Research on 3D Laser Scanning Reconstruction of Ancient Buildings Combined with BIM Technology

After more than 30 years of scientific and social development, surveying and mapping technology by leaps and bounds, engineering surveying technology has undergone tremendous changes. In the process of protecting ancient buildings, it is necessary to obtain the precise dimensions of architectural details. In this study, the path of 3D laser scanning combined with BIM technology is explored. Taking the observation and protection of the ancestral hall of the Liu family as an example, this study aims to draw drawings that reflect the relevant information about the ancient buildings, the accurate three-dimensional model of ancient buildings is established with BIM technology, which provides new methods and ideas for the research and protection of ancient buildings. .

Large-scale deformation monitoring in mining area by D-InSAR and 3D laser scanning technology integration

Large-scale deformation can not be detected by traditional D-InSAR technique because of the limit of its detectable deformation gradient,we propose a method that combines SAR data with point cloud data obtained by 3D laser scanning to improve the gradient of deformation detection.The proposed method takes advantage of high-density of 3D laser scanning point cloud data and its high precision of point positioning after 3D modeling.The specifc process can be described as follows:frst,large-scale deformation points in the interferogram are masked out based on interferometric coherence;second,the interferogram with holes is unwrapped to obtain a deformation map with holes,and last,the holes in the deformation map are flled with point cloud data using inverse distance weighting algorithm,which will achieve seamless connection of monitoring region.We took the embankment dam above working face of a certain mining area in Shandong province as an example to study large-scale deformation in mining area using the proposed method.The results show that the maximum absolute error is 64 mm,relative error of maximum subsidence value is 4.95%,and they are consistent with leveling data of ground observation stations,which confrms the feasibility of this method.The method we presented provides new ways and means for achieving large-scale deformation monitoring by D-InSAR in mining area.

Research on wind erosion processes and controlling factors based on wind tunnel test and 3D laser scanning technology

The study of wind erosion processes is of great importance to the prevention and control of soil wind erosion.In this study,three structurally intact soil samples were collected from the steppe of Inner Mongolia Autonomous Region,China and placed in a wind tunnel where they were subjected to six different wind speeds(10,15,17,20,25,and 30 m/s)to simulate wind erosion in the wind tunnel.After each test,the soil surfaces were scanned by a 3D laser scanner to create a high-resolution Digital Elevation Model(DEM),and the changes in wind erosion mass and microtopography were quantified.Based on this,we performed further analysis of wind erosion-controlling factors.The study results showed that the average measurement error between the 3D laser scanning method and weighing method was 6.23%for the three undisturbed soil samples.With increasing wind speed,the microtopography on the undisturbed soil surface first became smooth,and then fine stripes and pits gradually developed.In the initial stage of wind erosion processes,the ability of the soil to resist wind erosion was mainly affected by the soil hardness.In the late stage of wind erosion processes,the degree of soil erosion was mainly affected by soil organic matter and CaCO_(3)content.The results of this study are expected to provide a theoretical basis for soil wind erosion control and promote the application of 3D laser scanners in wind erosion monitoring.

The Research Application of 3D Laser Scanning Technology in the Deformation Detection of Large Cylindrical Oil Tank

In order to ensure the safety in using a large cylindrical storage tank,it is necessary to regularly detect its defonnatioii.The traditional total station method has high accuracy in determining the deformation,however,it has a low measxirement efficiency.Long-term observation means,there are more risks in the petrochemical plant,therefore,this paper proposes the usage of the 3D laser scanner,replacing the traditional total station to determine the defbnnation of a large cylindrical storage tank.The Matlab program,is compiled to calculate the point cloud data,while the tank deformation is analyzed from two different points which are,the local concave convex degree and the ovality degree.It is concluded that,the difference between the data obtained by 3D laser scanning,and total station is within the range of oil tank deformation limit,therefore,3D laser scanner can be used for oil tank deformation detection.

