Indentation test and bending test were adopted to investigate permanent deformation and deformation compliance of guss-asphalt for orthotropic steel deck plate. Factors of mastic Epure content, fine to coarse aggregat...Indentation test and bending test were adopted to investigate permanent deformation and deformation compliance of guss-asphalt for orthotropic steel deck plate. Factors of mastic Epure content, fine to coarse aggregate proportion, temperature and loading pressure were investigated. It is pointed out that mastic Epure content, temperature and loading pressure are the main factors influencing permanent deformation of guss-asphalt; fine to coarse aggregate proportion influences its maximum bending strain and crack energy at low temperature. The results indicate that there exists an optimum mastic Epure content, and a critical operation temperature as well as a critical loading pressure for guss-asphalt in operation.展开更多
The density of asphalt was measured with the pycnometer and densitometer. Creep properties of the asphalt were investigated with the bending beam rheometer at temperatures ranging from 0 ~C to -36 ~C. The asphalt dens...The density of asphalt was measured with the pycnometer and densitometer. Creep properties of the asphalt were investigated with the bending beam rheometer at temperatures ranging from 0 ~C to -36 ~C. The asphalt density data used to correlate with the creep properties were calculated from the regression equation of density and temperature. The asphalt sample used to determine the creep property was aged by the standard RTFOT test and the PAV test. The test results showed that the asphalt density had a linear relationship with temperature changes. The logarithm of the creep stiffness and the slope of the logarithm of the stiffness at 60 seconds all demonstrated a linear relationship with the density, and the regression coefficient of these data was around 0.99. The creep stiffness and the slope of the creep stiffness can be calculated from the asphalt density at the same temperature.展开更多
In this paper, in order to investigate the viscoelasticity of asphalt binder at the softening point temperature, more than 30 different asphalt binders were selected and tested by dynamic rheological scan method using...In this paper, in order to investigate the viscoelasticity of asphalt binder at the softening point temperature, more than 30 different asphalt binders were selected and tested by dynamic rheological scan method using a dynamic shear rheometer(DSR). The softening points and the rheological parameters of the asphalt samples were measured and analyzed. The results indicated that at the softening point temperature the neat asphalt and the SBS modified asphalt showed two different rheological states. The neat asphalt binders had a majority of viscous components in viscoelastic composition, with the phase angles being mostly higher than 80 o. The SBS modified binders had lower phase angles, with their elasticity still retained. Meanwhile, the Shapiro-Wilk normality test showed that at a confidence level of 0.05, at whatever aging state, the neat asphalt had a stable complex modulus corresponding to the softening point, which was 13.034 kPa at a standard deviation of 2.105 kPa under the same test condition. The softening point of neat asphalt binder can be calculated via the equivalent modulus rule. It is found out that there is a good relationship between the calculated and the measured softening points. And it is suggested that more data are needed to validate this finding.展开更多
The main objective of this work is to propose new mixture response parameters and to compare correlations with rut depths and sensitivity of permanent deformation response parameters based on field extracted cores and...The main objective of this work is to propose new mixture response parameters and to compare correlations with rut depths and sensitivity of permanent deformation response parameters based on field extracted cores and lab-mixed duplicates. A new "mix-confined" test is developed and four new parameters for this test are proposed. Correlation coefficients with rut depths and coefficients of variation (sensitivity) are compared between the four new and two existing parameters. Some parameters are recommended to be used for the newly developed test. The results show that, newly developed test can capture the changes of permanent deformation of asphalt mixtures. Only one new parameter (D1 of Stephen Price model) and one existing parameter (flow number, Fn ) have strong correlations with rut depths of asphalt pavements (R2 greater than 0.7) and have relative small sensitivity (coefficient of variation, COV, less than 30%). For polymer modified asphalt mixtures, the parameter D1 rather than Fn should be used. These findings can be used to check the permanent deformation of asphalt mixture during the mix design.展开更多
A novel engineered cementitious composite(ECC) was prepared with the complex binder of Portland cement and asphalt emulsion.By adjusting the amount of asphalt emulsion,different mixture proportions were adopted in exp...A novel engineered cementitious composite(ECC) was prepared with the complex binder of Portland cement and asphalt emulsion.By adjusting the amount of asphalt emulsion,different mixture proportions were adopted in experiments,including four-point bending test,compressive test,and scanning electric microscopy(SEM).The SEM observation was conducted to evaluate the contribution of polyvinyl alcohol(PVA) fiber and asphalt emulsion to the composite toughening mechanism.The tests results show that the most remarkable deflection-hardening behavior and saturated multiple cracking are achieved when the content of asphalt emulsion is 10%.However,excessive content of asphalt emulsion causes severe damages on the deformation behavior as well as loss in compressive strength of the mixture.SEM observation indicates that the influence of asphalt emulsion on the fiber/matrix interfacial property changes the dominant fiber failure type from rupture into pull-out mode,and thus causes beneficial effects for strain-hardening behavior.展开更多
