This paper reports the surface morphology and I-V curves of porous silicon （PS） samples and related devices. The observed fabrics on the PS surface were found to affect the electrical property of PS devices. When th...This paper reports the surface morphology and I-V curves of porous silicon （PS） samples and related devices. The observed fabrics on the PS surface were found to affect the electrical property of PS devices. When the devices were operated under different external bias （10 V or 3 V） for 10 min, their observed obvious differences in electrical properties may be due to the different control mechanisms in the A1/PS interface and PS matrix morphology.展开更多
Slope failure in loess terrains of Northern China during spring thawing period is closely related to the freeze-thaw cycling that surface soils inevitably experienced. Field surveys were carried out on natural and art...Slope failure in loess terrains of Northern China during spring thawing period is closely related to the freeze-thaw cycling that surface soils inevitably experienced. Field surveys were carried out on natural and artificial slopes in thirteen surveying sites located in the Northern Shaanxi, the center of Loess Plateau, covering five characteristic topographic features including tablelands, ridges, hills, gullies and valleys. Based on the scale that is involved in freeze-thaw cycling, the induced failures can be classified into three main modes, i.e., erosion, peeling and thaw collapse, depending on both high porosity and loose cementation of loess that is easily affected. Model tests on loess slopes with gradients of 53.1°, 45.0° and 33.7° were carried out to reveal the heat transfer, water migration and deformation during slope failure. The surface morphology of slopes was photographed, with flake shaped erosion and cracks noted. For three slope models, time histories for the thermal regime exhibit three obvious cycles of freeze and thaw andthe maximum frost depth develops downwards as freeze-thaw cycling proceeds. Soil water in the unfrozen domain beneath was migrated towards the slope surface, as can be noticed from the considerable change in the unfrozen water content, almost synchronous with the variation of temperature. The displacement in both vertical and horizontal directions varies over time and three obvious cycles can be traced. The residual displacement for each cycle tends to grow and the slopes with higher gradients are more sensitive to potentially sliding during freeze-thaw cycling.展开更多
SAPO-34 molecular sieves were synthesized directly by hydrothermal method with rice husk ash(RHA)used as the silicon source.The crystal structure,composition,surface morphology and acidity of the synthesized products ...SAPO-34 molecular sieves were synthesized directly by hydrothermal method with rice husk ash(RHA)used as the silicon source.The crystal structure,composition,surface morphology and acidity of the synthesized products weresieves had a high crystallinity,without any impure phase.Compared with the SAPO-34 prepared by the silica sol,RHA-SAPO-34 had similar acid properties in strength.The methanol to olefins(MTO)experiments showed that the SAPO-34molecular sieve synthesized from RHA exhibited both a good catalytic activity and ethylene selectivity.展开更多
Twenty one joints were made with Brazilian tests and each surface was scanned by the Talysurf CLI 2000. Morphological characteristics of joint surface were quantified by statistical and textural parameters. By the con...Twenty one joints were made with Brazilian tests and each surface was scanned by the Talysurf CLI 2000. Morphological characteristics of joint surface were quantified by statistical and textural parameters. By the contrast of these parameters between both sides of each coupled joint, the following conclusions are drawn. The upper and lower surfaces of coupled joints have approximately equal values of Sp（maximum height of joint surface）, Sa（arithmetic mean height of joint surface） and Sq（root mean square height of joint surface）, but the Ssk（skewness of the height distribution of joint surface） values of the two surfaces of a coupled joint are different, one is positive while the other is negative. The Saj（auto-correlation length） parameter values of both surfaces of each coupled joint are quite close, and the S^（texture aspect ratio） values have the same situation to the Sal parameter, but the same parameters of different surfaces have big differences which illustrates its own characteristics of each joint. The two surfaces of each coupled joint have similar values of θp （mean profile angle） which can be used to deduce the value of θp each other.展开更多
Objective The purpose of this study was to compare computed tomography(CT) and magnetic resonance imaging(MRI) for the detection of mandibular condylar osteochondroma.Methods Preoperative CT and MRI of 33 patients wit...Objective The purpose of this study was to compare computed tomography(CT) and magnetic resonance imaging(MRI) for the detection of mandibular condylar osteochondroma.Methods Preoperative CT and MRI of 33 patients with unilateral condylar osteochondroma were reviewed. The morphology, location, continuity with the parent bone, cartilage cap, perichondrium of tumors, and changes in soft and hard tissues adjacent to the lesions were investigated by two reviewers. Data were analyzed using Mc Nemar test. A P value < 0.05 was considered significant.Results Among the 33 condylar osteochondromas, 11 were of the diffuse type, 10 were of the sessile type, and 12 were of the pedunculated type. Continuity with the cortex and marrow of the host condyle was observed on both CT and MRI. Both modalities had identical detection rates of surface reconstruction of the temporal bone joint, condylar dislocation, and pseudarthrosis formation. However, MRI showed significantly higher detection rates of the cartilage cap and perichondrium than CT(P < 0.05). Furthermore, MRI showed ipsilateral and contralateral temporo-mandibular joint(TMJ) disc displacement in 4 cases and 6 cases, respectively, and ipsilateral and contralateral TMJ effusion in 20 cases and 14 cases, respectively.Conclusion CT can intuitively display the morphology and spatial location of condylar osteochondromas through three-dimensional reconstruction. MRI may be superior to CT in the detection of cartilage cap, perichondrium of the condylar osteochondroma, and changes in the TMJ and adjacent soft tissues.展开更多
