Mineral Geochemistry of Apatite in the Jiama PorphyrySkarn Deposit,Tibet and its Geological Significance

The Jiama deposit,a significant porphyry-skarn-type copper polymetallic deposit located within the Gangdese metallogenic belt in Tibet,China,exemplifies a typical porphyry metallogenic system.However,the mineral chemistry of its accessory minerals remains under-examined,posing challenges for resource assessment and ore prospecting.Utilizing electron microprobe analysis and LA-ICP-MS analysis,this study investigated the geochemical characteristics of apatite in ore-bearing granite and monzogranite porphyries,as well as granodiorite,quartz diorite,and dark diorite porphyries in the deposit.It also delved into the diagenetic and metallogenic information from these geochemical signatures.Key findings include:(1)The SiO_(2) content,rare earth element(REE)contents,and REE partition coefficients of apatite indicate that the dark diorite porphyry possibly does not share a cogenetic magma source with the other four types of porphyries;(2)the volatile F and Cl contents in apatite,along with their ratio,indicate the Jiama deposit,formed in a collisional setting,demonstrates lower Cl/F ratios in apatite than the same type of deposits formed in a subduction environment;(3)compared to non-ore-bearing rock bodies in other deposits formed in a collisional setting,apatite in the Jiama deposit exhibits lower Ce and Ga contents.This might indicate that rock bodies in the Jiama deposit have higher oxygen fugacity.Nevertheless,the marginal variation in oxygen fugacity between ore-bearing and non-ore-bearing rock bodies within the deposit suggests oxygen fugacity may not serve as the decisive factor in the ore-hosting potential of rock bodies in the Jiama deposit.

Apatite Fission Track Thermochronology of Granite from the Xiazhuang Uranium Ore Field,South China:Implications for Exhumation History and Ore Preservation

Xiazhuang uranium ore field,located in the southern part of the Nanling Metallogenic Belt,is considered one of the largest granite-related U regions in South China.In this paper,we contribute new apatite fission track data and thermal history modeling to constrain the exhumation history and evaluate preservation potential of the Xiazhuang Uranium ore field.Nine Triassic outcrop granite samples collected from different locations of Xiazhuang Uranium ore field yield AFT ages ranging from 43 to 24 Ma with similar mean confined fission track lengths ranging from 11.8±2.0 to 12.9±1.9μm and Dpar values between 1.01 and 1.51μm.The robustness time-temperature reconstructions of samples from the hanging wall of Huangpi fault show that the Xiazhuang Uranium ore field experienced a time of monotonous and slow cooling starting from middle Paleocene to middle Miocene(~60-10 Ma),followed by relatively rapid exhumation in the late Miocene(~10-5 Ma)and nearly thermal stability in the Pliocene-Quaternary(~5-0 Ma).The amount of exhumation after U mineralization since the Middle Paleogene was estimated as~4.3±1.8 km according to the integrated thermal history model.Previous studies indicate that the ore-forming ages of U deposits in the Xiazhuang ore field are mainly before Middle Paleocene and the mineralization depths are more than 4.4±1.2 km.Therefore,the exhumation history since middle Paleocene plays important roles in the preservation of the Xiazhuang Uranium ore field.

Apatite Fission-Track Thermochronology in the Tamusu Area,Bayingobi Basin,NW China,and its Geological Significance

