Constant-current anodization of pure aluminum was carried out in non-corrosive capacitor working electrolytes to study the formation mechanism of nanopores in the anodic oxide films.Through comparative experiments,nan...Constant-current anodization of pure aluminum was carried out in non-corrosive capacitor working electrolytes to study the formation mechanism of nanopores in the anodic oxide films.Through comparative experiments,nanopores are found in the anodic films formed in the electrolytes after high-temperature storage(HTS)at 130°C for 240 h.A comparison of the voltage-time curves suggests that the formation of nanopores results from the decrease in formation efficiency of anodic oxide films rather than the corrosion of the electrolytes.FT-IR and UV spectra analysis shows that carboxylate and ethylene glycol in electrolytes can easily react by esterification at high temperatures.Combining the electronic current theory and oxygen bubble mold effect,the change in electrolyte composition could increase the electronic current in the anodizing process.The electronic current decreases the formation efficiency of anodic oxide films,and oxygen bubbles accompanying electronic current lead to the formation of nanopores in the dense films.The continuous electronic current and oxygen bubbles are the prerequisites for the formation of porous anodic oxides rather than the traditional field-assisted dissolution model.展开更多
In order to investigate the springback rules, the variation characteristics of physical property and microstructure in bending creep age forming process, a series of creep forming tests of 2124 aluminum alloy were con...In order to investigate the springback rules, the variation characteristics of physical property and microstructure in bending creep age forming process, a series of creep forming tests of 2124 aluminum alloy were conducted based on three kinds of single and double curvature forming tools. The results show that the spingback rate would be the minimum under the optimal coupling conditions among the temperature, aging time and internal stress state of material. Difference exists in the two directions of the formed sample with double curvature, but the curvature variation keeps the same. Yield strength, ultimate tensile strength and fracture toughness of the double curvature formed sample appear to be higher than those of the single curvature formed sample under the same aging condition, but the elongation and the anisotropy are opposite.展开更多
Incorporating aluminum particles into viscous medium was proposed to improve the thermal conductivity of the viscous medium and the efficiency of warm viscous pressure forming(WVPF)process.The influence of aluminum pa...Incorporating aluminum particles into viscous medium was proposed to improve the thermal conductivity of the viscous medium and the efficiency of warm viscous pressure forming(WVPF)process.The influence of aluminum particles on a viscous medium was investigated through settling,thermal conductivity,and compression experiments.Warm viscous pressure bulging(WVPB)experiments were conducted on polyetherimide(PEI)and AZ31B magnesium alloy sheets to determine the influence of the aluminum particles size and fraction on the forming efficiency and formed specimens based on the heating preparation times and profile curves,wall thicknesses and surface roughness values of the bulging specimens.The results show that the thermal conductivity of the viscous medium and the WVPF efficiency can be greatly improved via the addition aluminum particles with appropriate size and fraction under certain temperature condition,but have less influence on other properties of viscous medium.展开更多
In this work, the absorption-hydration hybrid method was used to recover （hydrogen ＋ nitrogen） from （hydrogen ＋ nitrogen ＋ methane ＋ argon） tail gas mixtures of synthetic ammonia plant through hydrate formatio...In this work, the absorption-hydration hybrid method was used to recover （hydrogen ＋ nitrogen） from （hydrogen ＋ nitrogen ＋ methane ＋ argon） tail gas mixtures of synthetic ammonia plant through hydrate formation/dissociation. A high-pressure reactor with magnetic stirrer was used to study the separation efficiency. The in-fluences of the concentration of anti-agglomerant, temperature, pressure, initial gas-liquid volume ratio, and oil-water volume ratio on the separation efficiency were systematically investigated in the presence of tetrahydro-furan （THF）. Anti-agglomerant was used to disperse hydrate particles into the condensate phase for water-in-oil emulsion system. Since nitrogen is the material for ammonia production, the objective production in our separation process is （hydrogen ＋ nitrogen）. Our experimental results show that by adopting appropriate operating conditions, high concentration of （hydrogen ＋ nitrogen） can be obtained using the proposed technology based on forming hydrate.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.51777097,51577093)。
文摘Constant-current anodization of pure aluminum was carried out in non-corrosive capacitor working electrolytes to study the formation mechanism of nanopores in the anodic oxide films.Through comparative experiments,nanopores are found in the anodic films formed in the electrolytes after high-temperature storage(HTS)at 130°C for 240 h.A comparison of the voltage-time curves suggests that the formation of nanopores results from the decrease in formation efficiency of anodic oxide films rather than the corrosion of the electrolytes.FT-IR and UV spectra analysis shows that carboxylate and ethylene glycol in electrolytes can easily react by esterification at high temperatures.Combining the electronic current theory and oxygen bubble mold effect,the change in electrolyte composition could increase the electronic current in the anodizing process.The electronic current decreases the formation efficiency of anodic oxide films,and oxygen bubbles accompanying electronic current lead to the formation of nanopores in the dense films.The continuous electronic current and oxygen bubbles are the prerequisites for the formation of porous anodic oxides rather than the traditional field-assisted dissolution model.
