Minimally invasive approach for improving aesthetic in a patient with tetracycline-stained teeth by bleaching:A clinical evaluation

Objective:To compare 16% carbamide peroxide(CP)with a higher concentration of hydrogen peroxide(HP)for bleaching teeth in office or at-home to erase tetracycline stains on teeth.Materials and methods:In a randomized,self-controlled clinical trial,we assigned eligible subjects to group A with 40% HP compared with 16% CP or group B with 45% CP compared with 16% CP on the split maxillary arch and followed the manufacturers’instructions.Tooth color changes were measured with vita 3D-bleached guide and colorimeter at baseline and three-time assessment.Tooth sensitive intensity was evaluated using numeric rating scales,and oral soft and hard tissue examination was recorded.Patient satisfaction survey was conducted at the last tooth color evaluation.Results:There were 20 subjects enrolled.The color changes by the end of the study were A1(40% HP)=8.22,A2(16% CP)=8.20,B1(45% CP)=11.27,B2(16% CP)=8.26 respectively.All groups experienced significant shade reductions by bleaching,the 45% CP group had significantly greatest color changes compared with the other groups(p=0.03).For tooth sensitivity evaluation,significant differences were observed in 40% HP group(p=0.01),but with mild level.None patients suffered oral soft or hard tissue abnormalities before and after treatment.Patients were more in favor of using 45% CP according to the questionnaire results.Conclusion:The 3 whitening agents were effective and safe for the whitening of tetracycline-stained teeth,the 45% CP agent had quicker whitening efficacy with low tooth sensitivity and positive feedback.Clinical significance:45% of high-concentration CP whitener by at-home using,brought faster and superior efficacy to bleaching tetracycline-stained teeth while had the equal intensity of tooth sensitivity.

Evaluating the effectiveness of using ClO_2 bleaching as substitution of traditional Cl_2 on PCDD/F reduction in a non-wood pulp and paper mill using reeds as raw materials

The effectiveness of ClO_2 bleaching as a replacement for conventional Cl_2 bleaching,which is intensively practiced in developing countries,to reduce polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/Fs)in non-wood pulp and paper mills has not been field tested.The first field study was performed to investigate PCDD/F variations when ClO_2 bleaching was used as a substitute for conventional Cl_2 bleaching in a non-wood pulp and paper mill.It was found that the PCDD/F toxic equivalents(TEQs)in solid and effluent samples were approximately 1.3–14.9 times lower when ClO_2 bleaching was used instead of the conventional Cl_2 bleaching.2,3,7,8-Substituted tetrachlorinated dibenzofurans(2,3,7,8-TCDF)were the dominant contributors to total PCDD/F TEQs in samples from the investigated mill when using conventional Cl_2 bleaching.The formation amounts of 2,3,7,8-TCDF were reduced from 1.56–2.76 pg TEQ/g to 0.02–0.32 pg TEQ/g in solid samples when ClO_2 bleaching was used instead of the conventional Cl_2 bleaching.The replacement of Cl_2 with ClO_2 might decrease the chlorination reactions of dibenzofuran as potential precursors,and thus reduce the formation amounts of 2,3,7,8-TCDF.The results could provide important knowledge for suggesting the best available technique for PCDD/F reduction for non-wood pulp and paper mills in developing countries.

Exhibition of Bleaching Resistance Via Adaptive Bleaching Pattern by Coral Reefs of the Gulf of Mannar during Massive Bleaching Event 2019

Coral reefs in the Gulf of Mannar(GoM)and Palk Bay regions are facing potential threats from climate change,sedimentation and anthropogenic activities.Considerably,coral reefs in these two regions are highly damaged due to frequent bleaching events caused by increased sea surface temperature(SST)recorded over the past two decades.Recently,during February to May 2019,mass bleaching event of corals was documented again in GoM and Palk Bay regions due to increased sea surface temperatures ranged between 32°C to 36°C.Despite of completely bleached corals,some coral colonies of the same bleached coral species have displayed adaptive bleaching pattern(ABP)for survival.This incidence is displayed by the symbiotic zooxanthellae to protect coral polyps from environmental stress such as elevated temperatures.These observations infer that coral colonies with preferential bleaching pattern ability would serve as environmental stress resisting coral colonies which can be used for restoration activities and cryopreservation.Further studies are needed to explain the potential mechanisms or specific environmental drivers responsible for ABP.

