Highly mass activity electrocatalysts with ultralow Pt loading on carbon black for hydrogen evolution reaction

Pt-based nanocatalysts offer excellent prospects for various industries.However,the low loading of Pt with excellent performance for efficient and stable nanocatalysts still presents a considerable challenge.In this study,nanocatalysts with ultralow Pt content,excellent performance,and carbon black as support were prepared through in-situ synthesis.These~2-nm particles uniformly and stably dispersed on carbon black because of the strong s-p-d orbital hybridizations between carbon black and Pt,which suppressed the agglomeration of Pt ions.This unique structure is beneficial for the hydrogen evolution reaction.The catalysts exhibited remarkable catalytic activity for hydrogen evolution reaction,exhibiting a potential of 100 mV at 100 mA·cm^(-2),which is comparable to those of commercial Pt/C catalysts.Mass activity(1.61 A/mg)was four times that of a commercial Pt/C catalyst(0.37 A/mg).The ultralow Pt loading(6.84wt%)paves the way for the development of next-generation electrocatalysts.

Boosting Oxygen Evolution Reaction Performance on NiFe‑Based Catalysts Through d‑Orbital Hybridization

Anion-exchange membrane water electrolyzers(AEMWEs)for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant NiFe-based catalysts.By introducing a third metal into NiFe-based catalysts to construct asymmetrical M-NiFe units,the d-orbital and electronic structures can be adjusted,which is an important strategy to achieve sufficient oxygen evolution reaction(OER)performance in AEMWEs.Herein,the ternary NiFeM(M:La,Mo)catalysts featured with distinct M-NiFe units and varying d-orbitals are reported in this work.Experimental and theoretical calculation results reveal that the doping of La leads to optimized hybridization between d orbital in NiFeM and 2p in oxygen,resulting in enhanced adsorption strength of oxygen intermediates,and reduced rate-determining step energy barrier,which is responsible for the enhanced OER performance.More critically,the obtained NiFeLa catalyst only requires 1.58 V to reach 1 A cm^(−2) in an anion exchange membrane electrolyzer and demonstrates excellent long-term stability of up to 600 h.

正常成年人水平特异性CE-Chirp刺激声与Click刺激声诱发听性脑干反应的比较

目的研究正常成年人水平特异性CE-Chirp(level specific CE-Chirp,CE-Chirp LS)刺激声与Click刺激声诱发听性脑干反应(auditory brainstem response,ABR)反应阈与纯音听阈的关系及在不同声强下两种刺激声所诱发的ABR波形特点,探讨CE-Chirp LS声诱发的ABR在听觉功能客观评估中的应用价值。方法选择正常成年人21例(共42耳)分别在0.5、1.0、2.0、4.0 kHz进行纯音气导听阈测试,获取其双耳各频率的纯音听阈,分别采用CEChirp LS刺激声与Click刺激声诱发ABR,测量2种刺激声在80、60、40 dB nHL的Ⅴ波波幅,获得2种刺激声下受试者的Ⅴ波反应阈,获取其在80 dB nHL刺激强度时Ⅰ、Ⅲ、Ⅴ波潜伏期。按照自身对照的方法对相同刺激强度下2种刺激声诱发的ABR潜伏期及波幅差异性进行统计分析,比较2种刺激声下Ⅴ波反应阈与纯音听阈差值。结果正常成年人80、60、40 dB nHL刺激强度下,CE-Chirp LS刺激声诱发的ABR的Ⅴ波波幅均大于Click刺激声,差异有统计学意义(P<0.001);CE-Chirp LS刺激声诱发的ABR的V波反应阈与纯音平均听阈差值均低于Click刺激声,差异有统计学意义(P<0.05);80 dB nHL声强下CE-Chirp LS刺激声Ⅰ波潜伏期长于Click刺激声,差异有统计学意义(P<0.001),CE-Chirp LS刺激声Ⅲ、Ⅴ波潜伏期与Click刺激声比较,差异无统计学意义(P>0.05)。结论正常成年人CE-Chirp LS刺激声与Click刺激声比较,无论在高强度还是低强度刺激下波幅均明显增大,Ⅴ波反应阈更接近于纯音听阈,更有利于纯音听阈判定,但潜伏期个体差异更大。

Synthesis and Characterization of Compounds Containing 1,2,3-Triazole via Click Reaction and Ag(Ⅰ) Complex

