TiC-TiB2-NiAl composites were fabricated by self-propagating high temperature reaction synthesis（SHS） with Ti, B4C, Ni and Al powders as raw materials. The effects of NiAl content on phase constituents and microstru...TiC-TiB2-NiAl composites were fabricated by self-propagating high temperature reaction synthesis（SHS） with Ti, B4C, Ni and Al powders as raw materials. The effects of NiAl content on phase constituents and microstructures were investigated. The results show that the reaction products are composed of TiB2, TiC and NiAl. The content of NiAl increases with the adding of Ni＋Al in green compacts. TiB2, TiC and NiAl grains present in different shapes in the matrix, TiB2 being in hexagonal or rectangular shapes, TiC in spherical shapes, and NiAl squeezed into the gaps of TiC and TiB2 grains. With the increase of NiAl content, the grains of TiC-TiB2-NiAl composites are refined, their density and compressive strength are improved, and the shapes of TiC grains become spherical instead of irregular ones. Finally, the fracture mechanism of the composites transforms from intergranular fracture mode to the compounded fracture mode of intergranular fracture and transgranular fracture.展开更多
SAPO-34 was synthesized with n-butylamine（BA） as a template for the first time.Crystallization temperature and initial Si amount were important factors leading to successful syntheses.Lamellar AlPO-kanemite tends to...SAPO-34 was synthesized with n-butylamine（BA） as a template for the first time.Crystallization temperature and initial Si amount were important factors leading to successful syntheses.Lamellar AlPO-kanemite tends to form as the major phase or as an impurity of SAPO-34 at lower crystallization temperatures,though a higher initial Si amount may offer a positive effect on the crystallization of SAPO-34 that mitigates the low temperature.Higher temperature（240℃） can effectively suppress the generation of lamellar materials and allow the synthesis of pure SAPO-34 with a wider range of Si incorporation.The crystallization processes at 200 and 240℃ were investigated and compared.We used the aminothermal method to synthesize SAPO-34-BA at 240℃ and also found n-propylamine is a suitable template for the synthesis of SAPO-34.The SAPO-34-BA products were characterized by many techniques.SAPO-34-BA has good thermal stability,crystallinity and porosity.BA remained intact in the crystals with ~1.8 BA molecule per chabazite cage.The catalytic performance of SAPO-34 was tested in the methanol amination reaction,which showed high methanol conversion and selectivity for methylamine plus dimethylamine under the conditions investigated,suggesting that this material is a good candidate for the synthesis of methylamines.展开更多
Combustion synthesis involving metallothermic reduction of Fe2O3 and TiO2 was conducted in the mode of self-propagating high-temperature synthesis(SHS)to fabricate FeAl-based composites with dual ceramic phases,TiB2/A...Combustion synthesis involving metallothermic reduction of Fe2O3 and TiO2 was conducted in the mode of self-propagating high-temperature synthesis(SHS)to fabricate FeAl-based composites with dual ceramic phases,TiB2/Al2O3 and TiC/Al2O3.The reactant mixture included thermite reagents of 0.6Fe2O3+0.6TiO2+2Al,and elemental Fe,Al,boron,and carbon powders.The formation of xFeAl−0.6TiB2−Al2O3 composites with x=2.0−3.6 and yFeAl−0.6TiC−Al2O3 composites with y=1.8−2.75 was studied.The increase of FeAl causes a decrease in the reaction exothermicity,thus resulting in the existence of flammability limits of x=3.6 and y=2.75 for the SHS reactions.Based on combustion wave kinetics,the activation energies of Ea=97.1 and 101.1 kJ/mol are deduced for the metallothermic SHS reactions.XRD analyses confirm in situ formation of FeAl/TiB2/Al2O3 and FeAl/TiC/Al2O3 composites.SEM micrographs exhibit that FeAl is formed with a dense polycrystalline structure,and the ceramic phases,TiB2,TiC,and Al2O3,are micro-sized discrete particles.The synthesized FeAl−TiB2−Al2O3 and FeAl−TiC−Al2O3 composites exhibit the hardness ranging from 12.8 to 16.6 GPa and fracture toughness from 7.93 to 9.84 MPa·m1/2.展开更多
In recent years, with the rapid development of polymer science, the application of classical named reactions has transferred from small-molecule compounds to polymers. The versatility of named reactions in terms of mo...In recent years, with the rapid development of polymer science, the application of classical named reactions has transferred from small-molecule compounds to polymers. The versatility of named reactions in terms of monomer selection, solvent environment, reaction temperature, and post-modification permits the synthesis of sophisticated macromolecular structures under conditions where other reaction processes will not operate. In this review, we divided the named reactions employed in polymer-chain synthesis into three types: transition metal-catalyzed cross-coupling reactions, metal-free cross-coupling reactions, and multi-components reactions. Thus, we focused our discussion on the progress in the utilization of these named reactions in polymer synthesis.展开更多
基金Projects(51072104,51272141)supported by the National Natural Science Foundation of ChinaProject(ts20110828)supported by Taishan Scholars Project of Shandong,China
文摘TiC-TiB2-NiAl composites were fabricated by self-propagating high temperature reaction synthesis（SHS） with Ti, B4C, Ni and Al powders as raw materials. The effects of NiAl content on phase constituents and microstructures were investigated. The results show that the reaction products are composed of TiB2, TiC and NiAl. The content of NiAl increases with the adding of Ni＋Al in green compacts. TiB2, TiC and NiAl grains present in different shapes in the matrix, TiB2 being in hexagonal or rectangular shapes, TiC in spherical shapes, and NiAl squeezed into the gaps of TiC and TiB2 grains. With the increase of NiAl content, the grains of TiC-TiB2-NiAl composites are refined, their density and compressive strength are improved, and the shapes of TiC grains become spherical instead of irregular ones. Finally, the fracture mechanism of the composites transforms from intergranular fracture mode to the compounded fracture mode of intergranular fracture and transgranular fracture.
