JJF(吉)126-2023《量水器校准规范》解读

文章着重阐述了JJF(吉)126-2023《量水器校准规范》的编制背景、主要内容,并对校准时应注意的事项进行了详细介绍,便于校准人员在校准工作中正确执行该规范。

基于感应节水器、中水回收的节水性能探析高校节水路径

在创建节水型高校过程中,用户用水终端全部更换了带感应系统或装置的水嘴、淋浴花洒和冲水阀门,每次出水量符合GB/T 31436二级以上标准,人均节水量超过省人均用水定额的50%,节水效果明显。中水回收系统的建设受到高校的广泛重视,中水回用系统的优势是占地面积少,建设工艺简单、造价低,杂排水经过回收处理后,符合GB/T 18902-2002标准,可用于绿化浇灌和冲厕用水,此项年节水量可占全年用水量的38.8%,大大节省了自来水的用水量。在高校中开挖人工湖,利用人工湖积蓄雨水,用蓄积的雨水浇灌花木。雨水回收是高校节水的长远之策,雨水回收经处理可以成为优质杂排水,随着节水技术不断提高,其替代自来水的作用越来越显著,同时人工湖对提升景观和区域生态效果明显,缺点是占地面积较大。为了尽快取得高校节水环保成果,合同节水管理模式必不可少,利用第三方资本和提供的专业技术服务签约收益分成比例,以保证节水项目短期内顺利建成并投入使用。高校应加强节水宣传,提高节水意识,使节水行动物化于形、内化于心。

水泥净浆量水器校准方法研究

介绍了水泥净浆量水器的用途、校准方法和注意事项，从环境条件、检测设备、操作环节等方面分析了影响校准结果的主要因素，提出了相应的控制措施，为水泥标准稠度用水量的准确判定提供了技术依据，可为保证水泥检测工作的有效性、提高检测效率与稳定性提供参考。

翻斗式自计量水技术

通过对传统量水技术与翻斗式自计量水技术的比较 ,说明了翻斗式量水工艺的技术特点及量测原理 ,指出了翻斗式量水是一种结构简单、运行管理方便、测量结果准确的量水方法。在小流域潜流、泉水研究与开发中及径流小区的人工模拟降雨实验中都具有广泛的应用前景。

Depth Classification of Underwater Targets Based on Complex Acoustic Intensity of Normal Modes

In order to solve the problem of depth classification of the underwater target in a very low frequency acoustic field, the active component of cross spectra of particle pressure and horizontal velocity （ACCSPPHV） is adopted to distinguish the surface vessel and the underwater target. According to the effective depth of a Pekeris waveguide, the placing depth forecasting equations of passive vertical double vector hydrophones are proposed. Numerical examples show that when the sum of depths of two hydro- phones is the effective depth, the sign distribution of ACCSPPHV has nothing to do with horizontal distance; in addition, the sum of the first critical surface and the second critical surface is equal to the effective depth. By setting the first critical surface less than the difference between the effective water depth and the actual water depth, that is, the second critical surface is greater than the actual depth, the three positive and negative regions of the whole ocean volume are equivalent to two positive and negative regions and therefore the depth classification of the underwater target is obtained. Besides, when the 20 m water depth is taken as the first critical surface in the simulation of underwater targets （40 Hz, 50 Hz, and 60 Hz respectively）, the effectiveness of the algorithm and the cor- reemess of relevant conclusions are verified, and the analysis of the corresponding forecasting performance is conducted.

Design and research on a variable ballast system for deep-sea manned submersibles

Variable ballast systems are necessary for manned submersibles to adjust their buoyancy.In this paper,the design of a variable ballast system for a manned submersible is described.The variable ballast system uses a super high pressure hydraulic seawater system.A super high pressure seawater pump and a deep-sea brushless DC motor are used to pump seawater into or from the variable ballast tank,increasing or decreasing the weight of the manned submersible.A magnetostrictive linear displacement transducer can detect the seawater level in the variable ballast tank.Some seawater valves are used to control pumping direction and control on-off states.The design and testing procedure for the valves is described.Finally,the future development of variable ballast systems and seawater hydraulic systems is projected.

Adjusting precipitation measurements from the TRwS204 automatic weighing gauge in the Qilian Mountains, China

With the popularity of the automatic precipitation gauges in national weather stations,testing their performance and adjusting their measurements are top priorities. Additionally,because different climatic conditions may have different effects on the performance of the precipitation gauges, it is also necessary to test the gauges in different areas. This study mainly analyzed precipitation measurements from the single-Altershielded TRwS204 automatic weighing gauge(TRwS_(SA)) relative to the adjusted manual measurements(reference precipitation) from the Chinese standard precipitation gauge in a doublefence wind shield(CSPG_(DF)) in the Hulu watershed in the Qilian Mountains, China. The measurements were compared over the period from August 2014 to July2017, and the transfer function derived from the work by Kochendorfer et al.(2017 a) for correcting windinduced losses was applied to the TRwS_(SA) measurements. The results show that the average loss of TRwS_(SA) measurements relative to the reference precipitation decreased from 0.55 mm(10.7%) to 0.51 mm(9.9%) for rainfall events, from 0.35 mm(8.5%)to 0.22 mm(5.3%) for sleet events, and from 0.49 mm(18.9%) to 0.33 mm(12.7%) for snowfall events after adjustment. The uncorrected large biases of TRwS_(SA) measurements are considered to be mainly caused by specific errors of TRwS_(SA), different gauge orifice area and random errors. These types of errors must be considered when comparing precipitation measurements for different gauge types, especially in the mountains.