Characterization, Acid Activation and Bleaching Performance of Bentonite from Xinjiang

Bentonite produced in Xiazijie, Xinjiang (China) was characterized by X-ray diffraction (XRD), dif- ferential thermal analysis (DTA), thermogravimetric analysis (TG) and cation exchange capacity (CEC). The ben- tonite is composed of dioctahedral montmorillonite with predominant quantity, certain amounts of quartz, feldspar and illite and minor amounts of kaolinite, gypsum, etc. The raw bentonite has a CEC of 0.6497 meq·g-1 and allows to be characterized as typical sodium bentonite. In order to bleach cottonseed oil, optimum conditions for sulfuric acid activation of the raw bentonites were investigated, which were obtained by selecting various acid strength, at 96—98℃ and activating for 4h with 1︰2 solid-liquid ratio. The acid activation bentonites were suitable for decol- orization of cottonseed oil through removing carotene and chlorophyll. The bleaching capabilities of different pig- ments with activated bentonite with treatment of 25% sulfuric acid were 70.3%, 73.1%, 83.2%, 81.8% and 88.9%, respectively. Bleaching with acid activated bentonite gave oils lower peroxide values and acid values.

The effect of cold-light-activated bleaching treatment on enamel surfaces in vitro

This in vitrostudy aims to evaluate the crystal and surface microstructure of dental enamel after cold-light bleaching treatment. Twelve sound human premolars were cross-split into four specimens, namely, mesio-buccal （Group LP）, disto-buccal （Group P）, mesio-lingual （Group NP） and disto-lingual （Group L） specimens. These four groups were treated using the standard cold-light bleaching procedure, a bleaching agent, a peroxide-free bleaching agent and cold-light, respectively. Before and after treatment, all specimens were analyzed by high-resolution, micro-area X-ray diffraction and scanning electron microscopy. Using a spectrometer, tooth color of all specimens was measured before and after treatment. The phase of the enamel crystals was identified as hydroxyapatite and carbonated hydroxyapatite. After treatment, specimens in Groups LP and P showed significantly weaker X-ray diffraction peaks, significant reduction in crystal size and crystallinity, significant increase in L~ but decrease in a＊ and b＊, and obvious alterations in the surface morphology. However, specimens in Groups NP and L did not show any significant changes. The cold-light bleaching treatment leads to demineralization in the enamel surface. The acidic peroxide-containing bleaching agent was the major cause of demineralization, whereas cold-light did not exhibit significant increase or decrease effect on this demineralization.

Recovery of oil and free fatty acids from spent bleaching earth using sub-critical water technology supported with kinetic and thermodynamic study

This work represents the extraction of oil with high free fatty acid content from spent bleaching earth using sub-critical water technology as a greener production pathway. The extraction efficiencies under different conditions were investigated. The studied parameters include temperatures in the range of 180 to 270°C, the feed to solventfeed-to-solvent (in this case water) ratio (1:1, 1:2, 1:3, 1:4 and 1:5) and extraction times in the range of 5-60 minutes. The results showed that the optimum temperature, feed to solventfeed-to-solvent ratio, and extraction time were 270°C, 1:3, and 20 minutes, respectively. In another experiment, the extracted free fatty acids were converted into mono-, di-, and triglycerides through esterification with glycerol to increase the value added of the extracted products. The kinetics of the extraction process was found to be corresponding to an irreversible consecutive unimolecular-type first order reaction, consisting of the extraction step followed by the decomposition reaction step. Both reaction rates of extraction and decomposition were estimated using the reaction rate equations utilizing the nonlinear regression method. The apparent activation energy was calculated to be 46.1 kJ·mol-1. This result indicates a diffusion controlled reaction. For more exploration and deep understanding of the extraction mechanism, other thermodynamic parameters were also calculated and analyzed including,ΔH#, ΔS#, and ΔG# of the extraction step.

Adsorption Behavior of Acid-Leached Clays in Bleaching of Oil

The available data have shown that acid-leached clays had sites for adsorption of impurities in oils. Data obtained on residual impurities in cotton and sunflower-seed oils bleached with the same clay materials produced linear Langmuir and Freundlich isotherms. The increase in constant, k with increase in both temperature of thermal activation and concentration of acid used to leach the clay, suggests that bleaching efficiency increased. The value of n decreased with increase in temperature of activation and concentration of acid used to leach the clay suggesting that bleaching capacity increased. The mineral compositions of the clays influenced their surface, structural and bleaching properties.

