions: local control, remote control and computer control.
文摘To realize equal power splitting at two arbitrary gigahertz-frequencies, this paper presents a new type of Wilkinson dual frequency power divider, consisting of three-section transmission lines and a series RLC(resistor, inductor and capacitor)circuit. By equating the [ABCD] matrix of the proposed circuit to that of the quarter-wave impedance transformer, coupled with even/odd mode analyses, the design equations of the proposed network are derived. For verification, two dual-frequency power dividers with dual-band operating frequencies at 0.6 GHz and 3.0 GHz, and 3.8 GHz and 10 GHz respectively are designed and simulated. Simulation results show that the dual-band ratio of the proposed power divider can be as large as 5. Comparisons of the simulation results at X-band and S-band with different power dividers indicate that the proposed dual-band power divider performs better under the scenario of the upper operating frequency extending to X-band.
文摘The paper studies photon-associated transmission through a quantum wire with a side-coupled stub tuner, to which an external microwave field applies, in terms of the approach developed by Cai. The inelastic scattering of an incoming electron and the photon field lead to photon-electronic transmission though quantum wire. It is found that single photon absorbing (emitting) of the incoming electron in the stub can bring about antiresonant transmission in the quantum wire. The influence of the feedback mechanism from inelastic scattering process on elastic channel transmission is also examined. Total transmission coefficient as a function of photon energy exhibits non-periodic oscillation peaks. With the increasing of photon-electron coupling constant, the amplitude of these oscillation peaks enhances. Key words stub tuner - photon-associated transport - antiresonance PASC 2001 N72.25 Dc - 73.40.Ty - 73.23. Ad
