Copolymer of acrylic acid and maleic acid(PMA)was used to remove Hg^2+from aqueous solution by complexation-ultrafiltration(C-UF)through rotating disk membrane(RDM).The effects of P/M(mass ratio of PMA to metal ions),...Copolymer of acrylic acid and maleic acid(PMA)was used to remove Hg^2+from aqueous solution by complexation-ultrafiltration(C-UF)through rotating disk membrane(RDM).The effects of P/M(mass ratio of PMA to metal ions),pH and rotation speed(N)on the interception of Hg^2+were investigated.The interception could reach 99.7%at pH 7.0,P/M 6 and N less than 1890 r/min.The shear stability of PMA-Hg complex was studied by RDM.The critical rotation speed,at which the interception starts to decrease,was 1890 r/min,and the critical shear rate,the smallest shear rate at which PMA-Hg complex begins to dissociate,was 2.50×10^5s^-1 at pH 7.0.Furthermore,the critical radii were obtained at different rotation speeds and pHs.The results showed that the critical radius decreased with the rotation speed and increased with pH.Shear induced dissociation coupling with ultra?ltration(SID-UF)was efficiently used to recover Hg^2+and PMA.展开更多
According to the cutting characteristics of progressive spiral movement by rotary cutting of the disc cutter, using the broken theory of interaction of compression and shearing, the three-axis force rotary cutting mec...According to the cutting characteristics of progressive spiral movement by rotary cutting of the disc cutter, using the broken theory of interaction of compression and shearing, the three-axis force rotary cutting mechanical model of disc cutter was established and the influence of installation radius, the phase difference and the cutter space on the mechanics of disc cutter were analyzed. The results show that on the same radial line of tunneling interface, the boring distance of cutting tools installed on a different radius is not equal. The cutting radial line of tunneling interface is a polyline and its height is determined by phase angle and penetration of cutting tools. Both phase difference and the installation radius between adjacent disc cutters have little effect on the vertical force and rolling force, but increase with the increase in cutter spacing. In addition, when increasing phase difference and cutter space bilaterally, and reducing installation radius simultaneously, the lateral force would be improved. Related results have been verified onl O0 t rotary tool cutting test platform.展开更多
Objective To describe the CT features of abdominal Castleman's disease(CD)in adolescent.Methods Abdomen CT of four adolescents ranging in age from 7 years to 17 years diagnosed as abdominal region CD were reviewed...Objective To describe the CT features of abdominal Castleman's disease(CD)in adolescent.Methods Abdomen CT of four adolescents ranging in age from 7 years to 17 years diagnosed as abdominal region CD were reviewed.One case was retroperitoneal CD;one case was lesser omentum CD;and the other two cases were mesenteric CD.Three of four cases underwent post enhancement,and one case was only done no contrast CT as the reason of media hypersusceptibility.One case underwent needle biopsy.Three cases were removed by surgical resection.Results Isolated or multiple well-defined homogenous masses with homogenously enhanced after underwent enhancement was the common finding in these four cases.Conclusion Recognition of the CT features and highlights the histological specimen of CD is helpful to diagnose CD.展开更多
Since the fouling-releasing ability of silicone elastomers increased as their modulus decreases, we designed and prepared composites with embedded tiny NaC1 crytals that were soluble after their immersion in water, re...Since the fouling-releasing ability of silicone elastomers increased as their modulus decreases, we designed and prepared composites with embedded tiny NaC1 crytals that were soluble after their immersion in water, resulting in water-filled porous elastomers. The scanning electron microscope images confirmed such a designed water-filling porous structure. The existence of many micro-drops of water in these specially designed elastomers decreased the shear storage modulus and increased the loss factors. The decrease of shear modulus plays a leading role here and is directly related to a lower critical peeling-off stress of a pseudo-barnacle on them. Therefore, such a novel preparation with cheap salts instead of an expensive silicone provides a better way to make fouling-release paints with a lower modulus, a lower critical peeling-off stress and a better fouling-release property without a significant decrease of the cross-linking density.展开更多
基金Project(21476265)supported by the National Natural Science Foundation of China。
文摘Copolymer of acrylic acid and maleic acid(PMA)was used to remove Hg^2+from aqueous solution by complexation-ultrafiltration(C-UF)through rotating disk membrane(RDM).The effects of P/M(mass ratio of PMA to metal ions),pH and rotation speed(N)on the interception of Hg^2+were investigated.The interception could reach 99.7%at pH 7.0,P/M 6 and N less than 1890 r/min.The shear stability of PMA-Hg complex was studied by RDM.The critical rotation speed,at which the interception starts to decrease,was 1890 r/min,and the critical shear rate,the smallest shear rate at which PMA-Hg complex begins to dissociate,was 2.50×10^5s^-1 at pH 7.0.Furthermore,the critical radii were obtained at different rotation speeds and pHs.The results showed that the critical radius decreased with the rotation speed and increased with pH.Shear induced dissociation coupling with ultra?ltration(SID-UF)was efficiently used to recover Hg^2+and PMA.
基金Project(2007CB714002) supported by the National Basic Research Program of ChinaProject(51074180) supported by the National Natural Science Foundation of ChinaProject(2010FJ1002) supported by Hunan Municipal Science and Technology Program,China
文摘According to the cutting characteristics of progressive spiral movement by rotary cutting of the disc cutter, using the broken theory of interaction of compression and shearing, the three-axis force rotary cutting mechanical model of disc cutter was established and the influence of installation radius, the phase difference and the cutter space on the mechanics of disc cutter were analyzed. The results show that on the same radial line of tunneling interface, the boring distance of cutting tools installed on a different radius is not equal. The cutting radial line of tunneling interface is a polyline and its height is determined by phase angle and penetration of cutting tools. Both phase difference and the installation radius between adjacent disc cutters have little effect on the vertical force and rolling force, but increase with the increase in cutter spacing. In addition, when increasing phase difference and cutter space bilaterally, and reducing installation radius simultaneously, the lateral force would be improved. Related results have been verified onl O0 t rotary tool cutting test platform.
文摘Objective To describe the CT features of abdominal Castleman's disease(CD)in adolescent.Methods Abdomen CT of four adolescents ranging in age from 7 years to 17 years diagnosed as abdominal region CD were reviewed.One case was retroperitoneal CD;one case was lesser omentum CD;and the other two cases were mesenteric CD.Three of four cases underwent post enhancement,and one case was only done no contrast CT as the reason of media hypersusceptibility.One case underwent needle biopsy.Three cases were removed by surgical resection.Results Isolated or multiple well-defined homogenous masses with homogenously enhanced after underwent enhancement was the common finding in these four cases.Conclusion Recognition of the CT features and highlights the histological specimen of CD is helpful to diagnose CD.
文摘Since the fouling-releasing ability of silicone elastomers increased as their modulus decreases, we designed and prepared composites with embedded tiny NaC1 crytals that were soluble after their immersion in water, resulting in water-filled porous elastomers. The scanning electron microscope images confirmed such a designed water-filling porous structure. The existence of many micro-drops of water in these specially designed elastomers decreased the shear storage modulus and increased the loss factors. The decrease of shear modulus plays a leading role here and is directly related to a lower critical peeling-off stress of a pseudo-barnacle on them. Therefore, such a novel preparation with cheap salts instead of an expensive silicone provides a better way to make fouling-release paints with a lower modulus, a lower critical peeling-off stress and a better fouling-release property without a significant decrease of the cross-linking density.
