期刊文献+
共找到13篇文章
< 1 >
每页显示 20 50 100
H_2S水溶液中的腐蚀与缓蚀作用机理的研究 Ⅰ.酸性H_2S溶液中碳钢的腐蚀行为及硫化物膜的生长 被引量:49
1
作者 杨怀玉 陈家坚 +1 位作者 曹楚南 曹殿珍 《中国腐蚀与防护学报》 CAS CSCD 2000年第1期1-7,共7页
利用交流阻抗(EIS)和极化曲线 ,结合扫描电镜 (SEM)和能谱分析 ,对常温下低碳钢在含H2 S的模拟炼厂常减压塔顶冷凝水中的腐蚀电化学行为和不同浸泡时间下硫化物膜的生长过程进行了研究。结果表明 ,H2 S对腐蚀反应的阴极过程有很大的促... 利用交流阻抗(EIS)和极化曲线 ,结合扫描电镜 (SEM)和能谱分析 ,对常温下低碳钢在含H2 S的模拟炼厂常减压塔顶冷凝水中的腐蚀电化学行为和不同浸泡时间下硫化物膜的生长过程进行了研究。结果表明 ,H2 S对腐蚀反应的阴极过程有很大的促进作用 ,搅拌条件下尤甚 ;随介质pH值升高 ,其腐蚀性减弱。腐蚀浸泡初期 (小于 8h) ,电极表面硫化物膜的生长遵循抛物线机制 ,随浸泡时间的延长 ,硫化物膜变得疏松、易于破裂和脱落 ,并出现二次生长、修复过程 ,最终达到膜生长和溶解的平衡。实验条件下电极表面所生成的硫化物膜 。 展开更多
关键词 交流阻抗 极化曲线 腐蚀 硫化物膜 硫化 缓蚀
下载PDF
碳钢在生物膜和硫化物膜下的电化学腐蚀行为 被引量:3
2
作者 董泽华 郭兴蓬 +1 位作者 郑家燊 许立铭 《电化学》 CAS CSCD 2001年第2期173-179,共7页
应用丝束电极技术比较了SRB生物膜以及硫化物膜对Q2 35碳钢腐蚀过程的影响机制 ,采用电位、电流扫描技术测试了生物膜和FeS膜下的碳钢腐蚀不均匀性特征 ,发现由于膜的导电性致使表面电位扫描已不能作为膜下局部腐蚀的判据 .动电位扫描... 应用丝束电极技术比较了SRB生物膜以及硫化物膜对Q2 35碳钢腐蚀过程的影响机制 ,采用电位、电流扫描技术测试了生物膜和FeS膜下的碳钢腐蚀不均匀性特征 ,发现由于膜的导电性致使表面电位扫描已不能作为膜下局部腐蚀的判据 .动电位扫描表明无氧近中性溶液中 ,硫化物膜对碳钢具有一定保护作用 .电化学阻抗谱显示 ,硫化物膜电容增加缓慢 ,其极化电阻Rp 随时间呈先增后降的趋势 .与硫化物膜相比 ,生物膜表现出极大的电容 (10 4 ~ 10 5μF/cm2 ) ,且膜电容随时间呈S型增加 ,而极化电阻Rp 则呈指数下降 。 展开更多
关键词 生物 硫酸盐还原菌 碳钢 丝束电极 面电位/电流分布 电化学阻抗谱 电化学腐蚀 硫化物膜
下载PDF
模拟炼油环境中Q235钢和Cr5Mo钢表面硫化物膜稳定性及动态冲刷腐蚀行为研究 被引量:2
3
作者 刘贵群 郑玉贵 +4 位作者 姜胜利 荆军航 董伟娟 曾宏 司品宪 《中国腐蚀与防护学报》 CAS CSCD 北大核心 2015年第2期122-128,共7页
通过静态浸泡腐蚀实验装置和高温动态冲刷实验装置分别研究了硫化物膜在多种模拟炼油介质中的稳定性以及动态冲刷条件下Q235钢和Cr5Mo钢的耐冲刷腐蚀性能。结果表明,硫化物膜的形成过程是一个动态平衡过程。在无硫补充的条件下,硫化物... 通过静态浸泡腐蚀实验装置和高温动态冲刷实验装置分别研究了硫化物膜在多种模拟炼油介质中的稳定性以及动态冲刷条件下Q235钢和Cr5Mo钢的耐冲刷腐蚀性能。结果表明,硫化物膜的形成过程是一个动态平衡过程。在无硫补充的条件下,硫化物膜快速溶解。动态冲刷作用下,Cr5Mo钢耐动态环烷酸冲刷腐蚀性能明显好于Q235钢,溶液酸值越大两者的差别越明显。 展开更多
关键词 环烷酸腐蚀 减二线馏分油 硫化物膜 冲刷腐蚀
原文传递
全固态锂硫电池电极及电解质膜的制备及性能研究
4
作者 吕忠伟 彭锦雪 +1 位作者 郑陈熙 龚正良 《电源技术》 CAS 北大核心 2024年第4期622-627,共6页
全固态锂硫电池(ASSLSBs)兼具高能量密度与高安全性,被认为是最具潜力的下一代储能体系候选者之一,然而目前实验室使用的粉末冷压技术并不适合实际应用。因此,开发合适的工艺大规模制备固态电解质膜以及复合正极对促进全固态锂硫电池的... 全固态锂硫电池(ASSLSBs)兼具高能量密度与高安全性,被认为是最具潜力的下一代储能体系候选者之一,然而目前实验室使用的粉末冷压技术并不适合实际应用。因此,开发合适的工艺大规模制备固态电解质膜以及复合正极对促进全固态锂硫电池的实际化应用具有重要意义。以二甲苯作为溶剂,苯乙烯-乙烯-丁烯-苯乙烯嵌段共聚物(SEBS)作为粘结剂,通过浆料涂布工艺制备了具有高离子电导率(4.7×10^(-4) S/cm)的自支撑硫化物固态电解质膜以及高硫含量(50%质量分数)、高硫载量(4~5 mg/cm^(2))的复合硫正极极片,并研究了其性能。研究表明:SEBS质量分数为3%时,电解质膜兼具柔性及高离子电导率;SEBS质量分数为1%的复合硫正极极片表现出良好的电化学性能。使用固态电解质膜与复合正极极片组装的全固态锂硫电池首次放电比容量可达742.9 mAh/g。 展开更多
关键词 全固态锂硫电池 自支撑 硫化物电解质 硫正极极片
下载PDF
H_2S环境中液化石油气球罐用16MnR钢的腐蚀特性 被引量:2
5
作者 唐建群 巩建鸣 +1 位作者 姜勇 耿鲁阳 《机械工程材料》 CAS CSCD 北大核心 2011年第9期52-57,共6页
