Experiment and dynamic simulation were combined to obtain the loads on bicycle frame. A dynamic model of body-bicycle system was built in ADAMS. Then the body gestures under different riding conditions were captured b...Experiment and dynamic simulation were combined to obtain the loads on bicycle frame. A dynamic model of body-bicycle system was built in ADAMS. Then the body gestures under different riding conditions were captured by a motion analysis system. Dynamic simulation was carried out after the data of body motions were input into the simulation system in ADAMS and a series of loads that the body applied on head tube, seat pillar and bottom bracket were obtained. The results show that the loads on flame and their distribution are apparently different under various riding conditions. Finally, finite element analysis was done in ANSYS, which showed that the stress and its distribution on frame were apparently different when the flame was loaded according to the bicycle testing standard and simulation respectively. An efficient way to obtain load on bicycle flame accurately was proposed, which is sig- nificant for the safety of cycling and will also be the basis for the bicycle design of digitalization, lightening and cus- tomization.展开更多
The effect of signal modulating noise in bistable stochastic resonance systems was studied theoretically and experimentally. A mathematical analysis was made on the bistable stochastic resonance model with small syste...The effect of signal modulating noise in bistable stochastic resonance systems was studied theoretically and experimentally. A mathematical analysis was made on the bistable stochastic resonance model with small system parameters. An analogue circuit was designed to perform the effect. The effect of signal modulating noise was shown in the analog simulation experiment. The analog experiment was conducted for two sinusoidal signals with different frequencies. The results show that there are a sinusoidal component corresponding to the input sinusoidal signal and a noise component presented as a Wiener process corresponding to the input white noise in the system output. By properly selecting system parameters, the effect of signal modulating noise can be manifested in the system output.展开更多
In this paper,a generic retailer-oriented portfolio simulation system linking manufacturer,retailer,and customer in apparel supply chain is presented.The purpose of the simulator is to generate a portfolio consisting ...In this paper,a generic retailer-oriented portfolio simulation system linking manufacturer,retailer,and customer in apparel supply chain is presented.The purpose of the simulator is to generate a portfolio consisting of replenishment strategy and performance index under different sales forecasting errors to satisfy the retailer-defined customer service level in apparel industry.After analyzing the main parameters in the portfolio simulator,the procedure and detailed structure of the simulator are then described.With the use of data from the industry,one case study of the portfolio simulator is achieved and the process of the simulation is validated.展开更多
With the rapid development of computer graphics, distributed-computing and Internet, it is possible to achieve Internet-based virtual city. This paper dwells on the method of the terrain and its feature modeling and c...With the rapid development of computer graphics, distributed-computing and Internet, it is possible to achieve Internet-based virtual city. This paper dwells on the method of the terrain and its feature modeling and complex entity modeling in the virtual city. Then, discusses the method for Internet-based virtual city 3D visualization and the design of the Browser/Server architecture of the system of virtual city in the network environment. Finally, Java and Java 3D are used to show an experiment example, and the related conclusion about Internet-based virtual city 3D displaying and the client-side interactive operation is given.展开更多
It is presented that a feasibility assessment of solar preheating of steam boiler feed water for opened vapor systems. Data from a medium sized dairy industry near Rio de Janeiro city, in Brazil, is used to compose a ...It is presented that a feasibility assessment of solar preheating of steam boiler feed water for opened vapor systems. Data from a medium sized dairy industry near Rio de Janeiro city, in Brazil, is used to compose a case study. Forty eight solar heating system computer simulations were carried out in TRNSYS （transient system simulation software）, for a range of design parameters corresponding to the 5% best economic results of a series of 2,700 simpler simulations （φ,f-chart method）, programmed on Matlab. It has been used TMY （typical meteorological year） hourly weather data from Rio de Janeiro. Investment cost was composed from both commercial and literature values, while revenue was based on the avoided consumption of fuel for LPG （liquefied petroleum gas）, natural gas and fuel oil, with only the first showing economically feasible. The results, however, made it possible to address environmentally sound public policies to encourage industrial solar energy use.展开更多
This paper describes a stabilization effect after installating an adjustable speed generator (ASG) in a multi machine power system. A personal computer based ASG module has been de veloped for the simulations in...This paper describes a stabilization effect after installating an adjustable speed generator (ASG) in a multi machine power system. A personal computer based ASG module has been de veloped for the simulations in parallel with the analog power system simulator i n the Research Laboratory of the Kyushu Electric Power Co. The three phase ins t antaneous value based ASG model has been developed in the Matlab/Simulink envir onment for its detailed and real time simulations, which have been performed on a digital signal processor (DSP) board with AD and DA conversion interfaces inst alled in a personal computer (PC). Simulational results indicate the hig hly improved overall stability of the multi machine power system after installa ting the ASG.展开更多