The Bayingobi basin is located in the middle of Central Asia Orogenic Belt,at the intersection of Paleo-Asian Ocean and Tethys Ocean,as well as the junction of multiple tectonic plates.This unique tectonic setting underpins the basin's intricate history of tectonic activity.To unravel the multifaceted tectono-thermal evolution within the southwestern region of the basin and to elucidate the implications of sandstone-hosted uranium mineralization,granitic and clastic rock samples were collected from the Zongnai Mts.uplift and Yingejing depression,and apatite fission track(AFT)dating and thermal history simulation analysis were performed.AFT dating findings reveal that the apparent ages of all samples fall within the range of 244 Ma to 112 Ma.In particular,the bedrock of the Zongnai Mts.and Jurassic detrital apatite fission tracks have undergone complete annealing,capturing the uplift-cooling age.Meanwhile,the AFT ages of Cretaceous detrital rocks are either equivalent to or notably exceed the age of sedimentary strata,signifying the cooling age of the provenance.A comprehensive examination of AFT ages and palaeocurrent direction analyses suggests that the Cretaceous source in the Tamusu area predominantly originated from the central and southern sectors of the Zongnai Mts.uplift.However,at a certain juncture during the Late Early Cretaceous,the Cretaceous provenance expanded to include the northern part of the Zongnai Mts.uplift.Based on the results of thermal history simulations and previous studies,it is considered that the Tamusu area has undergone four distinct tectonic uplift events since the Late Paleozoic.The first is the Late Permian to Early Triassic(260-240 Ma),which is associated with the closure of the Paleo-Asian Ocean and the accretionary orogeny within the Alxa region.The second uplift event took place in the Early Jurassic(190-175 Ma)and corresponded to intraplate orogeny following the closure of the Paleo-Asian Ocean.The third uplift event is the Late Jurassic to Early Cretaceous(160-120 Ma),which is linked to the East Asia's position as the convergence center of multiple tectonic plates during this period.The fourth uplift event is linked to the Late Early Cretaceous(112-100 Ma),driven either by the westward subduction of the eastern Pacific plate or the mantle upwelling resulting from the Bangong-Nujiang oceanic lithosphere subduction and slab break-off.The primary stress orientation for the first three tectonic uplift phases approximated a nearly SN direction,while the fourth stage featured a principal stress direction of NW.The fourth tectonic uplift event of the Late Early Cretaceous and basaltic eruption thermal event during this period likely exerted a significant influence on the formation of the Tamusu sandstone-hosted uranium deposit.

Effect of alkali treatments on apatite formation of microarc-oxidized coating on titanium alloy surface

Alkali treatments with three concentrations were used to modify a microarc-oxidized(MAO) coating on titanium alloy surface in order to further improve its surface bioactivity. Morphology, chemical compositions and phase constitues, roughness, contact angle and apatite induction of the alkali-treated coatings were studied and compared. Scanning electron microscope(SEM) was applied to observe the morphologies, X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS) were used to detect the phase constitutes and chemical compositions, a surface topography profilometer was used to analyze the surface roughness, and contact angle was measured by liquid drop method. Alkali treatements result in the formation of Na2Ti6O13 and Na2Ti3O7 phase on the MAO coating, which leads to the increase of surface roughness and the decrease of contact angle. Experimental results showed that the apatite induction of the alkali-treated coatings was dependent on the applied alkali concentrations during treatments, and Na+concentration can promote the formation of apatite phase.

Synthesis and Characterization of Hydroxyapatite Powder by Eggshell

Hydroxyapatite (HA) having chemical formula Ca10(PO4)6(OH)2, is the main chemical component of human bone tissue (70%). This is the reason why it has been widely engaged in the dental and non-load bearing implantations, to cope up with the bone response as a bioactive material. In this study HA powder was synthesized by wet chemical method, using phosphoric acid (H3PO4) and eggshells. The synthesized HA powder was characterized by X-ray diffraction analysis, Scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDX) and Fourier transform (FT-IR) spectroscopy. The Thermos gravimetric analysis (TGA-DTA) was also carried out to evaluate the stability of the synthesized HA powder at higher temperatures. The results of the study indicate that sintered (at 900°C) HA powder resembles the feature of pure and single apatite phase having favourable Ca/P ratio ranging from 1.7 to 2.4.

In vitro study of iron doped hydroxyapatite

The effect of iron substitution on the bioactivity of hydroxyapatite (HAp) under the physiological conditions was investigated. Five samples of iron doped hydroxyapatite (FeHAp) with different iron concentrations (0, 0.05, 0.1, 0.2, and 0.3 mol%) were synthesized by wet chemical method. The formation of bone-like apatite layer on the surface of the samples was detected using X-ray diffraction (XRD), Fourier transforms infrared (FTIR) and scanning electron microscope techniques. The changes of the pH of SBF medium were measured at pre-determined time intervals using a pH meter. The dissolution of calcium, phosphorus and iron ions in SBF medium was determined by single beam scanning spectrophotometer. XRD and FTIR results exhibit the formation of carbonate apatite layer on the surface of the immersed samples, which increase with the increase of iron content. SEM results showed agglomeration of small crystals on the surface of the immersed samples. The solubility and dissolution tests revealed that iron doped HAp samples had a higher solubility and dissolution rate than pure sample, which indicated that iron increased the bioactivity of HAp in vitro.