利用动电位极化和电化学阻抗谱技术,研究了液化石油气球罐用16MnR钢在含H_2S溶液中的腐蚀特性。结果表明:溶液中H_2S含量和pH值对16MnR钢的腐蚀具有较大影响,腐蚀速率随H_2S含量的增加和pH值的降低而不断加快,在pH值较低的溶液中,随浸... 利用动电位极化和电化学阻抗谱技术,研究了液化石油气球罐用16MnR钢在含H_2S溶液中的腐蚀特性。结果表明:溶液中H_2S含量和pH值对16MnR钢的腐蚀具有较大影响,腐蚀速率随H_2S含量的增加和pH值的降低而不断加快,在pH值较低的溶液中,随浸泡时间的延长,容抗弧半径不断减小,钢一直处于溶解状态;随pH值升高,容抗弧半径随浸泡时间的延长而不断增大;随温度升高,腐蚀速率加快,钢表面所形成的硫化物膜与基体的附着性较差,不能有效阻止钢遭受进一步的腐蚀。 展开更多
关键词 动电位极化 交流阻抗 16MNR钢 H2S 硫化物膜
下载PDF
减二线馏分油中炼厂常用钢材的动态冲刷腐蚀行为
6
作者 刘贵群 张小丽 +2 位作者 吕广磊 屈定荣 耿桂宏 《材料保护》 CAS CSCD 北大核心 2019年第1期22-26,39,共6页
为了更好地解决炼厂在流动条件下减二线馏分油对管路的腐蚀问题,研究了流动条件下Q235碳钢和Cr5Mo合金钢的耐环烷酸和硫冲刷腐蚀性能,并与炼厂常用钢材渗铝碳钢和304不锈钢进行比较。结果表明:Cr5Mo钢的腐蚀速率明显小于Q235钢的,酸值... 为了更好地解决炼厂在流动条件下减二线馏分油对管路的腐蚀问题,研究了流动条件下Q235碳钢和Cr5Mo合金钢的耐环烷酸和硫冲刷腐蚀性能,并与炼厂常用钢材渗铝碳钢和304不锈钢进行比较。结果表明:Cr5Mo钢的腐蚀速率明显小于Q235钢的,酸值越大两者的腐蚀差别越明显(酸值>5 mg KOH/g);随着酸值和硫含量的增大,Q235钢腐蚀速率有明显增大的趋势; Cr5Mo钢的腐蚀速率随着酸值的增大基本保持不变,甚至有一定的下降;相比于Q235(腐蚀速率6.3 mm/a)和Cr5Mo钢(腐蚀速率1.5 mm/a),渗铝碳钢和304不锈钢表现出优异的耐冲刷腐蚀性能,渗铝碳钢腐蚀速率为0.2 mm/a,而304不锈钢几乎没有失重。 展开更多
关键词 环烷酸腐蚀 减二线馏分油 硫化物膜 冲刷腐蚀 炼厂常用钢材
下载PDF
硫酸盐还原菌对碳钢腐蚀的影响研究 被引量:5
7
作者 许立铭 董泽华 +1 位作者 罗逸 范汉香 《华中理工大学学报》 CSCD 北大核心 1996年第4期78-81,共4页
研究了SRB在无氧气氛下对碳钢的腐蚀作用,以API培养基为基础的腐蚀失重试验表明,在接种SRB后,碳钢腐蚀速度明显下降,而当加入Fe2+离子后,SRB的繁殖速度明显加快,且腐蚀速度的增加幅度更大,进一步的研究结果显示... 研究了SRB在无氧气氛下对碳钢的腐蚀作用,以API培养基为基础的腐蚀失重试验表明,在接种SRB后,碳钢腐蚀速度明显下降,而当加入Fe2+离子后,SRB的繁殖速度明显加快,且腐蚀速度的增加幅度更大,进一步的研究结果显示,碳钢在此条件下的腐蚀速度与SRB的数量和活性并无直接的关系,而主要在于细菌繁殖过程和钢铁腐蚀过程中。 展开更多
关键词 细菌腐蚀 硫酸盐还原菌 碳钢 硫化物膜
下载PDF
船用大功率柴油机缸套表面抗擦伤处理技术
8
作者 刘宏亮 郭现超 《内燃机配件》 2007年第1期3-4,共2页
本文论述了缸套擦伤机理及为提高抗擦伤能力所进行的工艺试验,从而阐述了提高缸套质量的新途径和新思路。
关键词 擦伤 拉缸 硫氮共渗 硫化物膜 复合层 减磨
下载PDF
Protein and non-protein sulfhydryls and disulfides in gastric mucosa and liver after gastrotoxic chemicals and sucralfate: Possible new targets of pharmacologic agents 被引量:6
9
作者 Lajos Nagy Miki Nagata Sandor Szabo 《World Journal of Gastroenterology》 SCIE CAS CSCD 2007年第14期2053-2060,共8页
AIM: To investigate the role of major non-protein and protein sulfhydryls and disulfides in chemically induced gastric hemorrhagic mucosal lesions (HML) and the mechanism of gastroprotective effect of sucralfate.ME... AIM: To investigate the role of major non-protein and protein sulfhydryls and disulfides in chemically induced gastric hemorrhagic mucosal lesions (HML) and the mechanism of gastroprotective effect of sucralfate.METHODS: Rats were given 1 mL of 75% ethanol, 25%NaCl, 0.6 mol/L HCI, 0.2 mol/L NaOH or 1% ammonia solutions intragastrically (i.g.) and sacrificed 1, 3, 6 or 12 min later. Total (reduced and oxidized) glutathione (GSH + GSSG), glutathione disulfide (GSSG), protein free sulfhydryls (PSH), protein-glutathione mixed disulfides (PSSG) and protein cystine disulfides (PSSP) were measured in gastric mucosa and liver.RESULTS: Reduced glutathione (GSH) was depleted in the gastric mucosa after ethanol, HCI or NaCl exposure,while oxidized glutathione (GSSG) concentrations increased, except by HCI and NaOH exposure. Decreased levels of PSH after exposure to ethanol were observed,NaCl or NaOH while the total protein disulfides were increased. Ratios of reduced to oxidized glutathione or sulfhydrils to disulfides were decreased by all chemicals.No changes in thiol homeostasis were detected in the liver after i.g. abbreviation should be spelled out the first time here administration of ethanol. Sucralfate increased the concentrations of GSH and PSH and prevented the ethanol-induced changes in gastric mucosal thiol concentrations.CONCLUSION: Our modified methods are now suitable for direct measurements of major protein and nonprotein thiols/disulfides in the gastric mucosa or liver.A common element in the pathogenesis of chemically induced HML and in the mechanism of gastroprotective drugs seems to be the decreased ratios of reduced and oxidized glutathione as well as protein sulfhydryls and disulfides. 展开更多
关键词 Non-protein and protein thiol Gastricmucosal injury GASTROPROTECTION Sucralfate
下载PDF
The Electro-Physical Properties of Rhenium Chalcogenides' Thin Films 被引量:2
10
作者 Salakhova Elza Majidzadeh Vusala Ibraghimova Kamala Kalantarova Parvana 《Journal of Chemistry and Chemical Engineering》 2013年第6期518-521,共4页
The electro-physical properties of thin layers of rhenium chalcogenides' alloys, their dynamical and static ampere-voltaic characteristics were investigated. During the investigation of static and dynamical ampere-vo... The electro-physical properties of thin layers of rhenium chalcogenides' alloys, their dynamical and static ampere-voltaic characteristics were investigated. During the investigation of static and dynamical ampere-voltaic characteristics of rectifying contact of aluminium and rhenium chalcogenides' alloys the switching effects were found. 展开更多
关键词 ELECTROCHEMISTRY thin films rhenium chalcogenides.
