CAN Catalyzed Preparation of β-Enamino Ketones from Amines and Acetylacetone

A variety of β-enamino ketones were synthesized in high to excellent yields by reacting acetylacetone with amines in the presence of a catalytic amount of cerium（IV） ammonium nitrate （CAN） under ultrasonic irradiation.

Ketone bodies and inflammation modulation:A mini-review on ketogenic diet’s potential mechanisms in mood disorders

Mental disorders such as depression and anxiety inflict significant burdens on individuals and society.Commonly prescribed treatments often involve cognitive therapy and medications.However,for patients resistant to these conventional methods,alternative therapies like the Ketogenic Diet(KD)offer a promising avenue.KD and its key metabolite,β-hydroxybutyrate(BHB),have been hypothesized to alleviate mental disorders through antiinflammatory actions,a crucial pathway in the pathophysiology of depression.This mini-review examines 15 clinical trials exploring the influence of KD and BHB on inflammation and their potential roles in managing mental disorders.Both human and animal studies were scrutinized to elucidate possible cellular and molecular mechanisms.Out of the 15 trials,10 reported reduced levels of at least one inflammatory mediator or mRNA post KD or BHB treatment,while two observed an elevation in anti-inflammatory agents.These findings suggest that KD and BHB could modulate cellular inflammatory pathways,highlighting their potential for therapeutic application in mental disorders.

Copper-Catalyzed C-C(O)C Bond Cleavage of Monoalkylated β-Diketone: Synthesis of α,β-Unsaturated Ketones

A new and simple route for the synthesis of α,β-unsaturated ketones via cleavage of the C-C(O)C single bond of monoalkylated β-diketone has been described. The reaction was catalyzed by copper, a cheap transition metal in a weakly basic medium (K3PO4) at room temperature. To carry out this study, we first had to synthesize the monoalkylated β-diketones 1. Afterwards, α,β-unsaturated ketones 2 were obtained with high yields around 80%. Finally, all the products were characterized by 1H NMR, 13C NMR, and HRMS spectra. .

Direct oxidation of the C_(sp3)-H bonds of N-heterocyclic compounds to give the corresponding ketones using a reusable heterogeneous MnO_x-N@C catalyst

Novel reusable MnOx‐N@C catalyst has been developed for the direct oxidation of N‐heterocycles under solvent‐free conditions using TBHP as benign oxidant to give the corresponding N‐heterocyclic ketones. The catalytic system exhibited a broad substrate scope and excellent regi‐oselectivity, as well as being amenable to gram‐scale synthesis. This MnOx‐N@C catalyst also showed good reusability and was successfully recycled six times without any significant loss of activity.

SYNTHESIS AND PROPERTIES OF NOVEL POLY(IMINO KETONE)S AS HIGH-PERFORMANCE POLYMERS

Di(4-bromophenyl)ketone and various aromatic diamines as the monomers,a series of novel poly(imino ketone)s (PIKs)have been synthesized via palladium-catalyzed aryl amination,which is Hartwig-Buchwald polycondensation reaction.The structures of PIKs are characterized by means of elemental analysis,FT-IR,~1H-NMR and UV-Vis spectroscopy. The results show a good agreement with the proposed structure.The general properties of PIKs are studied by DSC,TG and wide-angle X-ray diffraction,the solubility behavior is...

CeCl_3·7H_2O as an efficient catalyst for one-pot synthesis of β-amino ketones by three-component Mannich reaction

Cerium trichloride heptahydrate(CeCl_3·7H_2O) was found to be an efficient and recyclable catalyst for the three-component direct Mannich reaction of anilines and benzaldehydes with acetophenone.This protocol has advantages of high yield,no environmental pollution,mild condition,and simple work-up procedure.

Synthesis and characterization of quaternized poly(phthalazinone ether sulfone ketone)for anion-exchange membrane

Chloromethylated poly（phthalazinone ether sulfone ketone） （CMPPESK） was prepared from poly（phthalazinone ether sulfone ketone） （PPESK） using chloromethyl octyl ethers （CMOE） with lower toxicity as chloromethylated regent. CMPPESK was soluble in N-methyl-2-pyrrolidone （NMP）, N,N-dimethylacetamide （DMAc） and chloroform. Quaternized poly（phthalazinone ether sulfone ketone） （QAPPESK） was prepared from CMPPESK by quaternization. QAPPESK had excellent solvent resistance, which was only partly soluble in sulfuric acid （98%） and swollen in N,N-dimethylformamide （DMF）. The vanadium redox flow battery （V-RFB） using QAPPESK anion-exchange membrane had better performance with 88.3% of overall energy efficiency.