For the most coastal areas where the air is very humid,study on the effect of humidity on the performance of asphalt has its practical significance.However,limited research has been done to investigate the effect of h...For the most coastal areas where the air is very humid,study on the effect of humidity on the performance of asphalt has its practical significance.However,limited research has been done to investigate the effect of humidity on rheological properties of asphalt.In this study,asphalt binders were aged in the pressure aging vessel(PAV)under different conditions of moisture and aging time.Then Dynamic Shear Rheometer(DSR)and Bending Beam Rheometer(BBR)measurements were conducted to obtain the parameters relating to the complex modulus,phase angle,failure temperature,and creep stiffness.It was found that the low temperature performance decreased as evidenced by the results of the creep stiffness.While there were no significant differences among conditioned binders based on complex modulus G*and phase angleδ,it was found that theδvalue increased when the humidity increased from 0% to 80% ,and then theδvalue decreased when the humidity increased to 100% .In addition,the results of the failure temperature indicated that the humidity of 80% would be a critical point for the high temperature performance of the asphalt binders.展开更多
This paper simulated the ultraviolet aging process of asphalt and used dynamic mechanic analysis （DMA） method to evaluate the effect of ultraviolet aging on the asphalt theological properties. After having experienc...This paper simulated the ultraviolet aging process of asphalt and used dynamic mechanic analysis （DMA） method to evaluate the effect of ultraviolet aging on the asphalt theological properties. After having experienced ultravio- let aging, the low temperature performance of asphalt binder decreased significantly, with its complex modulus increased and phase angle decreased along with changing rheological properties as compared to the performance of original asphalt binder. The ultraviolet aging process would make asphalt binder more sensitive to brittle and fatigue failure. On the basis of the time-temperature superposition principle （TTSP）, the viscoelastic transition frequency （coT） is proposed to evaluate the effect of ultraviolet aging. It is found that with the increase in ultraviolet aging time, the cox moves to the lower frequency range gradually. Since the viscoelastic transition frequency is sensitive to the effect of aging, it can be used as an indicator of ultraviolet aging.展开更多
文摘Indentation test and bending test were adopted to investigate permanent deformation and deformation compliance of guss-asphalt for orthotropic steel deck plate. Factors of mastic Epure content, fine to coarse aggregate proportion, temperature and loading pressure were investigated. It is pointed out that mastic Epure content, temperature and loading pressure are the main factors influencing permanent deformation of guss-asphalt; fine to coarse aggregate proportion influences its maximum bending strain and crack energy at low temperature. The results indicate that there exists an optimum mastic Epure content, and a critical operation temperature as well as a critical loading pressure for guss-asphalt in operation.
文摘The density of asphalt was measured with the pycnometer and densitometer. Creep properties of the asphalt were investigated with the bending beam rheometer at temperatures ranging from 0 ~C to -36 ~C. The asphalt density data used to correlate with the creep properties were calculated from the regression equation of density and temperature. The asphalt sample used to determine the creep property was aged by the standard RTFOT test and the PAV test. The test results showed that the asphalt density had a linear relationship with temperature changes. The logarithm of the creep stiffness and the slope of the logarithm of the stiffness at 60 seconds all demonstrated a linear relationship with the density, and the regression coefficient of these data was around 0.99. The creep stiffness and the slope of the creep stiffness can be calculated from the asphalt density at the same temperature.
基金financially supported by the Shandong Natural Science Foundation (ZR2009FL020)the Shandong Transportation Innovation Foundation (2010Y20)
文摘In this paper, in order to investigate the viscoelasticity of asphalt binder at the softening point temperature, more than 30 different asphalt binders were selected and tested by dynamic rheological scan method using a dynamic shear rheometer(DSR). The softening points and the rheological parameters of the asphalt samples were measured and analyzed. The results indicated that at the softening point temperature the neat asphalt and the SBS modified asphalt showed two different rheological states. The neat asphalt binders had a majority of viscous components in viscoelastic composition, with the phase angles being mostly higher than 80 o. The SBS modified binders had lower phase angles, with their elasticity still retained. Meanwhile, the Shapiro-Wilk normality test showed that at a confidence level of 0.05, at whatever aging state, the neat asphalt had a stable complex modulus corresponding to the softening point, which was 13.034 kPa at a standard deviation of 2.105 kPa under the same test condition. The softening point of neat asphalt binder can be calculated via the equivalent modulus rule. It is found out that there is a good relationship between the calculated and the measured softening points. And it is suggested that more data are needed to validate this finding.