Cenozoic Exhumation and Thrusting in the Northern Qilian Shan,Northeastern Margin of the Tibetan Plateau:Constraints from Sedimentological and Apatite Fission-Track Data

The Qilian Shan lies along the northeastern edge of the Tibetan Plateau. To constrain its deformation history, we conducted integrated research on Mesozoic-Cenozoic stratigraphic sections in the Jiuxi Basin immediately north of the mountain range. Paleocurrent measurements, sandstone compositional data, and facies analysis of Cenozoic stratigraphic sections suggest that the Jiuxi Basin received sediments from the Altyn Tagh Range in the northwest, initially in the Oligocene （-33 Ma）, depositing the Huoshaogou Formation in the northern part of the basin. Later, the source area of the Jiuxi Basin changed to the Qilian Shan in the south during Late Oligocene （-27 Ma）, which led to the deposition of the Baiyanghe Formation. We suggest that uplift of the northern Qilian Shan induced by thrusting began no later than the Late Oligocene. Fission-track analysis of apatite from the Qilian Shan yields further information about the deformation history of the northern Qilain Shan and the Jiuxi Basin. It shows that a period of rapid cooling, interpreted as exhumation, initiated in the Oligocene. We suggest that this exhumation marked the initial uplift of the Qilian Shan resulting from the India-Asia collision.

Late Mesozoic-Cenozoic Exhumation of the Northern Hexi Corridor：Constrained by Apatite Fission Track Ages of the Longshoushan

The apatite fission track（AFT） ages and thermal modeling of the Longshoushan and deformation along the northern Hexi Corridor on the northern side of the Qinghai-Tibetan Plateau show that the Longshoushan along the northern corridor had experienced important multi-stage exhumations during the Late Mesozoic and Cenozoic. The AFT ages of 7 samples range from 31.9 Ma to 111.8 Ma.Thermal modeling of the AFT ages of the samples shows that the Longshoushan experienced significant exhumation during the Late Cretaceous to the Early Cenozoic（-130-25 Ma）. The Late Cretaceous exhumation of the Longshoushan may have resulted from the continuous compression between the Lhasa and Qiangtang blocks and the flat slab subduction of the Neo-Tethys oceanic plate, which affected wide regions across the Qinghai-Tibetan Plateau. During the Early Cenozoic, the Longshoushan still experienced exhumation, but this process was caused by the Indian-Eurasian collision. Since this time,the Longshoushan was in a stable stage for approximately 20 Ma and experienced erosion. Since -5 Ma,obvious tectonic deformation occurred along the entire northern Hexi Corridor, which has also been reported from the peripheral regions of the Qinghai-Tibetan Plateau, especially in the Qilianshan and northeastern margin of the plateau. The AFT ages and the Late Cenozoic deformation of the northern Hexi Corridor all indicate that the present northern boundary of the Qinghai-Tibetan Plateau is situated along the northern Hexi Corridor.

The Exhumation History of North Qaidam Thrust Belt Constrained by Apatite Fission Track Thermochronology:Implication for the Evolution of the Tibetan Plateau

Determining the spatio-temporal distribution of the deformation tied to the India-Eurasian convergence and the impact of pre-existing weaknesses on the Cenozoic crustal deformation is significant for understanding how the convergence between India and Eurasia contributed to the development of the Tibetan Plateau. The exhumation history of the northeastern Tibetan Plateau was addressed in this research using a new apatite fission track （AFT） study in the North Qaidam thrust belt （NQTB）. Three granite samples collected from the Qaidam Shan pluton in the north tied to the Qaidam Shan thrust, with AFT ages clustering in the Eocene to Miocene. The other thirteen samples obtained from the Luliang Shan and Yuka plutons in the south related to the Luliang Shan thrust and they have showed predominantly the Cretaceous AFT ages. Related thermal history modeling based on grain ages and track lengths indicates rapid cooling events during the Eocene-early Oligocene and since late Miocene within the Qaidam Shan, in contrast to those in the Cretaceous and since the Oligocene-Miocene in the Luliang Shan and Yuka region. The results, combined with published the Cretaceous thermochronological ages in the Qaidam Shan region, suggest that the NQTB had undergo rapid exhumation during the accretions along the southern Asian Andean-type margin prior to the India-Eurasian collision. The Cenozoic deformation initially took place in the North Qaidam thrust belt by the Eocene, which is consistent with the recent claim that the deformation of the northeastern Tibetan Plateau initiated in the Eocene as a response to continental collision between India and Eurasia. The immediate deformation responding to the collision is tentatively attributed to the preexisting weaknesses of the lithosphere, and therefore the deformation of the northeastern Tibetan Plateau should be regarded as a boundary-condition-dependent process.