Bleaching of Black Human Hair

Bleaching of black human hair has been studied systematically. On the basis of experimental data the technology of human hair bleaching through five processes was established. The optimum technology of improving the whiteness and reducing damage on fibers has been found. The technology can provide good luster,smooth handle and relatively high strength retention to human hair used for wigs or drama articles, meeting the needs of people better. Moreover, it also has important reference value to bleaching of other colored fibers.

Fabrication of Polymer Nonlinear Directional Coupler by Photo-bleaching

The preparation of a nonlinear directional coupler in polymer PMMA/DR1 film by photobleaching is studied. We find it easier to obtain a required coupling length by controlling photo bleaching time than by controlling the dimension of the coupler. The transmittance of each arm is measured when the pulse input light energy changes in our experiment. The experimental results show that the coupling length will change with the intensity of input light due to optical nonlinearities of the polymer PMMA/DR1 at 1 064 nm.

Tentative Research of Short Process of Jute Degumming and Bleaching

The feasibility of combination process of jute degumming and bleaching with alkali-hydrogen peroxide in one-step-one-bath was discussed. The combination process basically has the similar function as the traditional two-step-two-bath method. The factors such as hydrogen peroxide concentration, CBI concentration, sodium hydroxide concentration, treatment time and temperature were studied respectively, and then an orthogonal experiment was designed to study the interactions among the hydrogen peroxide concentration, CBI concentration, sodium hydroxide concentration. After the designed experiments, the optimum treatment conditions were obtained as follows: hydrogen peroxide of 12g/L, sodium hydroxide of 4g/L, CBI of 4g/L, JFC of 1g/L, treatment time of 60min and temperature of 75℃.

Effects of Mg-based Alkaline Peroxide Bleaching on Physical Properties of Poplar Bleached Chemi-thermomechanical Pulp and Its Influence Mechanism

In this study,Mg O was partially used as an alkali source in the peroxide bleaching process of bleached chemi-thermomechanical pulp(BCTMP).The effects of substitution percentage of Mg O for Na OH on the bulk,optical,and physical properties of bleached pulp,and the main effluent characteristics were analyzed.In addition,the influencing mechanism of Mgbased alkali on the strength properties of the BCTMP was further investigated.Strength properties of the BCTMPs were investigated as a function of charge characteristics,fiber morphology,surface lignin content,relative bonding area,and hydrogen bonds of the BCTMP.The results showed that cationic demand(CD) and chemical oxygen demand(COD_(Cr)) of the bleaching effluent decreased as the substitution percentage of Mg O for Na OH increased; meanwhile,the bulk and optical properties of the BCTMP increased.Nevertheless,the strength properties(tensile,tear,and burst indices) of the bleached pulp decreased as the substitution percentage of Mg O for Na OH increased.The decrease in the fiber charge density and increase in the surface lignin content affected the fiber swelling,resulting in a decline in pulp interfibers bonding strength and further loss of the tensile and burst indices.

FT-IR Microspectroscopic Imaging of Cross-Sectioned Human Hair during a Bleaching Process

We investigated bleached human hair by FT-IR microspectroscopy and chemical imaging. The cross sectioned hair is approximately 90 μm in diameter, showed cuticle and cortex in chemical imaging. Differential amide I/II absorbance ratio and broadening amide I band between in the cortex and cuticle were confirmed in FT-IR microspectroscopy and chemical imaging. The cystine monoxide band from the products of disulfide oxidation of the amino acid cystine is associated with hair damaging during bleaching process. With increase bleaching time, the band for cystine monoxide shows more intense and larger area in chemical image. The spatially chemical change was investigated in detail by FT-IR microspectroscopy and chemical imaging during the bleached process.

