Improved combustion stability of biogas at different CO_(2) concentrations using inhomogeneous partially premixed stratified flames

Biogas is a renewable and clean energy source that plays an important role in the current environment of lowcarbon transition.If high-content CO_(2) in biogas can be separated,transformed,and utilized,it not only realizes high-value utilization of biogas but also promotes carbon reduction in the biogas field.To improve the combustion stability of biogas,an inhomogeneous,partially premixed stratified(IPPS)combustion model was adopted in this study.The thermal flame structure and stability were investigated for a wide range of mixture inhomogeneities,turbulence levels,CO_(2) concentrations,air-to-fuel velocity ratios,and combustion energies in a concentric flow slot burner(CFSB).A fine-wire thermocouple is used to resolve the thermal flame structure.The flame size was reduced by increasing the CO_(2) concentration and the flames became lighter blue.The flame temperature also decreased with increase in CO_(2) concentration.Flame stability was reduced by increasing the CO_(2) concentration.However,at a certain level of mixture inhomogeneity,the concentration of CO_(2) in the IPPS mode did not affect the stability.Accordingly,the IPPS mode of combustion should be suitable for the combustion and stabilization of biogas.This should support the design of highly stabilized biogas turbulent flames independent of CO_(2) concentration.The data show that the lower stability conditions are partially due to the change in fuel combustion energy,which is characterized by the Wobbe index(WI).In addition,at a certain level of mixture inhomogeneity,the effect of the WI on flame stability becomes dominant.

Numerical Simulation of Turbulent Diffusion Flames of a Biogas Enriched with Hydrogen

Any biogas produced by the anaerobic fermentation of organic materials has the advantage of being an environmentally friendly biofuel.Nevertheless,the relatively low calorific value of such gases makes their effective utilization in practical applications relatively difficult.The present study considers the addition of hydrogen as a potential solution to mitigate this issue.In particular,the properties of turbulent diffusion jet flames and the related pollutant emissions are investigated numerically for different operating pressures.The related numerical simulations are conducted by solving the RANS equations in the frame of the Reynolds Stress Model in combination with the flamelet approach.Radiation effects are also taken into account and the combustion kinetics are described via the GRI-Mech 3.0 reaction model.The considered hydrogen fuel enrichment spans the range from 0%to 50%in terms of volume.Pressure varies between 1 and 10 atm.The results show that both hydrogen addition and pressure increase lead to an improvement in terms of mixing quality and have a significant effect on flame temperature and height.They also reduce CO_(2) emissions but increase NOx production.Prompt NO is shown to be the predominant NO formation mechanism.

Application of 9-component S-wave 3D seismic data to study sedimentary facies and reservoirs in a biogasbearing area:A case study on the Pleistocene Qigequan Formation in Taidong area,Sanhu Depression,Qaidam Basin,NW China

To solve the problems in restoring sedimentary facies and predicting reservoirs in loose gas-bearing sediment,based on seismic sedimentologic analysis of the first 9-component S-wave 3D seismic dataset of China,a fourth-order isochronous stratigraphic framework was set up and then sedimentary facies and reservoirs in the Pleistocene Qigequan Formation in Taidong area of Qaidam Basin were studied by seismic geomorphology and seismic lithology.The study method and thought are as following.Firstly,techniques of phase rotation,frequency decomposition and fusion,and stratal slicing were applied to the 9-component S-wave seismic data to restore sedimentary facies of major marker beds based on sedimentary models reflected by satellite images.Then,techniques of seismic attribute extraction,principal component analysis,and random fitting were applied to calculate the reservoir thickness and physical parameters of a key sandbody,and the results are satisfactory and confirmed by blind testing wells.Study results reveal that the dominant sedimentary facies in the Qigequan Formation within the study area are delta front and shallow lake.The RGB fused slices indicate that there are two cycles with three sets of underwater distributary channel systems in one period.Among them,sandstones in the distributary channels of middle-low Qigequan Formation are thick and broad with superior physical properties,which are favorable reservoirs.The reservoir permeability is also affected by diagenesis.Distributary channel sandstone reservoirs extend further to the west of Sebei-1 gas field,which provides a basis to expand exploration to the western peripheral area.

