To investigate the application of compound bioflocculant （CBF） in drinking water treatment at pilot plant, CBF and polymerized aluminium ferrum chloride （PAFC） coagulant were used to treat raw water taken from Lon...To investigate the application of compound bioflocculant （CBF） in drinking water treatment at pilot plant, CBF and polymerized aluminium ferrum chloride （PAFC） coagulant were used to treat raw water taken from Longhupao Reservoir in Heilongjiang Province for the removal of turbidity, COl）, UV254 and residual Al. Coagulation test shows that the coagulation enhanced by CBF and PAFC exhibits more effective performance than that enhanced by the individual of them, and the total combination dosage is lower than that of the individual. The residual Al from PAFC can be removed efficiently by CBF. The removal efficiency of turbidity reaches 76.6% by combining CBF of 2 mg/L and PAFC of 15 mg/L, COl） is decreased from 3.80 mg/L to 1.62 mg/ L, and the concentration of residual Al is only 0. 033 mg/L in the product water. It can be speculated that adsorption-bridging and sweep-coagulation processes are predominant in the flocculation process by the combination of CBF and PAFC.展开更多
In order to take full advantage of regeneration process to reduce fresh water consumption and avoid the accumulation of trace contaminants, regeneration reuse and regeneration recycle should be distinctive. A stepwise...In order to take full advantage of regeneration process to reduce fresh water consumption and avoid the accumulation of trace contaminants, regeneration reuse and regeneration recycle should be distinctive. A stepwise optimal design for water network is developed to simplify solution procedures for the formulated MINLP problem. In this paper, a feasible water reuse network framework is generated. Some heuristic rules from water reuse network are used to guide the placement of regeneration process. Then the outlet stream of regeneration process is considered as new water source. Regeneration reuse network structure is obtained through an iterative optimal procedure by taking the insights from reuse water network structure. Furthermore, regeneration recycle is only utilized to eliminate fresh water usage for processes in which regeneration reuse is impossible. Compared with the results obtained by relevant researches for the same example, the present method not only provides an appropriate regeneration reuse water network with minimum fresh water and regenerated water flow rate but also suggests a water network involving regeneration recycle with minimum recycle water flow rate. The design can utilize reuse, regeneration reuse and regeneration recycle step by step with minor water network structure change to achieve better flexibility. It can satisfy different demands for new plants and modernization of existing plants.展开更多
The present study was undertaken to determine the effects of different levels of urea-N fertilizer in addition to ipil-ipil tree litter on yield of rice and insect prevalence. The field study was conducted at the Agro...The present study was undertaken to determine the effects of different levels of urea-N fertilizer in addition to ipil-ipil tree litter on yield of rice and insect prevalence. The field study was conducted at the Agroforestry Field Laboratory, Bangladesh Agricultural University, Mymensingh during July-December 2004. The treatments included 0, 90, 180, and 270 kg urea per hectare. All four treatments received five tons ipil-ipil tree litter per hectare. The experiment was laid out in a randomized complete block design （RCBD） with four replications. The results showed that the different treatments significantly influenced the yield and yield component viz. total tillers/hill, effective tillers/hill, filled grains and unfilled grains/panicle. The highest yield of 4.62 t·h^m-2 with an increase of 21.57% over the control was recorded in treatment 180 kg urea·h^m-2, which was statistically similar to treatment 90 kg urea·h^m-2. The prevalence of insects viz. green leafhopper, brown plant hopper, rice bugs, leaf folder and stem borers were mostly correlated with N-levels. The prevalence of insects in general gradu- ally increased with the increase of N. Therefore, this study suggests that the combined application of organic materials （tree litter of ipil-ipil） and N-fertilizer of 90 kg·h^m-2 may oroduce good yield while minimizine insect arevalence in the rice field.展开更多
The application of the Genetic Algorithm （GA） for the influent flow optimized distribution in the four stage pilot plant of Step-Feed Biological Nutrient Removal （BNR） System was discussed. Under decided process p...The application of the Genetic Algorithm （GA） for the influent flow optimized distribution in the four stage pilot plant of Step-Feed Biological Nutrient Removal （BNR） System was discussed. Under decided process parameter and influent water conditions, the objective function of optimization was designed to minimize the difference between estimated and required effluent concentrations at the four stage pilot plant of Step-Feed BNR System, the optimized parameter for influent distribution ratios of the four stages is 37.2%, 27.4%, 23.2% and 12.2% respectively. According to the optimizations results and raw wastewater pilot-scale experiment, the average removal efficiencies for pollutants are higher.展开更多
This paper introduces a novel fiat plate solar collector （FPC） using micro heat pipe array （MHPA） as a key element. To analyze the thermal transfer behavior of flat plate solar collector with micro heat pipe array...This paper introduces a novel fiat plate solar collector （FPC） using micro heat pipe array （MHPA） as a key element. To analyze the thermal transfer behavior of flat plate solar collector with micro heat pipe array （MHPA-FPC）, an indoor experiment for thermal transfer characteristic of MHPA applied to FPC was conducted by using an electrical heating film to simulate the solar radiation. Different cooling water flow rates, cooling water temperatures, slopes, and contact thermal resistances be- tween the condenser of MHPA and the heat exchanger were tested at different heating powers. The experimental results in- dicate that MHPA-FPC exhibits the enhanced heat transfer capability with increased cooling water flow rate and temperature. Total thermal resistance has a maximum decline of approximately 10% when the flow rate increases from 180 to 360 L h-1 and 38% when the cooling water temperature increases from 20~C to 40~C. When the inclination angle of MHPA-FPC ex- ceeds 30~, the slope change has a negligible effect on the heat transfer performance of MHPA-FPC. In addition, contact thermal resistance significantly affects the heat transfer capability of MHPA-FPC. The total thermal resistances lowers to nearly half of the original level when contact material between the condenser of MHPA and the heat exchanger changes from conductive silicone to conductive grease. These results could provide useful information for the optimal design and operation of MHPA-FPC.展开更多
文摘To investigate the application of compound bioflocculant （CBF） in drinking water treatment at pilot plant, CBF and polymerized aluminium ferrum chloride （PAFC） coagulant were used to treat raw water taken from Longhupao Reservoir in Heilongjiang Province for the removal of turbidity, COl）, UV254 and residual Al. Coagulation test shows that the coagulation enhanced by CBF and PAFC exhibits more effective performance than that enhanced by the individual of them, and the total combination dosage is lower than that of the individual. The residual Al from PAFC can be removed efficiently by CBF. The removal efficiency of turbidity reaches 76.6% by combining CBF of 2 mg/L and PAFC of 15 mg/L, COl） is decreased from 3.80 mg/L to 1.62 mg/ L, and the concentration of residual Al is only 0. 033 mg/L in the product water. It can be speculated that adsorption-bridging and sweep-coagulation processes are predominant in the flocculation process by the combination of CBF and PAFC.
