Discovering Cathodic Biocompatibility for Aqueous Zn–MnO_(2) Battery:An Integrating Biomass Carbon Strategy

Developing high-performance aqueous Zn-ion batteries from sustainable biomass becomes increasingly vital for large-scale energy storage in the foreseeable future.Therefore,γ-MnO_(2) uniformly loaded on N-doped carbon derived from grapefruit peel is successfully fabricated in this work,and particularly the composite cathode with carbon carrier quality percentage of 20 wt%delivers the specific capacity of 391.2 mAh g^(−1)at 0.1 A g^(−1),outstanding cyclic stability of 92.17%after 3000 cycles at 5 A g^(−1),and remarkable energy density of 553.12 Wh kg^(−1) together with superior coulombic efficiency of~100%.Additionally,the cathodic biosafety is further explored specifically through in vitro cell toxicity experiments,which verifies its tremendous potential in the application of clinical medicine.Besides,Zinc ion energy storage mechanism of the cathode is mainly discussed from the aspects of Jahn–Teller effect and Mn domains distribution combined with theoretical analysis and experimental data.Thus,a novel perspective of the conversion from biomass waste to biocompatible Mn-based cathode is successfully developed.

Degradation and biocompatibility of one-step electrodeposited magnesium thioctic acid/magnesium hydroxide hybrid coatings on ZE21B alloys for cardiovascular stents

Constructing a functional hybrid coating appears to be a promising strategy for addressing the poor corrosion resistance and insufficient endothelialization of Mg-based stents.Nevertheless,the steps for preparing composite coatings are usually complicated and time-consuming.Herein,a novel composite coating,composed of bioactive magnesium thioctic acid(MTA)layer formed by deposition and corrosion-resistant magnesium hydroxide(Mg(OH)_(2))layer grown in situ,is simply fabricated on ZE21B alloys via one-step electrodeposition.Scanning electron microscopy(SEM)shows that the electrodeposited coating has a compact and uniform structure.And the high adhesion of the MTA/Mg(OH)_(2)hybrid coating is also confirmed by the micro-scratch test.Electrochemical test,scanning kelvin probe(SKP),and hydrogen evolution measurement indicate that the hybrid coating effectively reduces the degradation rate of Mg substrates.Haemocompatibility experiment and cell culture trial detect that the composite coating is of fine biocompatibility.Finally,the preparation mechanism of MTA/Mg(OH)_(2)hybrid coatings is discussed and proposed.This coating shows a great potential application for cardiovascular stents.

The influence of yttrium and manganese additions on the degradation and biocompatibility of magnesium-zinc-based alloys:In vitro and in vivo studies

The repair and regeneration of bone defects are highly challenging orthopedic problems.Recently,Mg-based implants have gained popularity due to their unique biodegradation and elastic modulus similar to that of human bone.The aim of our study is to develop a magnesium alloy with a controllable degradation that can closely match bone tissue to help injuries heal in vivo and avoid cytotoxicity caused by a sudden increase in ion concentration.In this study,we prepared and modified Mg-3Zn,Mg-3Zn-1Y,and Mg-2Zn-1Mn by hot extrusion,and used Mg-2.5Y-2.5Nd was as a control.We then investigated the effect of additions of Y and Mn on alloys'properties.Our results show that Mn and Y can improve not only compression strength but also corrosion resistance.The alloy Mg-2Zn-1Mn demonstrated good cytocompatibility in vitro,and for this reason we selected it for implantation in vivo.The degraded Mg-2Zn-1Mn implanted a bone defect area did not cause obvious rejection and inflammatory reaction,and the degradation products left no signs of damage to the heart,liver,kidney,or brain.Furthermore,we find that Mg-2Zn-1Mn can promote an osteoinductive response in vivo and the formation of bone regeneration.

