快开盲板电测应力实验及有限元分析

为了解决液化天然气(Liquefied Natural Gas, LNG)接收站大型高压快开盲板国产化的技术难题,对压力环型快开盲板(PN15 MPa DN1 300 mm)开展电测应力实验,并与有限元分析结果进行对比,验证了有限元模型的正确性。将有限元分析结果采用应力分类法和弹—塑性分析法分别进行强度校核,并利用有限元模型对快开盲板头盖厚度进行了优化。结果表明,压力环型快开盲板密封良好,各部件强度满足要求,优化后的头盖能满足强度要求。分析结果可为今后大型高压快开盲板的国产化设计提供借鉴。

Dynamic Phase Field Description on Ductile Fracture Process

In comparison to discrete descriptions of fracture process,the recently proposed phase field methodology averts the numerical tracking strategy of discontinuities in solids,which enables the numerical implement simplification.An implicit finite element formulation based on the diffuse phase field is extended for stable and efficient analysis of complex dynamic fracture process in ductile solids.This exhibited formulation is shown to capture entire range of the characteristics of ductile material presenting J2-plasticity,embracing plasticization,cracks initiation,propagation,branching and merging while fulfilling the basic principle of thermodynamics.Herein,we implement a staggered time integration scheme of the dynamic elasto-plastic phase field method into the commercial finite element code.The numerical performance of the present advanced phase field model has been examined through several classic dynamic fracture benchmarks,and in all cases simulation results are in good agreement with the associated experimental data and other numerical results in previous literature.

Application of laminated vierendeel truss in high-position transfer story structure

To meet the demands for large space and flexible compartmentation ofbuildings, laminated vierendeel trasses are adopted in high-position transfer story structures.First the bearing characteristics are analyzed, in which reasonable stiffness ratio of the upperchord, middle chord, and lower chord is derived. Then combined with an actual engineering model (1:8similar ratio), the static loading and pseudo-dynamic tests of two models for laminated vierendeeltrass used in transfer story structures are conducted, in which one model adopts reinforcedconcrete, and the other adopts prestressed concrete and shape steel concrete. Seismic behaviors areanalyzed, including inter-story displacement, base shear-displacement skeleton curves, andequivalent viscosity-damping curves. A program is programmed to carry out the elasto-plastic dynamicanalysis, and displacement time-history curves of the two models are derived. The test and analysisresults show that the laminated vierendeel trass with prestressed concrete and shape steel concretehas excellent seismic behaviors. It can solve the disadvantages of laminated vierendeel trussesused in transfer story structures. Finally, some design suggestions are put forward, which can bereferenced by similar engineering.

Mechanical mechanism analysis of tension type anchor based on shear displacement method

Based on the fact that the shear stress along anchorage segment is neither linearly nor uniformly distributed, the load transfer mechanism of the tension type anchor was studied and the mechanical characteristic of anchorage segment was analyzed. Shear stress?strain relationship of soil surrounding anchorage body was simplified into three-folding-lines model consisting of elastic phase, elasto-plastic phase and residual phase considering its softening characteristic. Meanwhile, shear displacement method that has been extensively used in the analysis of pile foundation was introduced. Based on elasto-plastic theory, the distributions of displacement, shear stress and axial force along the anchorage segment of tension type anchor were obtained, and the formula for calculating the elastic limit load was also developed accordingly. Finally, an example was given to discuss the variation of stress and displacement in the anchorage segment with the loads exerted on the anchor, and a program was worked out to calculate the anchor maximum bearing capacity. The influence of some parameters on the anchor bearing capacity was discussed, and effective anchorage length was obtained simultaneously. The results show that the shear stress first increases and then decreases and finally trends to the residual strength with increase of distance from bottom of the anchorage body, the displacement increases all the time with the increase of distance from bottom of the anchorage body, and the increase of velocity gradually becomes greater.

Finite element analysis on thermal upheaval buckling of submarine burial pipelines with initial imperfection

In-service hydrocarbons must be transported at high temperature and high pressure to ease the flow and prevent the solidification of the wax fraction. The pipeline containing hot oil will expand longitudinally due to the rise in temperature. If such expansion is resisted, for example by frictional effects over a kilometer or so of pipeline, compressive axial stress will be built up in the pipe-wall. The compressive forces are often so large that they induce vertical buckling of buffed pipelines, which can jeopardize the structural integrity of the pipeline. A typical initial imperfection named continuous support mode of submarine pipeline was studied. Based on this type of initial imperfection, the analytical solution of vertical thermal buckling was introduced and an elastic-plasticity finite element analysis （FEA） was developed. Both the analytical and the finite element methodology were applied to analyze a practice in Bohai Gulf, China. The analyzing results show that upheaval buckling is most likely to build up from the initial imperfection of the pipeline and the buckling temperature depends on the amplitude of initial imperfection. With the same amplitude of initial imperfection, the triggering temperature difference of upheaval buckling increases with covered depth of the pipeline, the soil strength and the friction between the pipeline and subsoil.

