The aim of this project is to develop a novel approach for optimizing design resin film infusion (RFI) processing parameters by manufacturing T-shaped composite panel. The dimensional accuracy was selected as the obje...The aim of this project is to develop a novel approach for optimizing design resin film infusion (RFI) processing parameters by manufacturing T-shaped composite panel. The dimensional accuracy was selected as the objective function. By investigating the rheological properties of resin film, the compaction behavior of fiber preform and characteristics of RFI process, an optimal mathematical model was established, it was found that the numerical results obtained from the RFICOMP program package have good consistency with the experimental results, and this optimization procedure can be applied to other composites manufacture processes.展开更多
The gestation and occurrence of strong earthquakes are closely related to fault activity, which is not only revealed by abundant experimentation and seismism but also proved by modern seismology. On the Chinese mainla...The gestation and occurrence of strong earthquakes are closely related to fault activity, which is not only revealed by abundant experimentation and seismism but also proved by modern seismology. On the Chinese mainland, the relation between earthquake activity and active faults is one of the bases for partitioning potential seismic sources, analyzing the seismotectoulcs and estimating location of strong earthquakes.Due to the nonuniformity of earth media, instability of observation systems and disturbance of the environment, etc, the variety of observational data is complicated, that is, there is no absolutely ＂normal＂ or ＂abnormal＂, and seismic anomalies can be divided into many mutually exdusive＂ abnormal states＂. In different conditions of combined time-spacestrength, determining seismic anomalies by different monomial forecast methods and its efficiency could be different due to the uncertainty of a precursor itself or complexity of the relationship between a precursor and earthquake gestation. It is very difficult to discover and dispose of this difference in actual application in a ＂two-state＂ model. But in a ＂multi-state＂ model, the difference can be easily reflected and the optimal combination of forecasting parameters for a forecast method can also be determined easily. Based on the ＂multi-state＂ precursory model and the optimization method for parameters of earthquake forecast model under the condition of optimal forecast efficiency, the relationship of the spatial location of earthquake with M ≥ 6.0 and active faults in three seismic belts are analyzed. The results demonstrate that in the Hetao Seismic Belt, seismicity is mostly concentrated in the range of 20 km along the fault, the optimization model can forecast the location of potential earthquakes of M ≥ 6.0 near the faults with a relatively high accuracy and the reliability is 0.5 ; while in the Qilian Mt. Seismic Belt, the reliability only reaches 0.14 when we use the model to estimate earthquakes within 30 km range along the faults. The ＂multi-state＂ precursory model, the efficiency-evaluating model and the parameter selection of individual earthquake forecast model based on optimal efficiency are of certain revelatory and practicable meanings for developing knowledge about precursors, investigating the laws of earthquake preparation and searching for optimal forecasting methods.展开更多
An integrated optimization design was described using multilevel decomposition technique on the base of the parametric distribution and independent axiom at the stages of lower level. Based on Pareto optimum solution,...An integrated optimization design was described using multilevel decomposition technique on the base of the parametric distribution and independent axiom at the stages of lower level. Based on Pareto optimum solution, the detailed parameters at lower level can be defined into the independent axiom. The suspension design was used as the simulation example. In an axiomatic design for the optimization design, the uncoupled and decoupled designs between functional requirements and design parameters are generally needed. But using the design sensitivity(or screening) of design parameters, the approximate uncoupled design is developed on behalf of the decoupled and coupled designs. Successive design parameters were applied to the suspension of torsion beam axle. The structural performance increases by 18%. The kinematic and compliance performance increases by 6% within the feasible ranges.展开更多
Crimping is widely adopted in the production of large-diameter submerged-arc welding pipes. Traditionally, designers obtain the technical parameters for crimping from experience or by trial and error through experimen...Crimping is widely adopted in the production of large-diameter submerged-arc welding pipes. Traditionally, designers obtain the technical parameters for crimping from experience or by trial and error through experiments and the finite element(FE) method. However, it is difficult to achieve ideal crimping quality by these approaches. To resolve this issue, crimping parameter design was investigated by multi-objective optimization. Crimping was simulated using the FE code ABAQUS and the FE model was validated experimentally. A welding pipe made of X80 high-strength pipeline steel was considered as a target object and the optimization problem for its crimping was formulated as a mathematical model and crimping was optimized. A response surface method based on the radial basis function was used to construct a surrogate model; the genetic algorithm NSGA-II was adopted to search for Pareto solutions; grey relational analysis was used to determine the most satisfactory solution from the Pareto solutions. The obtained optimal design of parameters shows good agreement with the initial design and remarkably improves the crimping quality. Thus, the results provide an effective approach for improving crimping quality and reducing design times.展开更多