Structural plane recognition from three-dimensional laser scanning points using an improved region-growing algorithm based on the robust randomized Hough transform

The staggered distribution of joints and fissures in space constitutes the weak part of any rock mass.The identification of rock mass structural planes and the extraction of characteristic parameters are the basis of rock-mass integrity evaluation,which is very important for analysis of slope stability.The laser scanning technique can be used to acquire the coordinate information pertaining to each point of the structural plane,but large amount of point cloud data,uneven density distribution,and noise point interference make the identification efficiency and accuracy of different types of structural planes limited by point cloud data analysis technology.A new point cloud identification and segmentation algorithm for rock mass structural surfaces is proposed.Based on the distribution states of the original point cloud in different neighborhoods in space,the point clouds are characterized by multi-dimensional eigenvalues and calculated by the robust randomized Hough transform(RRHT).The normal vector difference and the final eigenvalue are proposed for characteristic distinction,and the identification of rock mass structural surfaces is completed through regional growth,which strengthens the difference expression of point clouds.In addition,nearest Voxel downsampling is also introduced in the RRHT calculation,which further reduces the number of sources of neighborhood noises,thereby improving the accuracy and stability of the calculation.The advantages of the method have been verified by laboratory models.The results showed that the proposed method can better achieve the segmentation and statistics of structural planes with interfaces and sharp boundaries.The method works well in the identification of joints,fissures,and other structural planes on Mangshezhai slope in the Three Gorges Reservoir area,China.It can provide a stable and effective technique for the identification and segmentation of rock mass structural planes,which is beneficial in engineering practice.

Indoor Space Modeling and Parametric Component Construction Based on 3D Laser Point Cloud Data

In order to enhance modeling efficiency and accuracy,we utilized 3D laser point cloud data for indoor space modeling.Point cloud data was obtained with a 3D laser scanner and optimized with Autodesk Recap and Revit software to extract geometric information about the indoor environment.Furthermore,we proposed a method for constructing indoor elements based on parametric components.The research outcomes of this paper will offer new methods and tools for indoor space modeling and design.The approach of indoor space modeling based on 3D laser point cloud data and parametric component construction can enhance modeling efficiency and accuracy,providing architects,interior designers,and decorators with a better working platform and design reference.

Application of Three-Dimensional Laser Scanning and Surveying in Geological Investigation of High Rock Slope

The appearance of 3D laser scanning technology is one of the most important technology revolutions in surveying and mapping field. It can be widely used in many interrelated fields, such as engineering constructions and 3D measurements, owing to its prominent characteristics of the high efficiency and high precision. At present its application is still in the initial state, and it is quite rarely used in China, especially in geotechnical engineering and geological engineering fields. Starting with a general introduction of 3D laser scanning technology, this article studies how to apply the technology to high rock slope investigations. By way of a case study, principles and methods of quick slope documentation and occurrence measurement of discontinuities are discussed and analyzed. Analysis results show that the application of 3D laser scanning technology to geotechnical and geological engineering has a great prospect and value.

A Novel Airborne 3D Laser Point Cloud Hole Repair Algorithm Considering Topographic Features

Hole repair processing is an important part of point cloud data processing in airborne 3-dimensional(3D)laser scanning technology.Due to the fragmentation and irregularity of the surface morphology,when applying the 3D laser scanning technology to mountain mapping,the conventional mathematical cloud-based point cloud hole repair method is not ideal in practical applications.In order to solve this problem,we propose to repair the valley and ridge line first,and then repair the point cloud hole.The main technical steps of the method include the following points:First,the valley and ridge feature lines are extracted by the GIS slope analysis method;Then,the valley and ridge line missing from the hole are repaired by the mathematical interpolation method,and the repaired results are edited and inserted to the original point cloud;Finally,the traditional repair method is used to repair the point cloud hole whose valley line and ridge line have been repaired.Three experiments were designed and implemented in the east bank of the Xiaobaini River to test the performance of the proposed method.The results showed that compared with the direct point cloud hole repair method in Geomagic Studio software,the average repair accuracy of the proposed method,in the 16 m buffer zone of valley line and ridge line,is increased from 56.31 cm to 31.49 cm.The repair performance is significantly improved.

Optimized air-ground data fusion method for mine slope modeling

Refined 3D modeling of mine slopes is pivotal for precise prediction of geological hazards.Aiming at the inadequacy of existing single modeling methods in comprehensively representing the overall and localized characteristics of mining slopes,this study introduces a new method that fuses model data from Unmanned aerial vehicles(UAV)tilt photogrammetry and 3D laser scanning through a data alignment algorithm based on control points.First,the mini batch K-Medoids algorithm is utilized to cluster the point cloud data from ground 3D laser scanning.Then,the elbow rule is applied to determine the optimal cluster number(K0),and the feature points are extracted.Next,the nearest neighbor point algorithm is employed to match the feature points obtained from UAV tilt photogrammetry,and the internal point coordinates are adjusted through the distanceweighted average to construct a 3D model.Finally,by integrating an engineering case study,the K0 value is determined to be 8,with a matching accuracy between the two model datasets ranging from 0.0669 to 1.0373 mm.Therefore,compared with the modeling method utilizing K-medoids clustering algorithm,the new modeling method significantly enhances the computational efficiency,the accuracy of selecting the optimal number of feature points in 3D laser scanning,and the precision of the 3D model derived from UAV tilt photogrammetry.This method provides a research foundation for constructing mine slope model.