Elastic-plastic study on high building with SRC transferring story

A new type of transferring structure for steel reinforced concrete (SRC) beams is used in high building. The pushover analysis method was used to study the failure mechanism and ductility of SRC transferring structure through consulting pseudo-static test results for the structure. And, the occurrence order and position of the plastic hinge, the weak story and seismic capacity of high building with SRC transferring story were also studied through consulting shaking table test results for the high building, showing that the seismic behavior of high building with SRC transferring story is good.

Limit analysis of vertical anti-pulling screw pile group under inclined loading on 3D elastic-plastic finite element strength reduction method

Based on the functional theory, catastrophe theory, simultaneity principle and the idea of strength reduction method （SRM）, the bearing capacity functional anti SRM of pile group foundation were established, and the criteria of ultimate load and the concept of safety storage coefficient （Css） were advanced. The inclined ultimate loads by the static loading test, load increment method （LIM） and SRM are compared. Theoretically, the ultimate load of piles does not change with the loading levels when it is calculated by SRM. When the one strength reduction parameter is applied in the calculation boundary, there are calculating errors because the bearing capacity action of soils happened in the finite zone. The inclined 10adings are 108, 132 and 144 kN, and SSC are 1.07, 0.94 and 0.79, respectively, so the calculation values of ultimate loads are about 115.56, 124.08 and 113.76 kN, respectively. The error between calculations and observation values is less than 6%. But .the error between calculations of LIM and observations is 20%. Because of the effect of inclined loading, the push-rotation phenomenon of screw pile group appears. Under this testing, the ultimate bearing capacity of piles is mostly determined by the horizontal ultimate bearing capacity, and the effect of the vertical component of inclined load should also be considered.

Influence of features of natural soft clay on behaviour of embankment

The influence of different features of natural soft clays,namely anisotropy,destructuration and viscosity,on modelling the time-dependent behaviour of Murro embankment was investigated.The newly developed elasto-viscoplastic models were enhanced for determining viscosity parameters in a straightforward way and adopted for the finite element analysis.The same set of common parameters determined from conventional triaxial and oedometer tests was employed for all models,with additional parameters required for representing different soil features.The finite element predictions by using models coupled with BIOT's consolidation theory were compared with each other and with field data for settlement,horizontal displacement and excess pore pressures.In addition,the stress paths under the embankment loading were also compared with each other to improve the understanding of the effect of different soil features.All simulations demonstrate that all three features significantly influence the predictions.As a consequence,accounting for soil features needs to be carefully considered when they are applied to a construction site.

Stability analysis of slope in strain-softening soils using local arc-length solution scheme

Soils with strain-softening behavior — manifesting as a reduction of strength with increasing plastic strain — are commonly found in the natural environment. For slopes in these soils,a progressive failure mechanism can occur due to a reduction of strength with increasing strain. Finite element method based numerical approaches have been widely performed for simulating such failure mechanism,owning to their ability for tracing the formation and development of the localized shear strain. However,the reliability of the currently used approaches are often affected by poor convergence or significant mesh-dependency,and their applicability is limited by the use of complicated soil models. This paper aims to overcome these limitations by developing a finite element approach using a local arc-length controlled iterative algorithm as the solution strategy. In the proposed finite element approach,the soils are simulated with an elastoplastic constitutive model in conjunction with the Mohr-Coulomb yield function. The strain-softening behavior is represented by a piece-wise linearrelationship between the Mohr-Coulomb strength parameters and the deviatoric plastic strain. To assess the reliability of the proposed finite element approach,comparisons of the numerical solutions obtained by different finite element methods and meshes with various qualities are presented. Moreover,a landslide triggered by excavation in a real expressway construction project is analyzed by the presented finite element approach to demonstrate its applicability for practical engineering problems.