It is observed by scanning tunneling microscopy (STM) that theadsorbed Benzotriazole (BTA) on copper is long in shape and has anirregular rectangle. The growth of BTA on copper is in the form ofpolymeric chain and mai...It is observed by scanning tunneling microscopy (STM) that theadsorbed Benzotriazole (BTA) on copper is long in shape and has anirregular rectangle. The growth of BTA on copper is in the form ofpolymeric chain and mainly in one dimension rather than twodimensions. The copper surface covered by BTA becomes flatter,smoother and the roughness was smaller than that of bare copper, sothe corrosion is largely decreased. However, many grooves can be seenbetween BTA polymeric chains in which corrosion may exist to adegree.展开更多
A detailed understanding of the composition,buffering capacity,surface charge property,and metals leaching behavior of bauxite residue is the key to improved management,both in reducing the environmental impact and us...A detailed understanding of the composition,buffering capacity,surface charge property,and metals leaching behavior of bauxite residue is the key to improved management,both in reducing the environmental impact and using the material as an industrial by-product for other applications.In this study,physical,chemical,and surface charge properties of bauxite residue derived from a combined process were investigated.Results indicated that the main alkaline solids in bauxite residue were katoite,sodalite,and calcite.These minerals also lead to a higher acid neutralizing capacity of bauxite residue.Acid neutralizing capacity(ANC)to pH 7.0 of this residue is about 0.9 mol H^+/kg solid.Meanwhile,the Fe-,Al-,and Si-containing minerals in bauxite residue resulted in an active surface;The isoelectric point(IEP)and point of zero charge(PZC)were 7.88 and 7.65,respectively.This also leads to a fact that most of the metals in bauxite residue were adsorbed by these surface charged solids,which makes the metals not readily move under natural or even moderately acidic conditions.The leaching behavior of metals as a function of pH indicated that the metals in bauxite residue present low release concentrations(pH>3).展开更多
The interaction between fluvial and aeolian processes can significantly change surface morphology of the Earth. Taking the Horqin Sandy Land as the research area and using Landsat series satellite remote sensing image...The interaction between fluvial and aeolian processes can significantly change surface morphology of the Earth. Taking the Horqin Sandy Land as the research area and using Landsat series satellite remote sensing images, this study utilizes geomorphology and landscape ecology to monitor and analyze the aeolian geomorphology characteristics of the Horqin Sandy Land. Results show that the sand dunes of the Horqin Sandy Land are mainly distributed on alluvial plains along the banks of the mainstream and tributaries of the Western Liao River, and the sand dune types tend to simplify from west to east and from south to north. The aeolian geomorphology coverage tend to be decreasing in the past 40 years, with an average annual change rate of 0.31%. While the area of traveling dunes decreased, the area of fixed and semi-fixed dunes increased. The fractal dimensions of various types of sand dune have all remained relatively constant between 1.07 and 1.10, suggesting that they are experiencing a relatively stable evolutionary process. There is a complex interaction between fluvial and aeolian processes of the Horqin Sandy Land, which plays a central role in surface landscape molding. Sand dunes on both sides of different rivers on the Horqin Sandy Land present certain regularity and different characteristics in terms of morphology, developmental scale, and spatial pattern. There are six fluvial-aeolian interaction modes in this area: supply of sand sources by rivers for sand dune development, complete obstruction of dune migration by rivers, partial obstruction of dune migration by rivers, influence of river valleys on dune developmental types on both sides, influence of river valleys on dune developmental scale on both sides, and river diversion due to obstruction and forcing by sand dunes. This study deepens our understanding of the surface process mechanism of the interaction between fluvial and aeolian processes in semi-arid regions, and provides a basis for researches on regional landscape responses in the context of global environmental change.展开更多
基金Project supported by the Natural Science Foundation of China (No.60225010) and the Key Project of Chinese Ministry of Education
文摘This paper reports the surface morphology and I-V curves of porous silicon （PS） samples and related devices. The observed fabrics on the PS surface were found to affect the electrical property of PS devices. When the devices were operated under different external bias （10 V or 3 V） for 10 min, their observed obvious differences in electrical properties may be due to the different control mechanisms in the A1/PS interface and PS matrix morphology.
