期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
HA涂层对3D打印钛合金材料安全性的影响
1
作者 杜晓丹 孙聪慧 +2 位作者 赵丹妹 姜爱莉 陈丹丹 《生物骨科材料与临床研究》 CAS 2022年第3期62-67,共6页
目的探究羟基磷灰石(HA)涂层对3D打印钛合金材料生物安全性的影响。方法将3D打印钛合金材料分为有HA涂层材料和无HA涂层材料两个样品组。分别进行细胞毒性、刺激、急性毒性、溶血、回复突变、小鼠淋巴瘤试验和细胞致癌试验,将两种材料... 目的探究羟基磷灰石(HA)涂层对3D打印钛合金材料生物安全性的影响。方法将3D打印钛合金材料分为有HA涂层材料和无HA涂层材料两个样品组。分别进行细胞毒性、刺激、急性毒性、溶血、回复突变、小鼠淋巴瘤试验和细胞致癌试验,将两种材料的生物安全性评价进行对比,观察羟基磷灰石(HA)涂层对3D打印钛合金髋臼杯材料的生物安全性的影响。结果在细胞毒性试验中,有HA涂层组的细胞存活率为(117±6)%,无HA涂层组的细胞存活率为(106±14)%,均大于75%;在刺激试验中,两种材料生理盐水浸提液组的积分均为0,玉米油浸提液组的积分均为0.06;在急性毒性试验中,各组小鼠体重均稳步增长;在溶血试验中,有HA涂层材料的溶血率为0.125%,无HA涂层材料的溶血率为-0.257%;在Ames试验中,两种材料的回复突变菌落数均在正常值范围内;在小鼠淋巴瘤试验中,各剂量组的突变频率MF均大于或小于阴性对照组,且稍微高于阴性对照组的剂量组均不超过126×10^(-6)。结论两种材料均不具有细胞毒性、急性毒性、刺激和遗传毒性,同时也证明了两种材料都不具有溶血作用。有HA涂层材料和无HA涂层材料均表现出良好的生物安全性,证明HA涂层材料是安全可靠的,这也为未来开钛合金材料通过添加涂层改性提供了安全依据。 展开更多
关键词 ha涂层 无ha涂层 安全性 3D打印 钛合金
下载PDF
Influence of Humic Acid on Interaction of Ammonium and Potassium Ions on Clay Minerals 被引量:8
2
作者 ZHANG Wen-Zhao CHEN Xiao-Qin +3 位作者 ZHOU Jian-Min LIU Dai-Huan WANG Huo-Yan DU Chang-Wen 《Pedosphere》 SCIE CAS CSCD 2013年第4期493-502,共10页
Interaction of ammonium (NH+4) and potassium (K+) is typical in field soils. However, the effects of organic matter on interaction of NH+4 and K+have not been thoroughly investigated. In this study, we examined the ch... Interaction of ammonium (NH+4) and potassium (K+) is typical in field soils. However, the effects of organic matter on interaction of NH+4 and K+have not been thoroughly investigated. In this study, we examined the changes in major physicochemical properties of three clay minerals (kaolinite, illite, and montmorillonite) after humic acid (HA) coating and evaluated the influences of these changes on the interaction of NH+4 and K+on clay minerals using batch experiments. After HA coating, the cation exchange capacity (CEC) and specific surface area (SSA) of montmorillonite decreased significantly, while little decrease in CEC and SSA occurred in illite and only a slight increase in CEC was found in kaolinite. Humic acid coating significantly increased cation adsorption and preference for NH+4, and this effect was more obvious on clay minerals with a lower CEC. Results of Fourier transform infrared spectrometry analysis showed that HA coating promoted the formation of H-bonds between the adsorbed NH+4 and the organo-mineral complexes. HA coating increased cation fixation capacity on montmorillonite and kaolinite, but the opposite occurred on illite. In addition, HA coating increased the competitiveness of NH+4 on fixation sites. These results showed that HA coating affected both the nature of clay mineral surfaces and the reactions of NH+4 and K+with clay minerals, which might influence the availability of nutrient cations to plants in field soils amended with organic matter. 展开更多
关键词 ADSORPTION ILLITE KAOLINITE MONTMORILLONITE organo-mineral complex
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部