本文综合利用透射电子显微镜(transmission electron microscopy,TEM)及高分辨透射电子显微镜(high resolution transmission electron microscope,HRTEM)电子显微表征技术,对冲击变形时效AZ91镁合金中变形孪晶与β⁃Mg17Al12析出相交互...本文综合利用透射电子显微镜(transmission electron microscopy,TEM)及高分辨透射电子显微镜(high resolution transmission electron microscope,HRTEM)电子显微表征技术,对冲击变形时效AZ91镁合金中变形孪晶与β⁃Mg17Al12析出相交互作用引发的变形结构进行了观察和表征。结果表明:(1)β析出相阻碍{1012}孪晶生长使其界面形成台阶结构导致孪晶板条呈现粗细不均的形貌,更严重的交互作用可导致孪晶界发生大角度弯折,同时诱发基体中扭折带的形成以协调孪晶变形;(2){1011}孪晶与β析出相的交互作用会产生局域应力集中,导致连锁诱发{1012}孪晶形核,表明孪晶与析出相的交互作用可以促进孪晶形核。展开更多
The metallurgical quality control of magnesium(Mg)and Mg alloys in melting process is required to ensure a satisfied mechanical and corrosion performance,while the typical used steel crucible introduces impurities and...The metallurgical quality control of magnesium(Mg)and Mg alloys in melting process is required to ensure a satisfied mechanical and corrosion performance,while the typical used steel crucible introduces impurities and interfacial interaction during melting process.Therefore,a systematic study about impurities diffusion and interfacial interaction between molten Mg and steel is necessary.In the present study,the interfacial reaction between molten AZ91D Mg alloy and mild steel during melting process was investigated with the melting temperatures of 700℃,750℃ and 800℃.The results show that Al(Fe,Mn)intermetallic layer is the intermetallic primarily formed at the interfaces of AZ91D melt and mild steel.Meanwhile,Al_(8)(Mn,Fe)5is indexed between Al(Fe,Mn)and AZ91D.AlFe_(3)C appears between the mild steel and Al(Fe,Mn)at 700℃ and 750℃,but absent at 800℃ due to the increased solubility of carbon in Mg matrix.It is found that the growth of the intermetallic layer is controlled by diffusion mechanism,and Al and Mn are the dominant diffusing species in the whole interfacial reaction process.By measuring the thickness of different layers,the growth constant was calculated.It increases from 1.89(±0.03)×10^(-12)m^(2)·s^(-1)at 700℃ to 3.05(±0.05)×10^(-12)m^(2)·s^(-1)at 750℃,and 5.18(±0.05)×10^(-12)m^(2)·s^(-1)at 800℃.Meanwhile,the content of Fe is linearly increased in AZ91D with the increase of holding time at 700℃ and 750℃,while it shows a significantly increment after holding for 8 h at 800℃,indicating holding temperature is more crucial to determine the Fe content of AZ91D than holding time.展开更多
This work proposed a strategy of indirectly inducing uniform microarc discharge by controlling the content and distribution ofβ-Mg_(17)Al_(12)phase in AZ91D Mg alloy.Two kinds of nano-particles(ZrO_(2)and TiO_(2))wer...This work proposed a strategy of indirectly inducing uniform microarc discharge by controlling the content and distribution ofβ-Mg_(17)Al_(12)phase in AZ91D Mg alloy.Two kinds of nano-particles(ZrO_(2)and TiO_(2))were designed to be added into the substrate of Mg alloy by friction stir processing(FSP).Then,Mg alloy sample designed with different precipitated morphology ofβ-Mg_(17)Al_(12)phase was treated by microarc oxidation(MAO)in Na_(3)PO_(4)/Na2SiO3electrolyte.The characteristics and performance of the MAO coating was analyzed using scanning electron microscopy(SEM),energy dispersive spectrometer(EDS),X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),contact angle meter,and potentiodynamic polarization.It was found that the coarseα-Mg grains in extruded AZ91D Mg alloy were refined by FSP,and theβ-Mg_(17)Al_(12)phase with reticular structure was broken and dispersed.The nano-ZrO_(2)particles were pinned at the grain boundary by FSP,which refined theα-Mg grain and promoted the precipitation ofβ-Mg_(17)Al_(12)phase in grains.It effectively inhibited the“cascade”phenomenon of microarcs,which induced the uniform distribution of discharge pores.The MAO coating on Zr-FSP sample had good wettability and corrosion resistance.However,TiO_(2)particles were hardly detected in the coating on TiFSP sample.展开更多