Building Facade Point Clouds Segmentation Based on Optimal Dual-Scale Feature Descriptors

To address the current issues of inaccurate segmentation and the limited applicability of segmentation methods for building facades in point clouds, we propose a facade segmentation algorithm based on optimal dual-scale feature descriptors. First, we select the optimal dual-scale descriptors from a range of feature descriptors. Next, we segment the facade according to the threshold value of the chosen optimal dual-scale descriptors. Finally, we use RANSAC (Random Sample Consensus) to fit the segmented surface and optimize the fitting result. Experimental results show that, compared to commonly used facade segmentation algorithms, the proposed method yields more accurate segmentation results, providing a robust data foundation for subsequent 3D model reconstruction of buildings.

Analysis of the Mechanisms Underpinning Rainstorm-Induced Landslides

The present study considers the damage mechanisms and the rainfall infiltration process responsible for landslide phenomena which originate from accumulation slopes.Accordingly,a physical test model is developed for different slopes and different rainfall conditions.Moreover,a three-dimensional laser scanner and a camera are used to monitor the slope erosion and the landslide dynamic evolution.Using this approach,the time variation curves of volumetric water content,pore water pressure,soil pressure,slope deformation,and damage are determined.The results show that under similar conditions,similar trends of the pore water pressure are achieved for different slopes and rainfall intensities.

Reconstructing DEM using TLS point cloud data and NURBS surface

Underground coal mining inevitably results in land surface subsidence.Acquiring information on land surface subsidence is important in the detection of surface change.However,conventional data acquisition techniques cannot always retrieve information on whole subsidence area.This study focuses on the reconstruction of a digital elevation model（DEM） with terrestrial laser scanning（TLS） point cloud data.Firstly,the methodology of the DEM with terrestrial 3-dimensional laser scanning is introduced.Then,a DEM modeling approach that involves the application of curved non-uniform rational B-splines（NURBS） surface is put forward.Finally,the performance of the DEM modeling approach with different surface inverse methods is demonstrated.The results indicate that the DEM based on the point cloud data and curved NURBS surface can achieve satisfactory accuracy.In addition,the performance of the hyperbolic paraboloid appears to be better than that of the elliptic paraboloid.The reconstructed DEM is continuous and can easily be integrated into other programs.Such features are of great importance in monitoring dynamic ground surface subsidence.

Methods of configuration test and deformation analysis for large airship

In recent years, high-altitude aerostats have been increasingly developed in the direction of multi-functionality and large size. Due to the large size and the high flexibility, new challenges for large aerostats have appeared in the configuration test and the deformation analysis. The methods of the configuration test and the deformation analysis for large airship have been researched and discussed. A tested method of the configuration,named internal scanning, is established to quickly obtain the spatial information of all surfaces for the large airship by the three-dimensional(3D) laser scanning technology. By using the surface wrap method, the configuration parameters of the large airship are calculated. According to the test data of the configuration, the structural dimensions such as the distances between the characteristic sections are measured. The method of the deformation analysis for the airship contains the algorithm of nonuniform rational B-splines(NURBS) and the finite element(FE)method. The algorithm of NURBS is used to obtain the reconfiguration model of the large airship. The seams are considered and the seam areas are divided. The FE model of the middle part of the large airship is established. The distributions of the stress and the strain for the large airship are obtained by the FE method. The position of the larger deformation for the airship is found.

Establishment of a three-dimensional particle library for graded crushed stone based on a new aggregate morphology characterization method

The morphology of graded crushed stone(GCS)particles has an essential influence on the performance of aggregate mixtures.The impact of particle shape is a comprehensive effect that cannot be considered separately,leading to difficulties in establishing the relationship between the mixture properties and the aggregate morphology by using laboratory methods.The discrete element method(DEM)is an effective way widely adopted to reconstruct the morphology of particles and simulate performance tests of granular materials.However,selecting limited particles characterizing a real particle-assembly for simulation is still a challenge in current research due to the inherent rich variability of particle shapes.In this study,based on the acquisition of three-dimensional(3D)aggregate shapes by using laser scanning,ellipsoid index(EDI)translating the particle shape as a function of surface area,volume,and contour length is proposed to comprehensively evaluate aggregate morphology.Further,a particle library capable of characterizing aggregate morphology distribution is established based on the statistics of the corresponding morphological characteristics of particle samples.The model reliability is validated by carrying out a series of experimental and numerical penetration tests with nine different gradations.The established particle library can be used to model aggregate mixtures and the proposed simulation framework is promising for optimizing the mixture gradation design numerically.

