Piezoelectric Actuator/Sensor Wave Propagation Based Nondestructive Active Monitoring Method of Concrete Structures

In order to monitor the basic mechanical properties and interior damage of concrete structures,the piezoelectric actuator/sensor based wave propagation method was investigated experimentally in the laboratory using a specifically designed test setup.The energy attenuation of stress waves was measured by the relative index between the output voltage of sensors and the excitation voltage at the actuator.Based on the experimental results of concrete cube and cylinder specimens,the effect of excitation frequencies,excitation amplitude,wave propagation paths and the curing age on the output signals of sensors are evaluated.The results show that the relative voltage attenuation coefficient RVAC is an effective indicator for measuring the attenuation of stress waves through the interior of concrete.

TRANSIENT-STATE RESPONSE OF WAVE PROPAGATION IN MAGNETO-ELECTRO-ELASTIC SQUARE COLUMN

This is a continued work in studying the wave propagation in a magneto-electroelastic square column （MEESC）. Based on the analytic dispersive equation, group velocity equation and steady-state response obtained in our previous paper ＇Steady-state response of the wave propagation in a magneto-electro-elastic square column＇ published in CME, the dynamical behavior of MEESC was studied in this paper. The unlimited column is an open system. The transientstate response in the open system subjected by arbitrary external fields was derived when the propagating wave pursuing method was introduced.

Spectral-element simulations of elastic wave propagation in exploration and geotechnical applications

We apply the spectral-element method（SEM）,a high-order finite-element method（FEM） to simulate seismic wave propagation in complex media for exploration and geotechnical problems. The SEM accurately treats geometrical complexities through its flexible FEM mesh and accurately interpolates wavefields through high-order Lagrange polynomials. It has been a numerical solver used extensively in earthquake seismology. We demonstrate the applicability of SEM for selected 2D exploration and geotechnical velocity models with an open-source SEM software package SPECFEM2D. The first scenario involves a marine survey for a salt dome with the presence of major internal discontinuities,and the second example simulates seismic wave propagation for an open-pit mine with complex surface topography. Wavefield snapshots,synthetic seismograms,and peak particle velocity maps are presented to illustrate the promising use of SEM for industrial problems.

Wave propagation of laminated composite plates via GPU-based wavelet finite element method

This paper presents a novel parallel implementation technology for wave-based structural health monitoring (SHM) in laminated composite plates. The wavelet-based B-spline wavelet on he interval (BSWI) element is constructed according to Hamilton’s principle, and the element by element algorithm is parallelly executed on graphics processing unit (GPU) using compute unified device architecture (CUDA) to get the responses in full wave field accurately. By means of the Fourier spectral analysis method,the Mindlin plate theory is selected for wave modeling of laminated composite plates while the Kirchhoff plate theory predicts unreasonably phase and group velocities. Numerical examples involving wave propagation in laminated composite plates without and with crack are performed and discussed in detail. The parallel implementation on GPU is accelerated 146 times comparing with the same wave motion problem executed on central processing unit (CPU). The validity and accuracy of the proposed parallel implementation are also demonstrated by comparing with conventional finite element method (FEM) and the computation time has been reduced from hours to minutes. The damage size and location have been successfully determined according to wave propagation results based on delay-and-sum (DAS). The results show that the proposed parallel implementation of wavelet finite element method (WFEM) is very appropriate and efficient for wave-based SHM in laminated composite plates.

Numerical method for sound propagation with acoustic shock waves in transonic flow ducts

The fourth order MacCormack scheme with fourth viscous term is used to improve the shocked solutions for sound propagation in varying cross area and hard-wall ducts with transonic flow. The artificial viscous coefficient is given out by an empirical formula. It is shown from three calculation examples of acoustic shock waves that the new method is much better than the second order MacCormack method which is the best one of second order schemes. Moreover, CPU times of both methods are almost the same.

