To investigate the complex macro-mechanical properties of coal from a micro-mechanical perspective,we have conducted a series of micro-mechanical experiments on coal using a nano-indentation instrument.These experimen...To investigate the complex macro-mechanical properties of coal from a micro-mechanical perspective,we have conducted a series of micro-mechanical experiments on coal using a nano-indentation instrument.These experiments were conducted under both dynamic and static loading conditions,allowing us to gather the micro-mechanical parameters of coal for further analysis of its micro-mechanical heterogeneity using the box counting statistical method and the Weibull model.The research findings indicate that the load–displacement curves of the coal mass under the two different loading modes exhibit noticeable discreteness.This can be attributed to the stress concentration phenomenon caused by variations in the mechanical properties of the micro-units during the loading process of the coal mass.Consequently,there are significant fluctuations in the micro-mechanical parameters of the coal mass.Moreover,the mechanical heterogeneity of the coal at the nanoscale was confirmed based on the calculation results of the standard deviation coefficient and Weibull modulus of the coal body’s micromechanical parameters.These results reveal the influence of microstructural defects and minerals on the uniformity of the stress field distribution within the loaded coal body,as well as on the ductility characteristics of the micro-defect structure.Furthermore,there is a pronounced heterogeneity in the micromechanical parameters.Furthermore,we have established a relationship between the macro and micro elastic modulus of coal by applying the Mori-Tanaka homogenization method.This relationship holds great significance for revealing the micro-mechanical failure mechanism of coal.展开更多
The microstructure and mechanical properties of ceramic coatings formed on 6063 aluminium alloy obtained in silicate-,borate- and aluminate-based electrolyte without and with nanoadditive Al2O3 and TiO2 by micro-arc o...The microstructure and mechanical properties of ceramic coatings formed on 6063 aluminium alloy obtained in silicate-,borate- and aluminate-based electrolyte without and with nanoadditive Al2O3 and TiO2 by micro-arc oxidation（MAO） were studied by scanning electron microscopy（SEM）,energy-dispersive X-ray spectroscopy（EDS）,X-ray diffraction（XRD）,microhardness and friction-abrasion tests,respectively.SEM results show that coatings with nanoadditive have less porosities than those without nanoadditive.XRD results reveal that nanoadditive-containing coatings contain more oxides compared with nanoadditive-free coatings in all cases,which are consistent with the EDS analysis.Mechanical properties tests show that nanoadditive Al2O3-containing coatings have higher microhardness values compared with the other coatings obtained in silicate-,borate- and aluminate-based electrolyte.On the other hand,nanoadditive has a positive effect on improving the wearing-resistance of MAO coatings in all cases.Furthermore,the borate-MAO coatings present an inferior anti-wearing property compared with the silicate- and aluminate-MAO coatings for both the nanoadditive-free and nanoadditive-containing coatings.展开更多
The microscopic mechanical characteristics of ultranano-crystalline diamond films which were prepared in four different atmospheres were investigated for the applications in microelectron-mechanical system（MEMS）.The...The microscopic mechanical characteristics of ultranano-crystalline diamond films which were prepared in four different atmospheres were investigated for the applications in microelectron-mechanical system（MEMS）.The loading-unloading curves and the change of modulus and hardness of samples along with depth were achieved through nanoindenter.The results show that the films which are made in atmosphere without Ar have the highest recovery of elasticity,hardness（72.9 GPa） and elastic modulus（693.7 GPa） among the samples.Meanwhile,samples fabricated at a low Ar content have higher hardness and modulus.All the results above demonstrate that atmosphere without Ar or low Ar content leads to better mechanical properties of nanodiamond films that are the candidates for applications in MEMS.展开更多
In order to prepare high-performance Mo with fine and homogeneous microstructure to meet the demand of high-technology applications such as metallurgical,mechanical,national defense,aerospace and electronics applicati...In order to prepare high-performance Mo with fine and homogeneous microstructure to meet the demand of high-technology applications such as metallurgical,mechanical,national defense,aerospace and electronics applications,the microwave sintering process and densification mechanism of Mo nanopowder were studied.In this experiment,Mo nanopowder and micropowder were used for conventional sintering and microwave sintering at different sintering temperatures and sintering time,respectively.The results showed that with the increase in the sintering temperature,the increase rates of the relative density and hardness increased rapidly at first and then slowed down.The relative density rapidly reached 95%,followed by a small change.Mo nanopowder with a relative density of 98.03% and average grain size of 3.6 μm was prepared by microwave sintering at 1873 K for30 min.According to the analysis of the sintering kinetics,its densification is attributed to the combination of volumetric diffusion and grain boundary diffusion mechanisms.The calculated sintering activation energy of Mo nanopowder was 203.65 kJ/mol,which was considerably lower than that in the conventional sintering,suggesting that the microwave sintering was beneficial to the enhancement in the atom diffusion and densification for the powder.The results confirm that the microwave sintering is a promising method to economically prepare molybdenum with high properties.展开更多