Gallium trichloride-catalyzed conjugate addition of indole and pyrrole to α,β-unsaturated ketones in aqueous media

Michael addition of indole and pyrrole to a variety of α, β-unsaturated ketones was efficiently promoted by a catalytic amount of GaCl3 in aqueous media to afford the corresponding products in good to excellent yields.

UV-induced Self-initiated Graft Polymerization of Acrylamide onto Poly(ether ether ketone)

Photo-grafting of hydrophilic monomer was used to enhance the hydrophilicity of poly（ether ether ketone） （PEEK） with the aim of extending its applications to biological fields. PEEK sheets were surface modified by grafting of acrylamide（AAm） with ultraviolet（UV） irradiation in the presence or absence of benzophenone（BP）. The effects of BP, irradiation time and monomer concentration on the surface wettability of PEEK were investigated. Characteriza tion of modified PEEK using scanning electron microscopy（SEM）, energy-disperse spectrometer（EDS） and water contact angle measurements shows that AAm was successfully grafted on PEEK surface both in presence and absence of BP. With the increase in irradiation time and monomer concentration, contact angles decrease to as low as 30°, demonstrating a significant improvement of surface hydrophilicity. In agreement with the decrease in contact angle, under identical conditions, the nitrogen concentration increases, suggesting the increase in grafting degree of the grafting polymerization. This investigation demonstrates a self-initiation of PEEK due to its BP-like structure in the backbone of the polymer. Though the graft polymerization proceeds more readily in the presence of BP, the self-initiated graft polymerization is clearly observed.

Ambient Ionic Liquids Used in the Reduction of Aldehydes and Ketones

The sodium borohydride reduction of aldehydes and ketones to corresponding alcohols has been accomplished via the use of ionic liquids. The alcohols are easily obtained with excellent yields and the ionic liquid BMImBF4 could be reused.

Synthesis and Crystal Structure of Lanthanum Nitrate with Methyl-2-pyridyl Ketone Benzoyl Hydrazone

A novel La complex with methyl-2-pyridyl ketone benzoyl hydrazone has been synthesized and determined by single crystal X-ray diffraction. The crystal is monoclinic with space group C2/c, a =1 7081(3) nm, b =1 5660(3) nm, c =1 3512(3) nm, α=90 00°, β=94 39(1)°, γ=90 00°, V =3 6037(12) nm 3, Z =4 . The complex is a ten-coordinated one with a lanthanum ion surrounded by a N 4O 6 set. The crystal structure is stabilized by hydrogen bonds between water molecules and NO - 3 anions.

A simple and efficient method for solvent-free iodination of hydroxylated aromatic aldehydes and ketones using iodine and iodic acid by grinding method

Green,mild and efficient iodination of hydroxylated aromatic aldehydes and ketones using iodine and iodic acid in the solidstate by grinding under solvent-free conditions at room temperature.This method provides several advantages such as environmentally friendly,short reaction times,high yields,non-hazardous and simple work-up procedure.

Baeyer-Villiger oxidation of cyclic ketones utilizing potassium peroxydisulfate(K_2S_2O_8) or sodium perborate(NaBO_3) in acidic media

The efficient, green, facile, mild and straightforward conversion procedure for the oxidation of cyclic ketones to lactones at room temperature utilizing potassium peroxydisulfate （K2S2O8） in acidic media is satisfactory to high yields without using traditional chlorinated solvents is reported. This oxidative reagent is cheap and friendly environmental procedure for industrial purposes than use of organic peracids.

Synthesis of Poly(phthalazinone ether ketone) Containing Sodium Sulfonate Groups via Direct Polymerization

1, 2-Diliydro-4-(4-hydroxyphenyl)(2H)phthalazin-1-one(DHPZ) was sulfonated in concentrated Sulfuric acid. Poly(phthalazinone ether ketone) containing pendant sodium sulfonate group was synthesized from sulfonated and pure 1,2-dihydro-4-(4-hydroxyphenyl)(2H)phthalazin-1-one, and 4,4'-difluorodiphenylketone. The sulfonated monomer and sulfonated polymer were characterized with FT-IR and H-1-NMR.