A Biogas Production Model from the Combination of Pig Manure and Cow Dung in N’Zérékoré City, Republic of Guine

This present research work focuses on the valorization of pig droppings for production of biogas in mono digestion and co-digestion with proportions of cow dung from the urban commune of N’Zérékoré. It was carried out in December 2020 in the Physics laboratory of the University of N’Zérékoré. The anaerobic digestion process took 25 days in an almost constant ambient temperature of 25˚C. Five digesters were loaded on 12/06/2020, two of which with 1 kg of pig dung and 1 kg of cow dung both in mono-digestion. The 3 other digesters in co-digestion with different proportions of pig manure and cow dung. The substrate in each digester is diluted in 2 liters of water, with a proportion of (1/2). The main results obtained are: 1) the evolution of the temperature and pH during digestion process, 2) the average biogas productions 0.61 liters for (D1);1.20 liter for (D2);1.65 liter for (D3);1.51 liter for (D4) and 1.31 liter for (D5). The cumulative amounts of biogas are respectively: D1 (7.95 liters), D2 (15.60 liters), D3 (21.50 liters), D4 (19.65 liters) and D5 (17.05 liters). The total cumulative production is 81.75 liters at the end of the process. The originality of this research work is that the proposed model examines the relation between the daily biogas production and the variation of temperature, pH and pressure. The combustibility test showed the biogas produced during the first week was no combustible (contains less than 50% methane). Combustion started from the biogas produced from the 15th day and it is from the 20th day that a significant amount of stable yellow/blue flame was observed. The results of this study show the combination of pig manure and cow dung presents advantages for optimal biogas production.

Performance of a Combined Energy System Consisting of Solar Collector, Biogas Dry Reforming and Solid Oxide Fuel Cell: An Indian Case Study

An energy production system consisting of a solar collector, biogas dry reforming reactor and solid oxide fuel cell (SOFC) was assumed to be installed in Kolkata, India. This study aims to understand the impact of climate conditions on the performance of solar collectors with different lengths of parabolic trough solar collector (dx) and mass flow rate of heat transfer fluid (m). In addition, this study has evaluated the amount of H2 produced by biogas dry reforming (GH2), the amount of power generated by SOFC (PSOFC) and the maximum number of possible households (N) whose electricity demand could be met by the energy system proposed, considering the performance of solar collector with the different dx and m. As a result, the optimum dx was found to be 4 m. This study revealed that the temperature of heat transfer fluid (Tfb) decreased with the increase in m. Tfb in March, April and May was higher than that in other months, while Tfb from June to December was the lowest. GH2, PSOFC and N in March, April and May were higher than those in other months, irrespective of m. The optimum m was 0.030 kg/s.

Influence of Leachate Recirculation on Landfill Degradation and Biogas Production

Population growth combined with the rising standard of living of people around the world is the reason for the ever-increasing production of waste which management is costing states a lot of money for its disposal. Among available waste treatment techniques, landfill is one of the most promoted waste management techniques with the emergence of the bioreactor concept. However, the control of biodegradation parameters in order to accelerate waste stabilization is an important issue. For environmental and economic reasons, the technique of leachate recirculation by injection into the waste is increasingly used to improve the degradation of landfilled waste. The injection of leachate is possible using vertical boreholes, horizontal pipes, infiltration ponds or a combination of these. Indeed, moisture is the main factor in waste degradation and biogas production. The migration of leachate to the bottom of the landfill creates low moisture in the upper areas of the landfill reducing the growth of microbial populations. This results in low or no biogas production. The main objective of the present work is to develop a numerical model of leachate recirculation by injection into the waste to rewet the waste and restart biological activity. The analysis of the results shows that the diffusion of the wet front increases with time and depth. The lateral widening of the wet front is slow in relation to the progression of the wet front towards the bottom of the waste cell. This indicates the predominance of gravity effects over diffusion phenomena. The results reveal that the distributed re-injection is the best mode of leachate recirculation because the moisture distribution on the whole waste mass is totally satisfactory and the biogas generation is more important. Leachate recirculation campaigns should be done periodically to rewet the waste, boost microbial activity and hope for a quicker stabilization of the landfill.

Kinetics and Process Studies of the Potential for Transformation of Biogas to Biomethane and Liquefaction using Cryogenic Liquid for Domestic Applications

The present work dealt with the generation, purifying and liquefaction of biomethane to improve energy density using local materials for domestic applications. Cow dung was sourced at JKUAT dairy farm and experiments were conducted at JKUAT Bioenergy laboratory using biogas generated in laboratory scale 1 m3 bioreactors. Experiments were done in triplicates and repeated under different conditions to get the optimal conditions. The results showed that enhanced cow dung substrate displayed an improved fermentation process with increased biogas yields. Purified biogas optimized methane content from 56% ± 0.18% for raw biogas to 95% ± 0.98% for biomethane which was ideal for liquefaction.

