期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Sensitivity investigation of 100-MeV proton irradiation to SiGe HBT single event effect
1
作者 冯亚辉 郭红霞 +7 位作者 刘益维 欧阳晓平 张晋新 马武英 张凤祁 白如雪 马晓华 郝跃 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第1期554-562,共9页
The single event effect(SEE) sensitivity of silicon–germanium heterojunction bipolar transistor(Si Ge HBT) irradiated by 100-Me V proton is investigated. The simulation results indicate that the most sensitive positi... The single event effect(SEE) sensitivity of silicon–germanium heterojunction bipolar transistor(Si Ge HBT) irradiated by 100-Me V proton is investigated. The simulation results indicate that the most sensitive position of the Si Ge HBT device is the emitter center, where the protons pass through the larger collector-substrate(CS) junction. Furthermore, in this work the experimental studies are also carried out by using 100-Me V proton. In order to consider the influence of temperature on SEE, both simulation and experiment are conducted at a temperature of 93 K. At a cryogenic temperature, the carrier mobility increases, which leads to higher transient current peaks, but the duration of the current decreases significantly.Notably, at the same proton flux, there is only one single event transient(SET) that occurs at 93 K. Thus, the radiation hard ability of the device increases at cryogenic temperatures. The simulation results are found to be qualitatively consistent with the experimental results of 100-Me V protons. To further evaluate the tolerance of the device, the influence of proton on Si Ge HBT after gamma-ray(^(60)Coγ) irradiation is investigated. As a result, as the cumulative dose increases, the introduction of traps results in a significant reduction in both the peak value and duration of the transient currents. 展开更多
关键词 silicon–germanium heterojunction bipolar transistor(Si Ge HBT) 100-me V proton technology computer-aided design(TCAD) single event effect(SEE)
下载PDF
插入式低温冷板模拟抽气系统设计和实验 被引量:3
2
作者 张素平 张天爵 +3 位作者 潘高峰 邢建升 秦久昌 李振国 《真空与低温》 2015年第3期177-180,共4页
本文根据北京放射性核素装置(BRIF)-100 Me V紧凑型回旋加速器主真空特点,设计了一套插入式低温冷板模拟抽气系统。该插入式低温冷板抽气系统的设计抽速为15 000 l/s,包括两块冷板片,挡板,半开半闭屏蔽罩,及两套制冷机,制冷机一级功率83... 本文根据北京放射性核素装置(BRIF)-100 Me V紧凑型回旋加速器主真空特点,设计了一套插入式低温冷板模拟抽气系统。该插入式低温冷板抽气系统的设计抽速为15 000 l/s,包括两块冷板片,挡板,半开半闭屏蔽罩,及两套制冷机,制冷机一级功率83W@80K,二级功率7.5W@20K。抽速和极限压力测试采用定压法,测试了不带活性炭和带活性炭不同情况下的抽速及对不同气体的抽速。不带活性炭平均抽速14 500 l/s;带有活性炭平均抽速为16 000 l/s,冷板对氮气和氢气的平均抽速分别为16 000 l/s和12 000 l/s。本文还对极限压强、容量、降温时间等低温冷板的性能参数进行了测试,测试结果表明该套模拟抽气系统极限压力可达5.8E-6Pa,抽速16 000 l/s,可在此基础上进行100 Me V回旋加速器主真空低温抽气系统的设计。 展开更多
关键词 北京放射性核素装置 真空 100MeV回旋加速器 插入式低温冷板
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部