基金Supported by the National Natural Science Foundation of China(20906007)
文摘In order to take full advantage of regeneration process to reduce fresh water consumption and avoid the accumulation of trace contaminants, regeneration reuse and regeneration recycle should be distinctive. A stepwise optimal design for water network is developed to simplify solution procedures for the formulated MINLP problem. In this paper, a feasible water reuse network framework is generated. Some heuristic rules from water reuse network are used to guide the placement of regeneration process. Then the outlet stream of regeneration process is considered as new water source. Regeneration reuse network structure is obtained through an iterative optimal procedure by taking the insights from reuse water network structure. Furthermore, regeneration recycle is only utilized to eliminate fresh water usage for processes in which regeneration reuse is impossible. Compared with the results obtained by relevant researches for the same example, the present method not only provides an appropriate regeneration reuse water network with minimum fresh water and regenerated water flow rate but also suggests a water network involving regeneration recycle with minimum recycle water flow rate. The design can utilize reuse, regeneration reuse and regeneration recycle step by step with minor water network structure change to achieve better flexibility. It can satisfy different demands for new plants and modernization of existing plants.
文摘The present study was undertaken to determine the effects of different levels of urea-N fertilizer in addition to ipil-ipil tree litter on yield of rice and insect prevalence. The field study was conducted at the Agroforestry Field Laboratory, Bangladesh Agricultural University, Mymensingh during July-December 2004. The treatments included 0, 90, 180, and 270 kg urea per hectare. All four treatments received five tons ipil-ipil tree litter per hectare. The experiment was laid out in a randomized complete block design （RCBD） with four replications. The results showed that the different treatments significantly influenced the yield and yield component viz. total tillers/hill, effective tillers/hill, filled grains and unfilled grains/panicle. The highest yield of 4.62 t·h^m-2 with an increase of 21.57% over the control was recorded in treatment 180 kg urea·h^m-2, which was statistically similar to treatment 90 kg urea·h^m-2. The prevalence of insects viz. green leafhopper, brown plant hopper, rice bugs, leaf folder and stem borers were mostly correlated with N-levels. The prevalence of insects in general gradu- ally increased with the increase of N. Therefore, this study suggests that the combined application of organic materials （tree litter of ipil-ipil） and N-fertilizer of 90 kg·h^m-2 may oroduce good yield while minimizine insect arevalence in the rice field.
文摘The application of the Genetic Algorithm （GA） for the influent flow optimized distribution in the four stage pilot plant of Step-Feed Biological Nutrient Removal （BNR） System was discussed. Under decided process parameter and influent water conditions, the objective function of optimization was designed to minimize the difference between estimated and required effluent concentrations at the four stage pilot plant of Step-Feed BNR System, the optimized parameter for influent distribution ratios of the four stages is 37.2%, 27.4%, 23.2% and 12.2% respectively. According to the optimizations results and raw wastewater pilot-scale experiment, the average removal efficiencies for pollutants are higher.
基金financially supported by the Natural Science Foundation of Beijing(Grant No.Z1004020201201)the Opening Funds of State Key Laboratory of Building Safety and Build Environment of China(Grant No.BSBE 2011-07)
文摘This paper introduces a novel fiat plate solar collector （FPC） using micro heat pipe array （MHPA） as a key element. To analyze the thermal transfer behavior of flat plate solar collector with micro heat pipe array （MHPA-FPC）, an indoor experiment for thermal transfer characteristic of MHPA applied to FPC was conducted by using an electrical heating film to simulate the solar radiation. Different cooling water flow rates, cooling water temperatures, slopes, and contact thermal resistances be- tween the condenser of MHPA and the heat exchanger were tested at different heating powers. The experimental results in- dicate that MHPA-FPC exhibits the enhanced heat transfer capability with increased cooling water flow rate and temperature. Total thermal resistance has a maximum decline of approximately 10% when the flow rate increases from 180 to 360 L h-1 and 38% when the cooling water temperature increases from 20~C to 40~C. When the inclination angle of MHPA-FPC ex- ceeds 30~, the slope change has a negligible effect on the heat transfer performance of MHPA-FPC. In addition, contact thermal resistance significantly affects the heat transfer capability of MHPA-FPC. The total thermal resistances lowers to nearly half of the original level when contact material between the condenser of MHPA and the heat exchanger changes from conductive silicone to conductive grease. These results could provide useful information for the optimal design and operation of MHPA-FPC.
