期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
The geomorphological features and continuity of the Kyushu-Palau Ridge (KPR) 被引量:7
1
作者 TANG Yong LI Mingbi +1 位作者 LI Jiabiao WU Zhaocai 《Acta Oceanologica Sinica》 SCIE CAS CSCD 2011年第5期114-124,共11页
The Philippine Basin,surrounded by a series of oceanic trenches,is an independent deep ocean basin in the West Pacific Ocean.Its middle part is divided into three marginal sea sub-basins by the Kyushu-Palau and West M... The Philippine Basin,surrounded by a series of oceanic trenches,is an independent deep ocean basin in the West Pacific Ocean.Its middle part is divided into three marginal sea sub-basins by the Kyushu-Palau and West Mariana Ridges,namely,the West Philippine Basin,the Shikoku and Parece Vela Basins and the Mariana Trough.This paper,through the analysis of the geomorphologic features and gravity and magnetic characteristics of the basin and identification of striped magnetic anomalies,suggests that the entire Philippine Basin developed magnetic lineation of oceanic nature,and therefore,the entire basin is of the nature of oceanic crust.The basin has developed a series of special geomorphic units with different shapes.The KPR runs through the entire Philippine Basin.From the view of geomorphologic features,the KPR is a discontinuous seamount chain (chain-shaped seamounts) and subduction beneath the Japanese Island arc at the Nankai Trough which is the natural boundary between the basin and the Japanese Island arc.At the positions of 25 N,24 N,23 N and 18 N,obvious discontinuity is shown,which belongs to natural topographic discontinuity.Therefore,the KPR is topographically discontinuous. 展开更多
关键词 Kyushu-Palau Ridge (kpr) Philippine Basin Seamount chain (chain-shaped seamounts)
下载PDF
一次层状云弱降水过程的机载Ka波段云雷达探测特征分析
2
作者 孙国德 蔡兆鑫 +2 位作者 张佃国 王烁 易田 《海洋气象学报》 2024年第3期107-114,共8页
利用2019年11月17日一次层状云系弱降水过程中获取的机载Ka波段云雷达(Ka-band precipitation cloud radar,KPR)和云粒子测量系统(droplet measurement technologies,DMT)资料,将利用云粒子谱正演得到的雷达反射率因子(Z_(c))与KPR探测... 利用2019年11月17日一次层状云系弱降水过程中获取的机载Ka波段云雷达(Ka-band precipitation cloud radar,KPR)和云粒子测量系统(droplet measurement technologies,DMT)资料,将利用云粒子谱正演得到的雷达反射率因子(Z_(c))与KPR探测值(Z_(m))进行对比,并对影响两者偏差的成因进行探讨分析。结果发现:(1)在层状云内部,Z_(c)与Z_(m)有很好的一致性,两者之间的偏差和均方根偏差分别为4.1 dBZ和4.3 dBZ。(2)在KPR径向速度变化和速度谱宽较大的区域,或在云层比较薄的区域,Z_(c)与Z_(m)之间的偏差和均方根偏差变大,但在雷达反射率因子的变化趋势上有较好的一致性。(3)云粒子数浓度(N_(c))、云粒子有效直径和云中液态水含量的变化均对Z_(c)与Z_(m)之间的偏差有一定的影响,但偏差总体控制在±10 dBZ范围内。随着N_(c)的增大,两者之间的偏差变小,当N_(c)>200 cm^(-3)时,偏差大于10 dBZ的时次极少。当有效直径在50~230μm、液态水含量在0.15~0.50 g·m^(-3)范围内时,Z_(c)<Z_(m);当有效直径大于230μm、液态水含量大于0.50 g·m^(-3)时,Z_(c)>Z_(m)。 展开更多
关键词 Ka波段云雷达(kpr) 飞机观测 云微物理结构
下载PDF
涂装车间废气浓缩沸石转轮焚烧系统的优化措施
3
作者 王筱湛 寇锁 《现代涂料与涂装》 CAS 2024年第8期50-53,共4页
通过对环保在线监测得到的数据进行详细分析,结合KP R系统及焚烧炉的工作原理,合理推导出VOC超标的原因,并进行了系列试验。讨论了如何提高沸石转轮以及焚烧系统的处理效率并稳定排放,为企业环保工作的实施提供了技术参考。
关键词 涂装车间 废气浓缩沸石转轮焚烧系统 在线监测
下载PDF
The formation and tectonic evolution of Philippine Sea Plate and KPR 被引量:8
4
作者 FANG Yinxia LI Jiabiao LI Mingbi DING Weiwei ZHANG Jie 《Acta Oceanologica Sinica》 SCIE CAS CSCD 2011年第4期75-88,共14页
