针对CARACaS(Control Architecture for Robotic Agent Command and Sensing)无人自主框架、核心组件、示范验证和应用发展情况进行综述。首先,简要描述了自主框架的组成及其软件架构的设计原则和思路,对行为、动态规划和感知三类引擎...针对CARACaS(Control Architecture for Robotic Agent Command and Sensing)无人自主框架、核心组件、示范验证和应用发展情况进行综述。首先,简要描述了自主框架的组成及其软件架构的设计原则和思路,对行为、动态规划和感知三类引擎的技术特征进行分析,讨论了世界模型的构建原则和方式;其次,较为详细地分析了CARACaS技术典型示范验证和拓展应用情况,讨论了水面无人艇自主导航应用中CARACaS感知系统技术演化和发展;然后,考虑CARACaS技术示范验证与美国无人行业领军代表——空间集成系统公司SIS(Spatial Integrated Systems)集成开发工作密切相关,概要总结了SIS集成技术特点和最新进展;最后,结合美军在无人领域重点研究技术的发展情况,给出了几点启示。展开更多
The cooperative control and stability analysis problems for the multi-agent system with sampled com- munication are investigated. Distributed state feedback controllers are adopted for the cooperation of networked age...The cooperative control and stability analysis problems for the multi-agent system with sampled com- munication are investigated. Distributed state feedback controllers are adopted for the cooperation of networked agents. A theorem in the form of linear matrix inequalities（LMI） is derived to analyze the system stability. An- other theorem in the form of optimization problem subject to LMI constraints is proposed to design the controller, and then the algorithm is presented. The simulation results verify the validity and the effectiveness of the pro- posed approach.展开更多
We deal with a consensus control problem for a group of third order agents which are networked by digraphs.Assuming that the control input of each agent is constructed based on weighted difference between its states a...We deal with a consensus control problem for a group of third order agents which are networked by digraphs.Assuming that the control input of each agent is constructed based on weighted difference between its states and those of its neighbor agents, we aim to propose an algorithm on computing the weighting coefficients in the control input. The problem is reduced to designing Hurwitz polynomials with real or complex coefficients. We show that by using Hurwitz polynomials with complex coefficients, a necessary and sufficient condition can be obtained for designing the consensus algorithm. Since the condition is both necessary and sufficient, we provide a kind of parametrization for all the weighting coefficients achieving consensus. Moreover, the condition is a natural extension to second order consensus, and is reasonable and practical due to its comparatively decreased computation burden. The result is also extended to the case where communication delay exists in the control input.展开更多
Cloud computing can offer a very powerful, reliable, predictable and scalable computing infrastructure for the execution of MAS （multi-agent systems） implementing complex agent-based applications such when modelling...Cloud computing can offer a very powerful, reliable, predictable and scalable computing infrastructure for the execution of MAS （multi-agent systems） implementing complex agent-based applications such when modelling, simulation and real-time running of complex systems must be provided. Multi-agent systems appears as an adequate approach to current challenges in many areas. Between important qualities of MAS also belongs to, that they are open, interoperable, and heterogenous systems. The agent is active, a program entity, has its own ideas how to perform the tasks of the own agenda. Agents： perceive, behave ＂reasonably＂, act in the environment, communicate with other agents. Cloud infrastructures can offer an ideal platform where run MAS systems simulations, applications and real-time running because of its large amount of processing and memory resources that can be dynamically configured for executing large agent-based software at unprecedented scale. Cloud computing can help chemical and food companies drive operational excellence; meet growing and changing customer demands; accelerate new product innovation and ramp-to-volume manufacturing in key markets; reduce IT spending; manage and mitigate supply chain risks; and enable faster and more flexible delivery of new IT system. Production type of SOC （service-oriented computing） can be inspired by a ＂Cloud＂, for the production of ＂Cloud＂ offers an attractive and natural solutions in several computing trends such as delivery system over the Internet, use of utilities, flexibility, virtualization, a ＂grid＂ distributed computing, outsourcing, Web 2.0, etc.. Production of the ＂Cloud＂ is also considered as a new multidisciplinary field that includes ＂network＂ production, virtual manufacturing, agile manufacturing, and of course cloud computing. Examples of cloud computing and MAS applications in food and chemistry development and industry, proposition of using multi-agent systems in the control of batch processes, modified ACO （ant colony optimization） approach for the diversified service allocation and scheduling mechanism in cloud paradigma, examples of applications in a business area were studied in the paper.展开更多
