纳米多孔金(NPG)具有高曲率、高比表面积的结构特征,且比强度较高,作为一种结构功能一体化材料受到广泛关注。然而,影响NPG实际应用的最大障碍之一是其在拉伸作用下内部单根韧带失效导致的塑性失稳。过去的研究主要集中在宏观力学实验...纳米多孔金(NPG)具有高曲率、高比表面积的结构特征,且比强度较高,作为一种结构功能一体化材料受到广泛关注。然而,影响NPG实际应用的最大障碍之一是其在拉伸作用下内部单根韧带失效导致的塑性失稳。过去的研究主要集中在宏观力学实验的研究,无法直接观察单根韧带的塑性变形行为。随着原位透射电子显微镜(transmission electron microscopy,TEM)的发展,已具备从原子尺度研究NPG中单根韧带塑性变形过程的能力,这对理解NPG变形机理进而合理设计制备高塑性纳米多孔结构金属具有重要意义。本文主要以近几年利用球差校正透射电子显微镜(Cs⁃corrected TEM)原位原子尺度研究NPG塑性变形的系列工作为例,简要综述了NPG单根韧带在塑性变形过程中位错运动(攀移和滑移)和表面原子扩散行为的最新进展,并对纳米结构金属材料的未来研究进行了展望。展开更多
In order to well understand the elementary mechanisms that govern the hot working process of a V？5Cr？5Ti alloy （mass fraction, %）, thermal activation parameters under compression were measured in a temperature ran...In order to well understand the elementary mechanisms that govern the hot working process of a V？5Cr？5Ti alloy （mass fraction, %）, thermal activation parameters under compression were measured in a temperature range of 1373？1673 K by a Gleeble？3800 system. The results show that the stress exponentn is 4.87 and the activation energyQis 375.89 kJ/mol for the power law equation. The activation energy is determined as 288.34 kJ/mol, which is close to the self-diffusion energy of alloy （270？300 kJ/mol） by introducing a threshold stress（σ0） variable. The typical values of physical activation volume （Vp） and strain rate sensitivity （m） are measured as （120？700）b3 and 0.075？0.122, respectively, by the repeated stress relaxation tests. These activation parameters indicate that the rate controlling mechanism for V？5Cr？5Ti alloy compressed in ranges of 1373？1673 K and 0.001？1.0 s？1 is the dislocation climb by overcoming of forest dislocations.展开更多
The effects of Mg and semi solid processing on the creep properties ofA356 A1 alloy were investigated. The results show that the dislocation climb controlled creep is the dominant creep mechanism and it is not affecte...The effects of Mg and semi solid processing on the creep properties ofA356 A1 alloy were investigated. The results show that the dislocation climb controlled creep is the dominant creep mechanism and it is not affected by the semi solid processing and further addition of Mg. Mg improves the alloy creep properties probably by forming large Chinese script Mg2Si compounds at the interdendritic regions. The semi solid processed specimens exhibit better creep properties in comparison with the as cast ones. It is attributed to the reduction in the stacking fault energy resulting from the significant dissolution of Mg in the a（A1） phase.展开更多
文摘纳米多孔金(NPG)具有高曲率、高比表面积的结构特征,且比强度较高,作为一种结构功能一体化材料受到广泛关注。然而,影响NPG实际应用的最大障碍之一是其在拉伸作用下内部单根韧带失效导致的塑性失稳。过去的研究主要集中在宏观力学实验的研究,无法直接观察单根韧带的塑性变形行为。随着原位透射电子显微镜(transmission electron microscopy,TEM)的发展,已具备从原子尺度研究NPG中单根韧带塑性变形过程的能力,这对理解NPG变形机理进而合理设计制备高塑性纳米多孔结构金属具有重要意义。本文主要以近几年利用球差校正透射电子显微镜(Cs⁃corrected TEM)原位原子尺度研究NPG塑性变形的系列工作为例,简要综述了NPG单根韧带在塑性变形过程中位错运动(攀移和滑移)和表面原子扩散行为的最新进展,并对纳米结构金属材料的未来研究进行了展望。
基金Project(11105127)supported by the National Natural Science Foundation of China
文摘In order to well understand the elementary mechanisms that govern the hot working process of a V？5Cr？5Ti alloy （mass fraction, %）, thermal activation parameters under compression were measured in a temperature range of 1373？1673 K by a Gleeble？3800 system. The results show that the stress exponentn is 4.87 and the activation energyQis 375.89 kJ/mol for the power law equation. The activation energy is determined as 288.34 kJ/mol, which is close to the self-diffusion energy of alloy （270？300 kJ/mol） by introducing a threshold stress（σ0） variable. The typical values of physical activation volume （Vp） and strain rate sensitivity （m） are measured as （120？700）b3 and 0.075？0.122, respectively, by the repeated stress relaxation tests. These activation parameters indicate that the rate controlling mechanism for V？5Cr？5Ti alloy compressed in ranges of 1373？1673 K and 0.001？1.0 s？1 is the dislocation climb by overcoming of forest dislocations.
文摘The effects of Mg and semi solid processing on the creep properties ofA356 A1 alloy were investigated. The results show that the dislocation climb controlled creep is the dominant creep mechanism and it is not affected by the semi solid processing and further addition of Mg. Mg improves the alloy creep properties probably by forming large Chinese script Mg2Si compounds at the interdendritic regions. The semi solid processed specimens exhibit better creep properties in comparison with the as cast ones. It is attributed to the reduction in the stacking fault energy resulting from the significant dissolution of Mg in the a（A1） phase.
基金the Major Science and Technology Special Project of Sichuan Province(Grant No.2020ZDZX0009)the National Natural Science Foundation of China(Grant Nos.12222209 and 51875574).