Enhancing the anti-corrosion performance and biocompatibility of AZ91D Mg alloy by applying roughness pretreatment and coating with in-situ Mg(OH)_(2)/Mg-Al LDH

Corrosion-resistant and biocompatible films were fabricated on AZ91D Mg alloy substrates by varying their roughness levels using met-allographic preparation and subsequent hydrothermal procedures.The coated films comprised a mixed structure of Mg(OH)_(2)and Mg-Al layered double hydroxides(LDH)and exhibited excellent compactness.Coating film thickness increased with decreasing surface roughness.Corrosion resistance was evaluated using potentiodynamic polarization and electrochemical impedance spectroscopy.Metallographic pretreat-ment influenced the chemical activity of the Mg alloy surface and helped modulate the dissolution rate of the Mg_(17)Al_(12)phase during the hydrothermal procedure.With decreasing roughness of the Mg substrate,the Al^(3+)concentration gradually increased,accelerating the in-situ formation of the Mg(OH)_(2)/LDH composite coating and improving its crystallinity.A thick and dense Mg(OH)_(2)/LDH coating was synthesized on the Mg substrate with the least roughness,substantially improving the corrosion resistance of the AZ91D alloy.The lowest corrosion current density((5.73±2.75)×10^(−8)A·cm^(−2))was achieved,which was approximately three orders of magnitude less than that of bare AZ91D.Moreover,the coating demonstrated biocompatibility with no evident cytotoxicity,cellular damage,and hemolytic phenomena.This study provides an effective method for preparing coatings on Mg alloy surfaces with excellent corrosion resistance and biocompatibility.

Biocompatibility of light responsive materials prepared for accommodative intraocular lenses manufacturing

AIM:To investigate the biocompatibility and bacterial adhesion properties of light responsive materials(LRM)and analyze the feasibility and biosafety of employing LRM in the preparation of accommodative intraocular lenses(AIOLs).METHODS:Employing fundamental experimental research techniques,LRM with human lens epithelial cells(hLECs)and human retinal pigment epithelium cells(ARPE-19 cells)were co-cultured.Commercially available intraocular lenses(IOLs)were used as controls to perform cell counting kit-8(CCK-8),cell staining under varying light intensities,cell adhesion and bacterial adhesion experiments.RESULTS:LRM exhibited a stronger inhibitory effect on the proliferation of ARPE19 cells than commercially available IOLs when co-cultured with the undiluted extract for 96h(P<0.05).Under other culturing conditions,the effects on the proliferation of hLECs and ARPE-19 cells were not significantly different between the two materials.Under the influence of light irradiation at intensities of 200 and 300 mW/cm^(2),LRM demonstrated a markedly higher inhibitory effect on the survival of hLECs compared to commercially available IOLs(P<0.0001).They also showed a stronger suppressive effect on the survival rate of ARPE-19 cells,with significant differences observed at 200 mW/cm^(2)(P<0.001)and extremely significant differences at 300 mW/cm^(2)(P<0.0001).Additionally,compared to commercially available IOLs,LRM had a higher number of cells adhering to their surface(P<0.05),as well as a significantly greater number of adherent bacterium(P<0.0001).CONCLUSION:LRM,characterized by their excellent non-contact tunable deformability and low cytotoxicity to ocular tissues,show considerable potential for use in the fabrication of AIOLs.These materials demonstrate strong cell adhesion;however,during photothermal conversion processes involving shape deformation under various light intensities,the resultant temperature rise may harm surrounding cells.These factors suggest that while the material plays a positive role in reducing the incidence of posterior capsule opacification(PCO),it also poses potential risks for retinal damage.Additionally,the strong bacterial adhesion of these materials indicates an increased risk of endophthalmitis.

In vitro corrosion and biocompatibility of phosphating modified WE43 magnesium alloy

Phospahting coated WE43 magnesium alloy was prepared by an immersion method. The microstructure, corrosion resistance and biocompatibility of the coated alloy were investigated. Scanning electron microscopy （SEM） and X-ray diffraction （XRD） were used to examine the microstructure and the composition of the coated alloy. The corrosion resistance was studied by means of potentiodynamic polarization method and the biocompatibility of the surface modified WE43 alloy was evaluated by （3-（4,5）-Dimethylthiazol-2, yl）-2,5-diphenyltetrazolium bromide （MTT） and hemolysis test. The results show that the phosphating coating can enhance the corrosion resistance of WE43 alloy and can be a good candidate to increase the biocompatibility of WE43 alloy.

