Chemically bonded Mn_(0.5)Cd_(0.5)S/BiOBr S-scheme photocatalyst with rich oxygen vacancies for improved photocatalytic decontamination performance

Devising exceptional S-scheme heterojunction photocatalysts utilized in annihilating pharmaceuticals and chromium contamination is significant for addressing the problem of global water pollution.In this work,a chemically bonded Mn0.5Cd_(0.5)S/BiOBr S-scheme heterostructure with oxygen vacancies is ingeniously developed through a facile in-situ solvothermal synthesis.The designed Mn0.5Cd_(0.5)S/BiOBr heterojunction exhibits eminently reinforced photo-activity for destruction of tetracycline hydrochloride and Cr(VI)as compared with its individual components.This substantial photo-redox performance amelioration is benefitted from the creation of an intense internal electric field(IEF)via supplying powerful driving force and migration highway by interfacial chemical bond to foster the S-scheme electron/hole disintegration.More intriguingly,the IEF at the hetero-interface drives the fast consumption of the photo-induced holes in Mn0.5Cd_(0.5)S by the photoelectrons from BiOBr,profoundly boosting the enrichment of active photo-carriers and sparing the photo-corrosion of Mn0.5Cd_(0.5)S.Furthermore,Mn0.5Cd_(0.5)S/BiOBr with exceptional anti-interference property can work efficiently in real water matrices.Multiple uses of the recycled Mn0⋅5Cd0⋅5S/BiOBr evidence its prominent robustness and stability.This achievement indicates the vast potential of chemically bonded S-scheme photosystems with structural defects in the design of photo-responsive materials for effective wastewater treatment.

Microstructural evolution and micro-mechanical properties of non-isothermal solidified zone in TLP bonded Ni-based superalloy joints

Transient liquid phase(TLP)bonding is a promising process for the joining and repairing of nickel-base superalloys.One of the most important parameters in TLP bonding is the bonding time required for suf-ficient isothermal solidification which prevents the formation of undesirable precipitated phases.In the present work,the effect of bonding time on the microstructure,type,and evolution of precipitates in the non-isothermal solidified zone(NSZ)and their effect on micro-mechanical properties were systemat-ically investigated using multi-scale tests in TLP bonded Mar-M247 superalloy joints with Ni-15.2Cr-3.74B interlayer at 1230℃.For a bonding time of 5 min,dual-phase M_(23)(C,B)_(6)-γ/γ’(where M is a mix-ture of Hf,Ta,Cr,and Ni)with eutectic configuration was formed in NSZ.With the increase in bonding time,the evolution of NSZ microstructure can be summed up as eutectic M_(23)(C,B)_(6)-γ/γ’,semi-striping dual-phase M_(23)(C,B)_(6)-γ/γ’,discontinuously striping M_(23)(C,B)_(6)-γ/γ’,followed by the disintegration of NSZ.As the NSZ counterpart,the isothermal solidified zone(ISZ)is mainly composed ofγ/γ’.Ac-companied by the dissolution of M_(23)(C,B)_(6) in the centerline,the proportion of the ISZ increases greatly until the joints are completely occupied by ISZ.Finally,a bamboo-like structure with domain size of-100μm was formed in the joint centerline,along withγ’reorganized themselves all into cubic shapes and distributed homogeneously.Mechanical property tests demonstrated that in comparison to samples with longer bonding time,the NSZ of the shortest bonding time(5 min)has the highest strength and a subsequent decrease in strength was observed with prolonging the bonding time and post-bond heat treatment.Furthermore,possible solidification/transformation path,segregation behavior,and formation mechanism of NSZ/ISZ evolution were discussed.

Chemically bonded BiVO_(4)/Bi_(19)Cl_(3)S_(27) heterojunction with fast hole extraction dynamics for continuous CO_(2) photoreduction

Surface charge localization and inferior charge transfer efficiency seriously restrict the supply of reactive hydrogen and the reaction dynamics of CO_(2) photoreduction performance of photocatalysts.Herein,chemically bonded BiVO_(4)/Bi_(19)Cl_(3)S_(27)(BVO/BCS)S-scheme heterojunction with a strong internal electric field is designed.Experimental and density function theory calculation results confirm that the elaborated heterojunction accelerates the vectorial migration of photogenerated charges from BiVO_(4) to Bi_(19)Cl_(3)S_(27) via the interfacial chemical bonding interactions(i.e.,Bi-O and Bi-S bonds)between Bi atoms of BVO and S atoms of BCS or Bi atoms of BCS and O atoms of BVO under light irradiation,breaking the interfacial barrier and surface charge localization of Bi_(19)Cl_(3)S_(27),and further decreasing the energy of reactive hydrogen generation,CO_(2) absorption and activation.The separation efficiency of photogenerated carriers is much more efficient than that counterpart individual in BVO/BCS S-scheme heterojunction system.As a result,BVO/BCS heterojunction exhibits a significantly improved continuous photocatalytic performance for CO_(2) reduction and the 24 h CO yield reaches 678.27μmol⋅g^(-1).This work provides an atomic-level insight into charge transfer kinetics and CO_(2) reduction mechanism in S-scheme heterojunction.