Near-fault directivity pulse-like ground motion effect on high-speed railway bridge

The vehicle-track-bridge(VTB)element was used to investigate how a high-speed railway bridge reacted when it was subjected to near-fault directivity pulse-like ground motions.Based on the PEER NAG Strong Ground Motion Database,the spatial analysis model of a vehicle-bridge system was developed,the VTB element was derived to simulate the interaction of train and bridge,and the elasto-plastic seismic responses of the bridge were calculated.The calculation results show that girder and pier top displacement,and bending moment of the pier base increase subjected to near-fault directivity pulse-like ground motion compared to far-field earthquakes,and the greater deformation responses in near-fault shaking are associated with fewer reversed cycles of loading.The hysteretic characteristics of the pier subjected to a near-fault directivity pulse-like earthquake should be explicitly expressed as the bending moment-rotation relationship of the pier base,which is characterized by the centrally strengthened hysteretic cycles at some point of the loading time-history curve.The results show that there is an amplification of the vertical deflection in the girder's mid-span owing to the high vertical ground motion.In light of these findings,the effect of the vertical ground motion should be used to adjust the unconservative amplification constant 2/3 of the vertical-to-horizontal peak ground motion ratio in the seismic design of bridge.

Axial compressive behavior and design method of tubed circular steel reinforced concrete short columns

To study the behavior and design of tubed circular steel reinforced concrete (TCSRC) short column under axial compressive loads, a nonlinear finite element model (FEM) has been developed to simulate this kind of structure. Depending on the FEM results, an elastic-plastic analysis was carried out to clarify the status of steel tube, then a simplified procedure was proposed to predict the compressive axial load strength. The results obtained from this procedure were compared with the test results. It is found that they agree well each other.

Stability and reinforcement analysis of rock slope based on elasto-plastic finite element method

The rigid body limit equilibrium method(RBLEM) and finite element method(FEM) are two widely used approaches for rock slope's stability analysis currently. RBLEM introduced plethoric assumptions; while traditional FEM relied on artificial factors when determining factor of safety(FOS) and sliding surfaces. Based on the definition of structure instability that an elasto-plastic structure is not stable if it is unable to satisfy simultaneously equilibrium condition, kinematical admissibility and constitutive equations under given external loads, deformation reinforcement theory(DRT) is developed. With this theory, plastic complementary energy(PCE) can be used to evaluate the overall stability of rock slope, and the unbalanced force beyond the yield surface could be the identification of local failure. Compared with traditional slope stability analysis approaches, the PCE norm curve to strength reduced factor is introduced and the unbalanced force is applied to the determination of key sliding surfaces and required reinforcement. Typical and important issues in rock slope stability are tested in TFINE(a three-dimensional nonlinear finite element program), which is further applied to several representatives of high rock slope's stability evaluation and reinforcement engineering practice in southwest of China.

Practical elasto-plastic damage model for dynamic loading and nonlinear analysis of Koyna concrete dam

The elasto-plastic damage model for concrete under static loading,previously proposed,was extended to account for the concrete strain-rate through viscous regularization of the evolution of the damage variables.In order to describe the energy dissipation by the motion of the structure under dynamic loading,a damping model which only includes stiffness damp stress was proposed and incorporated into the proposed rate dependent model to consider the energy dissipation at the material scale.The proposed model was developed in ABAQUS via UMAT and was verified by the simulations of concrete specimens under both tension and compression uniaxial loading at different strain rates.The nonlinear analysis of Koyna concrete dam under earthquake motions indicates that adding stiffness damp into the constitutive model can significantly enhance the calculation efficiency of the dynamic implicit analysis for greatly improving the numerical stability of the model.Considering strain rate effect in the model can affect the displacement reflection of this structure for slightly enhancing the displacement of the top,and can improve the calculation efficiency for greatly reducing the cost time.

Effect of Suppressed DOF on a Rigid RC Bridge Response under Strong Earthquake Motion

NLTHA （nonlinear time history analysis） is impractical for widespread used by the professional engineer because it requires long and inefficient computational time involving complexities when six DOF （degree of freedom） per node is applied. The NLTHA nowadays is predicted by MPA （modal pushover analysis）. In this method, effects of higher modes on the dynamic response are considered to estimate seismic demands for structures. In this study, the effect of the reduction of number of DOF is analyzed using 3D NLTHA together with MPA of a rigid connection RC bridge under large earthquake motion. The results are compared with the 6 DOF NLTHA in terms of response of the structure and CPU time to obtain the most efficient computational effort. Result of NLTHA showed that the computational time of the structure both for 4 DOF （without two lateral torsional effects） and 3 DOF （without two lateral torsional and vertical displacements） was reduced significantly compared to the structure using 6 DOF. The reduction of computational time was close to fifty percent both for 4 and 3 DOF＇s. When the maximum responses between NLTHA and MPA are compared, it is found that the differences are insignificant.

