乙烯催化二聚制丁烯－1技术进展

乙烯催化二聚制丁－１技术是当今聚烯烃工业中具有重要意义的工业过程。介绍了４种竞争发展的新工艺及催化剂研究的进展，并对各新工艺的经济性进行了评价。

乙炔二聚催化反应的最佳工艺条件研究

本文采用正交实验设计,通过三十三次实验,详细地考察了氯丁橡胶生产过程中的关键反应——乙炔二聚催化反应在Nieuwland催化剂中的最佳反应条件与最佳工艺条件,并讨论了影响乙炔二聚催化反应的工程因素及其规律性。

乙炔二聚催化反应的宏观动力学研究

1 前言乙炔在Nieuwland催化剂中的二聚催化反应是氯丁橡胶(CR)生产过程中的关键反应,其主要产物乙烯基乙炔(MVA)是生产CR单体——氯丁二烯的主要原料之一。据调查,国内现有的三家氯丁橡胶厂几乎都处于亏损生产状态,严重的每年亏损达400万元人民币。

γ-Al_2O_3载体改性对环己酮二聚体脱氢合成邻苯基苯酚催化剂性能的影响

研究了利用金属氧化物进行载体γ-Al2O3改性对0.5%Pt-5%K2O/γ-Al2O3催化剂在环己酮二聚脱氢合成邻苯基苯酚反应中催化性能的影响。以La2O3、Ce2O3、MgO和CaO对γ-Al2O3栽体进行改性,比较了4种金属氧化物对生成邻苯基苯酚收率的影响。结果表明,以CaO改性的催化剂可使邻苯基苯酚的收率显著提高。通过对使用CaO改性的条件进行研究,确定了最佳改性条件:CaO用量为γ-Al2O3质量的20%,焙烧温度600℃,焙烧时间5h。以改性γ-Al2O3为载体制备的催化剂合成邻苯基苯酚收率达95.58%。利用XRD、XPS、H2-TPR和NH3-TPD对催化剂进行了表征,并结合催化剂的评价结果,对使用CaO进行载体改性后邻苯基苯酚收率提高的原因进行了探讨。

己二腈生产技术进展及展望

本文介绍了己二腈主要的生产技术路线,包括己二酸催化氨化法、丙烯腈二聚法、丁二烯法和己内酰胺法,并对这四种工艺路线进行了优缺点的对比分析。此外,还对国内己二腈的研究及生产现状进行了整理总结,并提出了今后己二腈生产技术的研究方向和市场前景。

Nickel catalysts with asymmetric steric hindrance for ethylene polymerization

α-Diimide catalysts have attracted widespread attention due to their unique chain walking characteristics.A series ofα-diimide nickel/palladium catalysts with different electronic effects and steric hindrances were designed and synthesized for olefin polymerization.In this work,we synthesized a series of asymmetricα-diimide nickel complexes with different steric hindrances and used them for ethylene polymerization.These nickel catalysts have high ethylene polymerization activity,up to 6.51×10^(6)g·mol^(−1)·h^(−1),and the prepared polyethylene has a moderate melting point and high molecular weight(up to 38.2×10^(4)g·mol^(−1)),with a branching density distribution between 7 and 94 branches per 1000 carbons.More importantly,the polyethylene prepared by these catalysts exhibits excellent tensile properties,with strain and stress reaching 800%and 30 MPa,respectively.

Syntheses,crystal structures,and catalytic properties of three zinc(Ⅱ),cobalt(Ⅱ)and nickel(Ⅱ)coordination polymers constructed from 5⁃(4⁃carboxyphenoxy)nicotinic acid

Three zinc(Ⅱ),cobalt(Ⅱ),and nickel(Ⅱ)coordination polymers,namely[Zn(μ^(3-)cpna)(μ-dpea)_(0.5)]_(n)(1),[Co(μ^(3-)cpna)(μ-dpey)_(0.5)]_(n)(2),and[Ni(μ^(3-)cpna)(μ-dpey)_(0.5)(H_(2)O)]_(n)(3),have been constructed hydrothermally using H_(2)cpna(5-(4-carboxyphenoxy)nicotinic acid),dpea(1,2-di(4-pyridyl)ethane),dpey(1,2-di(4-pyridyl)ethylene),and zinc,cobalt,and nickel chlorides at 160℃.The products were isolated as stable crystalline solids and were characterized by IR spectra,elemental analyses,thermogravimetric analyses,and single-crystal X-ray diffraction analyses.Single-crystal X-ray diffraction analyses revealed that three compounds crystallize in the triclinic system,space group P1.Compounds 1-3 show 2D layer structures.The catalytic activities in the Knoevenagel condensation reaction of these compounds were investigated.Compounds 1 and 2 exhibit effective catalytic activities in the Knoevenagel condensa-tion reaction at room temperature.For this reaction,various parameters were optimized,followed by the investiga-tion of the substrate scope.CCDC:2335676,1;2335677,2;2335678,3.