Effects of chitosan coating on biocompatibility of Mg-6%Zn-10%Ca_3(PO_4)_2 implant

A Mg?6%Zn?10%Ca3(PO4)2 composite with a chitosan coating was prepared to study its in vivo biodegradation properties. The chitosan dissolved in a 0.2% acetic acid solution was applied on the surface of Mg?6%Zn?10%Ca3(PO4)2 composite specimens and solidified at 60 °C for 30 min to form the coating. The cytotoxicity evaluation of chitosan coated specimens is at level 0, which indicates that such coating is safe for cellular applications. The in vivotests of chitosan coated composite show that the concentration of metal ions from the composite measured in the venous blood of Zelanian rabbits is less than that from the uncoated composite specimens. The chitosan coating impedes the in vivo degradation of the composite after surgery. The in vivo testing also indicates that the chitosan coated composite is harmless to important visceral organs, including the heart, kidneys and liver of the rabbits. The new bone formation surrounding the chitosan coated composite implant shows that the composite improves the concrescence of the bone tissues. And the chitosan coating is an effective corrosion resistant layer that reduces the hydrogen release of the implant composite, thereby decreasing the subcutaneous gas bubbles formed.

Establishment of an untransfected human corneal epithelial cell line and its biocompatibility with denuded amniotic membrane

AIM: To establish an untransfected human corneal epithelial (HCEP) cell line and characterize its biocompatibility with denuded amniotic membrane (dAM). METHODS: The torn HCEP pieces were primarily cultured in DMEM/F12 media (pH 7.2) supplemented with 20% fetal bovine serum and other necessary factors, yielding an HCEP cell line which was its growth performance, chromosome morphology, tumorigenicity and expression of marker proteins analyzed. In addition, the biocompatibility of HCEP cells with dAM was evaluated through histological and immunocytochemistry analyses and with light, electron and slit-lamp microscopies. RESULTS: HCEP cells proliferated to confluence in 3 weeks, which have been subcultured to passage 160. A continuous untransfected HCEP cell line, designated as utHCEPC01, was established with a population doubling time of 45.42 hours as was determined at passage 100. The cells retained HCEP cell properties as were approved by chromosomal morphology and the expression of keratin 3. They, with no tumorigenicity, formed a multilayer epithelium-like structure on dAMs through proliferation and differentiation during air-liquid interface culture, maintained expression of marker proteins including keratin 3 and integrin p 1 and attached tightly to dAMs. The reconstructed HCEP was highly transparent and morphologically and structurally similar to the original. CONCLUSION: An untransfected and non-tumorigenic HCEP cell line was established in this study. The cells maintained expression of marker proteins. The cell line was biocompatible with dAM. It holds the potential of being used for in vitro reconstruction of tissue-engineered HCEP, promising for the treatment of diseases caused by corneal epithelial disorders.

Study of the degradation behavior and the biocompatibility of Mg-0.8Ca alloy for orthopedic implant applications

Mg-Ca alloys have recently attracted great attention towards the research in the field of orthopedic biodegradable implants.This study presents an in vitro degradation assessment of Mg-0.8Ca(0.8 wt.%of Ca)alloy in Hank’s balanced salt solution(HBSS).Immersion,hydrogen evolution and electrochemical behavior was studied as well as the cytotoxicity of the degradation products.Morphology and phase composition of the corrosion products were studied using SEM,EDX and XRD techniques.Degradation in HBSS resulted in the formation of the needle-shaped carbonated hydroxyapatite which was similar to the biological apatite in the human bone.Degradation kinetics showed that Mg-0.8Ca alloy had approximately 3-fold faster degradation rate than the pure Mg(1.08±0.38 mm/year for Mg-0.8Ca and 0.35±0.17 mm/year for pure Mg),as observed in two independent experiments.Both,pure Mg and Mg-0.8Ca alloy were biocompatible,generating no cytotoxic degradation products against human-derived HEK 293 cells.Thus,the Mg-0.8Ca alloy was found to be a promising biodegradable implant in terms of bioactivity and compatibility with human cell lines.Depending on the application of the implant and the estimated healing time of the bone,the desired degradation rate of an implant can be controlled by the Mg-Ca composition of such alloys.

