The effects of dwell time on the phase structure, microstructure, and electrical properties were investigated for the 0.98（K0.sNa0.5）NbO3-0.02LaFeO3 ceramics （abbreviated as 0.98KNN-0.02LF）. All the ceramics sinte...The effects of dwell time on the phase structure, microstructure, and electrical properties were investigated for the 0.98（K0.sNa0.5）NbO3-0.02LaFeO3 ceramics （abbreviated as 0.98KNN-0.02LF）. All the ceramics sintered for different dwell time are of pure phase and the peak intensity of the 0.98KNN-0.02LF ceramics becomes stronger with a longer dwell time. Denser microstructures with larger grain size are developed for the sample with a longer dwell time. The maximum dielectric permittivity decreases with increasing the dwell time, and the deteriorative dielectric properties are due to the increasing grain size and the domain wall motion. Ferroelectric properties results indicate that 2Pr value slightly decreases with increasing the dwell time, while the 2Ec value increases. Consequently, the 0.98KNN-0.02LF ceramic sintered at 1150 ℃ for 2 h shows optimum dielectric properties （er=2253 and tan fi〈5%） and ferroelectric properties （2Pr=34.51 gC/cm2 and 2Ec=5.07 kV/mm）.展开更多
Abstract： Lead-free piezoelectric ceramics of （1 - x） Bi0.5K0.5TiO3-BaTiO3 （BKT-BT） were fabricated by the solid state reaction method with normal sintering. The influence of BT addition on the crystal structure,...Abstract： Lead-free piezoelectric ceramics of （1 - x） Bi0.5K0.5TiO3-BaTiO3 （BKT-BT） were fabricated by the solid state reaction method with normal sintering. The influence of BT addition on the crystal structure, phase transition and dielectric properties was investigated. The crystal structure and ferroelectric phase transition were studied by XRD （X-ray diffraction） and dielectric measurements. The complete solid solution of BKT-BT was observed for all compositions. In XRD results, all compositions showed a single phase perovskite structure with tetragonal symmetry at room temperature. With increasing BT content, the separation between diffraction peaks corresponded to increasing tetragonality. The phase transition temperature of ferroelectric tetragonal-paraelectric cubic （Tc） decreased with increasing BT content. As the amount of BT concentration increased, the ceramic became denser, and almost no porosity was finally obtained.展开更多
基金Project(CX201108)supported by the Doctorate Foundation of Northwestern Polytechnical University,ChinaProject(51072165)supported by the National Natural Science Foundation of ChinaProjects(KP200901,SKLSP201104)supported by the Fund of State Key Laboratory of Solidification Processing in NWPU,China
文摘The effects of dwell time on the phase structure, microstructure, and electrical properties were investigated for the 0.98（K0.sNa0.5）NbO3-0.02LaFeO3 ceramics （abbreviated as 0.98KNN-0.02LF）. All the ceramics sintered for different dwell time are of pure phase and the peak intensity of the 0.98KNN-0.02LF ceramics becomes stronger with a longer dwell time. Denser microstructures with larger grain size are developed for the sample with a longer dwell time. The maximum dielectric permittivity decreases with increasing the dwell time, and the deteriorative dielectric properties are due to the increasing grain size and the domain wall motion. Ferroelectric properties results indicate that 2Pr value slightly decreases with increasing the dwell time, while the 2Ec value increases. Consequently, the 0.98KNN-0.02LF ceramic sintered at 1150 ℃ for 2 h shows optimum dielectric properties （er=2253 and tan fi〈5%） and ferroelectric properties （2Pr=34.51 gC/cm2 and 2Ec=5.07 kV/mm）.
文摘Abstract： Lead-free piezoelectric ceramics of （1 - x） Bi0.5K0.5TiO3-BaTiO3 （BKT-BT） were fabricated by the solid state reaction method with normal sintering. The influence of BT addition on the crystal structure, phase transition and dielectric properties was investigated. The crystal structure and ferroelectric phase transition were studied by XRD （X-ray diffraction） and dielectric measurements. The complete solid solution of BKT-BT was observed for all compositions. In XRD results, all compositions showed a single phase perovskite structure with tetragonal symmetry at room temperature. With increasing BT content, the separation between diffraction peaks corresponded to increasing tetragonality. The phase transition temperature of ferroelectric tetragonal-paraelectric cubic （Tc） decreased with increasing BT content. As the amount of BT concentration increased, the ceramic became denser, and almost no porosity was finally obtained.