Influence of external nitrogen-containing donors on polymerization behavior of neodymium-based cis-1,4-polybutadiene rubber

Neodymium(Nd)-based catalyst in butadiene(Bd)polymerization has drawn interests due to its availability in affording higher cis-1,4-unit selectivity than transition metal(Ti,Co,Ni,etc.)-based catalysts[1-2].Such outstanding high cis-1,4-unit selecti-vity is hypothetically originated from the presence of 4 f orbitals,that can participate in monomer coordination and thereby govern subsequent enchainment manners.This unique characteristic also renders the active species highly susceptible to Lewis bases,and may impact the overall selectivity as well as polyme-rization behavior after coordination.Nevertheless,it is still a virgin area in such a field,and the influence of Lewis bases on Nd-based diene polymerizations is still a black box.Based on this consideration,how nitrogen-containing donors(D)impacts the overall behaviors of Nd-mediated Bd polymerizations is disclosed.

甲烷在钯基催化剂上脱氢的分子模拟

为探明甲烷在钯基二聚体催化剂上脱氢反应过程的微观机理,对甲烷燃烧催化剂的设计与使用提供指导。在M06L/6-311++G(d,p)+SDD//M06L/6-311G(d,p)+LANL2DZ基组水平上,采用密度泛函理论(DFT)对甲烷在钯基二聚体催化剂(Pd2、PdPt和PdNi)上的脱氢过程进行了研究。对比了甲烷在催化剂Pd2、PdPt和PdNi上反应的能垒(Eb)、活化能(Ea)及反应速率常数(k),结果表明:CH2→CH是甲烷在二聚体Pd2反应的速率控制步骤(RDS),而CH3→CH2是催化剂PdPt和PdNi反应的RDS;钯基二聚体催化剂对甲烷脱氢的催化活性顺序为PdPt>Pd2>PdNi;抗积炭性能顺序为PdNi>Pd2>PdPt。PdPt适用于要求催化效率较高的项目,而抗积炭性能较好的PdNi催化剂可用于大型工业催化。

新型脱碳木脂素类化合物合成方法与肿瘤抑制活性研究

利用Mn(Ⅱ)/Co(Ⅱ)/PhP(O)HOR/O2新催化体系合成了一系列新型脱碳木脂素类化合物(2a～2g),并采用MTT比色实验法,研究了所合成化合物体外抗肿瘤抑制活性.分别对人乳腺癌细胞(MCF-7),人肝癌细胞(Bel-7402),人肺癌(A549)和人子宫颈癌细胞(Hela)进行检测.结果表明:化合物2a～2g对4种癌细胞均有较强的抑制作用,尤其是对人肝癌细胞Bel-7402的抑制效果明显,其中化合物2b显示出比相同条件下紫杉醇更好地抗癌抑制活性(IC50:18.9μg/mL),说明所合成的芳基烯二聚化合物2b具有更好的应用前景。

Effect of TPB on curing reaction of HTPB-TDI

Catalysis effect of triphenyl bismuth （TPB） on kinetics of hydroxyl terminated polybutadiene-toluene diisocyanate （HTPB-TDI） curing reaction was studied by non-isothermal differential scanning calorimetry （DSC）. The characteristic temperature of curing system was measured for calculating kinetic parameters and establishing curing reaction kinetic equations. The results show that activation energy （Ea） of uncatalyzed HTPB-TDI curing system is 51.29 kJmol-1, and TPB decreases Ea to 46.43 kJ＇mol-1. Catalyst lowers reaction temperature and shortens curing time through decreasing ac- tivation energy of curing reaction and accelerating reaction rate. TPB can increase the reaction rate at 27 ℃ to the value of uncatalyzed system at 80 ℃. The catalytic activity reaches the maximum when concentration is 0.5 %.