Electropolishing of NiTi for Improving Biocompatibility

A modified electrolyte （CH3COOH-HClO4-A-B） for electropolishing （EP） of NiTi was presented for improving the corrosion resistance and biocompatibility of the alloy. Using the proposed parameters, a homogeneous and uniform surface was obtained. Atomic force microscopy （AFM） revealed that the surface roughness （Ra） for EP sample （23.21 nm） was close to mechanical polishing （MP） sample （19.36 nm）. Analysis by X-ray photoelectron spectroscopy （XPS） showed that Ti/Ni ratio increased from 3.1 for MP sample to 27.6 for EP sample. Measurements using potentiodynamic polarization in Hanks＇ solution showed that no pitting occurred for EP sample even though the applied potential increased up to 1500 mV （vs SCE）, while the MP sample was broken down at 650 mV. The present study indicates that electropolishing NiTi with this modified electrolyte contributes to the improved biocompatibility of NiTi.

Establishment of an untransfected human corneal stromal cell line and its biocompatibility to acellular porcine corneal stroma

AIM: To establish an untransfected human corneal stromal (HCS) cell line and characterize its biocompatibility to acellular porcine corneal stoma (aPCS). METHODS: Primary culture was initiated with a pure population of HCS cells in DMEM/F12 media (pH 7.2) containing 20% fetal bovine serum and various necessary growth factors. The established cell line was characterized by growth property, chromosome analysis, tumorigenicity assay, expression of marker proteins and functional proteins. Furthermore, the biocompatibility of HCS cells with aPCS was examined through histological and immunocytochemistry analyses and with light, electron microscopies. RESULTS: HCS cells proliferated to confluence 2 weeks later in primary culture and have been subcultured to passage 140 so far. A continuous untransfected HCS cell line with a population doubling time of 41.44 hours at passage 80 has been determined. Results of chromosome analysis, morphology, combined with the results of expression of marker protein and functional proteins suggested that the cells retained HCS cell properties. Furthermore, HCS cells have no tumorigenicity, and with excellent biocompatibility to aPCS. CONCLUSION: An untransfected and non-tumorigenic HCS cell line has been established, and the cells maintained positive expression of marker proteins and functional proteins. The cell line, with excellent biocompatibility to aPCS, might be used for in vitroreconstruction of tissue-engineered HCS.

A review on biocompatibility nature of hydrogels with 3D printing techniques,tissue engineering application and its future prospective

Recently,tissue engineering (TE)is one of the fast growing research fields due the accessibility of extra-molecular matrix (ECM)at cellular and molecular level with valuable potential prospective of hydrogels.The enhancement in the production of hydrogel-based cellular scaffolds with the structural composition of ECM has been accelerated with involvement of rapid prototyping techniques.Basically,the recreation of ECM has been derived from naturally existed or synthetic hydrogelbased polymers.The rapid utilization of hydrogels in TE puts forward the scope of bioprinfing for the fabrication of the functional biological tissues,cartilage,skin and artificial organs.The main focus of the researchers is on biofabrication of the biomaterials with maintaining the biocompatibility,biodegradability and increasing growth efficiency.In this review, biological development in the structure and cross-linking connections of natural or synthetic hydrogels are discussed.The methods and design criteria that influence the chemical and mechanical properties and interaction of seeding cells before and after the implantations are also demonstrated.The methodology of bioprinting techniques along with recent development has also been reviewed.In the end,some capabilities and shortcomings are pointed out for further development of hydrogels-based scaffolds and selection of bioprinting technology depending on their application.