基金financially supported by the National Natural Science Foundation of China (Grant Nos. 51478385, 51208409, 51778528 and 51408486)
文摘Slope failure in loess terrains of Northern China during spring thawing period is closely related to the freeze-thaw cycling that surface soils inevitably experienced. Field surveys were carried out on natural and artificial slopes in thirteen surveying sites located in the Northern Shaanxi, the center of Loess Plateau, covering five characteristic topographic features including tablelands, ridges, hills, gullies and valleys. Based on the scale that is involved in freeze-thaw cycling, the induced failures can be classified into three main modes, i.e., erosion, peeling and thaw collapse, depending on both high porosity and loose cementation of loess that is easily affected. Model tests on loess slopes with gradients of 53.1°, 45.0° and 33.7° were carried out to reveal the heat transfer, water migration and deformation during slope failure. The surface morphology of slopes was photographed, with flake shaped erosion and cracks noted. For three slope models, time histories for the thermal regime exhibit three obvious cycles of freeze and thaw andthe maximum frost depth develops downwards as freeze-thaw cycling proceeds. Soil water in the unfrozen domain beneath was migrated towards the slope surface, as can be noticed from the considerable change in the unfrozen water content, almost synchronous with the variation of temperature. The displacement in both vertical and horizontal directions varies over time and three obvious cycles can be traced. The residual displacement for each cycle tends to grow and the slopes with higher gradients are more sensitive to potentially sliding during freeze-thaw cycling.
基金supported by the Cultivation Foundation of Northeast Petroleum University(2017PYYL-03)
文摘SAPO-34 molecular sieves were synthesized directly by hydrothermal method with rice husk ash(RHA)used as the silicon source.The crystal structure,composition,surface morphology and acidity of the synthesized products weresieves had a high crystallinity,without any impure phase.Compared with the SAPO-34 prepared by the silica sol,RHA-SAPO-34 had similar acid properties in strength.The methanol to olefins(MTO)experiments showed that the SAPO-34molecular sieve synthesized from RHA exhibited both a good catalytic activity and ethylene selectivity.
基金Project(51174228) supported by the National Natural Science Foundation of ChinaProject(2011ssxt275) supported by the Graduate Students’Thesis Innovation Foundation of Central South University,ChinaProject(11MX22) supported by the Central South University Students’ Innovation Foundation of the Mittal Company,China
文摘Twenty one joints were made with Brazilian tests and each surface was scanned by the Talysurf CLI 2000. Morphological characteristics of joint surface were quantified by statistical and textural parameters. By the contrast of these parameters between both sides of each coupled joint, the following conclusions are drawn. The upper and lower surfaces of coupled joints have approximately equal values of Sp（maximum height of joint surface）, Sa（arithmetic mean height of joint surface） and Sq（root mean square height of joint surface）, but the Ssk（skewness of the height distribution of joint surface） values of the two surfaces of a coupled joint are different, one is positive while the other is negative. The Saj（auto-correlation length） parameter values of both surfaces of each coupled joint are quite close, and the S^（texture aspect ratio） values have the same situation to the Sal parameter, but the same parameters of different surfaces have big differences which illustrates its own characteristics of each joint. The two surfaces of each coupled joint have similar values of θp （mean profile angle） which can be used to deduce the value of θp each other.