The Philippine Sea Plate has an extremely special tectonic background. As an oceanic plate,it is almost entirely surrounded by subduction zones with complex internal tectonic features. On the basis of enormous publish... The Philippine Sea Plate has an extremely special tectonic background. As an oceanic plate,it is almost entirely surrounded by subduction zones with complex internal tectonic features. On the basis of enormous published literature,this paper offers a comprehensive overview of the tectonic and evolution history of the Philippine Basin and the Kyushu-Palau Ridge(KPR) in the Philippine Sea Plate,and discusses the geological features of KPR. Referring to relevant definitions of various "ridges" stipulated in United Nations Convention on the Law of the Sea,so the KPR is believed to be a remnant arc formed during the opening of the Parece Vela and Shikoku Basins in the Philippine Sea Plate. It is a submarine ridge on oceanic plate rather than a submarine elevation. And thus,it is not a natural component of the Japan continental margin. 展开更多
关键词 Philippine Sea Plate West Philippine Basin kpr submarine ridge
下载PDF
基于机载Ka波段云雷达和粒子测量系统同步观测的积层混合云对流泡特征 被引量:14
5
作者 张佃国 王烁 +2 位作者 郭学良 王洪 樊明月 《大气科学》 CSCD 北大核心 2020年第5期1023-1038,共16页
利用机载Ka波段云雷达(Airborne Ka-Band Precipitation Cloud Radar, KPR)和粒子测量系统(Droplet Measurement Technologies, DMT),分析了2018年4月22日黄淮气旋背景系统下积层混合云中对流泡的动力和微物理特征。首先,对Ka波段云雷... 利用机载Ka波段云雷达(Airborne Ka-Band Precipitation Cloud Radar, KPR)和粒子测量系统(Droplet Measurement Technologies, DMT),分析了2018年4月22日黄淮气旋背景系统下积层混合云中对流泡的动力和微物理特征。首先,对Ka波段云雷达观测的山东地区春季36个对流泡样本按照回波强度、水平尺度、回波顶高三个参量进行统计,结果表明平均回波强度为20~30 d BZ的对流泡占69%。对流泡水平尺度为15~30 km,占61%。对流泡最大回波顶高集中在6~8 km,比周边层云高2~4 km。之后,对4月22日积层混合云中的对流泡个例微物理参数进行统计,结果表明对流泡内部以上升气流为主,最大上升气流速度达到1.35 m s^-1,平均上升气流速度为0.22 m s^-1;对流泡内过冷水含量比较高,最大含水量为0.34 g m^-3,平均含水量为0.15 g m^-3。对流泡内冰晶数浓度是泡外的5.5倍,平均直径是泡外的1.7倍。结合云粒子图像探头,发现对流泡前沿和尾部冰粒子以柱状和辐枝状为主,而对流泡核心区域冰粒子以聚合体形式存在。冰粒子通过凇附过程和碰并过程增长,过冷水含量不足时冰粒子的凇附增长形成柱状粒子,含量充足时可迅速凇附成霰粒子。对流泡内降水形成的微物理机制不完全相同,主要依赖过冷水含量。当云中有充足的过冷水分布时,高层冰晶通过凇附增长形成霰粒子,通过融化层后形成降水;当云中缺少过冷水时,降水的形成主要通过水汽凝华过程形成冰雪晶,然后雪晶通过聚合过程实现增长。 展开更多
关键词 对流泡 Ka波段云雷达(kpr) 粒子测量系统(DMT) 降水机制
下载PDF
Geological comparative studies of Japan Arc System and Kyushu-Palau Arc 被引量:11
6
作者 YAN Quanshu SHI Xuefa 《Acta Oceanologica Sinica》 SCIE CAS CSCD 2011年第4期107-121,共15页
Based on the published data of structure geology,geochronology,petrology and isotope geochemistry,the authors of this paper have conducted studies on the tectonic evolution history of Japan arc system and Kyushu-Palau... Based on the published data of structure geology,geochronology,petrology and isotope geochemistry,the authors of this paper have conducted studies on the tectonic evolution history of Japan arc system and Kyushu-Palau ridge(KPR) . The studies show that the initial Japan arc system was resulted from the subduction of ancient Pacific plate beneath Eurasian Plate in Permian. It was part of an Andean-type continental volcanic arc which occurred in the offshore in the east of Asian during late Mesozoic era. The formation of tertiary back-arc basin(Japan Sea) resulted in the fundamental tectonic framework of the present arc system. Since Quaternary the system has been lying at E-W compression tectonic setting due to the eastward subduction of Amur Plate. It is expected that Japan arc system will be juxtaposed with Asian continent,which is similar to the present