Under the condition of the designated collection ratio and the interfused ratio of mullock, to ensure the least energy consumption, the parameters of collecting head （the feed speed, the axes height of collecting hea...Under the condition of the designated collection ratio and the interfused ratio of mullock, to ensure the least energy consumption, the parameters of collecting head （the feed speed, the axes height of collecting head, and the rotate speed） are chosen as the optimized parameters. According to the force on the cutting pick, the collecting size of the cobalt crust and bedrock and the optimized energy consumption of the collecting head, the optimized design model of collecting head is built. Taking two hundred groups seabed microtopography for grand in the range of depth displacement from 4.5 to 5.5 era, then making use of the improved simulated annealing genetic algorithm （SAGA）, the corresponding optimized result can be obtained. At the same time, in order to speed up the controlling of collecting head, the optimization results are analyzed using the regression analysis method, and the conclusion of the second parameter of the seabed microtopography is drawn.展开更多
An optimal configuration of the flux-reversal linear synchronous motor (FRLSM) with the optimal number of attachment permanent magnets (PMs) was presented. The optimal model of 2 000 N was designed to reduce the deten...An optimal configuration of the flux-reversal linear synchronous motor (FRLSM) with the optimal number of attachment permanent magnets (PMs) was presented. The optimal model of 2 000 N was designed to reduce the detent force by redesigning the air-gap structure and skewing. The design parameters,mover PMs and stator core,were selected for optimal design by DOE. The thrust and the detent force of the designed optimal models were compared by finite element analysis (FEA). As a result,the thrust of the optimal model is slightly decreased by 1.97% compared with the basic model,and the detent force of the optimal model is greatly decreased by 88.47% compared with the basic model.展开更多
文摘The aim of this project is to develop a novel approach for optimizing design resin film infusion (RFI) processing parameters by manufacturing T-shaped composite panel. The dimensional accuracy was selected as the objective function. By investigating the rheological properties of resin film, the compaction behavior of fiber preform and characteristics of RFI process, an optimal mathematical model was established, it was found that the numerical results obtained from the RFICOMP program package have good consistency with the experimental results, and this optimization procedure can be applied to other composites manufacture processes.
基金This project was sponsored by the Joint Earthquake Science Foundation of CEA(Grant No.103075 and No.104016)
文摘The gestation and occurrence of strong earthquakes are closely related to fault activity, which is not only revealed by abundant experimentation and seismism but also proved by modern seismology. On the Chinese mainland, the relation between earthquake activity and active faults is one of the bases for partitioning potential seismic sources, analyzing the seismotectoulcs and estimating location of strong earthquakes.Due to the nonuniformity of earth media, instability of observation systems and disturbance of the environment, etc, the variety of observational data is complicated, that is, there is no absolutely ＂normal＂ or ＂abnormal＂, and seismic anomalies can be divided into many mutually exdusive＂ abnormal states＂. In different conditions of combined time-spacestrength, determining seismic anomalies by different monomial forecast methods and its efficiency could be different due to the uncertainty of a precursor itself or complexity of the relationship between a precursor and earthquake gestation. It is very difficult to discover and dispose of this difference in actual application in a ＂two-state＂ model. But in a ＂multi-state＂ model, the difference can be easily reflected and the optimal combination of forecasting parameters for a forecast method can also be determined easily. Based on the ＂multi-state＂ precursory model and the optimization method for parameters of earthquake forecast model under the condition of optimal forecast efficiency, the relationship of the spatial location of earthquake with M ≥ 6.0 and active faults in three seismic belts are analyzed. The results demonstrate that in the Hetao Seismic Belt, seismicity is mostly concentrated in the range of 20 km along the fault, the optimization model can forecast the location of potential earthquakes of M ≥ 6.0 near the faults with a relatively high accuracy and the reliability is 0.5 ; while in the Qilian Mt. Seismic Belt, the reliability only reaches 0.14 when we use the model to estimate earthquakes within 30 km range along the faults. The ＂multi-state＂ precursory model, the efficiency-evaluating model and the parameter selection of individual earthquake forecast model based on optimal efficiency are of certain revelatory and practicable meanings for developing knowledge about precursors, investigating the laws of earthquake preparation and searching for optimal forecasting methods.
