期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
量匙精确控制超硬石膏水粉比灌注义齿修复模型临床应用观察
1
作者 周利根 郭天文 李冬梅 《口腔颌面修复学杂志》 2008年第2期115-118,共4页
目的:利用量匙精确控制超硬石膏水粉比灌注义齿修复工作模型,保证模型质量,节约资源。方法:通过测量、统计临床灌模的超硬石膏粉用量进行分类,以此为设计并制作量匙,临床试用并调整。量匙组、熟练技工手工组为实验组,标准下颌组为对照组... 目的:利用量匙精确控制超硬石膏水粉比灌注义齿修复工作模型,保证模型质量,节约资源。方法:通过测量、统计临床灌模的超硬石膏粉用量进行分类,以此为设计并制作量匙,临床试用并调整。量匙组、熟练技工手工组为实验组,标准下颌组为对照组,采用SPSS13.0统计软件单样本t检验进行精度和硬度比较,以P<0.05认为有统计学意义。结果:量匙设计为半球形,内径大小依次为29.91mm、28.29mm、26.46mm;量匙组精度和表面硬度与标准下颌模型比较无差异(P>0.05),手工组精度和表面硬度与标准下颌模型比较有明显差异(P<0.05)。结论:量匙可精确控制超硬石膏水粉比,保证模型精度和硬度,提高义齿修复体的质量。 展开更多
关键词 超硬石膏 量匙 水粉比
下载PDF
建议开发两种量取固态农药的小药械
2
作者 陈轶 《农药快讯》 2003年第1期11-11,共1页
关键词 开发 固态农药 药械 农药专用稀释瓶 量匙 推广
下载PDF
刍议如何通过双级差变牙花编码的方法减少锁具互开率 被引量:1
3
作者 周会林 《科技创新与应用》 2012年第08Z期3-3,共1页
以往在我国大部分的锁具生产制造行业里基本上是采用购买国外锁具自已进行测绘仿制生产的模式,但国外制锁行业与我国制锁行业相比,不论在工业基础上还是设备精确度都比国内同行业要先进许多。本文综述了在目前我国锁具制造行业,广大锁... 以往在我国大部分的锁具生产制造行业里基本上是采用购买国外锁具自已进行测绘仿制生产的模式,但国外制锁行业与我国制锁行业相比,不论在工业基础上还是设备精确度都比国内同行业要先进许多。本文综述了在目前我国锁具制造行业,广大锁具设计开发人员在锁具设计及生产时需要了解的一些锁具编码互开率的计算及如何在设计前期结合编码设计最简单有效地减少锁具互开率的方法。 展开更多
关键词 锁壳 锁芯 级差值
下载PDF
High Frequency Communication Network with Diversity: System Structure and Key Enabling Techniques 被引量:4
4
作者 Kun Xu Bin Jiang +4 位作者 Zeyou Su Shengqing Wang Makun Guo Xiao Li Zhiyong Du 《China Communications》 SCIE CSCD 2018年第9期46-59,共14页
High frequency sky wave communication suffers from poor performance including poor link quality and low link success rate. To enhance performance, diversity technology is proposed in the high frequency communication n... High frequency sky wave communication suffers from poor performance including poor link quality and low link success rate. To enhance performance, diversity technology is proposed in the high frequency communication network(HFCN) in this paper.First, we present the benefits and the challenges by introducing diversity technology into the existing HFCN. Secondly, to exploit the benefits fully and overcome the challenges, we propose a system structure suitable for deploying diversity technology in HFCN in large scale,based on the cloud radio access network and software defined network. Moreover, we present a general structure for the real-time updating frequency management system that plays a more important role especially when resource consuming(e.g., frequency) diversity technology is deployed. Thirdly, we investigate the key techniques enabling diversity technology deployment. Finally, we point out the future research directions to help the HFCN with diversity work more efficiently and intelligently. 展开更多
关键词 high frequency high frequency communication network diversity technology access layer and core layer frequency management system
下载PDF
Improved multiparty quantum key agreement in travelling mode
5
作者 Wei Huang Qi Su +4 位作者 BingJie Xu Bin Liu Fan Fan HengYue Jia YingHui Yang 《Science China(Physics,Mechanics & Astronomy)》 SCIE EI CAS CSCD 2016年第12期12-21,共10页
The need to simultaneously balance security and fairness in quantum key agreement(QKA) makes it challenging to design a flawless QKA protocol, especially a multiparty quantum key agreement(MQKA) protocol. When designi... The need to simultaneously balance security and fairness in quantum key agreement(QKA) makes it challenging to design a flawless QKA protocol, especially a multiparty quantum key agreement(MQKA) protocol. When designing an MQKA protocol,two modes can be used to transmit the quantum information carriers: travelling mode and distributed mode. MQKA protocols usually have a higher qubit efficiency in travelling mode than in distributed mode. Thus, several travelling mode MQKA protocols have been proposed. However, almost all of these are vulnerable to collusion attacks from internal betrayers. This paper proposes an improved MQKA protocol that operates in travelling mode with Einstein-Podolsky-Rosen pairs. More importantly, we present a new travelling mode MQKA protocol that uses single photons, which is more feasible than previous methods under current technologies. 展开更多