Meso-Cenozoic Tectonic Events Recorded by Apatite Fission Track in the Northern Longmen-Micang Mountains Region

There is a cross-cutting relationship between the E-W trending structures and the NE- trending structures in the northern Longmen-Micang Mountains region, which reflects possible regional tectonic transition and migration. Apatite fission track （AFT） analyses of 15 samples collected from this area yield apparent ages varying from 30.3±4.2 Ma to 111.7±9.0 Ma and confined-track-lengths ranging from 10.6±0.3 pm to 12.4±0.1 μm. Four specific groups were identified on the basis of the Track Age Spectrum Calculation （TASC） patterns, i.e., 143-112 Ma, 93.6-88 Ma, 42-40 Ma and -25.6 Ma. These age groups correspond to the spatial distributions of datasets and may represent four tectonic events. Together with the regional deformation patterns, the four age groups are interpreted to indicate tectonic superposition, transition and migration during the Meso-Cenozoic with the following possible order： （1） the Micang Mountains belt was dominated by the E-W trending structure during 143-112 Ma; （2） the contraction of the Longmen Mountains belt from the NW to the SE during 93.6-88 Ma led to the superposition of the NE-trending structures over the E-W trendinding structures; （3） dextral strike-slip shear dominated the Longmen Mountains belt at 42-40 Ma; （4） westward migration of the active tectonic belt occurred from 93.6-25.6 Ma in a break-back sequence in the northern Longmen Mountains belt. The Late Cenozoic tectonics in the northern Longmen Mountains belt are characterized by the dextral strike-slip shear and the occurrence of westward break-back sequence of deformations. As a result, north-south differences in deformations along the Longmen Mountains belt were intensified since the Miocene time and strains were mainly accumulated in the hinterland of the Longmen Mountains instead of being propagated to the foreland basin.

Apatite fission track thermochronology in the Kuluketage and Aksu areas,NW China:Implication for tectonic evolution of the northern Tarim

Tarim Precambrian bedrocks are well exposed in the Kuluketage and Aksu areas, where twenty four samples were taken to reveal the denudation history of the northern Tarim Craton. Apatite fission track dating and thermal history modeling suggest that the northern Tarim experienced multi-stage cooling events which were assumed to be associated with the distant effects of the Cimmerian orogeny and India-Eurasia collision in the past. But the first episode of exhumation in the northern Tarim, occurring in the mid-Permian to Triassic, is here suggested to be induced by docking of the Tarim Craton and final amalgamation of the Central Asian Orogenic Belt. The cooling event at ca. 170 Ma may be triggered by the Qiangtang-Eurasia collision. Widespread Cretaceous exhumation could be linked with docking of the Lhasa terrane in the late Jurassic. Cenozoic reheating and recooling likely occurred because of the northpropagating stress, however, this has not affected the northern Tarim much because the Tarim is characterized by rigid block-like motion.

Evolution of Tectonic Uplift, Hydrocarbon Migration, and Uranium Mineralization in the NW Junggar Basin： An Apatite Fission-Track Thermochronology Study

