Electropulsing treatment（EPT） was performed on a nickel base corrosion resistant alloy during aging.The effect of EPT on the microstructure and corrosion resistance of the alloy and the mechanisms were investigated....Electropulsing treatment（EPT） was performed on a nickel base corrosion resistant alloy during aging.The effect of EPT on the microstructure and corrosion resistance of the alloy and the mechanisms were investigated.The results show that the intergranular corrosion resistance can be improved substantially without the degradation of mechanical properties of the alloy by EPT.The EPT has an effect of enhancing the interface diffusion rate of the alloying element,which is higher than the body diffusion rate.And thus discontinuous precipitation of M23C6 type carbides appears at the grain boundary in the alloy by EPT,which decreases the depletion extent of the alloying elements at the grain boundary substantially.As a result,the intergranular corrosion resistance of the alloy can be improved by the EPT without any degradation of mechanical properties.展开更多
The evolution of precipitates and mechanical properties of AZ80A magnesium alloy with aging time was studied by in situ observation with SEM,TEM and tensile testing.The results show that the continuous precipitation(C...The evolution of precipitates and mechanical properties of AZ80A magnesium alloy with aging time was studied by in situ observation with SEM,TEM and tensile testing.The results show that the continuous precipitation(CP)phases near the reaction front(RF)are replaced by the discontinuous precipitation(DP)phases at the early aging stage.In DP regions,the elliptical phases coarsen obviously with the increase of aging time,which results in a slightly slow reduction of the intracrystalline hardness of DP regions.In CP regions,some small plate phases reprecipitate simultaneously with the growth of the initial precipitates,which contributes to a slight increase in the intracrystalline hardness in CP regions at the later aging stage.The aging hardening of DP regions is faster and stronger than that of CP regions.However,the age strengthening of CP regions not only compensates for the overaging softening of DP regions but also improves the strength of the alloy.展开更多
The effect of precipitation on the internal friction(IF)of AZ91 magnesium alloy was investigated by using X-ray diffraction(XRD)analysis,scanning electron microscope(SEM)observation,and dynamic mechanical analysis(DMA...The effect of precipitation on the internal friction(IF)of AZ91 magnesium alloy was investigated by using X-ray diffraction(XRD)analysis,scanning electron microscope(SEM)observation,and dynamic mechanical analysis(DMA).Six different states of alloy were prepared by applying different heat treatment processes:as-cast,in-complete solid solution,complete solid solution,micro-precipitation,continuous precipitation and continuous-discontinuous precipitation.It was found that the internal friction of in-completely solid-solutionized,completely solid-solutionized and micro-precipitated specimens showed a similar characteristic,and the grain boundary relaxation is completed depressed due to the Al atoms supersaturated in theα-Mg solution.However,a thermal relaxation internal friction peak was observed for continuously precipitated and continuously-discontinuously precipitated specimens at around 438 K and frequency of about 1 Hz,which was attributed to the grain boundaries relaxation.Furthermore,it was found that the relaxation of theβ-Mg17Al12/α-Mg phase interfaces should give its contribution to the background internal friction in the as-cast,continuously precipitated and continuously-discontinuously precipitated specimens.展开更多
基金Project(2010CB631203)supported by National Basic Research Program of ChinaProject(51001021)supported by the National Natural Science Foundation of ChinaProjects(20100042120008,20100042110006)supported by the PhD Programs Foundation of Ministry of Education of China
文摘Electropulsing treatment（EPT） was performed on a nickel base corrosion resistant alloy during aging.The effect of EPT on the microstructure and corrosion resistance of the alloy and the mechanisms were investigated.The results show that the intergranular corrosion resistance can be improved substantially without the degradation of mechanical properties of the alloy by EPT.The EPT has an effect of enhancing the interface diffusion rate of the alloying element,which is higher than the body diffusion rate.And thus discontinuous precipitation of M23C6 type carbides appears at the grain boundary in the alloy by EPT,which decreases the depletion extent of the alloying elements at the grain boundary substantially.As a result,the intergranular corrosion resistance of the alloy can be improved by the EPT without any degradation of mechanical properties.
基金financially supported by the Natural Science Foundation of Hunan Province, China (No. 2018JJ2503)the Postgraduate Independent Exploration and Innovation Project of Central South University, China (No. 1053320171111)
文摘The evolution of precipitates and mechanical properties of AZ80A magnesium alloy with aging time was studied by in situ observation with SEM,TEM and tensile testing.The results show that the continuous precipitation(CP)phases near the reaction front(RF)are replaced by the discontinuous precipitation(DP)phases at the early aging stage.In DP regions,the elliptical phases coarsen obviously with the increase of aging time,which results in a slightly slow reduction of the intracrystalline hardness of DP regions.In CP regions,some small plate phases reprecipitate simultaneously with the growth of the initial precipitates,which contributes to a slight increase in the intracrystalline hardness in CP regions at the later aging stage.The aging hardening of DP regions is faster and stronger than that of CP regions.However,the age strengthening of CP regions not only compensates for the overaging softening of DP regions but also improves the strength of the alloy.
文摘The effect of precipitation on the internal friction(IF)of AZ91 magnesium alloy was investigated by using X-ray diffraction(XRD)analysis,scanning electron microscope(SEM)observation,and dynamic mechanical analysis(DMA).Six different states of alloy were prepared by applying different heat treatment processes:as-cast,in-complete solid solution,complete solid solution,micro-precipitation,continuous precipitation and continuous-discontinuous precipitation.It was found that the internal friction of in-completely solid-solutionized,completely solid-solutionized and micro-precipitated specimens showed a similar characteristic,and the grain boundary relaxation is completed depressed due to the Al atoms supersaturated in theα-Mg solution.However,a thermal relaxation internal friction peak was observed for continuously precipitated and continuously-discontinuously precipitated specimens at around 438 K and frequency of about 1 Hz,which was attributed to the grain boundaries relaxation.Furthermore,it was found that the relaxation of theβ-Mg17Al12/α-Mg phase interfaces should give its contribution to the background internal friction in the as-cast,continuously precipitated and continuously-discontinuously precipitated specimens.