关键词 quantum cryptography multiparty quantum key agreement travelling mode cryptanalysis and improvement
原文传递
Passive measurement-device-independent quantum key distribution with orbital angular momentum and pulse position modulation 被引量:2
6
作者 王潋 周媛媛 +1 位作者 周学军 陈霄 《Optoelectronics Letters》 EI 2018年第2期138-142,共5页
Based on the orbital angular momentum and pulse position modulation, we present a novel passive measurement-device-independent quantum key distribution(MDI-QKD) scheme with the two-mode source. Combining with the tigh... Based on the orbital angular momentum and pulse position modulation, we present a novel passive measurement-device-independent quantum key distribution(MDI-QKD) scheme with the two-mode source. Combining with the tight bounds of the yield and error rate of single-photon pairs given in our paper, we conduct performance analysis on the scheme with heralded single-photon source. The numerical simulations show that the performance of our scheme is significantly superior to the traditional MDI-QKD in the error rate, key generation rate and secure transmission distance, since the application of orbital angular momentum and pulse position modulation can exclude the basis-dependent flaw and increase the information content for each single photon. Moreover, the performance is improved with the rise of the frame length. Therefore, our scheme, without intensity modulation, avoids the source side channels and enhances the key generation rate. It has greatly utility value in the MDI-QKD setups. 展开更多
关键词 QKD MDI OAM
原文传递
High-performance hardware architecture of elliptic curve cryptography processor over GF(2^(163))
7
作者 Yong-ping DAN Xue-cheng ZOU +2 位作者 Zheng-lin LIU Yu HAN Li-hua YI 《Journal of Zhejiang University-Science A(Applied Physics & Engineering)》 SCIE EI CAS CSCD 2009年第2期301-310,共10页
We propose a novel high-performance hardware architecture of processor for elliptic curve scalar multiplication based on the Lopez-Dahab algorithm over GF(2^163) in polynomial basis representation. The processor can... We propose a novel high-performance hardware architecture of processor for elliptic curve scalar multiplication based on the Lopez-Dahab algorithm over GF(2^163) in polynomial basis representation. The processor can do all the operations using an efficient modular arithmetic logic unit, which includes an addition unit, a square and a carefully designed multiplication unit. In the proposed architecture, multiplication, addition, and square can be performed in parallel by the decomposition of computation. The point addition and point doubling iteration operations can be performed in six multiplications by optimization and solution of data dependency. The implementation results based on Xilinx VirtexⅡ XC2V6000 FPGA show that the proposed design can do random elliptic curve scalar multiplication GF(2^163) in 34.11 μs, occupying 2821 registers and 13 376 LUTs. 展开更多
关键词 Elliptic curve cryptography (ECC) Scalar multiplication Hardware implementation
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部