The Mesozoic–Cenozoic tectonic movement largely controls the northwest region of the Junggar Basin（NWJB）, which is a significant area for the exploration of petroleum and sandstone-type uranium deposits in China. This work collected six samples from this sedimentary basin and surrounding mountains to conduct apatite fission track（AFT） dating, and utilized the dating results for thermochronological modeling to reconstruct the uplift history of the NWJB and its response to hydrocarbon migration and uranium mineralization. The results indicate that a single continuous uplift event has occurred since the Early Cretaceous, showing spatiotemporal variation in the uplift and exhumation patterns throughout the NWJB. Uplift and exhumation initiated in the northwest and then proceeded to the southeast, suggesting that the fault system induced a post spread-thrust nappe into the basin during the Late Yanshanian. Modeling results indicate that the NWJB mountains have undergone three distinct stages of rapid cooling： Early Cretaceous（ca. 140–115 Ma）, Late Cretaceous（ca. 80–60 Ma）, and Miocene–present（since ca. 20 Ma）. These three stages regionally correspond to the LhasaEurasian collision during the Late Jurassic–Early Cretaceous（ca. 140–125 Ma）, the Lhasa-Gandise collision during the Late Cretaceous（ca. 80–70 Ma）, and a remote response to the India-Asian collision since ca. 55 Ma, respectively. These tectonic events also resulted in several regional unconformities between the J3/K1, K2/E, and E/N, and three large-scale hydrocarbon injection events in the Piedmont Thrust Belt（PTB）. Particularly, the hydrocarbon charge event during the Early Cretaceous resulted in the initial inundation and protection of paleo-uranium ore bodies that were formed during the Middle–Late Jurassic. The uplift and denudation of the PTB was extremely slow from 40 Ma onward due to a slight influence from the Himalayan orogeny. However, the uplift of the PTB was faster after the Miocene, which led to re-uplift and exposure at the surface during the Quaternary, resulting in its oxidation and the formation of small uranium ore bodies.

Geochemistry of Apatite from the Apatite-rich Iron Deposits in the Ningwu Region,East Central China

Four types of apatite have been identified in the Ningwu region. The first type of apatite is widely distributed in the middle dark colored zones （i.e. iron ores） of individual deposits. The assemblage includes magnetite, apatite and actinolite （or diopside）. The second type occurs within magnetite-apatite veins in the iron ores. The third type is seen in magnetite-apatite veins and （or） nodules in host rocks （i.e. gabbro-diorite porphyry or gabbro-diorite or pyroxene diorite）.The fourth type occurs within apatite-pyrite-quartz veins f＇dfing fractures in the Xiangshan Group. Rare earth elements （REE） geochemistry of apatite of the four occurrences in porphyry iron deposits is presented. The REE distribution patterns of apatite are generally similar to those of apatites in the Kiruna-type iron ores, nelsonites. They are enriched in fight REE, with pronounced negative Eu anomalies. The similarity of REE distribution patterns in apatites from various deposits in different locations in the world indicates a common process of formation for various ore types, e.g. immiscibility. Early magmatic apatites contain 3031.48-12080 ×10^-6 REE. Later hydrothermal apatite contains 1958 ×10^-6 REE, indicating that the later hydrothermal ore-forming solution contains lower REE. Although gabbro-diorite porphyry and apatite show similar REE patterns, gabbro-diorite porphyries have no europium anomalies or feeble positive or feeble negative europium anomalies, caused both by reduction environment of mantle source region and by fractionation and crystallization （immiscibility） under a high oxygen fugacity condition. Negative Eu anomalies of apatites were formed possibly due to acquisition of Eu^2＋ by earlier diopsite during ore magma cooling. The apatites in the Aoshan and Taishan iron deposits yield a narrow variation range of ^87Sr/^86Sr values from 0.7071 to 0.7073, similar to those of the volcanic and subvolcaulc rocks, indicating that apatites were formed by liquid immiscibility and differentiation of intermediate and basic magmas.

New Apatite Fission-Track Ages of the Western Kuqa Depression:Implications for the Mesozoic–Cenozoic Tectonic Evolution of South Tianshan,Xinjiang

