Finite element model updating and validating of Runyang Suspension Bridge based on SHMS

Based on the finite element （FE） program ANSYS, a three-dimensional model for the Runyang Suspension Bridge （RSB） is established. The structural natural frequency, vibration mode, stress and displacement response under various load cases are given. A new method of FE model updating is presented based on the physical meaning of sensitivity and the penalty function concept. In this method, the structural model is updated by modifying the parameters of design, and validated by structural natural vibration characteristics, stress response as well as displacement response. The design parameters used for updating are bounded according to measured static response and engineering judgment. The FE model of RSB is updated and validated by the measurements coming from the structural health monitoring system （SHMS）, and the FE baseline model reflecting the current state of RSB is achieved. Both the dynamic and static results show that the method is effective in updating the FE model of long span suspension bridges. The results obtained provide an important research basis for damage alarming and health monitoring of the RSB.

Digital simulation of 3D turbulence wind field of Sutong Bridge based on measured wind spectra

Time domain analysis is an essential implement to study the buffeting behavior of long-span bridges for it can consider the non-linear effect which is significant in long-span bridges. The prerequisite of time domain analysis is the accurate description of 3D turbulence winds. In this paper, some hypotheses for simplifying the 3D turbulence simulation of long-span cable-stayed bridges are conducted, considering the structural characteristics. The turbulence wind which is a 3D multivariate stochastic vector process is converted into four independent 1D univariate stochastic processes. Based on recorded wind data from structural health monitoring system (SHMS) of the Sutong Bridge, China, the measured spectra expressions are then presented using the nonlinear least-squares fitting method. Turbulence winds at the Sutong Bridge site are simulated based on the spectral representation method and the Fast Fourier transform (FFT) technique, and the relevant results derived from target spectra including measured spectra and recommended spectra are compared. The reliability and accuracy of the presented turbulence simulation method are validated through comparisons between simulated and target spectra (measured and recommended spectra). The obtained turbulence si-mulations can not only serve further analysis of the buffeting behavior of the Sutong Bridge, but references for structural anti-wind design in adjacent regions.

Measurement Study on Wind Characteristics of Typhoon Kalmaegi on the Sutong Bridge

The Sutong Bridge, a cable-stayed located in the southeast coastal area of China, is vulnerable to the Pacific typhoons. From the data measured by two 3D ultrasonic anemometers at the height of 76 m and 306 m, the wind characteristics （including 10-minute mean wind speed and direction, turbulence intensity and gust factor, power spectral density and integral scale of turbulence） of Typhoon Kalmaegi are analyzed The comparison of 10-minute mean wind velocity from the two anemometers vali- dates the reliability of wind data. The turbulence intensities （Iu, Iv, and Iw） show the decreasing trend as the mean wind speed increases. The mean value of Iv/Iu is 0.94, while that of Iw/Iu is 0.90. Discrepancy exists between field-measured power spectra and code-suggested spectra. Those results can enlarge the wind database of the southeast coastal area of China, and provide references for wind resistance evaluation of the bridge.