Biocompatibility of vascular stents manufactured using metal injection molding in animal experiments

This study aimed to evaluate the feasibility and safety of a novel stent manufactured by metal injection molding(MIM)in clinical practice through animal experiments.Vessel stents were prepared using powder injection molding technology to considerably improve material utilization.The influence of MIM carbon impurity variation on the mechanical properties and corrosion resistance of 316L stainless steel was studied.In vitro cytotoxicity and animal transplantation tests were also carried out to evaluate the safety of MIM stents.The results showed that the performance of 316L stainless steel was very sensitive to the carbon content.Carbon fluctuations should be precisely controlled during MIM.All MIM stents were successfully implanted into the aortas of the dogs,and the MIM 316L stents had no significant cytotoxicity.The novel intravascular stent manufactured using MIM can maintain a stable form and structure with fast endothelialization of the luminal surface of the stent and ensure long-term patency in an animal model.The novel intravascular stent manufactured using MIM demonstrates favorable structural,physical,and chemical stability,as well as biocompatibility,offering promising application in clinical practice.

Study on the optical property and biocompatibility of a tissue engineering cornea

AIM: To study the optical property and biocompatibility of a tissue engineering cornea. METHODS: The cross-linker of N- (3-Dimethylaminoropyl)-N'ethylcarbodiimide hydrochloride (EDC)/ N-Hydroxysuccinimide (NHS) was mixed with Type I collagen at 10% (weight/volume). The final solution was molded to the shape of a corneal contact lens. The collagen concentrations of 10%, 12.5%, 15%, 17.5% and 20% artificial corneas were tested by UV/vis-spectroscopy for their transparency compared with normal rat cornea. 10-0 sutures were knotted on the edges of substitute to measure the corneal buttons's mechanical properties. Normal rat corneal tissue primary culture on the collagen scaffold was observed in 4 weeks. Histopathologic examinations were performed after 4 weeks of in vitro culturing. RESULTS: The collagen scaffold appearance was similar to that of soft contact lens. With the increase of collagen concentration, the transparency of artificial corneal buttons was diminished, but the toughness of the scaffold was enhanced. The scaffold transparency in the 10% concentration collagen group resembled normal rat cornea. To knot and embed the scaffold under the microscope, 20% concentration collagen group was more effective during implantation than lower concentrations of collagen group. In the first 3 weeks, corneal cell proliferation was highly active. The shapes of cells that grew on the substitute had no significant difference when compared with the cells before they were moved to the scaffold. However, on the fortieth day, most cells detached from the scaffold and died. Histopathologic examination of the primary culture scaffold revealed well grown corneal cells tightly attached to the scaffold in the former culturing. CONCLUSION: Collagen scaffold can be molded to the shape of soft contact corneal lens with NHS/EDC. The biological stability and biocompatibility of collagen from animal species may be used as material in preparing to engineer artificial corneal scaffold.

In vitro biodegradability and biocompatibility of porous Mg-Zn scaffolds coated with nano hydroxyapatite via pulse electrodeposition

The biodegradability and biocompatibility of porous Mg-2Zn（mass fraction, %） scaffolds coated with nano hydroxyapatite（HAP） were investigated. The nano HAP coating on Mg-2Zn scaffolds was prepared by the pulse electrodeposition method. The as-deposited scaffolds were then post-treated with alkaline solution to improve the biodegradation behavior and biocompatibility for implant applications. The microstructure and composition of scaffold and nano HAP coating, as well as their degradation and cytotoxicity behavior in simulated body fluid（SBF） were investigated. The post-treated coating is composed of needle-like HAP with the diameter less than 100 nm developed almost perpendicularly to the substrate, which exhibits a similar composition to natural bone. It is found that the products of immersion in SBF are identified to be HAP,（Ca,Mg）3（PO4）2 and Mg（OH）2. The bioactivity, biocompatibility and cell viabilities for the as-coated and post-treated scaffold extracts are higher than those for the uncoated scaffold. MG63 cells are found to adhere and proliferate on the surface of the as-coated and post-treated scaffolds, making it a promising choice for medical application. The results show that the pulse electrodeposition of nano HAP coating and alkaline treatment is a useful approach to improve the biodegradability and bioactivity of porous Mg-Zn scaffolds.

