In multisignature schemes signers can sign either in a linear order or not in any specified order, but neither of them is adequate in some scenarios where require mixture using of orderless and ordered multisignature....In multisignature schemes signers can sign either in a linear order or not in any specified order, but neither of them is adequate in some scenarios where require mixture using of orderless and ordered multisignature. Most order-specified multisignatures specified the orders as linear ones. In this paper, we proposed an order-specified multisignature scheme based on DSA secure against active insider attack. To our knowledge, it is the first order-specified multisignature scheme based on DSA signature scheme, in which signers can sign in flexible order represented by series-parallel graphs. In the multisignature scheme verification to both signers and signing order are available. The security of the scheme is proved by reduce to an identification scheme that is proved have some concrete security. The running time of verifying a signature is comparable to previous schemes while the running time of multisignature generation and the space needed is less than those schemes.展开更多
The processing speed of the communication between nodes in a parallel processor has become the major bottleneck of the processor's performance.RDMA(Remote Direct Memory Access) technology has drawn more attention ...The processing speed of the communication between nodes in a parallel processor has become the major bottleneck of the processor's performance.RDMA(Remote Direct Memory Access) technology has drawn more attention recently due to its capability of transferring a larger amount of data, higher speed and reliability.4DSP(4 Digital Signal Processing) module comprised of Tiger-SHARC201 chip is connected by LVDS(Low Voltage Differential Signal) circuits.This paper proposes a general and reconfigurable RDMA platform and its corresponding communication protocol with all the routes linked based on the zero copy.The protocol transfers message of DSP by interrupting of DMA and is applied on massive remote image impression, which reduces memory needs and working burden of CPU.The experiment results show this platform is efficient, flexible, and expandable of being integrated to a larger scale in the next development stages.展开更多
Stresses, particularly those at geometric discontinuities, can influence structural integrity of engineering components. Motivated by the prevalence of cutouts in components, the objective of this paper is to demonstr...Stresses, particularly those at geometric discontinuities, can influence structural integrity of engineering components. Motivated by the prevalence of cutouts in components, the objective of this paper is to demonstrate ability to stress analyze finite, circularly-perforated orthotropic composites whose external loading may be unknown. Recognizing difficulties in obtaining purely theoretical or numerical solutions, the paper presents a hybrid means of stress analyzing such structures. Individual stresses, including those on the edge of the hole, are obtained in a loaded finite graphite/epoxy composite tensile plate containing a round hole by processing measured values of a single displacement field with an Airy stress function in complex variables. Displacements are recorded by digital image correlation. Traction-free conditions are satisfied analytically at the edge of the hole using conformal mapping and analytic continuation. Stresses satisfy equilibrium and strains satisfy compatibility. Significant features of the technique include its wide applicability, it smooths the measured information, does not require knowing the applied loading, and the rigorous mechanics foundation by which strains are determined from measured displacements.展开更多
An intelligent vehicle control system is designed and embedded in a Digital Signal Processing （DSP） platform （eZdspTM F2812）. A golf cart is used as an installation platform for the overall system, including steer...An intelligent vehicle control system is designed and embedded in a Digital Signal Processing （DSP） platform （eZdspTM F2812）. A golf cart is used as an installation platform for the overall system, including steering wheel Alternating Current （AC） serve motor, brake actuator, throttle driving circuit and sensors. Digital image processing technology is also used to enable the autonomous driving system to achieve multi-mode lane-keeping, lane-change and obstacle-avoidance. The overall system is tested and evaluated on a university campus.展开更多
Challenges still remain in carrying out assembly modeling efficiently in virtual assembly （VA） fields. One of the root causes is the apparent weakness in effective description of assembly knowledge and information. ...Challenges still remain in carrying out assembly modeling efficiently in virtual assembly （VA） fields. One of the root causes is the apparent weakness in effective description of assembly knowledge and information. The assembly modeling, disassembly modeling, assembly interference inspection, assembly sequence planning and optimization, and assembly simulation display for key techniques is studied theoretically in this paper. An example of product assembly modeling is provided to illustrate the effectiveness of the proposed approach. On the basis of re- search, using assembly simulation techniques and multimedia techniques to finish structure design in linkage design of a large size wind-drive generator. The application of the modeling method has shortened the lead time dramatically.展开更多
The present paper deals with the development of a modular, flexible and structured block to block approach for the study of regulators by implementing the different blocks on a DSP （digital signal processor）. The pr...The present paper deals with the development of a modular, flexible and structured block to block approach for the study of regulators by implementing the different blocks on a DSP （digital signal processor）. The proposed low-cost approach has been applied and validated by the implementation of an industrial regulator in a real time hardware-in-the-loop simulation of a mixed islanded power network including precise models of the hydraulic system. The studied network is constituted of three different types of electrical power generation systems and a consumer.展开更多
基金Supported by the National Natural Science Foundation ofChina (60403027)
文摘In multisignature schemes signers can sign either in a linear order or not in any specified order, but neither of them is adequate in some scenarios where require mixture using of orderless and ordered multisignature. Most order-specified multisignatures specified the orders as linear ones. In this paper, we proposed an order-specified multisignature scheme based on DSA secure against active insider attack. To our knowledge, it is the first order-specified multisignature scheme based on DSA signature scheme, in which signers can sign in flexible order represented by series-parallel graphs. In the multisignature scheme verification to both signers and signing order are available. The security of the scheme is proved by reduce to an identification scheme that is proved have some concrete security. The running time of verifying a signature is comparable to previous schemes while the running time of multisignature generation and the space needed is less than those schemes.