Elastoplastic numerical analysis of layered soil foundation under the rectangular shallow footing subjected to vertical load

Finite and infinite coupled element method was used to analyze the strength and deformation in layered soil foundation which was under the rectangular shallow footing subjected to vertical loads. In the numerical analysis, the footing was assumed to be elastic; the soil was assumed to be elastoplastic and the Drucker-Prager constitutive model was applied to describe its mechanic behavior. Corresponding program was employed to compute six kinds of layered soil foundations constituted by different soil layers. The conclusions which are useful in the theory and practice were made according to the analysis of the computation results.

Elastic-plastic analysis for pile-anchor supporting system of deep foundation pit

By using numerical analysis methods to simulate the deep excavation,a lot of analyses are established on the basis of two-dimensional plane strain,ignoring the fact that foundation pit possesses three dimensions. For soil constitutive relation,people always take linear and nonlinear model,without considering the plastic behavior of soil. Using plastic-elastic hardening model to simulate constitutive relation of soil characteristics,the authors carried out mechanical analysis for pit excavation and support. The results show that the analysis for the stress state of pile anchor system is an effective way which provides theoretical basis for calculation of soil displacement.

Thermoelastoplastic Deformation Analysis of Electromechanical Equipments under Electrocaloric Shock

A coupled thermomechanical model is presented to investigate the thermoelastoplastic deformation mechanism of electromechanical equipments under the condition of electrocaloric shock. In the coupling model, differentiating from the previous analyzing viewpoint that looked upon deformation work as additional heat source, temperature-field equation is established by considering the weakening role of deformation work on the intensity of internal heat source; in the process of setting up displacement-field equation, G-derivative of nonlinear functional is introduced into the traditional theory of elastoplastic finite deformation to simplify the expression of structural stiffness; stress-field equation is constructed by using the least square method to improve the stress solution obtained by constitutive equation. The presented model is converted into finite element program to simulate deforming process of 3-D structures with temperature-dependent material properties. As an example, thermal deformation analysis of Shanghai metro cars’ brake resistor is performed and compared with experimental results for illustrating the validity of the presented model.

Structural Optimization of Lap Link Based on Elastoplastic Finite Element Analysis

Based on finite-deformation elastoplastic theory, a scheme to solve the structural problems of the lap link by using ANSYS is proposed. The analysis results show that the maximum deformation exists at the loading spot of the lateral pin and the stiffness of this area needs to be enhanced; the maximum stresses occur at the two sides adjacent to the loading spot and the intensity around this region should be strengthened;the materials at the pole and pinhole with relatively low stress are redundant and removing excessive weight is possible. Based on the analysis, corresponding improvements are tentatively made, and the simulation results prove that, the stiffness and intensity of the new structure are improved. Furthermore, the reliability and validity of this design are verified by tensile tests of two types of structure.

Numerical scheme for elastoplastic parameter identification and finite element analysis of wall-slope of the Fushun West Open Pit Mine

The elasto brittle plastic finite element analysis has been taken on the prediction for the deformation of the northwall of an open pit of Fushun, China. Numerical simulation has been made on the reinforcement measures of the slope structure. Using parameter identification techniques and connecting with elasto brittle plastic finite element program, the displacement back analysis has been made on the material parameters of the rockslope. The equivalent parameter values of the real slope structure have been obtained. The process of the rapid increment of the slope′s deformation caused by open mining during 1987～1990 has been reappeared through the numerical simulation.

More on Fatigue Verification of Class 1 Nuclear Power Piping According to ASME BPV Code

Fatigue verification of Class 1 nuclear power piping according to ASME Boiler and Pressure Vessel Code, Section III, NB-3600, which is often discussed in connection to power uprate and life-extension of aging reactors in recent years, is dealt with. Key parameters involved in the fatigue verification, e.g., the alternating stress intensity Salt, the penalty factor Ke and the cumulative damage factor U, and relevant computational procedures applicable for the assessment of low-cycle fatigue failure using strain-controlled data, are particularly addressed. A so-called simplified elastic-plastic discontinuity analysis for alternative verification when fatigue requirements found unsatisfactory, and the procedures provided in NB-3600 for evaluating the alternating stress intensity S,j,, are reviewed in detail. An in-depth discussion is given to alternative procedures suggested earlier by the authors using nonlinear finite element analyses, which uses a nonlinear finite element analysis for directly determining the alternating stress, thus eliminating uncertainties resulted from the use of the penalty factor Ke. Using this alternative, unavoidable plastic strains can be correctly taken into account in a computationally affordable way, and the reliability of the verification will not be affected by uncertainties introduced in the simplified elastic-plastic analysis.