Extrinsic calibration of a laser displacement sensor in a non-contact coordinate measuring machine

In order to implement 3D scanning of those complicated parts such as blades in the aviation field,a non-contact optical measuring system is established in the paper,which integrates a laser displacement sensor,a probe head,the frame of a coordinate measuring machine（CMM）,etc.As the output of the laser sensor directly obtained possesses the 1D length of the laser beam,it needs to determine the unit direction vector of the laser beam denoted as（l,m,n）by calibration so as to convert the 1D values into 3D coordinates of target points.Therefore,an extrinsic calibration method based on a standard sphere is proposed to accomplish this task in the paper.During the calibration procedure,the laser sensor moves along with the motion of the CMM and gathers the required data on the spherical surface.Then,both the output of the laser sensor and the grating readings of the CMM are substituted into the constraint equation of the spherical surface,in which an over-determined nonlinear equation group containing unknown parameters is established.For the purpose of solving the equation group,a method based on non-linear least squares optimization is put forward.Finally,the system after calibration is utilized to measure the diameter of a metallic sphere 10 times from different orientations to verify the calibration accuracy.In the experiment,the errors between the measured results and the true values are all smaller than 0.03 mm,which manifests the validity and practicality of the extrinsic calibration method presented in the paper.

Experimental and numerical studies of the blast-induced overbreak and underbreak in underground roadways

Overbreak and underbreak are the crucial problems during the blasting excavation of underground tunnels owing to their effects on the construction costs and operational safety.A critical challenge facing overbreak and underbreak control is the difficulty in developing guidelines with respect to various and complex engineering conditions.In this study,a series of field measurements of overbreak and underbreak using the Focus^(S)150 laser scanner were performed in a deep roadway of the Kaiyang phosphate mine,China.The distri-bution and extent of the overbreak and underbreak surrounding the roadway contour were accurately analyzed in accordance with the collected point cloud data.Subsequently,a simplified three-dimensional model was established to simulate the blasting excavation of pre-stressed roadway using the explicit dynamic analysis code LS-DYNA.A comparison of numerical and measurement results revealed that the proposed model was a reliable tool to simulate the overbreak and underbreak induced by blasting excavation.Thereafter,the influ-ences of uncontrollable geological factors such as in situ stress conditions and controllable blasting factors including contour hole spac-ing(S),charge concentration(b)and decoupled coefficient(f)as well as stemming were further numerically investigated.The simulation results indicated that the lateral pressure coefficient significantly affected the distribution pattern of the overbreak and underbreak,while the stress magnitude contributed to their extents.Moreover,a comparison of the simulation findings and the field measurement data indicated that the minimal extents of the overbreak and underbreak corresponding the optimal contour blasting results were obtained at S=0.70 m,b=0.9 kg/m and f=2.5,respectively.Furthermore,the contour blastholes stemmed with sand created smaller damage to the periphery rock mass of roadway and enhanced the utilization efficiency of explosive energy.The research findings of this study pro-vide important implications for similar blasting excavation projects.

Point cloud simplification algorithm based on particle swarm optimization for online measurement of stored bulk grain

The simplification of 3D laser scanning point cloud is an important step of surface reconstruction and volume estimation of bulk grain in granary.This study presented an adaptive simplification algorithm based on particle swarm optimization(PSO).It introduced PSO into the average distance method,a conventional simplification method.The basic idea of this algorithm was to adaptively determine the optimal point reducing intervals of scanning lines according to original point cloud density by PSO.By using the 3D point cloud scanned from bulk grain surface in granary,the proposed algorithm was validated.Compared with the average distance method,the proposed algorithm obtained more evenly distributed point set,smaller reduction ratio(6.96%)and higher volume estimation accuracy(relative error was less than 3‰).The 3D laser scanner(GSLS003,Jilin University and SkyViTech Co.,Ltd.,Hangzhou,China)used in this study could scan the complete picture of the grain surface in a granary in one time,so the acquired point cloud data do not have to be jointed.For the good simplification performance and capability of updating the reducing interval at any moment,the proposed algorithm and the 3D laser scanner could be used to realize online real-time measurement of stored bulk grain volume in granary.