为了准确求解交替方向隐式时域有限差分(Alternating Direction Implicit Finite-Difference Time-Domain,ADI-FDTD)方法实现理想电导体边界和理想磁导体边界的待求场分量系数,通过在获得该系数前应用理想导体边界条件,推导出了相应的...为了准确求解交替方向隐式时域有限差分(Alternating Direction Implicit Finite-Difference Time-Domain,ADI-FDTD)方法实现理想电导体边界和理想磁导体边界的待求场分量系数,通过在获得该系数前应用理想导体边界条件,推导出了相应的修正系数.计算了单个金属立方体和对称的两个金属立方体的双站雷达散射截面.结果表明:理想导体边界作为理想导体表面,采用修正系数的计算结果与时域有限差分(Finite-Difference Time-Domain,FDTD)方法计算结果更为吻合;理想导体边界作为截断计算空间对称面,采用修正系数的计算结果与ADI-FDTD方法计算结果相同,与理论推导结论一致.展开更多
Based on Peltier effect,Bi_(2)Te_(3)-based alloy is widely used in commercial solid-state refrigeration at room temperature.The mainstream strategies for enhancing room-temperature thermoelectric performance in Bi_(2)...Based on Peltier effect,Bi_(2)Te_(3)-based alloy is widely used in commercial solid-state refrigeration at room temperature.The mainstream strategies for enhancing room-temperature thermoelectric performance in Bi_(2)Te_(3)focus on band and microstructure engineering.However,a clear understanding of the modulation of band structure and scattering through such engineering remains still challenging,because the minority carriers compensate partially the overall transport properties for the narrow-gap Bi_(2)Te_(3)at room temperature(known as the bipolar effect).The purpose of this work is to model the transport properties near and far away from the bipolar effect region for Bi_(2)Te_(3)-based thermoelectric material by a two-band model taking contributions of both majority and minority carriers into account.This is endowed by shifting the Fermi level from the conduction band to the valence band during the modeling.A large amount of data of Bi_(2)Te_(3)-based materials is collected from various studies for the comparison between experimental and predicted properties.The fundamental parameters,such as the density of states effective masses and deformation potential coefficients,of Bi_(2)Te_(3)-based materials are quantified.The analysis can help find out the impact factors(e.g.the mobility ratio between conduction and valence bands)for the improvement of thermoelectric properties for Bi_(2)Te_(3)-based alloys.This work provides a convenient tool for analyzing and predicting the transport performance even in the presence of bipolar effect,which can facilitate the development of the narrow-gap thermoelectric semiconductors.展开更多
Magnetism and the stability of (Ga 1-xFe x)As are investigated using the first principles LMTO-ASA band calculation by assuming supercell structures.Four concentrations of the 3d impurities are studied (x=1,1/2,1/...Magnetism and the stability of (Ga 1-xFe x)As are investigated using the first principles LMTO-ASA band calculation by assuming supercell structures.Four concentrations of the 3d impurities are studied (x=1,1/2,1/4,and 1/8).The results show the effect of varying Fe concentration on the magnetic and stable properties.展开更多
Based on a short anode GTO structure （SA-GTO）,a novel GTO structure called an injection efficiency controlled gate turn off thyristor （IEC-GTO） is proposed,in which the injection efficiency can be controlled via a...Based on a short anode GTO structure （SA-GTO）,a novel GTO structure called an injection efficiency controlled gate turn off thyristor （IEC-GTO） is proposed,in which the injection efficiency can be controlled via an additional thin oxide layer located in the short anode contact region. The forward blocking, conducting, and switching characteristics are analyzed and compared with an SA-GTO and conventional GTO. The results show that the IEC-GTO can obtain a better trade-off relation between on-state and turn-off characteristics. Additionally,the width of the oxide layer covering the anode region and the doping concentration of the anode region are optimized, the process feasibility is analyzed, and a realization scheme is given. The results show that the introduction of an oxide layer would not increase the complexity of process of the IEC-GTO.展开更多
基金National Natural Science Foundation of China(T2125008,92263108,92163203,52102292,52003198)Shanghai Rising-Star Program(23QA1409300)Innovation Program of Shanghai Municipal Education Commission(2021-01-07-00-07-E00096)。
文摘Based on Peltier effect,Bi_(2)Te_(3)-based alloy is widely used in commercial solid-state refrigeration at room temperature.The mainstream strategies for enhancing room-temperature thermoelectric performance in Bi_(2)Te_(3)focus on band and microstructure engineering.However,a clear understanding of the modulation of band structure and scattering through such engineering remains still challenging,because the minority carriers compensate partially the overall transport properties for the narrow-gap Bi_(2)Te_(3)at room temperature(known as the bipolar effect).The purpose of this work is to model the transport properties near and far away from the bipolar effect region for Bi_(2)Te_(3)-based thermoelectric material by a two-band model taking contributions of both majority and minority carriers into account.This is endowed by shifting the Fermi level from the conduction band to the valence band during the modeling.A large amount of data of Bi_(2)Te_(3)-based materials is collected from various studies for the comparison between experimental and predicted properties.The fundamental parameters,such as the density of states effective masses and deformation potential coefficients,of Bi_(2)Te_(3)-based materials are quantified.The analysis can help find out the impact factors(e.g.the mobility ratio between conduction and valence bands)for the improvement of thermoelectric properties for Bi_(2)Te_(3)-based alloys.This work provides a convenient tool for analyzing and predicting the transport performance even in the presence of bipolar effect,which can facilitate the development of the narrow-gap thermoelectric semiconductors.
文摘Magnetism and the stability of (Ga 1-xFe x)As are investigated using the first principles LMTO-ASA band calculation by assuming supercell structures.Four concentrations of the 3d impurities are studied (x=1,1/2,1/4,and 1/8).The results show the effect of varying Fe concentration on the magnetic and stable properties.
文摘Based on a short anode GTO structure （SA-GTO）,a novel GTO structure called an injection efficiency controlled gate turn off thyristor （IEC-GTO） is proposed,in which the injection efficiency can be controlled via an additional thin oxide layer located in the short anode contact region. The forward blocking, conducting, and switching characteristics are analyzed and compared with an SA-GTO and conventional GTO. The results show that the IEC-GTO can obtain a better trade-off relation between on-state and turn-off characteristics. Additionally,the width of the oxide layer covering the anode region and the doping concentration of the anode region are optimized, the process feasibility is analyzed, and a realization scheme is given. The results show that the introduction of an oxide layer would not increase the complexity of process of the IEC-GTO.