Tunable activity of electrocatalytic CO dimerization on strained Cu surfaces:Insights from ab initio molecular dynamics simulations

Controlling catalytic activities through surface strain engineering remains a hot topic in electrocatalysis studies.Herein,ab initio molecular dynamics(AIMD)simulation associated with free energy sampling technology were performed to study the energetics of the key step of producing C2 products in electrocatalytic reduction of CO or CO_(2),i.e.CO dimerization,on strained Cu(100)with an explicit aqueous solvent model.It is worth mentioning that when compressive strain reaches a certain extent,the surface of Cu(100)will undergo reconstruction.We showed that,from tensile to compressive strain,the free energy barrier of CO dimerization decreased,suggesting that the activity of CO dimerization increases.It was also found that some of the reconstructed surfaces showing the lowest free energy barriers but might be less stable can be stabilized in the presence of adsorbed O or CO.Upon detailed quantitative analysis on the charges of surface Cu atoms,we found that the free energy barriers were strongly correlated with the charge of Cu atoms where the OCCO intermediate adsorbs.When the surfaces structures of Cu(100)were altered under compressive strain,the electronic structure of surface Cu atoms was monitored and thus the activity of electrocatalytic CO dimerization can be tuned.

Tri(4-methoxybenzyloxyl)(pentamethylcyclopentadienyl)titanium/Modified MAO Catalyzed Polymerization of 1-Butene

Tri(4-methoxy-1-benzyloxyl)(pentamethylcyclopentadienyl)titanium(Cp*Ti(OBzOCH3)3) in conjunction with modified methylalumoxane(mMAO) was an efficient catalyst for the living polymerization of butene-1. The steric and highly electron-releasing nature of the catalyst was probably responsible for the resulting polymers with high molecular weight and narrow molecular weight distribution(Mw/Mn=1.25 to 1.36). The effects of polymerization conditions on the catalytic activity, molecular weight and stereo-regularity of the products were investigated in detail. Especially, the content of TMA in MAO used in polymerization of butene-1 had a profound influence on polymer microstructure. The structural properties of the polybutene-1 product were characterized by 13 C NMR, GPC, DSC and WAXD. The results indicated that the polybutene-1 was isotacticity-rich(at 0 ℃, [mmmm] reached up to 60.3%) and the relative content of methylene pentad sequences [mmmm] of the polymer increased with a decreasing temperature.

Novel hydrazine-bridged covalent triazine polymer for CO_2 capture and catalytic conversion

Carbon dioxide（CO_2） capture and catalytic conversion has become an attractive and challenging strategy for CO_2 utilization since it is an abundant, inexpensive, and renewable C1 resource and a main greenhouse gas. Herein, a novel hydrazine-bridged covalent triazine polymer（HB-CTP） was first designed and synthesized through simple polymerization of cyanuric chloride with 2,4,6-trihydrazinyl-1,3,5-triazine. The resultant HB-CTP exhibited good CO_2 capture capacity（8.2 wt%, 0 °C, and 0.1 MPa） as well as satisfactory recyclability after five consecutive adsorption-desorption cycles. Such a polymer was subsequently employed as a metal-free heterogeneous catalyst for the cyclo-addition of CO_2 with various epoxides under mild and solvent-free conditions,affording cyclic carbonates with good to excellent yields（67%–99%） and high functional-group tolerance. The incorporation of hydrazine linkages into HB-CTP＇s architecture was suggested to play the key role in activating epoxides through hydrogen bonding. Moreover, HB-CTP can be reused at least five times without significant loss of its catalytic activity.

Study on Stability of Ion-exchange Resin Catalysts:Ⅱ. Desulfonation during Isobutylene Dimerization

The performance of ion-exchange resin catalysts during isobutene (IB) dimerization was investigated under different IB contents,temperatures and liquid-volume hourly space velocity (LHSV) using a plug flow reactor in the absence of any selectivity enhancing component.High IB content and temperature resulted in a high conversion and C12 selectivity bu low C8 selectivity.The influence of LHSV was related with the IB content:LHSV had great effect at high IB content,while the performance of ion-exchange resin changed little with LHSV if IB content was low.The effect of water on the stability of resins was also studied.Desulfonation was observed during the C4 dimerization reaction when water was added to the feed.Chlorinated resin was more stable than conventional polystyrene-based resins during the test.