Piezoelectric-based Crack Detection Techniques of Concrete Structures:Experimental Study

Feasibility of a wave propagation-based active crack detection technique for nondestructive evaluations （NDE） of concrete structures with surface bonded and embedded piezoelectric-ceramic （PZT） patches was studied. At first, the wave propagation mechanisms in concrete were analyzed. Then, an active sensing system with integrated actuators/sensors was constructed. One PZT patch was used as an actuator to generate high frequency waves, and the other PZT patches were used as sensors to detect the propagating wave. Scattered wave signals from the damage can be obtained by subtracting the baseline signal of the intact structure from the recorded signal of the damaged structure. In the experimental study, progressive cracked damage inflicted artificially on the plain concrete beam is assessed by using both lateral and thickness modes of the PZT patches. The results indicate that with the increasing number and severity of cracks, the magnitude of the sensor output decreases for the surface bonded PZT patches, and increases for the embedded PZT patches.

ON BLOCK MATRICES ASSOCIATED WITH DISCRETE TRIGONOMETRIC TRANSFORMS AND THEIR USE IN THE THEORY OF WAVE PROPAGATION

Block matrices associated with discrete Trigonometric transforms （DTT＇s） arise in the mathematical modelling of several applications of wave propagation theory including discretizations of scatterers and radiators with the Method of Moments, the Boundary Element Method, and the Method of Auxiliary Sources. The DTT＇s are represented by the Fourier, Hartley, Cosine, and Sine matrices, which are unitary and offer simultaneous diagonalizations of specific matrix algebras. The main tool for the investigation of the aforementioned wave applications is the efficient inversion of such types of block matrices. To this direction, in this paper we develop an efficient algorithm for the inversion of matrices with U-diagonalizable blocks （U a fixed unitary matrix） by utilizing the U- diagonalization of each block and subsequently a similarity transformation procedure. We determine the developed method＇s computational complexity and point out its high efficiency compared to standard inversion techniques. An implementation of the algorithm in Matlab is given. Several numerical results are presented demonstrating the CPU-time efficiency and accuracy for ill-conditioned matrices of the method. The investigated matrices stem from real-world wave propagation applications.

Analysis of shock wave reflection from fixed and moving boundaries using a stabilized particle method

In the present paper, the efficiency of an enhanced formulation of the stabilized corrective smoothed particle method （CSPM） for simulation of shock wave propagation and reflection from fixed and moving solid boundaries in compressible fluids is investigated. The Lagrangian nature and its accuracy for imposing the boundary conditions are the two main reasons for adoption of CSPM. The governing equations are further modified for imposition of moving solid boundary conditions. In addition to the traditional artificial viscosity, which can remove numerically induced abnormal jumps in the field values, a velocity field smoothing technique is introduced as an efficient method for stabilizing the solution. The method has been implemented for one- and two-dimensional shock wave propagation and reflection from fixed and moving boundaries and the results have been compared with other available solutions. The method has also been adopted for simulation of shock wave propagation and reflection from infinite and finite solid boundaries.

Workflow to numerically reproduce laboratory ultrasonic datasets

The risks and uncertainties related to the storage of high-level radioactive waste （HLRW） can be reducedthanks to focused studies and investigations. HLRWs are going to be placed in deep geological repositories,enveloped in an engineered bentonite barrier, whose physical conditions are subjected tochange throughout the lifespan of the infrastructure. Seismic tomography can be employed to monitor itsphysical state and integrity. The design of the seismic monitoring system can be optimized via conductingand analyzing numerical simulations of wave propagation in representative repository geometry.However, the quality of the numerical results relies on their initial calibration. The main aim of this paperis to provide a workflow to calibrate numerical tools employing laboratory ultrasonic datasets. The finitedifference code SOFI2D was employed to model ultrasonic waves propagating through a laboratorysample. Specifically, the input velocity model was calibrated to achieve a best match between experimentaland numerical ultrasonic traces. Likely due to the imperfections of the contact surfaces, theresultant velocities of P- and S-wave propagation tend to be noticeably lower than those a prioriassigned. Then, the calibrated model was employed to estimate the attenuation in a montmorillonitesample. The obtained low quality factors （Q） suggest that pronounced inelastic behavior of the clay has tobe taken into account in geophysical modeling and analysis. Consequently, this contribution should beconsidered as a first step towards the creation of a numerical tool to evaluate wave propagation innuclear waste repositories. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.