The structure of the quaternary Al?(2?4)wt.%Ca?Ni?La system near the aluminum corner has been studied using computational analysis in the Thermo-Calc program and experimental studies(electron microscopy,microprobe ana...The structure of the quaternary Al?(2?4)wt.%Ca?Ni?La system near the aluminum corner has been studied using computational analysis in the Thermo-Calc program and experimental studies(electron microscopy,microprobe analysis and X-ray diffraction).Based on the phase equilibria data obtained,the experimental projection of the liquidus surface and solid state phase-field distribution of the Al?Ca?Ni?La system have been proposed.Microstructure studies reveal that the alloys with the 2?4 wt.%Ca,2?4 wt.%Ni and 1?3 wt.%La ranges have an ultra-fine hypoeutectic structure with 30%volume fraction of eutectic intermetallics,which allows one to classify these alloys as natural Al-matrix composites.The ultra-fine eutectic structure produces significant strengthening,the magnitude of which can be well described using the modified Orowan looping mechanism model.Small additives of Zr and Sc(0.2 and 0.1 wt.%,respectively)lead to significant strengthening(by^25%)due to the formation of L12 type phase(Al3(Zr,Sc))nanoparticles during annealing of the alloy at 350?400℃.Due to the high volume fraction of eutectic intermetallics,the new alloys have low coefficients of thermal expansion and high thermal stability of the structure and mechanical properties.展开更多
Scanning probe microscopy(SPM)is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen.Atomic force microscopy is one of the SPM family which is considered as a very versa...Scanning probe microscopy(SPM)is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen.Atomic force microscopy is one of the SPM family which is considered as a very versatile tool for surface imaging and measurements.A wide range of various samples can be measured regardless of being conductive,no-conductive,in vacuum,in air or in a fluid as a unique feature.One of the most challenges in atomic force microscopes(AFMs)is to evaluate the associated uncertainty during the surface measurements by AFMs.Here,an optical AFM is calibrated through the calibration of XYZ stage.The approach is to overcome difficulties experienced when trying to evaluate some uncertainty components which cannot be experimentally determined i.e.tip surface interaction forces and tip geometry.The Monte Carlo method is then used to determine the associated uncertainties due to such factors by randomly drawing the parameters according to their associated tolerances and their probability density functions(PDFs).The whole process follows supplement 2 to“the guide to the expression of the uncertainty in measurement”(GUM).The approach validated in the paper shows that the evaluated uncertainty in AFM is about 10 nm.展开更多
基金Projects(U23B2093,52274245)supported by the National Natural Science Foundation of ChinaProject(KFJJ22-15M)supported by the Opening Project of State Key Laboratory of Explosion Science and Technology,China。
文摘To investigate the complex macro-mechanical properties of coal from a micro-mechanical perspective,we have conducted a series of micro-mechanical experiments on coal using a nano-indentation instrument.These experiments were conducted under both dynamic and static loading conditions,allowing us to gather the micro-mechanical parameters of coal for further analysis of its micro-mechanical heterogeneity using the box counting statistical method and the Weibull model.The research findings indicate that the load–displacement curves of the coal mass under the two different loading modes exhibit noticeable discreteness.This can be attributed to the stress concentration phenomenon caused by variations in the mechanical properties of the micro-units during the loading process of the coal mass.Consequently,there are significant fluctuations in the micro-mechanical parameters of the coal mass.Moreover,the mechanical heterogeneity of the coal at the nanoscale was confirmed based on the calculation results of the standard deviation coefficient and Weibull modulus of the coal body’s micromechanical parameters.These results reveal the influence of microstructural defects and minerals on the uniformity of the stress field distribution within the loaded coal body,as well as on the ductility characteristics of the micro-defect structure.Furthermore,there is a pronounced heterogeneity in the micromechanical parameters.Furthermore,we have established a relationship between the macro and micro elastic modulus of coal by applying the Mori-Tanaka homogenization method.This relationship holds great significance for revealing the micro-mechanical failure mechanism of coal.
基金Project(51371039)supported by the National Natural Science Foundation of China
文摘The microstructure and mechanical properties of ceramic coatings formed on 6063 aluminium alloy obtained in silicate-,borate- and aluminate-based electrolyte without and with nanoadditive Al2O3 and TiO2 by micro-arc oxidation（MAO） were studied by scanning electron microscopy（SEM）,energy-dispersive X-ray spectroscopy（EDS）,X-ray diffraction（XRD）,microhardness and friction-abrasion tests,respectively.SEM results show that coatings with nanoadditive have less porosities than those without nanoadditive.XRD results reveal that nanoadditive-containing coatings contain more oxides compared with nanoadditive-free coatings in all cases,which are consistent with the EDS analysis.Mechanical properties tests show that nanoadditive Al2O3-containing coatings have higher microhardness values compared with the other coatings obtained in silicate-,borate- and aluminate-based electrolyte.On the other hand,nanoadditive has a positive effect on improving the wearing-resistance of MAO coatings in all cases.Furthermore,the borate-MAO coatings present an inferior anti-wearing property compared with the silicate- and aluminate-MAO coatings for both the nanoadditive-free and nanoadditive-containing coatings.