Many distributed clouds which try to integrate the advantages of centralized clouds and distributed systems have been studied in recent years.Traditional cloud simulators focus on large scale data centers with virtual...Many distributed clouds which try to integrate the advantages of centralized clouds and distributed systems have been studied in recent years.Traditional cloud simulators focus on large scale data centers with virtualized servers,and cannot meet the needs of distributed cloud simulations.This paper introduces a generalized and extensible simulation framework,named MCloudSim,which is used for modeling and simulating distributed clouds.MCloudSim has the following characteristics;(1)the overlay protocol in MCloudSim can be freely replaced without affecting the function of other modules;(2) a Petri net workflow theory based task model is proposed to simulate distributed tasks;(3) a distributed cloud can be easily built by assembling and expanding the basic resource entities provided by MCloudSim.Finally,simulation results of scenarios with a 3-tier central-controlled distributed cloud and a P2 P based cloud prove that MCloudSim has high efficiency and satisfies performance in supporting large scale experiments and different distributed clouds.展开更多
Based on the theory of random process and the characteristic of the functioning of a system component subject to a certain specific probability distribution, emulated the whole process of system production on Iongwall...Based on the theory of random process and the characteristic of the functioning of a system component subject to a certain specific probability distribution, emulated the whole process of system production on Iongwall face was emulated, in which the methods of time pace and computer random emulation were adopted. The paper provides an objective basis for the analysis of a mining Iongwall face and the varied lines of effectiveness, machine stoppage rate and coal flow of components and system, and output etc.lt also offers some theories to improve productivity by discussing the application of the transformation plan and optimization of reasonable coal stock capacity, as well as selection of system equipment and matching optimization.展开更多
Preliminary design and simulation of a free piston engine suitable for small-scale energy production in distributed energy systems is presented in this paper.The properties,particularly the properties of gas seals of ...Preliminary design and simulation of a free piston engine suitable for small-scale energy production in distributed energy systems is presented in this paper.The properties,particularly the properties of gas seals of the engine are simulated using a simulation program developed for this case,and the results are utilized in preliminary main design parameter selection.The engine simulation program was developed by combining and modifying the source codes of the simulation and calculation programs obtained from Helsinki University of Technology,Tampere University of Technology,and Lappeenranta University of Technology.Because of the contact-free labyrinth seal used in the piston,the efficiency of the motor is lower than the efficiency of a conventional motor with oil lubricated piston rings.On the other hand,the lack of bearing losses,and the lack of losses associated with a crankshaft system and a gearbox,as well as the lack of lubrication oil expenses,compensates this effect.As a net result,this new motor would perform slightly better than the conventional one.Being completely oil-free,it is very environmentally friendly,and its exhaust gases are completely free of oil residuals which are causing problems in normal gas motors.展开更多
Command Decision Simulation （CDS） is not only an important and difficult issue in the field of simulation, but also a technique issue to be tackled in the course of collective Modeling and Simulation in Joint Operat...Command Decision Simulation （CDS） is not only an important and difficult issue in the field of simulation, but also a technique issue to be tackled in the course of collective Modeling and Simulation in Joint Operations Experiment Center. CDS can give support to all kinds of simulation. Using computer to realize the Blue side＇s command deci- sion automatic execution in the operation training simulation system can improve training effect. Using computer to realize the lower level command unit＇s automatic command deci- sion can help to reduce the number of controllers and release them from heavy work. It can also enlarge simulation scale and increase the freedom of the simulation entity especially the command entity, thus enhance the authenticity and credibility of the simulation. Ac- cording to the command decision structure and the Joint Intention Theory, the thesis puts forward the method of making use of Coordination Matrix （CM） to realizing cooperation among the entities in CDS and constructs the calculation sketch of Task Execution, Task Monitoring and Task Replanning. At the same time, the thesis brings forward the CDS structure vision based on Partial Global Planning（PGP）. As CM is an indispensable part of combat simulation, the theory and the method of CDS will become an important part for the theory of Combat Simulation.展开更多
基金Supported by Special Fund Project for Technology Innovation of Tianjin (No. 10FDZDGX00500)Tianjin Product Quality Inspection Technology Research Institute (No. 11-03)
文摘Experiment and dynamic simulation were combined to obtain the loads on bicycle frame. A dynamic model of body-bicycle system was built in ADAMS. Then the body gestures under different riding conditions were captured by a motion analysis system. Dynamic simulation was carried out after the data of body motions were input into the simulation system in ADAMS and a series of loads that the body applied on head tube, seat pillar and bottom bracket were obtained. The results show that the loads on flame and their distribution are apparently different under various riding conditions. Finally, finite element analysis was done in ANSYS, which showed that the stress and its distribution on frame were apparently different when the flame was loaded according to the bicycle testing standard and simulation respectively. An efficient way to obtain load on bicycle flame accurately was proposed, which is sig- nificant for the safety of cycling and will also be the basis for the bicycle design of digitalization, lightening and cus- tomization.