In this work, 1,4-bis(4-phenyl-1,2,3-triazole)benzene, 1,3-bis(4-phenyl-1,2,3-triazole)propane, bis(1-phenyl-1,2,3-triazole)-methylphenylsilane, and 1-ally-4-phenyl-1,2,3-triazole have been designed and synthesized via Click reaction. Fourier transform infrared spectroscopy(FT-IR) and nuclear magnetic resonance spectroscopy(NMR) were used to confirm the compounds' structures. The effect of silicon atom on the optical properties has also been studied. The UV-vis absorption wavelength of silicon-containing compound is about ca. 10 nm red-shifted when compared with that of other three compounds. The fluorescence emission bands of the compounds in CHCl_3 solutions were observed around ca. 440 nm. And the luminescent coordination compound, namely [AgL1?NO_3?3H_2O]n, based on the ligand 1-allyl-4-phenyl-1,2,3-triazole has been prepared. In addition, this complex exhibits a 1 D chain structure. The crystal structure has been determined by single-crystal X-ray diffraction, and the optical properties have been investigated by fluorescence spectrum. In summary, our work may provide new materials with luminescent property which is potentially useful in material fields.

Preparation of polymer brushes on attapulgite surfaces via a combination of CROP and click reaction

In this work,by a combination of controlled ring-opening polymerization(CROP) and click reaction,we reported a facile and useful method to synthesize linear poly(ε-caprolactone) at attapulgite nanocomposites with well-defined structures.For this,first, the chlorine terminated attapulgite was prepared by the self-assembly of 3-chloropropyltrimethoxysiIane from the surfaces of attapulgite.And then,the terminal chlorines of modified attapulgite were substituted with azido groups.As the second step,linear propa...

“Click”运动高升力机制

研究了具有“Click”运动的模型翼在三维流场中的气动特性.采用计算流体力学方法求解三维非定常不可压缩Navier-Stokes方程,对比了简谐和“Click”运动所产生的升力与阻力,研究了升力最大时的前缘涡特性和展向流动.结果表明,在下拍过程的升力最大处,“Click”和简谐运动的前缘涡能够分别维持至翼展的80%和60%处.两种运动都会在翼展方向存在维持展向流动的压力梯度,而“Click”运动具有更显著的展向压力梯度,对展向涡度的能量输运效率更高,因此其前缘涡能够保持更完整的形态.在上拍过程中,两种运动的前缘涡形态差异不明显,“Click”运动快速上拍的运动特点使其能够快速地摆脱尾涡的干扰,从而维持升力.

Poly (N-Isopropyl Acrylamide-<i>Co</i>-Vanillin Acrylate) Dual Responsive Functional Copolymers for Grafting Biomolecules by Schiff’s Base Click Reaction

This article reports on the synthesis of acrylate monomer from renewable material. Vanillin was selected to be the start material to produce new monomer called vanillin acrylate and abbreviated by (VA). It has been successfully investigated by 1H, 13C NMR, IR and UV and all results were in logic state. The next step was to synthetize three different thermo-responsive functional copolymers by incorporation of three different molar ratios of vanillin acrylate (10, 20, 30 mol%) with N-Isopropylacrylamide via free radical polymerization by AIBN as initiator in solution. All copolymers were deduced by 1NMR and IR and all showed the presence of aldehyde group. The copolymer was used for grafting of tryptophan and β-alanine through the chemical link between amino group and the active aldehyde group by click reactions to form Schiff’s base imine compounds. Moreover, polymers were also elucidated by 1HNMR, IR and UV, Size Exclusion Chromatography (SEC) was used for the molecular weight determination, differential scanning calorimeter (DSC) for glass temperature of solid polymers, XRD for crystallinity. UV-vis Spectroscopy was used for the determination of phase separation or the lower critical solution temperature (Tc) of polymers solution not only in deionized water but in pH5 and pH11. The mount of conversation and linked amino acid was determined by UV-vis Spectroscopy.

Reaction视频中用户弹幕信息交互行为的情感反应生成机理研究

深入挖掘Reaction视频中弹幕信息交互行为的情感反应机理有助于理解用户弹幕创作背后的情感生成原因及情感变化过程。本文基于情感反应模型,利用定向内容分析法对哔哩哔哩网站中11个热门视频的弹幕信息资源、视频内容以及reactor反应情况展开编码研究,构建了Reaction视频中用户弹幕信息交互行为的情感反应生成机理模型。研究发现,Reaction视频弹幕信息交互行为中的情感反应生成机理总体上遵循“信息刺激-情感反应”的路径,信息刺激有时会独立唤醒情绪或特定情感态度,有时也会通过唤醒特定情感态度进而影响情绪或内化情感态度的生成。该模型有助于提升情感反应理论在计算机协助交流中的情境化探索,也将为社交媒体中用户与信息交互提供优化建议。