文摘An integrated optimization design was described using multilevel decomposition technique on the base of the parametric distribution and independent axiom at the stages of lower level. Based on Pareto optimum solution, the detailed parameters at lower level can be defined into the independent axiom. The suspension design was used as the simulation example. In an axiomatic design for the optimization design, the uncoupled and decoupled designs between functional requirements and design parameters are generally needed. But using the design sensitivity(or screening) of design parameters, the approximate uncoupled design is developed on behalf of the decoupled and coupled designs. Successive design parameters were applied to the suspension of torsion beam axle. The structural performance increases by 18%. The kinematic and compliance performance increases by 6% within the feasible ranges.
基金Project(Y2012035)supported by the Natural Science Foundation of Hebei Provincial Education Department,ChinaProject(12211014)supported by the Natural Science Foundation of Hebei Provincial Technology Department,China+2 种基金Project(NJZY14006)supported by the Inner Mongolia Higher School Science and Technology Research Program,ChinaProject(2014BS0502)supported by the Natural Science Foundation of Inner Mongolia,ChinaProject(135143)supported by the Program of Higher-level Talents Fund of Inner Mongolia University,China
文摘Crimping is widely adopted in the production of large-diameter submerged-arc welding pipes. Traditionally, designers obtain the technical parameters for crimping from experience or by trial and error through experiments and the finite element(FE) method. However, it is difficult to achieve ideal crimping quality by these approaches. To resolve this issue, crimping parameter design was investigated by multi-objective optimization. Crimping was simulated using the FE code ABAQUS and the FE model was validated experimentally. A welding pipe made of X80 high-strength pipeline steel was considered as a target object and the optimization problem for its crimping was formulated as a mathematical model and crimping was optimized. A response surface method based on the radial basis function was used to construct a surrogate model; the genetic algorithm NSGA-II was adopted to search for Pareto solutions; grey relational analysis was used to determine the most satisfactory solution from the Pareto solutions. The obtained optimal design of parameters shows good agreement with the initial design and remarkably improves the crimping quality. Thus, the results provide an effective approach for improving crimping quality and reducing design times.
基金Project(50875265) supported by the National Natural Science Foundation of ChinaProject(20080440992) supported by the Postdoctoral Science Foundation of ChinaProject(2009SK3159) supported by the Technology Support Plan of Hunan Province,China
文摘Under the condition of the designated collection ratio and the interfused ratio of mullock, to ensure the least energy consumption, the parameters of collecting head （the feed speed, the axes height of collecting head, and the rotate speed） are chosen as the optimized parameters. According to the force on the cutting pick, the collecting size of the cobalt crust and bedrock and the optimized energy consumption of the collecting head, the optimized design model of collecting head is built. Taking two hundred groups seabed microtopography for grand in the range of depth displacement from 4.5 to 5.5 era, then making use of the improved simulated annealing genetic algorithm （SAGA）, the corresponding optimized result can be obtained. At the same time, in order to speed up the controlling of collecting head, the optimization results are analyzed using the regression analysis method, and the conclusion of the second parameter of the seabed microtopography is drawn.
基金Work supported by the Second Stage of Brain Korea 21 Projects
文摘An optimal configuration of the flux-reversal linear synchronous motor (FRLSM) with the optimal number of attachment permanent magnets (PMs) was presented. The optimal model of 2 000 N was designed to reduce the detent force by redesigning the air-gap structure and skewing. The design parameters,mover PMs and stator core,were selected for optimal design by DOE. The thrust and the detent force of the designed optimal models were compared by finite element analysis (FEA). As a result,the thrust of the optimal model is slightly decreased by 1.97% compared with the basic model,and the detent force of the optimal model is greatly decreased by 88.47% compared with the basic model.