基金Project (10276032) supportedjointly by the National Natural Science Foundation of China and by the Science Foundationof China Academy of Engineering Physics NSAFproject(2005038228) supported by Postdoctoral Science Foundation of China projectsupported by the Postdoctoral Science Foundation of Central South University(2005)
文摘The effect of signal modulating noise in bistable stochastic resonance systems was studied theoretically and experimentally. A mathematical analysis was made on the bistable stochastic resonance model with small system parameters. An analogue circuit was designed to perform the effect. The effect of signal modulating noise was shown in the analog simulation experiment. The analog experiment was conducted for two sinusoidal signals with different frequencies. The results show that there are a sinusoidal component corresponding to the input sinusoidal signal and a noise component presented as a Wiener process corresponding to the input white noise in the system output. By properly selecting system parameters, the effect of signal modulating noise can be manifested in the system output.
文摘In this paper,a generic retailer-oriented portfolio simulation system linking manufacturer,retailer,and customer in apparel supply chain is presented.The purpose of the simulator is to generate a portfolio consisting of replenishment strategy and performance index under different sales forecasting errors to satisfy the retailer-defined customer service level in apparel industry.After analyzing the main parameters in the portfolio simulator,the procedure and detailed structure of the simulator are then described.With the use of data from the industry,one case study of the portfolio simulator is achieved and the process of the simulation is validated.
文摘With the rapid development of computer graphics, distributed-computing and Internet, it is possible to achieve Internet-based virtual city. This paper dwells on the method of the terrain and its feature modeling and complex entity modeling in the virtual city. Then, discusses the method for Internet-based virtual city 3D visualization and the design of the Browser/Server architecture of the system of virtual city in the network environment. Finally, Java and Java 3D are used to show an experiment example, and the related conclusion about Internet-based virtual city 3D displaying and the client-side interactive operation is given.
文摘It is presented that a feasibility assessment of solar preheating of steam boiler feed water for opened vapor systems. Data from a medium sized dairy industry near Rio de Janeiro city, in Brazil, is used to compose a case study. Forty eight solar heating system computer simulations were carried out in TRNSYS （transient system simulation software）, for a range of design parameters corresponding to the 5% best economic results of a series of 2,700 simpler simulations （φ,f-chart method）, programmed on Matlab. It has been used TMY （typical meteorological year） hourly weather data from Rio de Janeiro. Investment cost was composed from both commercial and literature values, while revenue was based on the avoided consumption of fuel for LPG （liquefied petroleum gas）, natural gas and fuel oil, with only the first showing economically feasible. The results, however, made it possible to address environmentally sound public policies to encourage industrial solar energy use.
文摘This paper describes a stabilization effect after installating an adjustable speed generator (ASG) in a multi machine power system. A personal computer based ASG module has been de veloped for the simulations in parallel with the analog power system simulator i n the Research Laboratory of the Kyushu Electric Power Co. The three phase ins t antaneous value based ASG model has been developed in the Matlab/Simulink envir onment for its detailed and real time simulations, which have been performed on a digital signal processor (DSP) board with AD and DA conversion interfaces inst alled in a personal computer (PC). Simulational results indicate the hig hly improved overall stability of the multi machine power system after installa ting the ASG.