Taiwan arc system. The origin of Philippine Sea Plate(PSP) is still in debate. Some studies argued that it is a trapped oceanic crust segment,while the others insisted that it is a back-arc basin accompanied with ancient IBM arc. However,it is all agreed that the tectonic evolution of PSP started since 50 Ma,i.e.,PSP has drifted from the site around equator at 50 Ma to the present site,and the subduction of PSP along Nankai trough-Ryukyu Trench beneath the Japan arc system during 6–2 Ma led to the formation of the present Ryukyu arc system. Of the PSP,the KPR has been found with the oldest rocks formed at 38 Ma. Combining with its geochemical characteristics of oceanic arc tholeiite,it is suggested that KPR is an intraoceanic volcanic arc,more specifically,a relic arc(i.e.,rear arc of the ancient IBM) after rifting of ancient IBM. In addition,Amami-Daito province is of arc tectonic affinity,but has been affected by mantle plume. Therefore,based on their respective tectonic evolution history and geochemical characteristics of rock samples,it is inferred that there is no genetic relationship between Japan arc system and KPR. It is noted that rocks reflecting continental crust basement feature have been collected on the northern tip of KPR,which may be related to the process of KPR accreting on Japan arc,but the arc-continent accretion process are still at initial stage of modern continental crust accretion model. However,due to the scarcity of data of the northern tip of KPR,crustal structure of this location and its adjacent Nankai trough need to be further constrained by geophysical studies in the future. 展开更多
关键词 Japan arc system Kyushu-Palau ridge (kpr) Philippine sea plate (PSP) Tectonic evolution GEOCHRONOLOGY geochemistry
下载PDF
课件知识点操作的形式化研究 被引量:1
7
作者 肖锟 李晓建 陈世鸿 《计算机科学》 CSCD 北大核心 2008年第1期181-183,共3页
知识点关系是连接知识点的纽带。教学系统智能性体现的一个重要方面是能够根据知识点之间的关系组织教学内容。受学生学习知识的能力和课时影响等原因,知识点之间的关系会经常发生动态变化。本文通过分析知识点之间的基本关系,形式化知... 知识点关系是连接知识点的纽带。教学系统智能性体现的一个重要方面是能够根据知识点之间的关系组织教学内容。受学生学习知识的能力和课时影响等原因,知识点之间的关系会经常发生动态变化。本文通过分析知识点之间的基本关系,形式化知识点的操作语义,通过操作语义检查,能保知识点动态变化情况下知识点间的关系依旧能保持一致性,为课件的动态生成提供理论依据。 展开更多
关键词 知识点关系 形式化 课件
下载PDF
汽车涂装车间VOC处理设备废气浓缩沸石转轮焚烧系统应用 被引量:4
8
作者 刘杰 《现代涂料与涂装》 CAS 2021年第1期59-62,共4页
为满足北京市环保要求,针对喷漆室废气大风量、低浓度的特点,对罩光喷漆室排放的废气出具了合理的处理方案,并在实际项目中成功运用,完全满足地方排放标准。该汽车涂装车间安装的废气浓缩转轮焚烧系统处理了罩光喷漆房排出的含VOC气体,... 为满足北京市环保要求,针对喷漆室废气大风量、低浓度的特点,对罩光喷漆室排放的废气出具了合理的处理方案,并在实际项目中成功运用,完全满足地方排放标准。该汽车涂装车间安装的废气浓缩转轮焚烧系统处理了罩光喷漆房排出的含VOC气体,通过详细阐述涂装车间废气浓缩沸石转轮焚烧系统的设计背景、设备工作原理、设计方案、安装调试、设备处理效果及完成状态等技术细节,对汽车行业VOC气体处理设备上马提供了一个技术参考,也为企业环保工作的实施提供了一个成功案例。 展开更多
关键词 喷漆室 废气 浓缩转轮焚烧系统 VOC气体
下载PDF
CPR1000项目远程停堆站系统设计改进研究 被引量:1
9
作者 程波 栾语 +2 位作者 梅世柏 张刚 邹杰 《核科学与工程》 CSCD 北大核心 2012年第S2期41-46,共6页
远程停堆站系统(KPR)提供足够的监测信号和操作设备,以便在主控室不可用时,使反应堆停堆并达到安全停堆状态,核电厂的主要参数能够得到监测。本文重点研究了基于DCS整体结构变化和经验反馈,远程停堆站系统设计的改进,为后续项目的远程... 远程停堆站系统(KPR)提供足够的监测信号和操作设备,以便在主控室不可用时,使反应堆停堆并达到安全停堆状态,核电厂的主要参数能够得到监测。本文重点研究了基于DCS整体结构变化和经验反馈,远程停堆站系统设计的改进,为后续项目的远程停堆站系统设计提供了参考。 展开更多
关键词 远程停堆站 主控室 kpr
下载PDF
喷漆废气处理技术方法概述及选用对比 被引量:1
10
作者 刘煜 《现代涂料与涂装》 CAS 2022年第12期47-50,共4页
指出了喷漆废气是环境空气污染的重要因素,总结了目前喷漆废气处理中漆雾净化和有机废气净化的技术手段,分别简述总结喷漆废气净化技术的工艺原理、优缺点及研究内容和使用情况,并提出企业实际在产线新建或改造中选用的注意事项。
关键词 喷漆废气 低温等离子技术 光化学催化 吸附 沸石转轮
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部