High mechanical strength Si anode synthesis with interlayer bonded expanded graphite structure for lithium-ion batteries

Despite advancements in silicon-based anodes for high-capacity lithium-ion batteries,their widespread commercial adoption is still hindered by significant volume expansion during cycling,especially at high active mass loadings crucial for practical use.The root of these challenges lies in the mechanical instability of the material,which subsequently leads to the structural failure of the electrode.Here,we present a novel synthesis of a composite combining expanded graphite and silicon nanoparticles.This composite features a unique interlayer-bonded graphite structure,achieved through the application of a modified spark plasma sintering method.Notably,this innovative structure not only facilitates efficient ion and electron transport but also provides exceptional mechanical strength(Vickers hardness:up to658 MPa,Young's modulus:11.6 GPa).This strength effectively accommodates silicon expansion,resulting in an impressive areal capacity of 2.9 mA h cm^(-2)(736 mA h g^(-1)) and a steady cycle life(93% after 100cycles).Such outsta nding performance is paired with features appropriate for large-scale industrial production of silicon batteries,such as active mass loading of at least 3.9 mg cm^(-2),a high-tap density electrode material of 1.68 g cm^(-3)(secondary clusters:1.12 g cm^(-3)),and a production yield of up to 1 kg per day.

Effect of interlayer bonded bilayer graphene on friction

We study the friction properties of interlayer bonded bilayer graphene by simulating the movement of a slider on the surface of bilayer graphene using molecular dynamics.The results show that the presence of the interlayer covalent bonds due to the local sp^(3) hybridization of carbon atoms in the bilayer graphene seriously reduces the frictional coefficient of the bilayer graphene surface to 30%,depending on the coverage of interlayer sp^(3) bonds and normal loads.For a certain coverage of interlayer sp3bonds,when the normal load of the slider reaches a certain value,the surface of this interlayer bonded bilayer graphene will lose the friction reduction effect on the slider.Our findings provide guidance for the regulation and manipulation of the frictional properties of bilayer graphene surfaces through interlayer covalent bonds,which may be useful for applications of friction related graphene based nanodevices.

Exploring Dry-out Behaviour and Explosion Resistance of Microsilica-gel Bonded No-cement Castables

Cement-free castables have attracted significant attention due to their superior thermal-mechanical properties and rapid dry-out in comparison to cement-bonded refractory castables.However,drying industrial-scale specimens can pose more challenges than lab-scale samples.In this study,the dry-out behavior and explosion resistance of microsilica-gel bonded nocement castables(NCCs)were investigated on both lab-and industrial-scale specimens,employing various drying agents.First,the fast dry-out mechanism was assessed using thermogravimetric analysis(TGA),differential scanning calorimetry(DSC),and scanning electron microscopy(SEM)on lab-scale small samples.Then,the drying behavior of industrial-scale large samples(300 mm×300 mm×300 mm cubes,approximately 80 kg)was studied using a unique macro-thermo-balance(macro-TGA).The results showed that EMSIL-DRY^(®)reduced the temperature level for maximum dewatering rate and effectively prevented explosions during heat-up,compared to other polymer fibres.The use of a specialty drying agent(EMSIL-DRY^(®))significantly improved the explosion resistance,as demonstrated by the production of a perfect 400 kg block fired to 850℃at a rate of 50℃·h^(-1).This research contributes to the understanding and application of cement-free castables in industrial settings.

Bonding interface characteristic and shear strength of diffusion bonded Ti-17 titanium alloy

The bonding interface characteristic and shear strength of diffusion bonded Ti-17 titanium alloy at different bonding time were investigated. The results show that the average size of voids decreases while the amount of voids decreases after increasing to the maximum value with the increasing bonding time. The irregular void with a scraggly edge tends to an ellipse void with smooth surface and then changes to a tiny void with round shape. The grains across bonding interface occur at bonding time of 60 min. The shear strength of bond increases with increasing bonding time, and the highest shear strength of bond is 887.4 MPa at 60 min. The contribution of plastic deformation on the void closure and the increase of shear strength is significant even though the action time of plastic deformation is short.