This paper focuses on the development of an embedded integrated servo-controller （EISC） for servomotors. Comprising of mainly servo-controller and servo-amplifiers, this EISC is capable of controlling a wide range o...This paper focuses on the development of an embedded integrated servo-controller （EISC） for servomotors. Comprising of mainly servo-controller and servo-amplifiers, this EISC is capable of controlling a wide range of servomotors to perform complieated tasks. Hence, integration of this EISC with a servomotor forms an intelligent modular actuator （IMA） that is essential to modern manufacturing industries. The development of such an EISC involves two major tasks： first, designing the hardware of a compact-sized and highly compatible EISC, and second, developing the software functions to facilitate its functionalities and capahilities. The developed EISC hence forms an integrated-servo-eontrol module, which determines the capability, functionality, flexibility and responsiveness of these IMAs.展开更多
A future smart grid must fulfill the vision of the Energy Internet in which millions of people produce their own energy from renewables in their homes, offices, and factories and share it with each other. Electric veh...A future smart grid must fulfill the vision of the Energy Internet in which millions of people produce their own energy from renewables in their homes, offices, and factories and share it with each other. Electric vehicles and local energy storage will be widely deployed. Internet technology will be utilized to transform the power grid into an energysharing inter-grid. To prepare for the future, a smart grid with intelligent periphery, or smart GRIP, is proposed. The building blocks of GRIP architecture are called clusters and include an energy-management system （EMS）-controlled transmission grid in the core and distribution grids, micro-grids, and smart buildings and homes on the periphery; all of which are hierarchically structured. The layered architecture of GRIP allows a seamless transition from the present to the future and plug-and-play interoperability. The basic functions of a cluster consist of （1） dispatch, （2） smoothing, and （3） mitigation. A risk-limiting dispatch methodology is presented; a new device, called the electric spring, is developed for smoothing out fluctuations in periphery clusters; and means to mitigate failures are discussed.展开更多
This paper introduces a design to improve the radiotherapy accuracy of gamma knife. In this design, sensor is used to collect respiratory parameters and tumor displacement (caused by human respiration) model is establ...This paper introduces a design to improve the radiotherapy accuracy of gamma knife. In this design, sensor is used to collect respiratory parameters and tumor displacement (caused by human respiration) model is established through optimization modeling. At the same time, data are transferred to single chip microcomputer (SCM) system by pressure sensor and then stepping motor is controlled by SCM. Finally, the intelligent positioning bed is under the control of stepping motor. As a result, the intelligent positioning bed can move reverse to respiratory law. The experimental results showed that this method can reduce the influence of respiration on tumor displacement, improving the accuracy of intelligent positioning bed with simple circuit and low cost at the same time.展开更多
This paper reviews some main results and progress in distributed multi-agent coordination from a graph Laplacian perspective. Distributed multi-agent coordination has been a very active subject studied extensively by ...This paper reviews some main results and progress in distributed multi-agent coordination from a graph Laplacian perspective. Distributed multi-agent coordination has been a very active subject studied extensively by the systems and control community in last decades, including distributed consensus, formation control, sensor localization, distributed optimization, etc. The aim of this paper is to provide both a comprehensive survey of existing literature in distributed multi-agent coordination and a new perspective in terms of graph Laplacian to categorize the fundamental mechanisms for distributed coordination. For different types of graph Laplacians, we summarize their inherent coordination features and specific research issues. This paper also highlights several promising research directions along with some open problems that are deemed important for future study.展开更多
This paper studies the consensus problem of multi-agent systems in which all agents are modeled by a general linear system. The authors consider the case where only the relative output feedback between the neighboring...This paper studies the consensus problem of multi-agent systems in which all agents are modeled by a general linear system. The authors consider the case where only the relative output feedback between the neighboring agents can be measured. To solve the consensus problem, the authors first construct a static relative output feedback control under some mild constraints on the system model. Then the authors use an observer based approach to design a dynamic relative output feedback control. If the adjacent graph of the system is undirected and connected or directed with a spanning tree, with the proposed control laws, the consensus can be achieved. The authors note that with the observer based approach, some information exchange between the agents is needed unless the associated adjacent graph is completely connected.展开更多
