In accordance with the relative movement between end-milling cutter and workpiece surface, a theoretical generation model for milled surface was established with the movement error of principal axle considered. Then t...In accordance with the relative movement between end-milling cutter and workpiece surface, a theoretical generation model for milled surface was established with the movement error of principal axle considered. Then the milled surfaces under various cutting condition were simulated, the results of which showed that end milled surfaces were of "vaulted profile", heights of surface irregularty at various points to be different with maximum value in the middle and smaller at both sides, the difference were determined by diameter of milling cutter, feeding speed, ratio between the diameter of milling cutter and teeth point curve radius and width of workpiece. The study results can be applied to quality prediction of milled surfaces for precision and/or super precision milling operation.展开更多
文摘In accordance with the relative movement between end-milling cutter and workpiece surface, a theoretical generation model for milled surface was established with the movement error of principal axle considered. Then the milled surfaces under various cutting condition were simulated, the results of which showed that end milled surfaces were of "vaulted profile", heights of surface irregularty at various points to be different with maximum value in the middle and smaller at both sides, the difference were determined by diameter of milling cutter, feeding speed, ratio between the diameter of milling cutter and teeth point curve radius and width of workpiece. The study results can be applied to quality prediction of milled surfaces for precision and/or super precision milling operation.