Interfacial structure and mechanical properties of hot-roll bonded joints between titanium alloy and stainless steel using niobium interlayer

The hot-roll bonding was carried out in vacuum between titanium alloy and stainless steel using niobium interlayer. The interfacial structure and mechanical properties were analyzed. The results show that the plasticity of bonded joint is improved significantly. When the bonding temperature is 800 °C or 900 °C, there is not intermetallic layer at the interface between stainless steel and niobium. When the bonding temperature is 1000 °C or 1050 °C, Fe-Nb intermetallic layer forms at the interface. When the bonding temperature is 1050 °C, cracking occurs between stainless steel and intermetallic layer. The maximum strength of -417.5 MPa is obtained at the bonding temperature of 900 °C, the reduction of 25% and the rolling speed of 38 mm/s, and the tensile specimen fractures in the niobium interlayer with plastic fracture characteristics. When the hot-roll bonded transition joints were TIG welded with titanium alloy and stainless steel respectively, the tensile strength of the transition joints after TIG welding is -410.3 MPa, and the specimen fractures in the niobium interlayer.

Effect of joining temperature on microstructure and properties of diffusion bonded Mg/Al joints

The joining of AZ31B Mg alloy to 6061 Al alloy was investigated at different joining temperatures by vacuum diffusion bonding method. The microstructures of Mg/Al dissimilar joints were studied by means of optical microscopy （OM）, scanning electron microscopy （SEM） and energy dispersive X-ray （EDX）. The results show that the thickness of each layer in the diffusion zone increases with the increase of joining temperature, and the microstructure changes obviously. At joining temperature of 440 °C, the diffusion zone is composed of Mg2Al3 layer and Mg17Al12 layer. At joining temperatures of 460 and 480 °C, the diffusion zone is composed of Mg2Al3 layer, Mg17Al12 layer, eutectic layer of Mg17Al12 and Mg-based solid solution. The width of high-hardness zone in the joint increases with increasing joining temperature, and the micro-hardnesses at different locations in the diffusion zone are significantly different. The joining temperature of 440 °C offers the highest tensile strength of 37 MPa, and the corresponding joint exhibits brittle fracture at the intermetallic compound layer of Mg17Al12.

Effect of grain size of primary α phase on bonding interface characteristic and mechanical property of press bonded Ti-6Al-4V alloy

The effect of grain size of primary α phase on the bonding interface characteristic and shear strength of bond was investigated in the press bonding of Ti-6Al-4V alloy. The quantitative results show that the average size of voids increases from 0.8 to 2.6 μm and the bonding ratio decreases from 90.9% to 77.8% with an increase in grain size of primary α phase from 8.2 to 16.4 μm. The shape of voids changes from the tiny round to the irregular strip. The highest shear strength of bond can be obtained in the Ti-6Al-4V alloy with a grain size of 8.2 μm. This is contributed to the higher ability of plastic flow and more short-paths for diffusion in the alloy with smaller grain size of primary α phase, which promote the void closure process and the formation of α/β grains across bonding interface.

Effect of intermetallic compounds on heat resistance of hot roll bonded titanium alloy-stainless steel transition joint

The effect of intermetallic compounds on the heat resistance of transition joint was investigated. The experiment of post-weld heat treatment for the hot roll bonded titanium alloy-stainless steel joint using nickels interlayer was carried out, and the interface microstructure evolution due to heat treatment was presented. There was not found significant interdiffusion at stainless steel/nickel interface, when the specimens were heat treated in the temperature range of 600-800 °C for 10 and 30 min, while micro-cracks occurred at the stainless steel/nickel interface heat treated at 700 °C for 30 min. The thickness of intermetallic layers at nickel/titanium alloy interface increased at 600 °C, and micro-cracks occurred at 700 and 800 °C. The micro-cracks occurred between intermetallic layers or between intermetallic layer and nickel interlayer as well. The tensile strength of the transition joint decreased with the increase of heat treatment temperature or holding time.

Microstructures and interfacial quality of diffusion bonded TC21 titanium alloy joints

Diffusion bonding of TC21 titanium alloy was carried out at temperature ranging from 780 ℃ to 980 ℃ for 5-90 min.The interfacial bonding ratio,deformation ratio,microstructures and microhardness of the diffusion bonded joints were investigated.Results show that joints with high bonding quality can be obtained when bonded at 880 ℃ for 15？30 min.The microhardness increases with increasing the bonding temperature,while it has a peak value（HV367） when bonding time is prolonged up to 90 min.Fully equiaxed microstructures,bi-modal microstructures and fully lamellar microstructures were observed when bonded in temperature range of 780-880 ℃,at 930 ℃ or 980 ℃,respectively.The volume fraction of α phase first increases and achieves the maximum when bonded at 880 ℃ for 60 min,and then descended.