文摘针对CARACaS(Control Architecture for Robotic Agent Command and Sensing)无人自主框架、核心组件、示范验证和应用发展情况进行综述。首先,简要描述了自主框架的组成及其软件架构的设计原则和思路,对行为、动态规划和感知三类引擎的技术特征进行分析,讨论了世界模型的构建原则和方式;其次,较为详细地分析了CARACaS技术典型示范验证和拓展应用情况,讨论了水面无人艇自主导航应用中CARACaS感知系统技术演化和发展;然后,考虑CARACaS技术示范验证与美国无人行业领军代表——空间集成系统公司SIS(Spatial Integrated Systems)集成开发工作密切相关,概要总结了SIS集成技术特点和最新进展;最后,结合美军在无人领域重点研究技术的发展情况,给出了几点启示。
基金Supported by the National Natural Science Foundation of China(91016017)the National Aviation Found of China(20115868009)~~
文摘The cooperative control and stability analysis problems for the multi-agent system with sampled com- munication are investigated. Distributed state feedback controllers are adopted for the cooperation of networked agents. A theorem in the form of linear matrix inequalities（LMI） is derived to analyze the system stability. An- other theorem in the form of optimization problem subject to LMI constraints is proposed to design the controller, and then the algorithm is presented. The simulation results verify the validity and the effectiveness of the pro- posed approach.
基金supported by Japan Ministry of Education,Sciences and Culture(C21560471)the National Natural Science Foundation of China(61603268)+1 种基金the Research Project Supported by Shanxi Scholarship Council of China(2015-044)the Fundamental Research Project of Shanxi Province(2015021085)
文摘We deal with a consensus control problem for a group of third order agents which are networked by digraphs.Assuming that the control input of each agent is constructed based on weighted difference between its states and those of its neighbor agents, we aim to propose an algorithm on computing the weighting coefficients in the control input. The problem is reduced to designing Hurwitz polynomials with real or complex coefficients. We show that by using Hurwitz polynomials with complex coefficients, a necessary and sufficient condition can be obtained for designing the consensus algorithm. Since the condition is both necessary and sufficient, we provide a kind of parametrization for all the weighting coefficients achieving consensus. Moreover, the condition is a natural extension to second order consensus, and is reasonable and practical due to its comparatively decreased computation burden. The result is also extended to the case where communication delay exists in the control input.
文摘Cloud computing can offer a very powerful, reliable, predictable and scalable computing infrastructure for the execution of MAS （multi-agent systems） implementing complex agent-based applications such when modelling, simulation and real-time running of complex systems must be provided. Multi-agent systems appears as an adequate approach to current challenges in many areas. Between important qualities of MAS also belongs to, that they are open, interoperable, and heterogenous systems. The agent is active, a program entity, has its own ideas how to perform the tasks of the own agenda. Agents： perceive, behave ＂reasonably＂, act in the environment, communicate with other agents. Cloud infrastructures can offer an ideal platform where run MAS systems simulations, applications and real-time running because of its large amount of processing and memory resources that can be dynamically configured for executing large agent-based software at unprecedented scale. Cloud computing can help chemical and food companies drive operational excellence; meet growing and changing customer demands; accelerate new product innovation and ramp-to-volume manufacturing in key markets; reduce IT spending; manage and mitigate supply chain risks; and enable faster and more flexible delivery of new IT system. Production type of SOC （service-oriented computing） can be inspired by a ＂Cloud＂, for the production of ＂Cloud＂ offers an attractive and natural solutions in several computing trends such as delivery system over the Internet, use of utilities, flexibility, virtualization, a ＂grid＂ distributed computing, outsourcing, Web 2.0, etc.. Production of the ＂Cloud＂ is also considered as a new multidisciplinary field that includes ＂network＂ production, virtual manufacturing, agile manufacturing, and of course cloud computing. Examples of cloud computing and MAS applications in food and chemistry development and industry, proposition of using multi-agent systems in the control of batch processes, modified ACO （ant colony optimization） approach for the diversified service allocation and scheduling mechanism in cloud paradigma, examples of applications in a business area were studied in the paper.