下载PDF
Novel Palladium (II) Selective Membrane Electrode Based on Phenyl Disulfide
11
作者 Kasim K. Alasedi Mohanad H. Halboos Aayad A. Sayhood 《Journal of Chemistry and Chemical Engineering》 2013年第6期502-507,共6页
PVC (a poly vinyl chloride) membrane was prepared by using phenyl disulfide as a carrier for selective determination of Pd (II) ion. The membrane can be worked well over a wide concentration range (1.0 × 106... PVC (a poly vinyl chloride) membrane was prepared by using phenyl disulfide as a carrier for selective determination of Pd (II) ion. The membrane can be worked well over a wide concentration range (1.0 × 106-1.0 × 10-1) M with a slope 29.53 mV/decade and a limit of detection (1.77× 10-7) M. The measured of response time was 9 s. It was found to be selective and useable within the pH range (3.0-7.0). The lifetime of membrane sensor prepared could be used for at least 4 months. The electrode was successfully used as an indicator electrode in potentiometric titration of palladium ion with EDTA. 展开更多
关键词 PVC membrane phenyl disulfide palladium (II) electrode limit of detection LIFETIME potentiometric titration.
下载PDF
Bandgap-tunable lateral and vertical heterostructures based on monolayer Mo1-xWxS2 alloys 被引量:3
12
作者 Yu Kobayashi Shohei Mori +1 位作者 Yutaka Maniwa Yasumitsu Miyata 《Nano Research》 SCIE EI CAS CSCD 2015年第10期3261-3271,共11页
The fabrication of heterostructures of two-dimensional semiconductors with specific bandgaps is an important approach to realizing the full potential of these materials in electronic and optoelectronic devices. Severa... The fabrication of heterostructures of two-dimensional semiconductors with specific bandgaps is an important approach to realizing the full potential of these materials in electronic and optoelectronic devices. Several groups have recently reported the direct growth of lateral and vertical heterostructures based on monolayers of typical semiconducting transition metal dichalcogenides (TMDCs) such as WSe2, MoSe2, WS2, and MoS2. Here, we demonstrate the single-step direct growth of lateral and vertical heterostructures based on bandgap-tunable Mo1-xWxS2 alloy monolayers by the sulfurization of patterned thin films of WO3 and MoO3. These patterned films are capable of generating a wide variety of concentration gradients by the diffusion of transition metals during the crystal growth phase. Under high temperatures, this leads to the formation of monolayer crystals of Mo1-xWxS2 alloys with various compositions and bandgaps, depending on the positions of the crystals on the substrates. Heterostructures of these alloys are obtained through stepwise changes in the ratio of W/Mo within a single domain during low-temperature growth. The stabilization of the monolayer Mo1-xWxS2 alloys, which often degrade even under gentle conditions, was accomplished by coating the alloys with other monolayers. The present findings demonstrate an efficient means of both studying and optimizing the optical and electrical properties of TMDC-based heterostructures to allow use of the materials in future device applications. 展开更多
关键词 transition metaldichalcogenide Mo1-xWxS2 alloy HETEROSTRUCTURE thin-film sulfurization photoluminescence stability
原文传递
Research on structural characteristics of large-scale CdS thin films deposited by CBD under low ammonia condition
13
作者 薛玉明 高林 +5 位作者 尹富红 乔在祥 刘浩 冯少君 孙海涛 杭伟 《Optoelectronics Letters》 EI 2015年第4期273-276,共4页
Cadmium sulfide(Cd S) buffer layers with the scale of 10 cm×10 cm are deposited by chemical bath deposition(CBD) with different temperatures and thiourea concentrations under low ammonia condition.There are obvio... Cadmium sulfide(Cd S) buffer layers with the scale of 10 cm×10 cm are deposited by chemical bath deposition(CBD) with different temperatures and thiourea concentrations under low ammonia condition.There are obvious hexagonal phases and cubic phases in Cd S thin films under the conditions of low temperature and high thiourea concentration.The main reason is that the heterogeneous reaction is dominant for homogeneous reaction.At low temperature,Cd S thin films with good uniformity and high transmittance are deposited by adjusting the thiourea concentration,and there is almost no precipitation in reaction solution.In addition,the low temperature is desired in assembly line.The transmittance and the band gap of Cd S thin films are above 80% and about 2.4 e V,respectively.These films are suitable for the buffer layers of large-scale Cu(In,Ga)Se2(CIGS) solar cells. 展开更多
关键词 ammonia transmittance hexagonal CIGS thiourea assembly cubic uniformity adjusting sulfide
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部