Thermal decomposition and kinetics of plastic bonded explosives based on mixture of HMX and TATB with polymer matrices

This work describes thermal decomposition behaviour of plastic bonded explosives(PBXs) based on mixture of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX) and 2,4,6-triamino-1,3,5-trinitrobenzene(TATB)with Viton A as polymer binder. Thermal decomposition of PBXs was undertaken by applying simultaneous thermal analysis(STA) and differential scanning calorimetry(DSC) to investigate influence of the HMX amount on thermal behavior and its kinetics. Thermogravimetric analysis(TGA) indicated that the thermal decomposition of PBXs based on mixture of HMX and TATB was occurred in a three-steps. The first step was mainly due to decomposition of HMX. The second step was ascribed due to decomposition of TATB, while the third step was occurred due to decomposition of the polymer matrices. The thermal decomposition % was increased with increasing HMX amount. The kinetics related to thermal decomposition were investigated under non-isothermal for a single heating rate measurement. The variation in the activation energy of PBXs based on mixture of HMX and TATB was observed with varying the HMX amount. The kinetics from the results of TGA data at various heating rates under non-isothermal conditions were also calculated by Flynn—Wall—Ozawa(FWO) and Kissinger-Akahira-Sunose(KAS)methods. The activation energies calculated by employing FWO method were very close to those obtained by KAS method. The mean activation energy calculated by FWO and KAS methods was also a good agreement with the activation energy obtained from single heating rate measurement in the first step decomposition.

Effects of nano TiN addition on the microstructure and mechanical properties of TiC based steel bonded carbides

TiC based steel bonded carbides with the addition of nano TiN were prepared by vacuum sintering techniques.The microstructure was investigated using scanning electron microscopy（SEM） and transmission electron microscopy（TEM）,and the mechanical properties,such as bending strength,impact toughness,hardness,and density,were measured.The results indicate that the grain size becomes small and there is uniformity in the steel bonded carbide with nano addition;several smaller carbide particles are also found to be inlaid in the rim of the larger carbide grains and prevent the coalescence of TiC grains.The smaller and larger carbide grains joint firmly,and then the reduction of the average size of the grains leads to the increase in the mechanical properties of the steel bonded carbides with nano addition.But the mechanical properties do not increase monotonously with an increase in nano addition.When the nano TiN addition accounts for 6-8 wt.% of the amount of steel bonded carbides,the mechanical properties reach the maximum values and then decrease with further increase in nano TiN addition.

Properties of sodium silicate bonded sand hardened by microwave heating

The sodium silicate bonded sand hardened by microwave heating has many advantages,such as low sodium silicate adding quantity,fast hardening speed,high room temperature strength,good collapsibility and certain surface stability.However,it has big moisture absorbability in the air,which would lead to the compression strength and the surface stability of the sand molds being sharply reduced.In this study,the moisture absorbability of the sodium silicate bonded sand hardened by microwave heating in different humidity conditions and the effect factors were investigated.Meanwhile,the reasons for the big moisture absorbability of the sand were analyzed.Some measures to overcome the problems of high moisture absorbability,bad surface stability and sharply reducing strength in the air were discussed.The results of this study establish the foundation of green and clean foundry technology based on the microwave heating hardening sodium silicate sand process.