Effect of Different Bleaching Applications on the Surface Properties and Staining Susceptibility of Dental Composites

The aim of this study was to investigate the effects of two bleaching systems on micro hardness, surface roughness and color stability of two novel dental composites. Ormocer based restorative Admira and nano-filled composite Clearfil Majesty Esthetic were bleached with 10% carbamide peroxide （Opalescence PF） or 35% hydrogen peroxide （Beyond Max 5） and subsequently immersed in four different staining solutions （coffee, tea, red wine, and cola）. Distilled water was used as a control. Color measurements were performed with a spectrophotometer. Vickers micro hardness and roughness data were analyzed with two- way analysis of variance for repeated measures. The analysis of variance was used to compare the color change values. Duncan＇s multiple comparison test was applied to compare the results （a = 5%）. AE~＂ values over 3.3 were considered clinically unacceptable. Micro hardness and surface roughness values of the tested composites were decreased significantly after bleaching applications. Red wine and tea storage caused perceptible discolorations in the composite resin materials after 30 days of 3-hour immersion. Home or office bleaching applications can affect the surface properties of resin composites and accelerate the staining process.

APPLICATIONS OF FLOCCULANT IN BLEACHING AND WASHING OF KAOLIN

The difficulties of washing during the dressing of kaolin ore have been analyzed, the multistep intermittent washing model has been deduced, and effective methods for dealing with the difficulties were put forward. Experimental results show that the bleaching and washing process was enhanced, the washing time was shortened and the consumption of water was reduced by means of adding flocculant.

Treatment of pulpless coloured anterior tooth by bleaching the interior of pulp cavity and filling the cavity with composite

A method of treating pulpless coloured anterior tooth is presented.Most part ofthe coloured dentin of the labial crown was removed and the dental structure was bleachedwith 30% hydrogen peroxide for 5min.The pulp cavity was then filled with whitephoto-curing composite.The result of the treatment is quite satisfactory.With our treatment,the intact contour of the crown and the hardness and gloss of the enamel are preserved.SEM proved that the composite was tightly bound with the enamel of the medial wall of thepulp cavity,forming an entity with the tooth,thus guaranteeing the strength of the crown.

Coral Reef Recovery Status in South Andaman Islands after the Bleaching Event 2010

The Andaman and Nicobar Islands are one of the Union Territories of India, located in the eastern part of the Bay of Bengal. In 2010 summer, the increment in sea surface water temperature （up to 34℃） resulted in the bleaching of about 74% to 77% of corals in the South Andaman. During this event, coral species such as Acropora cerealis, A. humilis, Montipora sp., Favia paIlida, Diploastrea sp., Goniopora sp. Fungia concinna, Gardineroseries sp., Porites sp., Favites abdita and Lobophyllia robusta were severely affected. This study is to assess the recovery status of the reef ecosystem by estimating the percentage of Live Coral cover, Bleached coral cover, Dead coral with algae, Rubble, Sandy fiat, Algal assemblage and other associated organisms, The sedimentation rate （mg cm^-2 d^-1） and coral coverage （%） were assessed during this study period. The average sedimentation rate was ranged between 0.27 and 0.89 mg cm^-2 d^1. The observed post bleaching recovery of coral cover was 21.1% at Port Blair Bay and 13.29% at Havelock Island. The mortality rate of coral cover due to this bleaching was estimated as 2.05% at Port Blair Bay and 9.82% at Havelock Island. Once the sea water temperature resumed back to the normal condition, most of the corals were found recovered.

Applications of Enzyme-simulating Copper Complex Catalyst in Low-temperature Scouring/Bleaching of Cotton Knits

An enzyme-stimulating catalyst( PTL) with copper ions( Cu^(2+)) as the activation center and aminophosphonate as ligand was developed and applied in low-temperature scouring/bleaching of cotton knits. The optimal weight ratio of Cu^(2+) to aminophosphonate was 1 ∶75. Via orthodox and single-factor experiments,the most efficient formula for low-temperature scouring/bleaching was composed of 0. 4 g/L high-efficiency degreaser DM-1130,1. 5 g/L PTL,2. 0 g/L sodium hydroxide( NaOH),and 7. 0 g/L 30% hydrogen peroxide( H_2O_2). The PTL could not only increase the whiteness of cotton knits,but also remove pectin to enhance capillary effect.

