Small multi-turn coil devices are used with the transient electromagnetic method （TEM） in areas with limited space, particularly in underground environments such as coal mines roadways and engineering tunnels, and f...Small multi-turn coil devices are used with the transient electromagnetic method （TEM） in areas with limited space, particularly in underground environments such as coal mines roadways and engineering tunnels, and for detecting shallow geological targets in environmental and engineering fields. However, the equipment involved has strong mutual inductance coupling, which causes a lengthy turn-off time and a deep “blind zone”. This study proposes a new transmitter device with a conical-shape source and derives the radius formula of each coil and the mutual inductance coefficient of the cone. According to primary field characteristics, results of the two fields created, calculation of the conical-shaped source in a uniform medium using theoretical analysis, and a comparison of the inductance of the new device with that of the multi-turn coil, show that inductance of the multi-turn coil is nine times greater than that of the conical source with the same equivalent magnetic moment of 926.1 A·m2. This indicates that the new source leads to a much shallower “blind zone.” Furthermore, increasing the bottom radius and turn of the cone creates a larger mutual inductance but increasing the cone height results in a lower mutual inductance. Using the superposition principle, the primary and secondary magnetic fields for a conical source in a homogeneous medium are calculated; results indicate that the magnetic behavior of the cone is the same as that of the multi-turn coils, but the transient responses of the secondary field and the total field are more stronger than those of the multi-turn coils. To study the transient response characteristics using a cone-shaped source in a layered earth, a numerical filtering algorithm is then developed using the fast Hankel transform and the improved cosine transform, again using the superposition principle. During development, an average apparent resistivity inverted from the induced electromotive force using each coil is defined to represent the comprehensive resistivity of the conical source. To verify the forward calculation method, the transient responses of H type models and KH type models are calculated, and data are inverted using a “smoke ring” inversion. The results of inversion have good agreement with original models and show that the forward calculation method is effective. The results of this study provide an option for solving the problem of a deep “blind zone” and also provide a theoretical indicator for further research.展开更多
A dense seismic network was installed in the capital region of China in recent years,which makes it possible to resolve the focal mechanisms of small earthquakes. We gathered large earthquake focal mechanisms from the...A dense seismic network was installed in the capital region of China in recent years,which makes it possible to resolve the focal mechanisms of small earthquakes. We gathered large earthquake focal mechanisms from the last fifty years and moderate or small earthquake focal mechanisms from between 2002 and 2004,and calculated the present tectonic stress field of the capital region by the grid search method, which weighs different sized earthquakes and can improve the accuracy of the stress field inversion. The analysis of inversion results of different sub-regions shows that the azinuth of the maximum principal compressive stress axis is NE43°- 86° in the Beijing-Zhangjiakou-Datong area,NE38°-86° in the Tangshan area,and NE79°- 81° in the Xingtai area. Inversion results of this paper are similar to previous results,which proves the correctness of the approach. As revealed by the results,the stress field of the capital region is characterized by overall consistency and sub-regional differences. This study provides reference for earthquake mechanism explanation and geodynamics research.展开更多
基金supported by the National Natural Science Foundation of China(Nos.41564001 and 41572185)the Natural Science Foundation of Jiangxi Province(No.20151BAB203045)
文摘Small multi-turn coil devices are used with the transient electromagnetic method （TEM） in areas with limited space, particularly in underground environments such as coal mines roadways and engineering tunnels, and for detecting shallow geological targets in environmental and engineering fields. However, the equipment involved has strong mutual inductance coupling, which causes a lengthy turn-off time and a deep “blind zone”. This study proposes a new transmitter device with a conical-shape source and derives the radius formula of each coil and the mutual inductance coefficient of the cone. According to primary field characteristics, results of the two fields created, calculation of the conical-shaped source in a uniform medium using theoretical analysis, and a comparison of the inductance of the new device with that of the multi-turn coil, show that inductance of the multi-turn coil is nine times greater than that of the conical source with the same equivalent magnetic moment of 926.1 A·m2. This indicates that the new source leads to a much shallower “blind zone.” Furthermore, increasing the bottom radius and turn of the cone creates a larger mutual inductance but increasing the cone height results in a lower mutual inductance. Using the superposition principle, the primary and secondary magnetic fields for a conical source in a homogeneous medium are calculated; results indicate that the magnetic behavior of the cone is the same as that of the multi-turn coils, but the transient responses of the secondary field and the total field are more stronger than those of the multi-turn coils. To study the transient response characteristics using a cone-shaped source in a layered earth, a numerical filtering algorithm is then developed using the fast Hankel transform and the improved cosine transform, again using the superposition principle. During development, an average apparent resistivity inverted from the induced electromotive force using each coil is defined to represent the comprehensive resistivity of the conical source. To verify the forward calculation method, the transient responses of H type models and KH type models are calculated, and data are inverted using a “smoke ring” inversion. The results of inversion have good agreement with original models and show that the forward calculation method is effective. The results of this study provide an option for solving the problem of a deep “blind zone” and also provide a theoretical indicator for further research.
基金sponsored by the Special Fund of Fundamental Scientific Research Operating Expenses for Higher School of Central Government(Projects for creation teams ZY20110101)the Special Fund for the Earthquake Scientific Research of China(201208009)National Natural Science Foundation of China(41074072)
文摘A dense seismic network was installed in the capital region of China in recent years,which makes it possible to resolve the focal mechanisms of small earthquakes. We gathered large earthquake focal mechanisms from the last fifty years and moderate or small earthquake focal mechanisms from between 2002 and 2004,and calculated the present tectonic stress field of the capital region by the grid search method, which weighs different sized earthquakes and can improve the accuracy of the stress field inversion. The analysis of inversion results of different sub-regions shows that the azinuth of the maximum principal compressive stress axis is NE43°- 86° in the Beijing-Zhangjiakou-Datong area,NE38°-86° in the Tangshan area,and NE79°- 81° in the Xingtai area. Inversion results of this paper are similar to previous results,which proves the correctness of the approach. As revealed by the results,the stress field of the capital region is characterized by overall consistency and sub-regional differences. This study provides reference for earthquake mechanism explanation and geodynamics research.