Calibration Method of Capacitive Soil Moisture Sensor

Soil properties and water content vary from place to place. The calibration method based on capacitive soil moisture and humidity sensor is carried out. The sensor readings are compared with the mass water content measured by the oven dried method,and the calibration formula of sensor reading and mass moisture content is established.Results show that the sensor reading has a good linear relationship with the mass water content measured by the oven dried method,and has high precision. It can calibrate the mass moisture content of the data obtained from the moisture migration test in the soil column.

A novel method for measuring the moisture content of coal powder by microwave resonator

A novel technique for the quick measurement moisture content of coal powder by microwave was studied. The effects of the various moisture contents on the measurement results were also discussed. The experimental results show that the standard deviation is less than 0.36% when the moisture content of coal powder is 0.74%-16.90% and the standard deviation is less than 0.16% when the moisture content is 0.31%-1.49%. The experimental results indicate that a process of quick measurement moisture content of coal powder by microwave is practical.

Development of a power control system for AUVs probing for underwater mineral resources

Valuable mineral resources are widely distributed throughout the seabed. autonomous underwater vehicles (AUVs) are preferable to remotely-operated vehicles (ROVs) when probing for such mineral resources as the extensive exploration area makes it difficult to maintain contact with operators. AUVs depend on batteries, so their power consumption should be reduced to extend exploration time. Power for conventional marine instrument systems is incorporated in their waterproof sealing. External intermittent control of this power source until termination of exploration is challenging due to limitations imposed by the underwater environment. Thus, the AUV must have a power control system that can improve performance and maximize use of battery capacity. The authors developed such a power control system with a three-step algorithm. It automatically detects underwater operational states and can limit power, effectively decreasing power consumption by about 15%.

Application of empirical mode decomposition based energy ratio to vortex flowmeter state diagnosis

To improve the measurement performance, a method for diagnosing the state of vortex flowmeter under various flow conditions was presented. The raw sensor signal of the vortex flowmeter was adaptively decomposed into intrinsic mode functions using the empirical mode decomposition approach. Based on the empirical mode decomposition results, the energy of each intrinsic mode function was extracted, and the vortex energy ratio was proposed to analyze how the perturbation in the flow affected the measurement performance of the vortex flowmeter. The relationship between the vortex energy ratio of the signal and the flow condition was established. The results show that the vortex energy ratio is sensitive to the flow condition and ideal for the characterization of the vortex flowmeter signal. Moreover, the vortex energy ratio under normal flow condition is greater than 80%, which can be adopted as an indicator to diagnose the state of a vortex flowmeter.

Experimental research on influence of emulsifier on crystallization quantity of emulsion explosives under dynamic pressure

Dynamic pressure was applied on emulsion explosive by using an underwater explosion measuring apparatus, and the crystallization quantity was measured by dissolution method after emulsion explosive was pressed; the influence of emulsi- fier content and type was analyzed. The experimental results show that emulsifier content and type have an important effect on crystallization quantity of emulsion explosive. The crystallization quantity will reduce with Span-g0 content from 2% to 4%, so the demulsification and crystallization will decrease if the emulsifier content improves appropriately and the dynamic pressure resistance will increase. For emulsion explosive emulsified by T-152 and Span-g0, the crystallization quantity with T-152 is less than that of Span-g0 under the same dynamic pressure. This shows that the emulsifying effect ofT-152 is better than Soan-80.

Inverse displacement analysis of the general six degree-of-freedom serial robot based on optimization method

The paper presents a new solution of inverse displacement analysis of the general six degree-of-freedom serial robot.The inverse displacement analysis of the general serial robot is transformed into a minimization problem and then the optimization method is adopted to solve the nonlinear least squares problem with the analytic form of new Jacobian matrix.In this way,joint variables of the general serial robot can be searched out quickly under the desired precision when positions of the three non-collinear end effector points are given.Compared with the general Newton iterative method,the proposed algorithm can search out the solution when the robot is at the singular configuration and the initial configuration used in the optimization method may also be the singular configuration.So the convergence domain is bigger than that of the general Newton iterative method.Another advantage of the proposed algorithm is that positions of the three non-collinear end effector points are usually much easier to be measured than the orientation of the end effector.The inverse displacement analysis of the general 6R(six-revolute-joint) serial robot is illustrated as an example and the simulation results verify the efficiency of the proposed algorithm.Because the three non-collinear points can be selected at random,the method can be applied to any other types of serial robots.