基金Supported by the High Technology Research and Development Programme of China （No.2002AA421160） and the National Natural Science Foundation of China （No.50375008）.
文摘This paper focuses on the development of an embedded integrated servo-controller （EISC） for servomotors. Comprising of mainly servo-controller and servo-amplifiers, this EISC is capable of controlling a wide range of servomotors to perform complieated tasks. Hence, integration of this EISC with a servomotor forms an intelligent modular actuator （IMA） that is essential to modern manufacturing industries. The development of such an EISC involves two major tasks： first, designing the hardware of a compact-sized and highly compatible EISC, and second, developing the software functions to facilitate its functionalities and capahilities. The developed EISC hence forms an integrated-servo-eontrol module, which determines the capability, functionality, flexibility and responsiveness of these IMAs.
基金sponsored by National Key Basic Research Program of China (973 Program) (2012CB215102) for WuUS National Science Foundation Award (1135872) for VaraiyaHong Kong RGC Theme-based Research Project (T23-701/14-N) for Hui
文摘A future smart grid must fulfill the vision of the Energy Internet in which millions of people produce their own energy from renewables in their homes, offices, and factories and share it with each other. Electric vehicles and local energy storage will be widely deployed. Internet technology will be utilized to transform the power grid into an energysharing inter-grid. To prepare for the future, a smart grid with intelligent periphery, or smart GRIP, is proposed. The building blocks of GRIP architecture are called clusters and include an energy-management system （EMS）-controlled transmission grid in the core and distribution grids, micro-grids, and smart buildings and homes on the periphery; all of which are hierarchically structured. The layered architecture of GRIP allows a seamless transition from the present to the future and plug-and-play interoperability. The basic functions of a cluster consist of （1） dispatch, （2） smoothing, and （3） mitigation. A risk-limiting dispatch methodology is presented; a new device, called the electric spring, is developed for smoothing out fluctuations in periphery clusters; and means to mitigate failures are discussed.
文摘This paper introduces a design to improve the radiotherapy accuracy of gamma knife. In this design, sensor is used to collect respiratory parameters and tumor displacement (caused by human respiration) model is established through optimization modeling. At the same time, data are transferred to single chip microcomputer (SCM) system by pressure sensor and then stepping motor is controlled by SCM. Finally, the intelligent positioning bed is under the control of stepping motor. As a result, the intelligent positioning bed can move reverse to respiratory law. The experimental results showed that this method can reduce the influence of respiration on tumor displacement, improving the accuracy of intelligent positioning bed with simple circuit and low cost at the same time.
基金Project supported by the National Natural Science Foundation of China （No. 61273113）
文摘This paper reviews some main results and progress in distributed multi-agent coordination from a graph Laplacian perspective. Distributed multi-agent coordination has been a very active subject studied extensively by the systems and control community in last decades, including distributed consensus, formation control, sensor localization, distributed optimization, etc. The aim of this paper is to provide both a comprehensive survey of existing literature in distributed multi-agent coordination and a new perspective in terms of graph Laplacian to categorize the fundamental mechanisms for distributed coordination. For different types of graph Laplacians, we summarize their inherent coordination features and specific research issues. This paper also highlights several promising research directions along with some open problems that are deemed important for future study.
基金supported by the Swedish Research Council(VR)the Swedish Foundation for Strategic Research(SSF)+3 种基金the NNSF of China under Grant Nos.61203142 and 61273221the Excellent Young Technology Innovation Foundation of Hebei University of Technology under Grant No.2012005the Ministry of Education Innovation Team Development Plan under Grant No.IRT1232the Natural Science Foundation of Tianjin under Grant No.13JCQNJC03500
文摘This paper studies the consensus problem of multi-agent systems in which all agents are modeled by a general linear system. The authors consider the case where only the relative output feedback between the neighboring agents can be measured. To solve the consensus problem, the authors first construct a static relative output feedback control under some mild constraints on the system model. Then the authors use an observer based approach to design a dynamic relative output feedback control. If the adjacent graph of the system is undirected and connected or directed with a spanning tree, with the proposed control laws, the consensus can be achieved. The authors note that with the observer based approach, some information exchange between the agents is needed unless the associated adjacent graph is completely connected.