基金Supported by the NSFC (National Natural Science Foundation of China)the 863 Program (2006AA1332)ERIPKU, the Program for New Century Excellent Talents in University.
文摘The processing speed of the communication between nodes in a parallel processor has become the major bottleneck of the processor's performance.RDMA(Remote Direct Memory Access) technology has drawn more attention recently due to its capability of transferring a larger amount of data, higher speed and reliability.4DSP(4 Digital Signal Processing) module comprised of Tiger-SHARC201 chip is connected by LVDS(Low Voltage Differential Signal) circuits.This paper proposes a general and reconfigurable RDMA platform and its corresponding communication protocol with all the routes linked based on the zero copy.The protocol transfers message of DSP by interrupting of DMA and is applied on massive remote image impression, which reduces memory needs and working burden of CPU.The experiment results show this platform is efficient, flexible, and expandable of being integrated to a larger scale in the next development stages.
文摘Stresses, particularly those at geometric discontinuities, can influence structural integrity of engineering components. Motivated by the prevalence of cutouts in components, the objective of this paper is to demonstrate ability to stress analyze finite, circularly-perforated orthotropic composites whose external loading may be unknown. Recognizing difficulties in obtaining purely theoretical or numerical solutions, the paper presents a hybrid means of stress analyzing such structures. Individual stresses, including those on the edge of the hole, are obtained in a loaded finite graphite/epoxy composite tensile plate containing a round hole by processing measured values of a single displacement field with an Airy stress function in complex variables. Displacements are recorded by digital image correlation. Traction-free conditions are satisfied analytically at the edge of the hole using conformal mapping and analytic continuation. Stresses satisfy equilibrium and strains satisfy compatibility. Significant features of the technique include its wide applicability, it smooths the measured information, does not require knowing the applied loading, and the rigorous mechanics foundation by which strains are determined from measured displacements.
文摘An intelligent vehicle control system is designed and embedded in a Digital Signal Processing （DSP） platform （eZdspTM F2812）. A golf cart is used as an installation platform for the overall system, including steering wheel Alternating Current （AC） serve motor, brake actuator, throttle driving circuit and sensors. Digital image processing technology is also used to enable the autonomous driving system to achieve multi-mode lane-keeping, lane-change and obstacle-avoidance. The overall system is tested and evaluated on a university campus.
基金supported by the Foundation of Jiangsu Province for Talented Personnel and the Self-determined Research Program of Jiangnan University
文摘Challenges still remain in carrying out assembly modeling efficiently in virtual assembly （VA） fields. One of the root causes is the apparent weakness in effective description of assembly knowledge and information. The assembly modeling, disassembly modeling, assembly interference inspection, assembly sequence planning and optimization, and assembly simulation display for key techniques is studied theoretically in this paper. An example of product assembly modeling is provided to illustrate the effectiveness of the proposed approach. On the basis of re- search, using assembly simulation techniques and multimedia techniques to finish structure design in linkage design of a large size wind-drive generator. The application of the modeling method has shortened the lead time dramatically.
文摘The present paper deals with the development of a modular, flexible and structured block to block approach for the study of regulators by implementing the different blocks on a DSP （digital signal processor）. The proposed low-cost approach has been applied and validated by the implementation of an industrial regulator in a real time hardware-in-the-loop simulation of a mixed islanded power network including precise models of the hydraulic system. The studied network is constituted of three different types of electrical power generation systems and a consumer.