基金Project(08Y038) supported by Jiangsu Transportation Engineering Construction Bureau,China
文摘The main objective of this work is to propose new mixture response parameters and to compare correlations with rut depths and sensitivity of permanent deformation response parameters based on field extracted cores and lab-mixed duplicates. A new "mix-confined" test is developed and four new parameters for this test are proposed. Correlation coefficients with rut depths and coefficients of variation (sensitivity) are compared between the four new and two existing parameters. Some parameters are recommended to be used for the newly developed test. The results show that, newly developed test can capture the changes of permanent deformation of asphalt mixtures. Only one new parameter (D1 of Stephen Price model) and one existing parameter (flow number, Fn ) have strong correlations with rut depths of asphalt pavements (R2 greater than 0.7) and have relative small sensitivity (coefficient of variation, COV, less than 30%). For polymer modified asphalt mixtures, the parameter D1 rather than Fn should be used. These findings can be used to check the permanent deformation of asphalt mixture during the mix design.
基金Project(2011BAE27B04)supported by the National Key Technology R&D Program of ChinaProjects(CHD2011TD003,CHD2011ZD017)supported by the Special Fund for Basic Scientific Research of Central Colleges in Chang’an University,China
文摘A novel engineered cementitious composite(ECC) was prepared with the complex binder of Portland cement and asphalt emulsion.By adjusting the amount of asphalt emulsion,different mixture proportions were adopted in experiments,including four-point bending test,compressive test,and scanning electric microscopy(SEM).The SEM observation was conducted to evaluate the contribution of polyvinyl alcohol(PVA) fiber and asphalt emulsion to the composite toughening mechanism.The tests results show that the most remarkable deflection-hardening behavior and saturated multiple cracking are achieved when the content of asphalt emulsion is 10%.However,excessive content of asphalt emulsion causes severe damages on the deformation behavior as well as loss in compressive strength of the mixture.SEM observation indicates that the influence of asphalt emulsion on the fiber/matrix interfacial property changes the dominant fiber failure type from rupture into pull-out mode,and thus causes beneficial effects for strain-hardening behavior.
基金supported by the National Natural Science Fund Project of China(NSFC)(No.:51278173)the Natural Science Fund Project of Jiangsu Provincial Communications Department(No.:SBK201120606)
文摘For the most coastal areas where the air is very humid,study on the effect of humidity on the performance of asphalt has its practical significance.However,limited research has been done to investigate the effect of humidity on rheological properties of asphalt.In this study,asphalt binders were aged in the pressure aging vessel(PAV)under different conditions of moisture and aging time.Then Dynamic Shear Rheometer(DSR)and Bending Beam Rheometer(BBR)measurements were conducted to obtain the parameters relating to the complex modulus,phase angle,failure temperature,and creep stiffness.It was found that the low temperature performance decreased as evidenced by the results of the creep stiffness.While there were no significant differences among conditioned binders based on complex modulus G*and phase angleδ,it was found that theδvalue increased when the humidity increased from 0% to 80% ,and then theδvalue decreased when the humidity increased to 100% .In addition,the results of the failure temperature indicated that the humidity of 80% would be a critical point for the high temperature performance of the asphalt binders.
基金supported by the National Natural Science Foundation of China(NNSFC,Grant No.50808058)the New Century Excellent Talents in University,2007(NCETU)+1 种基金the National Science Foundation for Post-doctoral Scientists of China(NSFPSC,Grant No.20080430925)the Specialized Research Fund for the Doctoral Program of Higher Education of China(SRFDPHEC,Grant No.200902403)
文摘This paper simulated the ultraviolet aging process of asphalt and used dynamic mechanic analysis （DMA） method to evaluate the effect of ultraviolet aging on the asphalt theological properties. After having experienced ultravio- let aging, the low temperature performance of asphalt binder decreased significantly, with its complex modulus increased and phase angle decreased along with changing rheological properties as compared to the performance of original asphalt binder. The ultraviolet aging process would make asphalt binder more sensitive to brittle and fatigue failure. On the basis of the time-temperature superposition principle （TTSP）, the viscoelastic transition frequency （coT） is proposed to evaluate the effect of ultraviolet aging. It is found that with the increase in ultraviolet aging time, the cox moves to the lower frequency range gradually. Since the viscoelastic transition frequency is sensitive to the effect of aging, it can be used as an indicator of ultraviolet aging.