Theoretical Analysis of Biogas Production from Septic Tanks: The Case of the City of Kinshasa

As many think that respect for the environment, is not only a question intended for industrialists but has all the sectors of life, in particular sanitary also. In this regard, our article brings alternative management of human waste (excrement) to solve the problems that plague our dear beautiful capital, namely: 1) Lack of latrines that meet the standards;2) Emptying of septic tanks directly into the gutters and;3) Water pollution by sewage csompanies. In order to carry out the cartographic analysis of the study area, we used Shapefile data from the OpenStreetMap, Diva-Gis. These different data allowed us, analyzed, to categorize with the software ArArcGIS 0.8.1 to produce different zones according to the cases incurred in the city of Kinshasa. To do this, the analytical method uses the Buswell equation to determine the amount of gas contained in human excrement. Focusing on the analysis of the excrements produced by the population of age superior to 10 years, for 2023, we obtained: 138355.7283 m3/day of CH4 (885476.66 kWh/day or 885.476 MWh/day), which, energy can light: 138,355 lamps of 60 to 100 W for six hours or nearly 70,000 lamps of 60 to 100 W for 12 hours. Considering the last one which offers the lowest access rate, i.e. 3% of the district population to these latrines, we have: a) In Tshangu, we produce: 1618.762 3>/day (10360.07 kWh/day or 10.36 MWh/day) which can light nearly 1600 lamps from 60 to 100 W for six hours or nearly 800 lamps from 60 to 100 W for twelve hours. b) Mont-Amba, we produce 1402.927 3>/day (8978.73 kWh/day or 8.97 MWh/day) which can light nearly 1400 lamps from 60 to 100 W for six hours or nearly 700 lamps from 60 to 100 W for twelve hours;c) In Lukunga, we produce: 946.35 3>/day (6056.66 kWh/day or 6.056 MWh/day) which can light nearly 900 lamps from 60 to 100 W for six hours or nearly 450 lamps from 60 to 100 W for twelve hours. d) Funa, we produce: 182.629 3>/day (1168.83 kWh/day or 1.17 MWh/day) which can light almost 180 lamps from 60 to 100 W for six hours or almost 90 lamps from 60 to 100 W for twelve hours.

Production of Biogas from Olive Mill Waste Waters Treated by Cow Manure

The olive mill waste waters (OMWW) generated from olive oil extraction is a major environmental concern since they are characterized by their role as a pollutant (high organic and mineral matters) and their pH acid. The aim of this study was to valorize (OMWW) by anaerobic fermentation in the presence of cow manure in order to produce biogas and reduce their toxic load. Many tests were carried out by fermenting (OMWW) with polyphenols in the presence of cow manure in thermophile temperatures. The performance of this treatment was valuated through measurements of biogas production and by the determination of different parameters of fermented media (pH, volume of the biogas and polyphenols).

Comparative Study of Biogas Production from Jackfruit Waste, Banana Peels, and Pineapple Peels Co-Digested with Cow Dung

Only 42% of Uganda’s population has access to electricity. The population continues to use firewood and charcoal as a source of energy, which leads to depletion of forests thus to climate change. The purpose of this study was to assess the potential of biogas production from jackfruit waste, banana peels, and pineapple peels when co-digested with cow dung as an alternative energy source. Substrates for each waste were co-digested with varying proportions (0%, 25%, and 50%) of cow dung using laboratory-scale 250 mL anaerobic digestors. The total biogas generation for jackfruit waste, banana peels, and pineapple peels after 30 days of anaerobic digestion was 82.3, 189, and 262 mL, respectively. When jack fruit waste, pineapple peels and banana peels were co-digested with 25% cow dung, the total amount of biogas produced increased by a factor of two and three, respectively. However, 50% of cow dung only significantly (p ≤ 0.05) improved for jack fruit waste by two folds. Therefore, the results indicated that jackfruit waste, banana and pineapple peels can be used for biogas production to augment energy supply. .

An Energy Production System Powered by Solar Heat with Biogas Dry Reforming Reactor and Solid Oxide Fuel Cell

In this paper, an energy system consisting of solar collector, biogas dry reforming reactor and solid oxide fuel cell (SOFC) has been proposed. The heat produced from the concentrating solar collector is used to drive a biogas dry reforming reactor in order to produce H2 as a fuel for SOFC, in such as system. The aim of this study is to clarify the impact of climate data on the performance of solar collector with various sizes/designs. The temperature of heat transfer fluid produced by the solar collector is calculated by adopting the climate data for Nagoya city in Japan in 2021. The amount of H2 produced from the biogas dry reforming reactor and the power generated by SOFC were simulated. The results show the temperature of heat transfer fluid (Tfb) and Tfb ratio (a) based on the length of absorber (dx) = 1 m have a peak near the noon following the trend of solar intensity (I). Results also revealed that a increases with increase in dx. It is found that the differences of Tfb and a between dx = 2 m and dx = 3 m are larger than those between dx = 1 m and dx = 2 m. It is revealed that Tfb and a are higher in spring and summer. dx = 4 m is the optimum length of solar absorber. The amount of H2 produced from the biogas dry reforming reactor as well as the power generated by SOFC is the highest in August, resulting that it is prefer to produce H2 and to generate SOFC in summer.