LIGAND EFFECT OF CATALYTIC SYSTEM WCl_6-Et_2Al FOR RING OPENING METATHESIS POLYMERIZATION OF DICYCLOPENTADIENE

Ligand effect of the catalytic system WCl6-Et2AlCl for ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) was investigated. The experimental results show that adding sterically hindered phenol-2. 6-di-tert-butylcresylol(DTBC) in the catalytic system not only can obviously increase the monomer conversion of polymerization but also improve the mechanical properties, such as notched impact strength (NIS), tensile strength (TS) ect. 5 of the synthesized polyicycolpentadiene (PDCPD). A similar effect can be observed by using a sterically hindered polymeric phenol - linear phenol formaldehyde resin (LPF) as a ligand.

Synthesis of Novel Electron Donors and Their Application to Propylene Polymerization

A series of electron donors,including 1,1-cyclopentanecarboxylic acid diethyl ester (CPCADEE),1,1cyclopentanedimethanol acetic diester (CPDMAD),1,1-biethoxymethyl pentane (BEMP),2,2-diethyl diethylmalonate (DEDEM)and 2,2-diethyl-1,3-propanediol acetic diester (DEPDADE),were synthesized by diethyl malonate (DEM).The purities and structures of the above products were characterized by gas chromatography (GC) and gas chromatography-mass spectrometer (GC-MS),respectively.Furthermore,the possible optimal three-dimensional structures of these donors were simulated by means of Gaussian 03 and Chem 3D.Then these electron donors were coordinated with tetrachloro titanium (TiCl 4) and chloride magnesium (MgCl 2)to obtain the catalysts for the polymerization of propylene.The catalytic activities and properties of polypropylene are greatly improved by adding external donor(ED) when CPCADEE or DEPDADE is used as internal donor(ID).However,when BEMP was used as ID,the highest catalytic activity is obtained without adding ED,which can reduce production costs and simplify catalytic synthesis.The experiments indicate that BEMP has the shortest distance of oxygen atoms and the highest electronegativity.

Simultaneous Synthesis of Dimethyl Carbonate and Poly（ethylene terephthalate） Using Alkali Metals as Catalysts

Dimethyl carbonate （DMC） and poly（ethylene terephthalate） was simultaneously synthesized by the transesterification of ethylene carbonate （EC） with dimethyl terephthalate （DMT） in this paper. This reaction is an excellent green chemical process without poisonous substance. Various alkali metals were used as the catalysts. The results showed alkali metals had catalytic activity in a certain extent. The effect of reaction condition was also studied. When the reaction was carded out under the following conditions： the reaction temperature 250℃, molar ratio of EC to DMT 3 ： 1, reaction time 3h, and catalyst amount 0.004 （molar ratio to DMT）, the yield of DMC was 68.9%.

PREPARATION OF UREA NITROGEN ADSORBENT OF COMPLEX TYPE AND ADSORPTION CAPACITY OF UREA NITROGEN ONTO THE ADSORBENT

The urea nitrogen adsorbent of complex type, which consists of chitosan coated dialdehyde cellulose （CDAC） and immobilized urease in gelatin membrane （IE）, was prepared. The cellulose, the dialdehyde cellulose （DAC） and the CDAC were characterized by scanning electronic microscope. The results indicate that the cellulose C2-C3 bond was broken under the oxidation of periodate and it was oxidated to DAC. The DAC was coated with chitosan and the CDAC was obtained. The adsorption of urea nitrogen onto the adsorbent in Na2HPO4-NaH2PO4 buffer solution was studied in batch system. The effects of the experiment parameters, including degree of oxidation of CDAC, initial urea nitrogen concentration, pH and temperature, on the adsorption capacity of urea nitrogen onto the adsorbent at CDAC/IE weight ratio 10：1 were investigated. The results indicate that these parameters affected significantly the adsorption capacity. The adsorption capacity of urea nitrogen onto the adsorbent was 36.7 mg/g at the degree of oxidation of CDAC 88%, initial urea nitrogen concentration 600 mg/L, pH 7.4 and temperature 37℃.