基金Project(2010CB731700)supported by the National Basic Research Program of China
文摘In order to investigate the springback rules, the variation characteristics of physical property and microstructure in bending creep age forming process, a series of creep forming tests of 2124 aluminum alloy were conducted based on three kinds of single and double curvature forming tools. The results show that the spingback rate would be the minimum under the optimal coupling conditions among the temperature, aging time and internal stress state of material. Difference exists in the two directions of the formed sample with double curvature, but the curvature variation keeps the same. Yield strength, ultimate tensile strength and fracture toughness of the double curvature formed sample appear to be higher than those of the single curvature formed sample under the same aging condition, but the elongation and the anisotropy are opposite.
基金Project(51575364)supported by the National Natural Science Foundation of ChinaProject(2014ZE54024)supported by the Aviation Science Foundation of ChinaProject(LJQ2015083)supported by the Liaoning Excellent Talents in University,China
文摘Incorporating aluminum particles into viscous medium was proposed to improve the thermal conductivity of the viscous medium and the efficiency of warm viscous pressure forming(WVPF)process.The influence of aluminum particles on a viscous medium was investigated through settling,thermal conductivity,and compression experiments.Warm viscous pressure bulging(WVPB)experiments were conducted on polyetherimide(PEI)and AZ31B magnesium alloy sheets to determine the influence of the aluminum particles size and fraction on the forming efficiency and formed specimens based on the heating preparation times and profile curves,wall thicknesses and surface roughness values of the bulging specimens.The results show that the thermal conductivity of the viscous medium and the WVPF efficiency can be greatly improved via the addition aluminum particles with appropriate size and fraction under certain temperature condition,but have less influence on other properties of viscous medium.
基金Supported by the National/qatural Science Foundation of China （20925623, 21006126）, the Special Funds for Major State Basic Research Program of China （No. 2009CB219504）, the Research Funds of China University of Petroleum, Beijing （BJBJRC-2010-01）, and Beijing Nova Program （2010B069）.
文摘In this work, the absorption-hydration hybrid method was used to recover （hydrogen ＋ nitrogen） from （hydrogen ＋ nitrogen ＋ methane ＋ argon） tail gas mixtures of synthetic ammonia plant through hydrate formation/dissociation. A high-pressure reactor with magnetic stirrer was used to study the separation efficiency. The in-fluences of the concentration of anti-agglomerant, temperature, pressure, initial gas-liquid volume ratio, and oil-water volume ratio on the separation efficiency were systematically investigated in the presence of tetrahydro-furan （THF）. Anti-agglomerant was used to disperse hydrate particles into the condensate phase for water-in-oil emulsion system. Since nitrogen is the material for ammonia production, the objective production in our separation process is （hydrogen ＋ nitrogen）. Our experimental results show that by adopting appropriate operating conditions, high concentration of （hydrogen ＋ nitrogen） can be obtained using the proposed technology based on forming hydrate.