Eutectic Solution Enables Powerful Click Reaction for In-Situ Construction of Advanced Gel Electrolytes

Thiol-ene click reaction is an intriguing strategy for preparing polymer electrolytes due to its high activity,atom economy and less side reaction.However,the explosive reaction rate and the use of non-electrolytic amine catalyst hamper its application in in-situ batteries.Herein,a nitrogen-containing eutectic solution is designed as both the catalyst of the thiol-ene reaction and the plasticizer to in-situ synthesize the gel polymer electrolytes,realizing a mild in-situ gelation process and the preparation of high-performance gel electrolytes.The obtained gel polymer electrolytes exhibit a high ionic conductivity of 4×10^(−4)S cm^(−1)and lithium-ion transference number(t_(Li)^(+))of 0.51 at 60°C.The as-assembled Li/LiFePO_(4)(LFP)cell delivers a high initial discharge capacity of 155.9 mAh g^(-1),and a favorable cycling stability with the capacity retention of 82%after 800 cycles at 1 C is also obtained.In addition,this eutectic solution significantly improves the rate performance of the LFP cell with high specific capacity of 141.5 and 126.8 mAh g^(-1)at 5 C and 10 C,respectively,and the cell can steadily work at various charge–discharge rate for 200 cycles.This powerful and efficient strategy may provide a novel way for in-situ preparing gel polymer electrolytes with desirable comprehensive performances.

Nano-copper Oxide as Catalyst for Click Reactions

Click reactions are not specific reactions, but they are a way of generating products that follow examples in nature by joining small moieties, with each other producing a huge molecule in a good yield. The mind of that reaction is used in biomolecules synthesis, pharmacological and various biometric applications. The first Click reaction is the Copper compounds-catalyzed reaction of an azide with an alkyne （CuAAC）, this copper-catalyzed ＂click＂ does not require legands on the metal but the metal oxides also can accelerate the reactions. For enhancement the products of Click reactions we were replacing the copper compounds in a classical reaction by the prepared nanocopper compound （NPs）. And measure the consumption of starting material. Behind the evolution is the catalytic effect of nanocopper compounding （NPs） on （H2O2）. Owing to the huge surface area of nanocopper compound （NPs）, it was found that： the （NPs） can speed up decomposition of H2O2, also can accelerate the classical click reaction.

Quantitative Determination of Click Reaction in the Presence of Glycine Derivatives and in Dilute Solution

The click reaction is one of the latest techniques for the functional analysis of bioactive compounds and the analysis makes novel concepts and strategies for medicinal chemistry. N-methylated glycine derivatives have inhibitory activity for the click reaction in direct Cu(I) system because of decrease of Cu(I) concentration. The Cu(I) concentration recovered effectively by sodium ascorbate. Quantitative determination of click reaction at various ligand concentrations revealed that the decrease in reaction yields was observed in a substrate concentration-dependent manner.

Tuning electronic structure of RuO_(2)by single atom Zn and oxygen vacancies to boost oxygen evolution reaction in acidic medium

The poor stability of RuO_(2)electrocatalysts has been the primary obstacles for their practical application in polymer electrolyte membrane electrolyzers.To dramatically enhance the durability of RuO_(2)to construct activity-stability trade-off model is full of significance but challenging.Herein,a single atom Zn stabilized RuO_(2)with enriched oxygen vacancies(SA Zn-RuO_(2))is developed as a promising alternative to iridium oxide for acidic oxygen evolution reaction(OER).Compared with commercial RuO_(2),the enhanced Ru–O bond strength of SA Zn-RuO_(2)by forming Zn-O-Ru local structure motif is favorable to stabilize surface Ru,while the electrons transferred from Zn single atoms to adjacent Ru atoms protects the Ru active sites from overoxidation.Simultaneously,the optimized surrounding electronic structure of Ru sites in SA ZnRuO_(2)decreases the adsorption energies of OER intermediates to reduce the reaction barrier.As a result,the representative SA Zn-RuO_(2)exhibits a low overpotential of 210 mV to achieve 10 mA cm^(-2)and a greatly enhanced durability than commercial RuO_(2).This work provides a promising dual-engineering strategy by coupling single atom doping and vacancy for the tradeoff of high activity and catalytic stability toward acidic OER.