Mode-I fracture and durability of FRP-concrete bonded interfaces

In this study, a work-of-fracture method using a three-point bend beam （3PBB） specimen, which is commonly used to determine the fracture energy of concrete, was adapted to evaluate the mode-I fracture and durability of fiber-reinforced polymer （FRP） composite-concrete bonded interfaces. Interface fracture properties were evaluated with established data reduction procedures. The proposed test method is primarily for use in evaluating the effects of freeze-thaw （F-T） and wet-dry （W-D） cycles that are the accelerated aging protocols on the mode-I fracture of carbon FRP-concrete bonded interfaces. The results of the mode-I fracture tests of F-T and W-D cycle-conditioned specimens show that both the critical load and fracture energy decrease as the number of cycles increases, and their degradation pattern has a nearly linear relationship with the number of cycles. However, compared with the effect of the F-T cycles, the critical load and fracture energy degrade at a slower rate with W-D cycles, which suggests that F-T cyclic conditioning causes more deterioration of carbon fiber-reinforced polymer （CFRP）-concrete bonded interface. After 50 and 100 conditioning cycles, scaling of concrete was observed in all the specimens subjected to F-T cycles, but not in those subjected to W-D cycles. The examination of interface fracture surfaces along the bonded interfaces with varying numbers of F-T and W-D conditioning cycles shows that （1） cohesive failure of CFRP composites is not observed in all fractured surfaces; （2） for the control specimens that have not been exposed to any conditioning cycles, the majority of interface failure is a result of cohesive fracture of concrete （peeling of concrete from the concrete substrate）, which means that the cracks mostly propagate within the concrete; and （3） as the number of F-T or W-D conditioning cycles increases, adhesive failure along the interface begins to emerge and gradually increases. It is thus concluded that the fracture properties （i.e., the critical load and fracture energy） of the bonded interface are controlled primarily by the concrete cohesive fracture before conditioning and by the adhesive interface fracture after many cycles of F-T or W-D conditioning. As demonstrated in this study, a test method using 3PBB specimens combined with a fictitious crack model and experimental conditioning protocols for durability can be used as an effective qualification method to test new hybrid material interface bonds and to evaluate durability-related effects on the interfaces.

Recycle for Sludge Scrap of Nd-Fe-B Sintered Magnet as Isotropic Bonded Magnet

The reduction diffusion method was performed for the sludge scrap of Nd-Fe-B sintered magnets with adding Ca metal to recover the oxidized Nd-Fe-B phase. After washing the resultant powders to remove Ca metal component, the powders obtained were recycled as an isotropic magnetic powder by the melt spinning method. The magnetic properties of powders as recycled were inferior, especially for the coercivity value, due to the deletion of rare earth metals during the washing process. The adjustment of metal composition, i.e., the addition of Nd metal, at the melt spinning process improved the magnetic properties to be B r=～0.75 T, H cj=～0.93 mA·m -1, and (BH) max=～91 kJ·m -3. The magnetic properties of the bonded magnets prepared from the composition-adjusted powders were B r=～0.66 T, H cj=～0.92 mA·m -1, and (BH) max=～70 kJ·m -3, which are approximately comparable to the commercially available MQPB boned one (B r=～0.73 T, H cj=～0.79 mA·m -1, and (BH) max=～86 kJ·m -3).

Investigation on the Moldability of HDDR NdFeB Bonded Magnet Prepared by Compression Molding Method

The phenomenon of uneven density distribution is inevitable in the process of preparing bonded magnets with complicated shape or with large geometric size by compression molding due to the friction among magnetic powder grains and between magnetic powder and the die wall, which reduces the pressure along the compression direction. In order to improve the density distribution homogeneity, the thin wall rings with composition of HDDR NdFeB prepared by compression molding were selected as the investigated object in this study. It was systematically investigated on the effect of addition level of lubricants and the addition methods of lubricants and strengthener on magnet density, density distribution and on magnet strength. By means of joint addition of lubricants and strengthener, which increases the magnet density and improves the magnet density distribution under the precondition of keeping the magnet strength unreduced. Thus the moldability of the bonded magnets is improved.

Effect of bonding process on the properties of isotropic epoxy resin-bonded Nd-Fe-B magnets

Bonded NdFeB magnets were prepared by compression molding. The effect of preparation technology on their magnetic and mechanical properties was studied through the analysis of density, Br, Hcj, （BH）max, bending strength, and compressive strength of the bonded magnets. The results showed that the magnetic properties decreased with increasing binder content, whereas the mechanical properties increased. Br and （BH）max increased with rising pressure, whereas Hcj decreased. For a fixed mass fraction of the binder, the optimal pressure was 620 MPa and the best thermosetting temperature was 160°C. These conditions made the bonded magnets have the optimal mechanical properties. Scanning electron microscopy （SEM） analyses of the fracture surfaces indicated that the epoxy resin bonded magnets exhibited brittle behavior.

Ultrasonic Evaluation of the Impact Damage of Polymer Bonded Explosives

The damage properties of polymer bonded explosives under dynamic loading were studied by using ultrasonic evaluation. Explosive samples were damaged by a low-velocity gas gun at different impact velocities. Ultrasonic examination was carried out with a pulse through-transmission method. Spectra analyses were carried out by using fast Fourier transform. Characteristic ultrasonic parameters, including ultrasonic velocities, attenuation coefficients, spectra area and master frequency, were obtained. The correlation between the impact damage and ultrasonic parameters was analyzed. A damage coefficient D was defined by considering a combination of ultrasonic velocity and amplitude. The results show that ultrasonic parameters can be used to quantitatively assess the damage extent in impacted plastic bonded explosives..