Influence on the hydrodynamic performance of a variable vector propeller of different rules of pitch angle change

To design a more effective blade pitch adjustment mechanism,research was done on changes to the hydrodynamic characteristics of VVPs(Variable Vector Propeller) caused by different rules for changing pitch angle. A mathematical method for predicting the hydrodynamic characteristics of a VVP under unsteady conditions is presented based on the panel method. Mathematical models for evaluation based on potential flow theory and the Green theorem are also presented. The hydrodynamic characteristics are numerically predicted. To avoid gaps between panels,hyperboloidal quadrilateral panels were used. The pressure Kutta condition on the trailing edge of the VVP blade was satisfied by the Newton-Raphson iterative procedure. The influence coefficients of the panels were calculated by Morino's analytical formulations to improve numerical calculation speed,and the method developed by Yanagizawa was used to eliminate the point singularity on derivation calculus while determining the velocities on propeller surfaces. The calculation results show that it's best for the hydrodynamic characteristics of the VVP that pitch angle changes follow the sine rule.

Measurement of water holdup in oil-in-water emulsions in wellbores using microwave resonance sensor

In this study,we propose a new method for water holdup measurement of oil-in-water emulsions with a microwave resonance sensor(MRS).The angle and length of the electrode plate are optimized by HFSS simulation software.Using a vector network analyzer(VNA),a static calibration experiment is conducted,and the resonant frequency distribution of oil-in-water emulsions is analyzed within an 80%–100%water holdup range.In addition,we observe and analyze the micron-sized oil bubble structure in the emulsifi ed state with an optical microscope.On this basis,a dynamic experiment of oil-in-water emulsions with high water cut and low velocity in a vertical upward pipe is conducted.S_(21) response curves of the MRS are obtained by the VNA under diff erent working conditions in real time.Finally,we analyze the relationship between the resonant frequency and water cut.Experimental results show that the MRS has an average resolution of 0.096%water cut for high water cut oil-in-water emulsions within the frequency range of 2.2–2.8 GHz.

Predicting and Classifying User Identification Code System Based on Support Vector Machines

In digital fingerprinting, preventing piracy of images by colluders is an important and tedious issue. Each image will be embedded with a unique User IDentification （UID） code that is the fingerprint for tracking the authorized user. The proposed hiding scheme makes use of a random number generator to scramble two copies of a UID, which will then be hidden in the randomly selected medium frequency coefficients of the host image. The linear support vector machine （SVM） will be used to train classifications by calculating the normalized correlation （NC） for the 2class UID codes. The trained classifications will be the models used for identifying unreadable UID codes. Experimental results showed that the success of predicting the unreadable UID codes can be increased by applying SVM. The proposed scheme can be used to provide protections to intellectual property rights of digital images aad to keep track of users to prevent collaborative piracies.

Construction of an ultra-deep diaphragm wall:a case study

This paper presents a case study on an ultra-deep diaphragm wall with a depth of 110 m constructed in Ningbo City. The in-situ application shows that using Bauer BC40 cutter machine in conjunction with cutter wheels specified for different strata would be qualified for constructing the 110 m diaphragm wall with high efficiency and precision given that the quality of slurry and poured concrete can be guaranteed. The ground settlement can be effectively controlled by using the overlapping construction method. Sliding failure as a whole characterized by pronounced lateral deformation is likely to occur in the upper muddy clay layer due to its high compressibility and sensitivity. In contrast, local collapse of trench walls tends to happen in the sandy silt strata. Furthermore, careful attention should be paid to sandy silt during the entire construction period as the vertical displacement of the sandy silt continues to develop even atter concrete pouring.

Effects of nutrients and light intensity on the growth and biochemical composition of a marine microalga Odontella aurita

Algal biotechnology has advanced greatly in the past three decades. Many microalgae are now cultivated to produce bioactive substances. Odontella aurita is a marine diatom industrially cultured in outdoor open ponds and used for human nutrition. For the first time, we have systematically investigated the effects of culture conditions in cylindrical glass columns and fiat-plate photobioreactors, including nutrients （nitrogen, phosphorus, silicon, and sulfur）, light intensity and light path, on O. aurita cell growth and biochemical composition （protein, carbohydrate, β-1,3-glucan, lipids, and ash）. The optimal medium for photoautotrophic cultivation of O. aurita contained 17.65 mmol/L nitrogen, 1.09 mmol/L phosphorus, 0.42 mmol/L silicon, and 24.51 mmol/L sulfur, yielding a maximum biomass production of 6.1-6.8 g/L and 6.7-7.8 g/L under low and high light, respectively. Scale-up experiments were conducted with fiat-plate photobioreactors using different light-paths, indicating that a short light path was more suitable for biomass production of O. aurita. Analyses of biochemical composition showed that protein content decreased while carbohydrate （mainly composed of 15-1,3-glucan） increased remarkably to about 50% of dry weight during the entire culture period. The highest lipid content （19.7% of dry weight） was obtained under 0.11 mmol/L silicon and high light conditions at harvest time. Fatty acid profiles revealed that 80% were Cx4, C^6, and C20, while arachidonic acid and eicosapentaenoic acid （EPA） accounted for 1.6%-5.6% and 9%-20% of total fatty acids, respectively. High biomass production and characteristic biochemical composition profiles make O. aurita a promising microalga for the production ofbioactive components, such as EPA and D-1,3-glucan.