Exciting lattice oxygen of nickel–iron bi-metal alkoxide for efficient electrochemical oxygen evolution reaction

High efficiency,cost-effective and durable electrocatalysts are of pivotal importance in energy conversion and storage systems.The electro-oxidation of water to oxygen plays a crucial role in such energy conversion technologies.Herein,we report a robust method for the synthesis of a bimetallic alkoxide for efficient oxygen evolution reaction(OER)for alkaline electrolysis,which yields current density of 10 mA cm^(-2)at an overpotential of 215 mV in 0.1 M KOH electrolyte.The catalyst demonstrates an excellent durability for more than 540 h operation with negligible degradation in activity.Raman spectra revealed that the catalyst underwent structure reconstruction during OER,evolving into oxyhydroxide,which was the active site proceeding OER in alkaline electrolyte.In-situ synchrotron X-ray absorption experiment combined with density functional theory calculation suggests a lattice oxygen involved electrocatalytic reaction mechanism for the in-situ generated nickel–iron bimetal-oxyhydroxide catalyst.This mechanism together with the synergy between nickel and iron are responsible for the enhanced catalytic activity and durability.These findings provide promising strategies for the rational design of nonnoble metal OER catalysts.

Boric Acid-Assisted Pyrolysis for High-Loading Single-Atom Catalysts to Boost Oxygen Reduction Reaction in Zn-Air Batteries

The emerging of single-atom catalysts(SACs)offers a great opportunity for the development of advanced energy storage and conversion devices due to their excellent activity and durability,but the actual mass production of high-loading SACs is still challenging.Herein,a facile and green boron acid(H_(3)BO_(3))-assisted pyrolysis strategy is put forward to synthesize SACs by only using chitosan,cobalt salt and H_(3)BO_(3)as precursor,and the effect of H_(3)BO_(3)is deeply investigated.The results show that molten boron oxide derived from H_(3)BO_(3)as ideal high-temperature carbonization media and blocking media play important role in the synthesis process.As a result,the acquired Co/N/B tri-doped porous carbon framework(Co-N-B-C)not only presents hierarchical porous structure,large specific surface area and abundant carbon edges but also possesses high-loading single Co atom(4.2 wt.%),thus giving rise to outstanding oxygen catalytic performance.When employed as a catalyst for air cathode in Zn-air batteries,the resultant Co-N-B-C catalyst shows remarkable power density and long-term stability.Clearly,our work gains deep insight into the role of H_(3)BO_(3)and provides a new avenue to synthesis of high-performance SACs.

Deformable Catalytic Material Derived from Mechanical Flexibility for Hydrogen Evolution Reaction

Deformable catalytic material with excellent flexible structure is a new type of catalyst that has been applied in various chemical reactions,especially electrocatalytic hydrogen evolution reaction(HER).In recent years,deformable catalysts for HER have made great progress and would become a research hotspot.The catalytic activities of deformable catalysts could be adjustable by the strain engineering and surface reconfiguration.The surface curvature of flexible catalytic materials is closely related to the electrocatalytic HER properties.Here,firstly,we systematically summarized self-adaptive catalytic performance of deformable catalysts and various micro–nanostructures evolution in catalytic HER process.Secondly,a series of strategies to design highly active catalysts based on the mechanical flexibility of lowdimensional nanomaterials were summarized.Last but not least,we presented the challenges and prospects of the study of flexible and deformable micro–nanostructures of electrocatalysts,which would further deepen the understanding of catalytic mechanisms of deformable HER catalyst.

“Buckets effect”in the kinetics of electrocatalytic reactions

In this study,we systematically investigated the effect of proton concentration on the kinetics of the oxygen reduction reaction(ORR)on Pt(111)in acidic solutions.Experimental results demonstrate a rectangular hyperbolic relationship,i.e.,the ORR current excluding the effect of other variables increases with proton concentration and then tends to a constant value.We consider that this is caused by the limitation of ORR kinetics by the trace oxygen concentration in the solution,which determines the upper limit of ORR kinetics.A model of effective concentration is further proposed for rectangular hyperbolic relationships:when the reactant concentration is high enough to reach a critical saturation concentration,the effective reactant concentration will become a constant value.This could be due to the limited concentration of a certain reactant for reactions involving more than one reactant or the limited number of active sites available on the catalyst.Our study provides new insights into the kinetics of electrocatalytic reactions,and it is important for the proper evaluation of catalyst activity and the study of structureperformance relationships.