The Mesozoic–Cenozoic uplift history of South Tianshan has been reconstructed in many ways using thermochronological analyses for the rocks from the eastern Kuqa Depression. The main difference in the reconstructions concerns the existence and importance of Early Cretaceous and Paleogene tectonic activities, but the existence of a Cenozoic differential uplift in the Kuqa Depression remains enigmatic. Here, we present new apatite fission-track ages obtained for 12 sandstone samples from the well-exposed Early Triassic to Quaternary sequence of the Kapushaliang section in the western Kuqa Depression. The results reveal that there were four pulses of tectonic exhumation, which occurred during the Early Cretaceous（peak ages of 112 and 105 Ma）, Late Cretaceous（peak age of 67 Ma）, Paleocene–Eocene（peak ages at 60, 53, and 36 Ma）, and early Oligocene to late Miocene（central ages spanning 30–11 Ma and peak ages of 23 and 14 Ma）, respectively. A review of geochronological and geological evidence from both the western and eastern Kuqa Depression is shown as follows.（1） The major exhumation of South Tians Shan during the Early Cretaceous was possibly associated with docking of the Lhasa block with the southern margin of the Eurasian plate.（2） The Late Cretaceous uplift of the range occurred diachronically due to the far-field effects of the Kohistan-Dras Arc and Lhasa block accretion.（3） The Paleogene uplift in South Tianshan initially corresponded to the far-field effects of the India–Eurasia collision.（4） The rapid exhumation in late Cenozoic was driven by the continuous far-field effects of the collision between India and Eurasia plates. The apatite fission-track ages of 14–11 Ma suggest that late Cenozoic exhumation in the western Kuqa Depression prevailed during the middle to late Miocene, markedly later than the late Oligocene to early Miocene activity in the eastern segment. It can be hypothesized that a possible differential uplift in time occurred in the Kuqa Depression during the late Cenozoic.

Late Mesozoic Thermotectonic Evolution of the Jueluotage Range,Eastern Xinjiang,Northwest China:Evidence from Apatite Fission Track Data

Although many authors have emphasized the Cenozoic history of deformation, exhumation and cooling in the Tiaushan area related to the India-Asia collision, very little is known about the Mesozoic history of compression and uplift within the Tianshan. In order to obtain information about the Mesozoic exhumation history and processes of cooling in eastern Tianshan, fission track methods on apatite were used. Sampling was made in the Jueluotage Range. Three samples （Z001-Z003） were taken from granite in borehole ZK6301 of Yandong pluton; the ages range from 97.0 to 87.6 Ma that are much younger than the pluton age which was dated by U-Pb zircon at 334±2 Ma. Two samples in northern piedmont of the Jueluotage Range were collected from Jurassic strata in Dikaner （DK001） and Dananhu （D001） whose ages are 91.5 and 93.4 Ma respectively. The average apparent exhumation rate is 0.039 nun/a calculated by extrapolation on the basis of Yandong samples, indicating an extremely slow exhumation in the Jueluotage Range since the Late Cretaceous. Two Jurassic samples reached the maximum depths after deposition and experienced the maximum temperatures of ca. 105 and 108℃ until the late Early Cretaceous before a period of cooling and exhumation occurred at 114 and 106 Ma.

Integration of zircon and apatite U–Pb geochronology and geochemical mapping of the Wude basalts(Emeishan large igneous province):A tool for a better understanding of the tectonothermal and geodynamic evolution of the Emeishan LIP

Radiogenic isotopic dating and Lu–Hf isotopic composition using laser ablation-inductively coupled plasma-mass spectrometry(LA-ICP-MS)of the Wude basalt in Yunnan province from the Emeishan large igneous province(ELIP)yielded timing of formation and post-eruption tectonothermal event.Holistic lithogeochemistry and elements mapping of basaltic rocks were further reevaluated to provide insights into crustal contamination and formation of the ELIP.A zircon U–Pb age of 251.3±2.0 Ma of the Wude basalt recorded the youngest volcanic eruption event and was consistent with the age span of 251-263 Ma for the emplacement of the ELIP.Such zircons hadε_(Hf)(t)values ranging from7.3 to+2.2,identical to those of magmatic zircons from the intrusive rocks of the ELIP,suggesting that crust-mantle interaction occurred during magmatic emplacement,or crust-mantle mixing existed in the deep source region prior to deep melting.The apatite U–Pb age at 53.6±3.4 Ma recorded an early Eocene magmatic superimposition of a regional tectonothermal event,corresponding to the Indian–Eurasian plate collision.Negative Nb,Ta,Ti and P anomalies of the Emeishan basalt may reflect crustal contamination.The uneven Nb/La and Th/Ta values distribution throughout the ELIP supported a mantle plume model origin.Therefore,the ELIP was formed as a result of a mantle plume which was later superimposed by a regional tectonothermal event attributed to the Indian–Eurasian plate collision during early Eocene.