基金Supported by Shanghai Municipal Education Commission-Gaofeng Clinical Medicine Grant(No.20152225)Shanghai Hospital Development Center Research Grant(No.SHDC12013103)
文摘Objective The purpose of this study was to compare computed tomography(CT) and magnetic resonance imaging(MRI) for the detection of mandibular condylar osteochondroma.Methods Preoperative CT and MRI of 33 patients with unilateral condylar osteochondroma were reviewed. The morphology, location, continuity with the parent bone, cartilage cap, perichondrium of tumors, and changes in soft and hard tissues adjacent to the lesions were investigated by two reviewers. Data were analyzed using Mc Nemar test. A P value < 0.05 was considered significant.Results Among the 33 condylar osteochondromas, 11 were of the diffuse type, 10 were of the sessile type, and 12 were of the pedunculated type. Continuity with the cortex and marrow of the host condyle was observed on both CT and MRI. Both modalities had identical detection rates of surface reconstruction of the temporal bone joint, condylar dislocation, and pseudarthrosis formation. However, MRI showed significantly higher detection rates of the cartilage cap and perichondrium than CT(P < 0.05). Furthermore, MRI showed ipsilateral and contralateral temporo-mandibular joint(TMJ) disc displacement in 4 cases and 6 cases, respectively, and ipsilateral and contralateral TMJ effusion in 20 cases and 14 cases, respectively.Conclusion CT can intuitively display the morphology and spatial location of condylar osteochondromas through three-dimensional reconstruction. MRI may be superior to CT in the detection of cartilage cap, perichondrium of the condylar osteochondroma, and changes in the TMJ and adjacent soft tissues.
基金Supported by Study Foundation of the Hong Kong Polytechnic University.
文摘It is observed by scanning tunneling microscopy (STM) that theadsorbed Benzotriazole (BTA) on copper is long in shape and has anirregular rectangle. The growth of BTA on copper is in the form ofpolymeric chain and mainly in one dimension rather than twodimensions. The copper surface covered by BTA becomes flatter,smoother and the roughness was smaller than that of bare copper, sothe corrosion is largely decreased. However, many grooves can be seenbetween BTA polymeric chains in which corrosion may exist to adegree.
基金Projects(41501350,41461071,31860170)supported by the National Natural Science Foundation of China
文摘A detailed understanding of the composition,buffering capacity,surface charge property,and metals leaching behavior of bauxite residue is the key to improved management,both in reducing the environmental impact and using the material as an industrial by-product for other applications.In this study,physical,chemical,and surface charge properties of bauxite residue derived from a combined process were investigated.Results indicated that the main alkaline solids in bauxite residue were katoite,sodalite,and calcite.These minerals also lead to a higher acid neutralizing capacity of bauxite residue.Acid neutralizing capacity(ANC)to pH 7.0 of this residue is about 0.9 mol H^+/kg solid.Meanwhile,the Fe-,Al-,and Si-containing minerals in bauxite residue resulted in an active surface;The isoelectric point(IEP)and point of zero charge(PZC)were 7.88 and 7.65,respectively.This also leads to a fact that most of the metals in bauxite residue were adsorbed by these surface charged solids,which makes the metals not readily move under natural or even moderately acidic conditions.The leaching behavior of metals as a function of pH indicated that the metals in bauxite residue present low release concentrations(pH>3).
基金Under the auspices of Natural National Science Foundation of China(No.41671002,41401002)
文摘The interaction between fluvial and aeolian processes can significantly change surface morphology of the Earth. Taking the Horqin Sandy Land as the research area and using Landsat series satellite remote sensing images, this study utilizes geomorphology and landscape ecology to monitor and analyze the aeolian geomorphology characteristics of the Horqin Sandy Land. Results show that the sand dunes of the Horqin Sandy Land are mainly distributed on alluvial plains along the banks of the mainstream and tributaries of the Western Liao River, and the sand dune types tend to simplify from west to east and from south to north. The aeolian geomorphology coverage tend to be decreasing in the past 40 years, with an average annual change rate of 0.31%. While the area of traveling dunes decreased, the area of fixed and semi-fixed dunes increased. The fractal dimensions of various types of sand dune have all remained relatively constant between 1.07 and 1.10, suggesting that they are experiencing a relatively stable evolutionary process. There is a complex interaction between fluvial and aeolian processes of the Horqin Sandy Land, which plays a central role in surface landscape molding. Sand dunes on both sides of different rivers on the Horqin Sandy Land present certain regularity and different characteristics in terms of morphology, developmental scale, and spatial pattern. There are six fluvial-aeolian interaction modes in this area: supply of sand sources by rivers for sand dune development, complete obstruction of dune migration by rivers, partial obstruction of dune migration by rivers, influence of river valleys on dune developmental types on both sides, influence of river valleys on dune developmental scale on both sides, and river diversion due to obstruction and forcing by sand dunes. This study deepens our understanding of the surface process mechanism of the interaction between fluvial and aeolian processes in semi-arid regions, and provides a basis for researches on regional landscape responses in the context of global environmental change.
