In this paper, poly(amide-6-β-ethylene oxide) (PEBA1657) copolymer was used to prepare multilayer polyetherimide (PEI)/polydimethylsiloxane (PDMS)/PEBA1657/PDMS composite membranes by dip-coating method. Permeation b...In this paper, poly(amide-6-β-ethylene oxide) (PEBA1657) copolymer was used to prepare multilayer polyetherimide (PEI)/polydimethylsiloxane (PDMS)/PEBA1657/PDMS composite membranes by dip-coating method. Permeation behaviors of ethylene, ethane, propylene, propane, n-butane, methane and nitrogen through the multilayer composite membranes were investigated over a range of operating temperature and pressure. The permeances of light hydrocarbons through PEI/PDMS/PEBA1657/PDMS composite membranes increase with their increasing condensability, and the olefins are more permeable than their corresponding paraffins. For light hydrocarbons, the gas permeances increase significantly as temperature increasing. When the transmembrane pressure difference increases, the gas permeance increases moderately due to plasticization effect, while their apparent activation energies for permeation decrease.展开更多
An arachidic acid/poly （3, 4-ethylene dioxythiophene） （AA/PEDOT） multilayer Langmuir-Blodgett （LB） film was prepared by a modified LB film method. The theories were utilized to explain the effects between HCl mo...An arachidic acid/poly （3, 4-ethylene dioxythiophene） （AA/PEDOT） multilayer Langmuir-Blodgett （LB） film was prepared by a modified LB film method. The theories were utilized to explain the effects between HCl molecule and LB film. The gas sensitivity mechanism of poly （3, 4-ethylene dioxythiophene） （PEDOT） multilayer film can be explained by the charge transfer between p system of PEDOT and oxidization HCl system. The gas sensitivity of PEDOT LB film deposited interdigital electrode to HCl was tested. The results showed that film thickness, treating temperature, deposition speed had different influence on film gas sensitivity. The AA/PEDOT film deposited device exhibited nonlinear behavior to HCl gas at lower concentration （20-60 ppm） and linear response behavior at higher gas concentration was observed. The time of the compound LB film of the AA/PEDOT responding to the 30 ppm HCl gas is about 20 seconds, which is far quicker than the time of the film to the PEDOTPRESS film（about 80 seconds）. It is not higher film press to better film. When the film press attains 45 mNs/m, the sensitivity of the AA/PEDOT film on the contrary descends.展开更多
Silver nanowire(AgNW)has become one of the best candidates for flexible transparent electromagnetic(EMI)shielding materials,while the low corrosion resistance of AgNW hinders its application in environments with high ...Silver nanowire(AgNW)has become one of the best candidates for flexible transparent electromagnetic(EMI)shielding materials,while the low corrosion resistance of AgNW hinders its application in environments with high content of corrosive substances.Herein,an AgNW/poly(3,4-ethylene dioxythiophene)/poly(styrene sulfonate)(PEDOT:PSS)@nickel electrode was prepared through ultrasonic spray coating and electroplating methods.PEDOT:PSS is sprayed to improve the conductivity of the AgNW network,and a 9.8-16.5 nm Ni layer is deposited on the AgNW/PEDOT:PSS to protect the AgNWs from corrosion.The AgNW/PEDOT:PSS@Ni electrode shows a sheet resistance of 29 U·sq^(-1),a transmittance of 78.18%,an average EMI shielding efficiency of 19.64 dB and excellent corrosion resistance in Na2S solution.The resultant AgNW/PEDOT:PSS@Ni electrode is promisingly used in high corrosion resistance transparent EMI shielding film.展开更多
A three-dimensional coordination polymer,[Zn2(L)2(bpp)(H2O)2]n(H2L=2,5-dicarboxylic acid-3,4-ethylene dioxythiophene,bpp=1,3-di(4-pyridyl)propane),was synthesized with high yield under solvothermal reaction conditions...A three-dimensional coordination polymer,[Zn2(L)2(bpp)(H2O)2]n(H2L=2,5-dicarboxylic acid-3,4-ethylene dioxythiophene,bpp=1,3-di(4-pyridyl)propane),was synthesized with high yield under solvothermal reaction conditions and structurally characterized by elemental analysis,infrared spectra,thermogravimetric analysis,powder X-ray diffraction and single-crystal X-ray diffraction analysis.It crystallizes in orthorhombic space group Pnma with a=16.6542(9),b=18.0868(10),c=10.7528(5)?,V=3239.0(3)?3,Z=4,Dc=1.684 g/cm3,Mr=821.38,Dc=1.684 g/cm3,μ=1.683 mm-1,F(000)=1672,R=0.0466,wR=0.0933 and S=1.066.The compound exhibits a three-dimensional structure,which can be simplified into a 2-fold interpenetrated pcu topological network.Moreover,it displays luminescence emission in the solid state at room temperature.展开更多
基金Supported by Key Projects in the National Science & Technology Pillar Program (2011BAC08B00)
文摘In this paper, poly(amide-6-β-ethylene oxide) (PEBA1657) copolymer was used to prepare multilayer polyetherimide (PEI)/polydimethylsiloxane (PDMS)/PEBA1657/PDMS composite membranes by dip-coating method. Permeation behaviors of ethylene, ethane, propylene, propane, n-butane, methane and nitrogen through the multilayer composite membranes were investigated over a range of operating temperature and pressure. The permeances of light hydrocarbons through PEI/PDMS/PEBA1657/PDMS composite membranes increase with their increasing condensability, and the olefins are more permeable than their corresponding paraffins. For light hydrocarbons, the gas permeances increase significantly as temperature increasing. When the transmembrane pressure difference increases, the gas permeance increases moderately due to plasticization effect, while their apparent activation energies for permeation decrease.