Late Cretaceous-Cenozoic Multi-Stage Denudation at the Western Ordos Block： Constraints by the Apatite Fission Track Dating on the Langshan

The apatite fission track dating of samples from the Dabashan （i.e., the Langshan in the northeastern Alxa Block） by the laser ablation method and their thermal history modeling of AFT ages are conducted in this study. The obtained results and lines of geological evidence in the study region indicate that the Langshan has experienced complicated tectonic-thermal events during the the Late Cretaceous-Cenozoic. Firstly, it experienced a tectonic-thermal event in the Late Cretaceous （-90-70 Ma）. The event had little relation with the oblique subduction of the Izanagi Plate along the eastern Eurasian Plate, but was related to the Neo-Tethys subduction and compression between the Lhasa Block and Qiangtang Block. Secondly, it underwent the dextral slip faulting in the Eocene （-50-45 Ma）. The strike slip fault may develop in the same tectonic setting as sinistral slip faults in southern Mongolia and thrusts in West Qinling to the southwest Ordos Block in the same period, which is the remote far-field response to the India-Eurasia collision. Thirdly, the tectonic thermal event existed in the late Cenozoic （since -10 Ma）, thermal modeling shows that several samples began their denudation from upper region of partial annealing zone （PAZ）, and the denudation may have a great relationship with the growth of Qinghai-Tibetan Plateau to the northeast. In addition, the AFT ages of Langshan indicate that the main body of the Langshan may be an upper part of fossil PAZ of the Late Cretaceous （-70 Ma）. The fossil PAZ were destroyed and deformed by tectonic events repeatedly in the Cenozoic along with the denudation.

Synthesis and Ionic Conduction of Cation-deficient Apatite La9.33-2x/3MxSi6O26 Doped with Mg, Ca, Sr

Apatite-type lanthanum silicate with special conduction mechanism via interstitial oxygen has attracted considerable interest in recent years. In this work, pure powder of La9.33 2x/3MxSi6O26 （M=Mg, Ca, Sr） is prepared by the sol-gel method with sintering at 1000℃. The powder is characterized by X-ray diffraction （XRD） and scanning electron micrograph （SEM）. The apatite can be obtained at relatively low temperature as compared to the conventional solid-state reaction method. The measurements of conductivity of a series of doped samples La9.33-2x/3MxSi6O26 （M=Ca, Mg, Sr） indicate that the type of dopant and the amount have a significant effect on the conductivity. The greatest decrease in conductivity is observed for Mg doping, following the Ca and the Sr doped apatites. The effect is ultimately attributed to the amount of oxygen interstitials, which is affected by the crystal lattice distortion arising from cation vacancies.

Removal of dolomite and potassium feldspar from apatite using simultaneous flotation with a mixed cationic-anionic collector

This study aims to investigate the effect of a cationic-anionic mixed collector(dodecyltrimethyl ammonium bromide/sodium oleate(DTAB/NaOL)on the selective separation of apatite,dolomite,and potassium feldspar.Herein,several experimental methods,including flotation experiments,zeta-potential detection,microcalorimetry detection,XPS analysis and FTIR measurements,were used.The flotation tests showed that dolomite and potassium feldspar can be successfully removed from apatite simultaneously when the molar ratio of DTAB to NaOL was 2:1 with pH 4.5.Zeta-potential and microcalorimetry detection suggested that NaOL and DTAB were adsorbed on the surface of dolomite and potassium feldspar respectively,and part of NaOL and DTAB formed co-adsorption on the surface of potassium feldspar to enhance the floatability of potassium feldspar.The XPS and FTIR spectra analysis demonstrated that the cationic collector,DTAB,was first adsorbed on the surface of potassium feldspar through electrostatic attraction in the DTAB/NaOL mixture system.Subsequently,the anionic NaOL collector and cationic DTAB collector form an electron neutralisation complex,thereby resulting in co-adsorption on the surface of potassium feldspar.NaOL was chemically reacted and adsorbed on dolomite surface,but almost no collector was adsorbed on apatite surface.Finally,the adsorption models of different collectors on mineral surface were obtained.

Depressing effect of sodium hexametaphosphate on apatite in flotation of rutile

The separation of rutile from apatite by flotation and the mechanism of depressing the apatite of sodium hexametaphosphate were studied. The results showed that rutile and apatite could be separated by using alkyl-imino-bismethylene phosphoric acid and sodium hexametaphosphate as a collector and a regulator, respectively. Sodium hexametaphosphate could selectively dissolve calcium ions on the apatite surface, and make calcium ions break away from lattice binding through combining.