The separation between s- and p-polarization components invariably affects thin film edge filters used for tilted incidence and is a difficult problem for many applications, especially for optical communication. This ...The separation between s- and p-polarization components invariably affects thin film edge filters used for tilted incidence and is a difficult problem for many applications, especially for optical communication. This paper presents a novel design method to obtain edge filters with non-polarization at incidence angle of 45°. The polarization separation at 50% trans-mittance for a long-wave-pass filter and a short-wave-pass filter is 0.3 nm and 0.1 nm respectively. The design method is based on a broadband Fabry-Perot thin-film interference filter in which the higher or lower interference band at both sides of the main transmittance peak can be used for initial design of long-wave-pass filter or short-wave-pass filter and then can be refined to reduce the transmittance ripples. The spacer 2H2L2H or 2L2H2L of the filter is usually taken. Moreover, the method for expanding the bandwidth of rejection and transmission is explained. The bandwidth of 200 nm for both rejection region and transmission band is obtained at wavelength 1550 nm. In this way, the long-wave-pass and short-wave-pass edge filters with zero separation between two polarization components can easily be fabricated.展开更多
We propose a novel optical polarizer based on an asymmetric dual-core photonic crystal fiber(PCF) with triangular lattice air-holes.The fiber is designed as that the effective indices of modes in the two cores are mat...We propose a novel optical polarizer based on an asymmetric dual-core photonic crystal fiber(PCF) with triangular lattice air-holes.The fiber is designed as that the effective indices of modes in the two cores are matched at one polarized state but mismatched at another polarized state.As a result,one of the polarization states is coupled to the other core and transferred into a high-order mode.The transmission properties of the polarizer are investigated by the semi-vectorial beam propagation method(SV-BPM).Numerical results demonstrate that a device length of 11.3 mm shows extinction ratio as low as-20 dB with bandwidth as great as 80 nm ranging from 1.51 mm to 1.59 mm.展开更多
基金Project (No. 60078001) supported by the National Natural ScienceFoundation of China
文摘The separation between s- and p-polarization components invariably affects thin film edge filters used for tilted incidence and is a difficult problem for many applications, especially for optical communication. This paper presents a novel design method to obtain edge filters with non-polarization at incidence angle of 45°. The polarization separation at 50% trans-mittance for a long-wave-pass filter and a short-wave-pass filter is 0.3 nm and 0.1 nm respectively. The design method is based on a broadband Fabry-Perot thin-film interference filter in which the higher or lower interference band at both sides of the main transmittance peak can be used for initial design of long-wave-pass filter or short-wave-pass filter and then can be refined to reduce the transmittance ripples. The spacer 2H2L2H or 2L2H2L of the filter is usually taken. Moreover, the method for expanding the bandwidth of rejection and transmission is explained. The bandwidth of 200 nm for both rejection region and transmission band is obtained at wavelength 1550 nm. In this way, the long-wave-pass and short-wave-pass edge filters with zero separation between two polarization components can easily be fabricated.
基金supported by the National Natural Science Foundation of China (No.10904051)the China Postdoctoral Science Foundation (Nos.20080441070 and 200902505) the Jiangsu Planned Projects for Postdoctoral Research Funds (No.0802018B)
文摘We propose a novel optical polarizer based on an asymmetric dual-core photonic crystal fiber(PCF) with triangular lattice air-holes.The fiber is designed as that the effective indices of modes in the two cores are matched at one polarized state but mismatched at another polarized state.As a result,one of the polarization states is coupled to the other core and transferred into a high-order mode.The transmission properties of the polarizer are investigated by the semi-vectorial beam propagation method(SV-BPM).Numerical results demonstrate that a device length of 11.3 mm shows extinction ratio as low as-20 dB with bandwidth as great as 80 nm ranging from 1.51 mm to 1.59 mm.