Synthesis and characterization of novel poly(aryl ether sulfone ketone)s containing phthalazinone and biphenyl moieties

A novel series of poly（aryl ether sulfone ketone）s （PPESKs） containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were between 38,330 and 67,900. The glass transition temperatures （Tg） and 5% decomposition temperatures were ranged in 253-269 ℃ and 488-500 ℃, respectively, The structures of these copolymers were confirmed by FT-IR and ^1H NMR. Moreover, all the resultant copolymers were amorphous determined by wide angle X-ray diffraction （WAXD）.

Novel Chiral PNNP-Ru Complexes:Synthesis and Application in Asymmetric Transfer Hydrogenation of Ketones

The efficient catalytic systems generated in situ from RuCl2（PPh3）3 and chiral ligands N,N-bis[2-（di-o-tolylphosphino）-benzyl]cyclohexane-1,2-diamine（2） were employed for asymmetric transfer hydrogenation of aromatic ketones, giving the corresponding optically active alcohols with high activities（up to 99% conversion） and excellent enantioselectivities（up to 96% e.e.） under mild conditions. The chiral ruthenium（Ⅱ） complex （R,R）-3 has been prepared and characterized by NMR and X-ray crystallography.

Synthesis of α,β-Unsaturated Ketones using Potassium fluoridealumina Catalyst by Microwave Irradiation

Microwave irradiation can accelerate the rate of the synthetic reaction of α,β-unsaturated ketones by using KF-Al2O3 as catalyst. The rate enhancement of the reaction is 360-860 fold.

Synthesis and Thermal Crosslinking Behavior of Poly(aryl ether ketone)s Containing 1,4-Naphthalene Moieties

A new monomer, 1,4-bis(4-fluorobenzoyl) naphthalene(compound 2) was synthesized via a two-step reaction. 1,4-Naphthalenedicarboxylic acid chloride(compound 1) was prepared by using the acyl chlorization reaction of 1,4-naphthalenedicarboxylic acid with thionyl chloride. The Friedel-Crafts acylation of compound 1 with fluorobenzene afforded compound 2 in a 80% yield. The polycondensation of compound 2 with various bisphenols in tetramethylene sulfone(TMS) in the presence of excess potassium carbonate as a condensation reagent was carried out at 210 ℃ to quantitatively afford the corresponding poly(aryl ether ketone)s(compounds 3_8) containing 1,4-naphthalene moieties. Thermal analyses showed that the polymers have T g values ranging from 496 to 500 K and are thermally stable in air with initial mass loss above 500 ℃. These novel polymers exhibited an excellent solubility in organic solvents including NMP, DMAc, and chloroform, etc. In addition, the glass transition temperatures of these polymers increased and the polymers became insoluble in chloroform after treated at 260 ℃, indicating the occurrence of a thermal crosslinking reaction.

Baeyer-Villiger oxidation of ketones with hydrogen peroxide catalyzed by Sn-aniline complex

Sn-aniline complex was prepared by a simple procedure. Cyclic and acyclic ketones were oxidized into lactones or esters with very high selectivity and yield with 30% hydrogen peroxide in the presence of Sn-aniline complex.

Colorimetric determination of nanomolar concentrations of silicate in natural waters after liquid-liquid extraction using methyl isobutyl ketone

A sensitive solvent extraction method for the determination of nonamolar concentrations of silicate in natural waters is developed. According to the traditional aqueous silicate method, silicomolybdenum blue formed by the reaction between silicate and ammoni- um molydate and reduced by metol-sulfite reagent is extracted by methyl isobutyl ketone. The absorbance can be enhanced substantially up to 10-folds. The detection limit of silicate is 8 nmol/dm^3 , which is one tenth smaller than the traditional method, with the precision of 4.0% at a silicate level of 50 nmol/dm^3 and 3.2% at a silicate level of 6 μmol/dm^3. Comparing the calibration curves in the distilled water and seawater, it can be seen that the salt effect also exists in the extraction method. However, the salt effect is a linear function of the salinity and can be corrected by simple calibration. The proposed method is successfully applied to the determination of silicate in natural waters. Natural concentrations of arsenate, arsenite and phosphate cause negligible interference.