基金Supported by the National Key Project of Fundamental Research( G2 0 0 0 0 7810 2 ) and the National Natural ScienceFoundation of China( No. 2 9992 5 90 - 5 )
基金Funded by the National Natural Science Foundation of China (No.60372002)
文摘An arachidic acid/poly （3, 4-ethylene dioxythiophene） （AA/PEDOT） multilayer Langmuir-Blodgett （LB） film was prepared by a modified LB film method. The theories were utilized to explain the effects between HCl molecule and LB film. The gas sensitivity mechanism of poly （3, 4-ethylene dioxythiophene） （PEDOT） multilayer film can be explained by the charge transfer between p system of PEDOT and oxidization HCl system. The gas sensitivity of PEDOT LB film deposited interdigital electrode to HCl was tested. The results showed that film thickness, treating temperature, deposition speed had different influence on film gas sensitivity. The AA/PEDOT film deposited device exhibited nonlinear behavior to HCl gas at lower concentration （20-60 ppm） and linear response behavior at higher gas concentration was observed. The time of the compound LB film of the AA/PEDOT responding to the 30 ppm HCl gas is about 20 seconds, which is far quicker than the time of the film to the PEDOTPRESS film（about 80 seconds）. It is not higher film press to better film. When the film press attains 45 mNs/m, the sensitivity of the AA/PEDOT film on the contrary descends.
基金supported by the Key R&D Program of Zhejiang Province of China(No.2020C01126)and the National Key R&D Program of China(2016YFB0401305).
文摘Silver nanowire(AgNW)has become one of the best candidates for flexible transparent electromagnetic(EMI)shielding materials,while the low corrosion resistance of AgNW hinders its application in environments with high content of corrosive substances.Herein,an AgNW/poly(3,4-ethylene dioxythiophene)/poly(styrene sulfonate)(PEDOT:PSS)@nickel electrode was prepared through ultrasonic spray coating and electroplating methods.PEDOT:PSS is sprayed to improve the conductivity of the AgNW network,and a 9.8-16.5 nm Ni layer is deposited on the AgNW/PEDOT:PSS to protect the AgNWs from corrosion.The AgNW/PEDOT:PSS@Ni electrode shows a sheet resistance of 29 U·sq^(-1),a transmittance of 78.18%,an average EMI shielding efficiency of 19.64 dB and excellent corrosion resistance in Na2S solution.The resultant AgNW/PEDOT:PSS@Ni electrode is promisingly used in high corrosion resistance transparent EMI shielding film.
文摘A three-dimensional coordination polymer,[Zn2(L)2(bpp)(H2O)2]n(H2L=2,5-dicarboxylic acid-3,4-ethylene dioxythiophene,bpp=1,3-di(4-pyridyl)propane),was synthesized with high yield under solvothermal reaction conditions and structurally characterized by elemental analysis,infrared spectra,thermogravimetric analysis,powder X-ray diffraction and single-crystal X-ray diffraction analysis.It crystallizes in orthorhombic space group Pnma with a=16.6542(9),b=18.0868(10),c=10.7528(5)?,V=3239.0(3)?3,Z=4,Dc=1.684 g/cm3,Mr=821.38,Dc=1.684 g/cm3,μ=1.683 mm-1,F(000)=1672,R=0.0466,wR=0.0933 and S=1.066.The compound exhibits a three-dimensional structure,which can be simplified into a 2-fold interpenetrated pcu topological network.Moreover,it displays luminescence emission in the solid state at room temperature.