Study on Biogas Production Using Anaerobic Fermentation of Rice Straw

[Objective] The aim was to improve the biogas production rate,and improve the use ratio of rice straws to the furthest.[Method] Single-factor method was adopted to analyze the influence of inoculated amount,total solid content and carbon-nitrogen ratio on biogas production in biogas station of Nanjing University of Technology.[Result] It was found that the most optimum condition was：inoculated amount of 34%,total solid content of 6%,and carbon-nitrogen ratio of 25：1.According to the experimental verification,the total biogas yield in experimental group increased by 27.6% over the control group.[Conclusion] The research provided the reference of the further industrialization production of biogas using straw.

Application of Landfill Composed of Biogas Residue and Slurry in Cherry Production

In order to explore the effects of landfill composed of biogas residue and slurry on the improvement of soil nutrients and cherry fruit yield, three treatments： control （no landfill）, landfilling with biogas residue and water （BR）, landfilling with biogas residue and slurry （BS） were conducted in a cherry orchard. The results showed that compared with the control, soil water content around the landfills with a radius of 60 cm within 30 d was increased in BR and BS treatments. The poment- age of short shoots and the total number of shoots of cherry trees were also signif- icantly increased by BR and BS treatments; the cherry fruit yield per tree and the single-fruit weight in BS treatment were increased by 21.76% and 28.89%, respec- tively. In addition, BS treatment obviously improved the contents of soil organic matter, soil available nitrogen, s0il available phosphorus, soil available potassium and other nutrients. The positive effects of BR treatment on the improvement of soil nutrients and cherry fruit yield were lower than those of BS treatment, indicating that the combined use of biogas residue and biogas slurry as landfill can improve the soil water and fertilizer status in orchards, and thus can be promoted in the cultivation of fruit trees.

Effect of Highly Efficient Nutrient Solution of Biogas Slurry on Yield and Quality of Vegetables

[Objective] The paper aimed to study highly efficient utilization of biogas slurry and the effect of highly efficient biogas slurry on vegetables,so as to provide basis for wide and effective application of biogas slurry.[Method] Using secondary aerobic fermentation technology,a small amount of humic acid was added to biogas slurry to enhance the biological activity of biogas slurry.Through greenhouse experiment,the effect of highly efficient nutrient solution of biogas slurry on yield and quality of green pepper,tomato and cucumber was studied.[Result] Compared with control and traditional application of biogas slurry,application of highly efficient nutrient solution of biogas slurry increased the yield of green pepper,tomato and cucumber,and the increase extents were 12.4%,47.4%,19.9% and 2.7%,15.9%,9.1%,respectively.Compared with traditional application of biogas slurry,application of highly efficient nutrient solution of biogas slurry significantly increased Vc content of green pepper and cucumber with the increase extent of 16.8% and 43.8%,respectively.[Conclusion] Application of highly efficient nutrient solution of biogas slurry can effectively promote the yield of green pepper,tomato and cucumber and change the qualities of vegetables,and significantly enhance the biological activity of biogas slurry.

Security Risk Analysis on the Nutrients and Heavy Metals of Biogas Slurry in Agricultural Application

[Objective] This study was to provide scientific basis for the security application of biogas slurry in agriculture through the analysis on the security risk of nu- trients and heavy metals of biogas slurry in agricultural application. [Method] The components of the slurry produced by the anaerobic digestion of straws and manures were systematically analyzed. Different types of biogas slurry with different concentrations were used to conduct the germination test. [Result] The types and proportions of raw materials, and alkali pretreatment affected the compositions and nature of the biogas slurry. Alkali pretreatment could reduce the contents of heavy metals and improved the contents of nitrogen, phosphorous, organic matter and available components. The contents of heavy metals in the biogas slurry were as follows： Cd of 8.76 μg/kg, Cr of 52μg/kg, Pb of 210 μg/kg, Hg of 0.512 μg/kg, As of 140μg/kg, and the contents of Cu and Zn were the highest among the heavy metals, respectively, 279 and 680 μg/kg. All the contents were under the limit standards of the urban wastes for agricultural use. The germination tests of the seeds verified that the slurry with the concentration of lower than 5% could accelerate the germination, while the salt stress could inhibit the growth of seedlings in the slurry. [Conclusion] When the dung are uses as the raw materials for fermentation, appropriate control should be conducted on the feeding proportion or the heavy metals should be pre-removed; when the slurry is used as the liquid fertilizer to apply in the farmland, the dilution or desalting treatment should be conducted at first.