In vitro biocompatibility of three chitosan/polycation composite materials for nerve regeneration

BACKGROUND：It has been reported that chitosan nerve conduits could support axon elongation and improve relevant function during in vivo nerve regeneration. OBJECTIVE： To investigate in vitro biocompatibility of three novel, chitosan/polycation composite materials for nerve regeneration in cultured mouse Schwann cells and PC12 cells. DESIGN, TIME AND SETTING： The observational, control experiments for nerve tissue engineering were performed at the Department of Biological Sciences and Biotechnology of Tsinghua University from August 2007 to January 2008. MATERIALS： Mouse Schwann cells were isolated from the sciatic nerve of 5–7-day-old BALB/C mice. PC12 cells were purchased from the American Type Culture Collection （ATCC, USA）. Chitosan was purchased from Tsingdao Haisheng Co., China. Poly-L-lysine hydrochloride （PLL）, polyethyleneimine （PEI） poly-L-ornithine hydrobromide （POR）, and S-100 antibody was purchased from Sigma Chemical Co., USA. Cell Counting Kit-8 （CCK-8） was purchased from Dojindo Chemical Co., Japan. METHODS： Three chitosan/polycation composite materials for nerve regeneration （PLL-0.25, PEI-0.25, and POR-0.25） were produced by blending chitosan with 0.25% （w/w） poly-L-lysine, polyethyleneimine, and poly-L-ornithine. Pure chitosan was utilized as the control. After 3 days of culture, the morphology of mouse Schwann and PC12 cells cultured on all substrates was observed with an inverted phase contrast microscope. Mouse Schwann cells were stained by immunofluorescence labeling S-100 protein and nuclei, followed by identification with a confocal laser-scanning microscope. The amount of proliferating mouse Schwann and PC12 cells was determined by CCK-8 after 1, 3, and 5 days in culture. The level of PC12 cell differentiation on all substrates was assessed by measuring neurite length at 1, 3, and 5 days after seeding. MAIN OUTCOME MEASURES： Morphology and amount of proliferation of mouse Schwann cells and PC12 cells cultured on chitosan and three polycation-modified materials, as well as amount of differentiation in PC12 cells on these substrates. RESULTS： （1） Morphology of mouse Schwann cells and PC12 cells on all substrates： after 3 days in culture on three different chitosan/polycation composite substrates, Schwann cells were connected to each other and exhibited greater proliferation, compared to the chitosan control. In particular, on PLL-0.25 and POR-0.25 substrates, some cells congregated and nearly reached confluence. The PC12 cells on chitosan substrate, after 3 days in culture, maintained a round shape; few exhibited a bipolar shape and began to form neurite extensions. However, on PLL-0.25 and POR-0.25 substrates, most PC12 cells displayed a bipolar shape with obvious neurite outgrowth, and almost grew as an adherent, spreading monolayer. （2） Proliferation of mouse Schwann cells and PC12 cells on all substrates： on the first day, Schwann cell proliferation on the three composite substrates was significantly greater than the cells on chitosan control （P 〈 0.01）. After 3 and 5 days in culture, PLL-0.25 and POR-0.25 substrates resulted in greater cell proliferation when compared to pure chitosan （P 〈 0.01）. On the third and fifth day in culture PC12 cell proliferation on PLL-0.25 and POR-0.25 was significantly greater than on chitosan substrate （P 〈 0.01）. （3） Differentiation of PC12 cells on all substrates： at all time points, the average neurite length of cells cultured on composite materials was significantly longer than on chitosan control （P 〈 0.05-0.01）. Cells on PLL-0.25 exhibited the longest average neurite length at days 3 and 5. CONCLUSION： Mouse Schwann cells and PC12 cells exhibit in vitro biocompatibility with poly-L-lysine-and poly-L-ornithine-modified substrates, which indicates that these substrates could serve as suitable substrates for peripheral nerve regeneration.

Biocompatibility Evaluation of Vessel Extracellular Matrix as a Matrix for Urethral Reconstruction