基金Projects(51301211,21271188)supported by the National Natural Science Foundation of ChinaProject(2010A0302013)supported by the Foundation of China Academy of Engineering Physics+3 种基金Project(ZZ13005)supported by the Foundation of Laboratory of Ultra Precision Manufacturing Technology of China Academy of Engineering PhysicsProject(2012M521541)supported by the China Postdoctoral Science FoundationProject(20110933K)supported by the State Key Laboratory of Powder Metallurgy,ChinaProject(CSU2013016)support by and the Open-End Fund for Valuable and Precision instruments of Central South University,China
文摘The microscopic mechanical characteristics of ultranano-crystalline diamond films which were prepared in four different atmospheres were investigated for the applications in microelectron-mechanical system（MEMS）.The loading-unloading curves and the change of modulus and hardness of samples along with depth were achieved through nanoindenter.The results show that the films which are made in atmosphere without Ar have the highest recovery of elasticity,hardness（72.9 GPa） and elastic modulus（693.7 GPa） among the samples.Meanwhile,samples fabricated at a low Ar content have higher hardness and modulus.All the results above demonstrate that atmosphere without Ar or low Ar content leads to better mechanical properties of nanodiamond films that are the candidates for applications in MEMS.
基金Project(2017YFB0305601) supported by the National Key R&D Program of ChinaProjects(51874368,51274246) supported by the National Natural Science Foundation of China
文摘In order to prepare high-performance Mo with fine and homogeneous microstructure to meet the demand of high-technology applications such as metallurgical,mechanical,national defense,aerospace and electronics applications,the microwave sintering process and densification mechanism of Mo nanopowder were studied.In this experiment,Mo nanopowder and micropowder were used for conventional sintering and microwave sintering at different sintering temperatures and sintering time,respectively.The results showed that with the increase in the sintering temperature,the increase rates of the relative density and hardness increased rapidly at first and then slowed down.The relative density rapidly reached 95%,followed by a small change.Mo nanopowder with a relative density of 98.03% and average grain size of 3.6 μm was prepared by microwave sintering at 1873 K for30 min.According to the analysis of the sintering kinetics,its densification is attributed to the combination of volumetric diffusion and grain boundary diffusion mechanisms.The calculated sintering activation energy of Mo nanopowder was 203.65 kJ/mol,which was considerably lower than that in the conventional sintering,suggesting that the microwave sintering was beneficial to the enhancement in the atom diffusion and densification for the powder.The results confirm that the microwave sintering is a promising method to economically prepare molybdenum with high properties.
基金financial support of the grant of the Russian Science Foundation(Project No.18-79-00345)(preparation of alloys,electron microscopy(SEM,EMPA,TEM),tensile tests)Ministry of Science and Higher Education of the Russian Federation in the framework of Increase Competitiveness Program of MISiS(No.P02-2017-2-10)(thermodynamic calculations,dilatometry,DSC and XRD).
文摘The structure of the quaternary Al?(2?4)wt.%Ca?Ni?La system near the aluminum corner has been studied using computational analysis in the Thermo-Calc program and experimental studies(electron microscopy,microprobe analysis and X-ray diffraction).Based on the phase equilibria data obtained,the experimental projection of the liquidus surface and solid state phase-field distribution of the Al?Ca?Ni?La system have been proposed.Microstructure studies reveal that the alloys with the 2?4 wt.%Ca,2?4 wt.%Ni and 1?3 wt.%La ranges have an ultra-fine hypoeutectic structure with 30%volume fraction of eutectic intermetallics,which allows one to classify these alloys as natural Al-matrix composites.The ultra-fine eutectic structure produces significant strengthening,the magnitude of which can be well described using the modified Orowan looping mechanism model.Small additives of Zr and Sc(0.2 and 0.1 wt.%,respectively)lead to significant strengthening(by^25%)due to the formation of L12 type phase(Al3(Zr,Sc))nanoparticles during annealing of the alloy at 350?400℃.Due to the high volume fraction of eutectic intermetallics,the new alloys have low coefficients of thermal expansion and high thermal stability of the structure and mechanical properties.
基金National Institute of Standards(NIS),11211,Egypt。
文摘Scanning probe microscopy(SPM)is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen.Atomic force microscopy is one of the SPM family which is considered as a very versatile tool for surface imaging and measurements.A wide range of various samples can be measured regardless of being conductive,no-conductive,in vacuum,in air or in a fluid as a unique feature.One of the most challenges in atomic force microscopes(AFMs)is to evaluate the associated uncertainty during the surface measurements by AFMs.Here,an optical AFM is calibrated through the calibration of XYZ stage.The approach is to overcome difficulties experienced when trying to evaluate some uncertainty components which cannot be experimentally determined i.e.tip surface interaction forces and tip geometry.The Monte Carlo method is then used to determine the associated uncertainties due to such factors by randomly drawing the parameters according to their associated tolerances and their probability density functions(PDFs).The whole process follows supplement 2 to“the guide to the expression of the uncertainty in measurement”(GUM).The approach validated in the paper shows that the evaluated uncertainty in AFM is about 10 nm.