Effects of Crops, Soil Types and Irrigation Methods on Digestion Capacity of Biogas Slurry

In the research, pot experiment and field testing were conducted to study the effect of different crops, soil types, and irrigation modes on biogas slurry diges- tions. The results showed that when silage maize, sweet sorghum and Chinese cabbage were planted in purple soils, the quantities of digested biogas slurry were of 57, 157.5, and 34.5 t/hm2, respectively, while the quantities of digested biogas slurry were 70.5, 157.5 and 40.5 t/hm2 in yellow soils. Besides, the digested biogas slurries reached 36 and 27 t/hm2 as per flood irrigation and sprinkling irrigation when Chinese cabbages were planted in yellow soils. The research indicated crop variety, soil type, and irrigation method all have effects on farmland digestion of biogas slurry.

Design and Implementation of Biogas Plants Geographic Information System

[Objective] A kind of biogas engineering geographic information system was designed and realized.[Method] Based on the data of the investigation of the large and medium-sized biogas projects in Beijing,the system user＇s need and function demand were studied.Sub-system function was divided.By using SuperMap IS.NET,C# and SQL Server 2005 as the database and WebGIS frame,the system spatial and attribute database were designed so as to realize the WebGIS software of biogas project in Beijing.[Result] The system provided application platform for the distribution of biogas project information.User can realize the submission and inquiry the feedback of biogas project information based on system application right etc,so as to visually,fully and precisely inquiry project data.Based on the comprehensive analysis of data,the current state of biogas project and change trend were studied and decided.[Conclusion] The system provided convenience and services to relevant departments＇ planning and management of biogas project.

Design Considerations of a Flexible Biogas Digester System for Use in Rural Communities of Developing Countries

Several challenges are associated with the development, adoption and deployment of biogas digesters in developing countries. Amongst these challenges is a comprehensive and systematic procedure for the design of digesters suitable for rural communities. This paper proposes the Flexible Biogas Digester System (FBDS) as a viable option for rural communities in developing countries and provides a detailed step-by-step procedure for its design. The biogas production process is a function of the digester operating factors which may be grouped into physical, process and performance parameters. The physical design parameters include the digester volume, the volume of the biogas storage tank, and the volume of the installation pit. The process parameters include total solid content of the slurry (TS), organic loading rate (OLR), digester operating temperatures, pH of the slurry inside the digester. The performance parameters include biogas production rate, biogas productivity and biogas quality. The Net Present Value and the Levelised Cost of Energy are presented for simple economic evaluation of the FBDS.

Effects of Continuous Irrigation of Biogas Slurry on Forms and Biological Availability of Pb in Soil of a Tea Garden

Through indoor culture experiments, the effects of continuous irrigation of biogas slurry on the forms and biological availability of Pb in soil of a tea garden were studied. The results show that continuous irrigation of biogas slurry could change the forms of Pb in the soil, and exchangeable Pb, Pb bonded to iron and manganese oxides, and Pb bonded to carbonates transformed to Pb bonded to or- ganic matter and residual Pb in the soil. Among various forms of Pb in the soil, the content of residual Pb was the highest in the soil irrigated with biogas slurry contin- uously in various treatments, accounting for 54.56%, 60.00% and 60.70% in the treatments T1, T2 and T3 respectively. Compared with the CK, the application of bio- gas slurry could decrease the biological activity and biological availability of Pb in the soil obviously, and the reduction of the biological activity was 21.26%-22.83%. In a word, the application of biogas slurry in soil of the tea garden could inhibit the biological activity and biological availability of Pb.

Current Situation and Prospect Analysis of Biogas Project in Scale Farms in Chengdu

In order to implement National Sustainable Development of Agriculture 2015-2030 and supply-side reform of agriculture, and seek the way to replace chemical fertilizer by livestock and poultry manure, the animal breeding scale and the demand space for biogas project were analyzed according to the changes in farm scale and farm quantity, the present situation of livestock breeding, the biogas technical pattern and present project quantity in Chengdu. Furthermore, based on the cultivated land area in Chengdu, a principle that ＂land decides production, pro- duction decides fertilizer, and fertilizer decides livestock＂ was proposed, and a pro- gram for the livestock quantity and biogas projects in Chengdu in ＂The 13th Five- Year＂ was suggested. Suggestions were also made for government to modify the allowance standards for biogas project construction.