基金supported by the National Natural Science Foundation of China(21676262,21476228,21506207)the Key Research Program of Frontier Sciences of CAS(QYZDB-SSW-JSC040)~~
文摘SAPO-34 was synthesized with n-butylamine（BA） as a template for the first time.Crystallization temperature and initial Si amount were important factors leading to successful syntheses.Lamellar AlPO-kanemite tends to form as the major phase or as an impurity of SAPO-34 at lower crystallization temperatures,though a higher initial Si amount may offer a positive effect on the crystallization of SAPO-34 that mitigates the low temperature.Higher temperature（240℃） can effectively suppress the generation of lamellar materials and allow the synthesis of pure SAPO-34 with a wider range of Si incorporation.The crystallization processes at 200 and 240℃ were investigated and compared.We used the aminothermal method to synthesize SAPO-34-BA at 240℃ and also found n-propylamine is a suitable template for the synthesis of SAPO-34.The SAPO-34-BA products were characterized by many techniques.SAPO-34-BA has good thermal stability,crystallinity and porosity.BA remained intact in the crystals with ~1.8 BA molecule per chabazite cage.The catalytic performance of SAPO-34 was tested in the methanol amination reaction,which showed high methanol conversion and selectivity for methylamine plus dimethylamine under the conditions investigated,suggesting that this material is a good candidate for the synthesis of methylamines.
文摘Combustion synthesis involving metallothermic reduction of Fe2O3 and TiO2 was conducted in the mode of self-propagating high-temperature synthesis(SHS)to fabricate FeAl-based composites with dual ceramic phases,TiB2/Al2O3 and TiC/Al2O3.The reactant mixture included thermite reagents of 0.6Fe2O3+0.6TiO2+2Al,and elemental Fe,Al,boron,and carbon powders.The formation of xFeAl−0.6TiB2−Al2O3 composites with x=2.0−3.6 and yFeAl−0.6TiC−Al2O3 composites with y=1.8−2.75 was studied.The increase of FeAl causes a decrease in the reaction exothermicity,thus resulting in the existence of flammability limits of x=3.6 and y=2.75 for the SHS reactions.Based on combustion wave kinetics,the activation energies of Ea=97.1 and 101.1 kJ/mol are deduced for the metallothermic SHS reactions.XRD analyses confirm in situ formation of FeAl/TiB2/Al2O3 and FeAl/TiC/Al2O3 composites.SEM micrographs exhibit that FeAl is formed with a dense polycrystalline structure,and the ceramic phases,TiB2,TiC,and Al2O3,are micro-sized discrete particles.The synthesized FeAl−TiB2−Al2O3 and FeAl−TiC−Al2O3 composites exhibit the hardness ranging from 12.8 to 16.6 GPa and fracture toughness from 7.93 to 9.84 MPa·m1/2.
基金supported by the National Natural Science Foundation of China(21174158,21274162,21474127)Shanghai Scientific and Technological Innovation Project(12JC1410500,13ZR1464800,14QA1404500,14520720100)the State Key Laboratory of Molecular Engineering of Polymers(K2015-02)
文摘In recent years, with the rapid development of polymer science, the application of classical named reactions has transferred from small-molecule compounds to polymers. The versatility of named reactions in terms of monomer selection, solvent environment, reaction temperature, and post-modification permits the synthesis of sophisticated macromolecular structures under conditions where other reaction processes will not operate. In this review, we divided the named reactions employed in polymer-chain synthesis into three types: transition metal-catalyzed cross-coupling reactions, metal-free cross-coupling reactions, and multi-components reactions. Thus, we focused our discussion on the progress in the utilization of these named reactions in polymer synthesis.