In this study,the phase transformations,crystallization kinetics and dissolution mechanism ofβphase(Mg_(17)Al_(12))in magnesium alloy AZ91 were investigated by optical microscopy,X-ray diffraction,differential scanni...In this study,the phase transformations,crystallization kinetics and dissolution mechanism ofβphase(Mg_(17)Al_(12))in magnesium alloy AZ91 were investigated by optical microscopy,X-ray diffraction,differential scanning calorimetry and differential dilatometry.The results indicate that this AZ91 alloy undergoes a phase transformation during aging,a discontinuous precipitation of theβphase(Mg_(17)Al_(12))at 150℃at the grain boundaries and another continuous at 350℃within the grains.The activation energy of the dissolution reaction of theβphase(Mg_(17)Al_(12))under non-isothermal conditions is 116.781 kJ/mol,while it is 129.7383 kJ/mol under isothermal conditions.The Avrami coefficient,n,relevant for the dissolution kinetics of theβphase(Mg_(17)Al_(12))is 1.152 and 1.211 in the non-isothermal and isothermal conditions respectively.The numerical coefficients m and Avrami n are 0.993 and 1.152.展开更多
文摘本文综合利用透射电子显微镜(transmission electron microscopy,TEM)及高分辨透射电子显微镜(high resolution transmission electron microscope,HRTEM)电子显微表征技术,对冲击变形时效AZ91镁合金中变形孪晶与β⁃Mg17Al12析出相交互作用引发的变形结构进行了观察和表征。结果表明:(1)β析出相阻碍{1012}孪晶生长使其界面形成台阶结构导致孪晶板条呈现粗细不均的形貌,更严重的交互作用可导致孪晶界发生大角度弯折,同时诱发基体中扭折带的形成以协调孪晶变形;(2){1011}孪晶与β析出相的交互作用会产生局域应力集中,导致连锁诱发{1012}孪晶形核,表明孪晶与析出相的交互作用可以促进孪晶形核。
基金National Key Research and Development Program of China(No.2019YFB2006500)National Natural Science Foundation of China(Nos.51574100,51704087)Natural Science Foundation of Heilongjiang Province,China(No.LH2020E083)。
基金supported by the Natural Science Foundation of Chongqing,China(Grant Nos.cstc2020jcyj-msxm X0544,CSTB2022NSCQ-MSX0352,CSTB2022NSCQ-MSX0891,cstc2020jcyj-msxm X0184)Scientific and Technological Research Program of Chongqing Municipal Education Commission(Grant No.KJQN202001416)National Natural Science Foundation of China(Grant Nos.11847077,52001028)。
文摘The metallurgical quality control of magnesium(Mg)and Mg alloys in melting process is required to ensure a satisfied mechanical and corrosion performance,while the typical used steel crucible introduces impurities and interfacial interaction during melting process.Therefore,a systematic study about impurities diffusion and interfacial interaction between molten Mg and steel is necessary.In the present study,the interfacial reaction between molten AZ91D Mg alloy and mild steel during melting process was investigated with the melting temperatures of 700℃,750℃ and 800℃.The results show that Al(Fe,Mn)intermetallic layer is the intermetallic primarily formed at the interfaces of AZ91D melt and mild steel.Meanwhile,Al_(8)(Mn,Fe)5is indexed between Al(Fe,Mn)and AZ91D.AlFe_(3)C appears between the mild steel and Al(Fe,Mn)at 700℃ and 750℃,but absent at 800℃ due to the increased solubility of carbon in Mg matrix.It is found that the growth of the intermetallic layer is controlled by diffusion mechanism,and Al and Mn are the dominant diffusing species in the whole interfacial reaction process.By measuring the thickness of different layers,the growth constant was calculated.It increases from 1.89(±0.03)×10^(-12)m^(2)·s^(-1)at 700℃ to 3.05(±0.05)×10^(-12)m^(2)·s^(-1)at 750℃,and 5.18(±0.05)×10^(-12)m^(2)·s^(-1)at 800℃.Meanwhile,the content of Fe is linearly increased in AZ91D with the increase of holding time at 700℃ and 750℃,while it shows a significantly increment after holding for 8 h at 800℃,indicating holding temperature is more crucial to determine the Fe content of AZ91D than holding time.