Precisely Control Relationship between Sulfur Vacancy and H Absorption for Boosting Hydrogen Evolution Reaction

Ef fective and robust catalyst is the core of water splitting to produce hydrogen.Here, we report an anionic etching method to tailor the sulfur vacancy(VS) of NiS_(2) to further enhance the electrocatalytic performance for hydrogen evolution reaction(HER). With the VS concentration change from 2.4% to 8.5%, the H* adsorption strength on S sites changed and NiS_(2)-VS 5.9% shows the most optimized H* adsorption for HER with an ultralow onset potential(68 m V) and has long-term stability for 100 h in 1 M KOH media. In situ attenuated-total-reflection Fourier transform infrared spectroscopy(ATR-FTIRS) measurements are usually used to monitor the adsorption of intermediates. The S-H* peak of the Ni S_(2)-VS 5.9% appears at a very low voltage, which is favorable for the HER in alkaline media. Density functional theory calculations also demonstrate the Ni S_(2)-VS 5.9% has the optimal |ΔG^(H*)| of 0.17 e V. This work offers a simple and promising pathway to enhance catalytic activity via precise vacancies strategy.

Diffusion and reaction mechanism of limestone and quartz in fluxed iron ore pellet roasting process

The increase to the proportion of fluxed pellets in the blast furnace burden is a useful way to reduce the carbon emissions in the ironmaking process.In this study,the interaction between calcium carbonate and iron ore powder and the mineralization mechanism of fluxed iron ore pellet in the roasting process were investigated through diffusion couple experiments.Scanning electron microscopy with energy dispersive spectroscopy was used to study the elements’diffusion and phase transformation during the roasting process.The results indicated that limestone decomposed into calcium oxide,and magnetite was oxidized to hematite at the early stage of preheating.With the increase in roasting temperature,the diffusion rate of Fe and Ca was obviously accelerated,while the diffusion rate of Si was relatively slow.The order of magnitude of interdiffusion coefficient of Fe_(2)O_(3)-CaO diffusion couple was 10^(−10) m^(2)·s^(−1) at a roasting temperature of 1200℃for 9 h.Ca_(2)Fe_(2)O_(5) was the initial product in the Fe_(2)O_(3)-CaO-SiO_(2) diffusion interface,and then Ca_(2)Fe_(2)O_(5) continued to react with Fe_(2)O_(3) to form CaFe_(2)O_(4).With the expansion of the diffusion region,the sillico-ferrite of calcium liquid phase was produced due to the melting of SiO_(2) into CaFe_(2)O_(4),which can strengthen the consolidation of fluxed pellets.Furthermore,andradite would be formed around a small part of quartz particles,which is also conducive to the consolidation of fluxed pellets.In addition,the principle diagram of limestone and quartz diffusion reaction in the process of fluxed pellet roasting was discussed.

Particle agglomeration and inhibition method in the fluidized pyrolysis reaction of waste resin

This work investigated the pyrolysis reaction of waste resin in a fluidized bed reactor.It was found that the pyrolysis-generated ash would adhere to the surface of ceramic particles,causing particle agglomeration and defluidization.Adding kaolin could effectively inhibit the particle agglomeration during the fluidized pyrolysis reaction through physical isolation and chemical reaction.On the one hand,kaolin could form a coating layer on the surface of ceramic particles to prevent the adhesion of organic ash generated by the pyrolysis of resin.On the other hand,when a sufficient amount of kaolin(-0.2%(mass))was added,the activated kaolin could fully contact with the Na+ ions generated by the pyrolysis of resin and react to form a high-melting aluminosilicate mineral(nepheline),which could reduce the formation of low-melting-point sodium sulfate and thereby avoid the agglomeration of ceramic particles.

Boosted Electrocatalytic Glucose Oxidation Reaction on Noble-Metal-Free MoO_(3)-Decorated Carbon Nanotubes

Electrocatalytic glucose oxidation reaction(GOR)has attracted much attention owing to its crucial role in biofuel cell fabrication.Herein,we load MoO_(3)nanoparticles on carbon nanotubes(CNTs)and use a discharge process to prepare a noblemetal-free MC-60 catalyst containing MoO_(3),Mo_(2)C,and a Mo_(2)C–MoO_(3)interface.In the GOR,MC-60 shows activity as high as 745μA/(mmol/L cm^(2)),considerably higher than those of the Pt/CNT(270μA/(mmol/L cm^(2)))and Au/CNT catalysts(110μA/(mmol/L cm^(2))).In the GOR,the response minimum on MC-60 is as low as 8μmol/L,with a steady-state response time of only 3 s.Moreover,MC-60 has superior stability and anti-interference ability to impurities in the GOR.The better performance of MC-60 in the GOR is attributed to the abundant Mo sites bonding to C and O atoms at the MoO_(3)–Mo_(2)C interface.These Mo sites create active sites for promoting glucose adsorption and oxidation,enhancing MC-60 performance in the GOR.Thus,these results help to fabricate more effi cient noble-metal-free catalysts for the fabrication of glucose-based biofuel cells.