Enzymatic Method for Rapid Determination of Oxalic Acid in Bleaching Filtrates from the Pulp and Paper Industry

Bleaching with oxygen-containing agents and recirculation of process streams in the pulp and paper industry has increased the accumulation of oxalic acid and danger for precipitation of calcium oxalate encrusts, scaling. Analysis and control of oxalic acid in bleaching filtrates is therefore becoming increasingly important in the pulp and paper industry. Chromatographic methods, such as IC and HPLC, are generally more time-consuming but are valuable as standard methods for determination of oxalic acid. However, the instrumentation needed is expensive and stationary. In this study, an enzymatic method based on oxalate oxidase and peroxidase was developed to determine oxalic acid in authentic bleaching filtrates using a spectrophotometer. The results showed that bleaching filtrates contain some compounds interfering with the enzymatic method. Pretreatment of the samples with activated charcoal was a successful approach for decreasing problems with interference. By using dilution followed by charcoal treatment, the results obtained from five bleaching filtrates with the colorimetric method correlated very well with those obtained using IC. This study offers a selective, fast and mobile analysis method to determine oxalic acid in bleaching fiRrates from the pulp and paper industry, The convenient enzyme-based method improves the possibilities for control of critical oxalic acid concentrations in closed-loop bleaching streams.

Correlation Analysis between Bleaching Rate of Brain Coral and Trace Elements Contents in Seawater

Brain coral is mainly distributed in the Great Lameshur Bay of the U.S. Virgin Islands in the Caribbean. It has very rare species, but the bleaching pheomenon is severe. In this study, the numbers and bleaching rates of brain corals in the sampling plots were investigated, and the trace elements contents in the seawater were determined with inductively coupled plasma-mass spectrometry （ICP- MS）. Then the correlation between the bleaching rate of brain coral and trace elements contents in seawater was analyzed. The results showed that under temperature of 27.83-28.88 ℃, pH of 8.5-8.7, salinity of 32.74%-34.04% and depth of 0-4 m, there were V, Cr, Rb, Sr, Ag and other trace elements in seawater. When the V content was lower than 99.1 ng/ml, the bleaching rate of brain coral was weakly correlated to V content in seawater; when the Cr content was lower than 23.5 ng/ml, the bleaching rate of brain coral was correlated to Cr content; when the Ag content ranged from 34.1-56.3 ng/ml, there was a significant correlation between bleaching rate of brain coral and Ag content in seawater .

Effects of Temperature, pH, Ammonia Nitrogen Content and Salinity on Coral (Acropora millepora ＆ Palythoa sp. ) Bleaching

This study was conducted to investigate the effects of temperature, pH, ammonia nitrogen content and salinity on the bleaching of Acropora millepora and Palythoa sp. This study included two experiments ： Experiment 1 was designed to test the effects of different gradients of temperature, pH, ammonia nitrogen con- tent and salinity at a time point （6h） on Palythoa sp. breeding; and Experiment 2 tested the effects of different levels of temperature, pH, ammonia nitrogen con- tent and salinity at three time points （24, 48 and 72h） on A. millepora bleaching. Before the experiments, A. millepora and Palythoa sp. were washed with filtered seawater （0.45 p,m microporous membrane filtration） and then reared in interior seawater aquurium cylinder. The experiments were carried out when the coral ten- tacles extended and the growth condition were good. The results showed that under high temperature （32 -40 ~C ） , both A. millepora and Palythoa sp. showed drastic reactions in the course of time, reflecting considerably significant stress responses. The number of releasing zooxanthellae increased with increase or de- creaseof the pH value （pH 0, 4, 6, 10, 12） over time. Meanwhile, a relatively thick layer of mucus was found on the upper zone of the seawater and the corals started to bleach. As the concentration of ammonia nitrogen （ NH4 , 0 mmool/L） increased in the course of time, the number of zooxanthellae floating on A. millepo- ra and Palythoa sp. had the tendency to rise. When the salinity level were at 15%o and 40%o for A. miUepora and below 34‰ for Palythoa sp. , a considerable number of zuoxanthellae floated out and had rising trend in their number over time at 24 -72 h and 6 h, respectively. In this occasion, the corals stopped growing and started to bleach. In conclusion, it revealed that temperature, pH, ammonia nitrogen content and salinity are the potential impact factors on coral breeding. It is suggested that, as temperature, pH value and salinity decrease or increase, as well as anmlonia nitrogen content rises, the quantity of phycobiont would be raised, and the bleaching would be more severe.