The objective of this study was to evaluate the biocompatibility of vessel extracellular matrix （VECM） from rabbit and to discuss the feasibility of vessel extracellular matrix as a matrix for urethral reconstruction. Primary cultured bladder smooth muscle cells isolated from New Zealand rabbits were implanted on VECM .The effects of VECM on rabbit bladder smooth muscle cells （RBSMCs） metabolic activity, attachment, proliferation were monitored in vitro with the aid of an inverted light microscope and a scanning electron microscope. The cell viability was monitored by MTT（methythiazolye tetrazolium bromide） after 1, 3, 5 days seeding. The in vivo tissue response to VECM was investigated by implanting them into the subcutaneous of rabbits. VECM exhibited a nontoxic and bioactive effect on RBSMCs. RBSMCs could be attached to and proliferated on VECM and maintained their morphologies. MTT assay showed RBSMCs cultured with the extracts of VECM were not significantly different from those of negative controls. In vivo, VECM demonstrated a favorable tissue compatibility without tissue necrosis, fibrosis and other abnormal response. VECM exhibited nontoxic and bioactive effects on RBSMC. It is a suitable material for urethral reconstruction.

Enhanced Biocompatibility and Osseointegration of Calcium Titanate Coating on Titanium Screws in Rabbit Femur

This study aimed to examine the biocompatibility of calcium titanate(CaTiO3) coating prepared by a simplified technique in an attempt to assess the potential of CaTiO3coating as an alternative to current implant coating materials. CaTiO3-coated titanium screws were implanted with hydroxyapatite(HA)-coated or uncoated titanium screws into medial and lateral femoral condyles of 48 New Zealand white rabbits. Imaging, histomorphometric and biomechanical analyses were employed to evaluate the osseointegration and biocompatibility 12 weeks after the implantation. Histology and scanning electron microscopy revealed that bone tissues surrounding the screws coated with CaTiO3were fully regenerated and they were also well integrated with the screws. An interfacial fibrous membrane layer, which was found in the HA coating group, was not noticeable between the bone tissues and CaTiO3-coated screws. X-ray imaging analysis showed in the CaTiO3coating group, there was a dense and tight binding between implants and the bone tissues; no radiation translucent zone was found surrounding the implants as well as no detachment of the coating and femoral condyle fracture. In contrast, uncoated screws exhibited a fibrous membrane layer, as evidenced by the detection of a radiation translucent zone between the implants and the bone tissues. Additionally, biomechanical testing revealed that the binding strength of CaTiO3coating with bone tissues was significantly higher than that of uncoated titanium screws, and was comparable to that of HA coating. The study demonstrated that CaTiO3coating in situ to titanium screws possesses great biocompatibility and osseointegration comparable to HA coating.

Effect of chitosan/type I collagen/gelatin composites in biocompatibility and nerve repair

Chitosan, collagen I and gelatin were mixed in appropriate quantities to develop a new nerve repair material, with good arrangement and structure, as well as even aperture size. The composite material was sterilized by 60Co irradiation for 24 hours prior to implantation in the right thigh of rats following sciatic nerve damage. Results showed that the material was nontoxic to the kidneys and the liver, and did not induce an inflammatory response in the muscles. The composite material enhanced the recovery of sciatic nerve damage in rats. These experimental findings indicate that the composite material offers good biocompatibility and has a positive effect on injured nerve rehabilitation.

Preparation of functional coating on magnesium alloy with hydrophilic polymers and bioactive peptides for improved corrosion resistance and biocompatibility

Biodegradable magnesium alloy stents(MAS)have great potential in the treatment of cardiovascular diseases.However,too fast degradation and the poor biocompatibility are still two key problems for the clinical utility of MAS.In the present work,a functional coating composed of hydrophilic polymers and bioactive peptides was constructed on magnesium alloy to improve its corrosion resistance and biocompatibility in vitro and in vivo.Mg-Zn-Y-Nd(ZE21B)alloy modified with the functional coating exhibited moderate surface hydrophilicity and enhanced corrosion resistance.The favourable hemocompatibility of ZE21B alloy with the functional coating was confirmed by the in vitro blood experiments.Moreover,the modified ZE21B alloy could selectively promote the adhesion,proliferation,and migration of endothelial cells(ECs),but suppress these behaviors of smooth muscle cells(SMCs).Furthermore,the modified ZE21B alloy wires could alleviate intimal hyperplasia,enhance corrosion resistance and re-endothelialization in vivo transplantation experiment.These results collectively demonstrated that the functional coating improved the corrosion resistance and biocompatibility of ZE21B alloy.This functional coating provides new insight into the design and development of novel biodegradable stents for biomedical engineering.