基金Supported by the National High Technology Research and Development Programme of China(No.2011AA01A102)National Natural Science Foundation of China(No.60903218)+1 种基金Strategic Priority Research Program of Chinese Academy of Sciences(No.XDA06010301)Innovative Program of Institute of Acoustics,Chinese Academy of Sciences(No.Y154211601)
文摘Many distributed clouds which try to integrate the advantages of centralized clouds and distributed systems have been studied in recent years.Traditional cloud simulators focus on large scale data centers with virtualized servers,and cannot meet the needs of distributed cloud simulations.This paper introduces a generalized and extensible simulation framework,named MCloudSim,which is used for modeling and simulating distributed clouds.MCloudSim has the following characteristics;(1)the overlay protocol in MCloudSim can be freely replaced without affecting the function of other modules;(2) a Petri net workflow theory based task model is proposed to simulate distributed tasks;(3) a distributed cloud can be easily built by assembling and expanding the basic resource entities provided by MCloudSim.Finally,simulation results of scenarios with a 3-tier central-controlled distributed cloud and a P2 P based cloud prove that MCloudSim has high efficiency and satisfies performance in supporting large scale experiments and different distributed clouds.
基金Supported by the Special Topics of Major Scientific and Technological Research Projects Shanxi Province (2006031099-01)Youth Science Funds of Shanxi Province (2006021024)Science and Technology Project of Taiyuan City (07010728)
文摘Based on the theory of random process and the characteristic of the functioning of a system component subject to a certain specific probability distribution, emulated the whole process of system production on Iongwall face was emulated, in which the methods of time pace and computer random emulation were adopted. The paper provides an objective basis for the analysis of a mining Iongwall face and the varied lines of effectiveness, machine stoppage rate and coal flow of components and system, and output etc.lt also offers some theories to improve productivity by discussing the application of the transformation plan and optimization of reasonable coal stock capacity, as well as selection of system equipment and matching optimization.
基金Project is financed by the Technology Development Center of Finland (Tekes)
文摘Preliminary design and simulation of a free piston engine suitable for small-scale energy production in distributed energy systems is presented in this paper.The properties,particularly the properties of gas seals of the engine are simulated using a simulation program developed for this case,and the results are utilized in preliminary main design parameter selection.The engine simulation program was developed by combining and modifying the source codes of the simulation and calculation programs obtained from Helsinki University of Technology,Tampere University of Technology,and Lappeenranta University of Technology.Because of the contact-free labyrinth seal used in the piston,the efficiency of the motor is lower than the efficiency of a conventional motor with oil lubricated piston rings.On the other hand,the lack of bearing losses,and the lack of losses associated with a crankshaft system and a gearbox,as well as the lack of lubrication oil expenses,compensates this effect.As a net result,this new motor would perform slightly better than the conventional one.Being completely oil-free,it is very environmentally friendly,and its exhaust gases are completely free of oil residuals which are causing problems in normal gas motors.
基金This project is supported by National Natnral Science Foundation of China（40601059）.
文摘Command Decision Simulation （CDS） is not only an important and difficult issue in the field of simulation, but also a technique issue to be tackled in the course of collective Modeling and Simulation in Joint Operations Experiment Center. CDS can give support to all kinds of simulation. Using computer to realize the Blue side＇s command deci- sion automatic execution in the operation training simulation system can improve training effect. Using computer to realize the lower level command unit＇s automatic command deci- sion can help to reduce the number of controllers and release them from heavy work. It can also enlarge simulation scale and increase the freedom of the simulation entity especially the command entity, thus enhance the authenticity and credibility of the simulation. Ac- cording to the command decision structure and the Joint Intention Theory, the thesis puts forward the method of making use of Coordination Matrix （CM） to realizing cooperation among the entities in CDS and constructs the calculation sketch of Task Execution, Task Monitoring and Task Replanning. At the same time, the thesis brings forward the CDS structure vision based on Partial Global Planning（PGP）. As CM is an indispensable part of combat simulation, the theory and the method of CDS will become an important part for the theory of Combat Simulation.