基金funded by China Postdoctoral Science Foundation(No.2021M700569)Chongqing Postdoctoral Science Foundation(No.7 cstc2021jcyj-bshX0087)。
文摘This work proposed a strategy of indirectly inducing uniform microarc discharge by controlling the content and distribution ofβ-Mg_(17)Al_(12)phase in AZ91D Mg alloy.Two kinds of nano-particles(ZrO_(2)and TiO_(2))were designed to be added into the substrate of Mg alloy by friction stir processing(FSP).Then,Mg alloy sample designed with different precipitated morphology ofβ-Mg_(17)Al_(12)phase was treated by microarc oxidation(MAO)in Na_(3)PO_(4)/Na2SiO3electrolyte.The characteristics and performance of the MAO coating was analyzed using scanning electron microscopy(SEM),energy dispersive spectrometer(EDS),X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),contact angle meter,and potentiodynamic polarization.It was found that the coarseα-Mg grains in extruded AZ91D Mg alloy were refined by FSP,and theβ-Mg_(17)Al_(12)phase with reticular structure was broken and dispersed.The nano-ZrO_(2)particles were pinned at the grain boundary by FSP,which refined theα-Mg grain and promoted the precipitation ofβ-Mg_(17)Al_(12)phase in grains.It effectively inhibited the“cascade”phenomenon of microarcs,which induced the uniform distribution of discharge pores.The MAO coating on Zr-FSP sample had good wettability and corrosion resistance.However,TiO_(2)particles were hardly detected in the coating on TiFSP sample.
基金founded by Taif University,Taif,Saudi Arabia (TU-DSPP-2024-63).
文摘In this study,the phase transformations,crystallization kinetics and dissolution mechanism ofβphase(Mg_(17)Al_(12))in magnesium alloy AZ91 were investigated by optical microscopy,X-ray diffraction,differential scanning calorimetry and differential dilatometry.The results indicate that this AZ91 alloy undergoes a phase transformation during aging,a discontinuous precipitation of theβphase(Mg_(17)Al_(12))at 150℃at the grain boundaries and another continuous at 350℃within the grains.The activation energy of the dissolution reaction of theβphase(Mg_(17)Al_(12))under non-isothermal conditions is 116.781 kJ/mol,while it is 129.7383 kJ/mol under isothermal conditions.The Avrami coefficient,n,relevant for the dissolution kinetics of theβphase(Mg_(17)Al_(12))is 1.152 and 1.211 in the non-isothermal and isothermal conditions respectively.The numerical coefficients m and Avrami n are 0.993 and 1.152.
基金the financial supports from the National Natural Science Foundation of China(Nos.52171099,52105140,51301025)the Natural Science Foundation of Hunan Province,China(No.2021JJ40583)+2 种基金the Natural Science Foundation of Changsha City,China(No.kq2014096)the Open Research Fund of Science and Technology Innovation Platform of Key Laboratory of Efficient&Clean Energy Utilization,Education Department of Hunan Province,China(No.2018NGQ004)the Innovation Program for Postgraduate of Changsha University of Science and Technology,China(No.SJCX202166)。
基金supported by the National Natural Science Foundation of China(No.52071035)Guangdong Major Project of Basic and Applied Basic Research,China(No.2020B0301030006)。
